| Age | Commit message (Collapse) | Author |
|---|
|
The mmc controller of the IPQ6018 does not support HS400 mode.
So adjust the maximum clock frequency of sdcc to 200 MHz (HS200).
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240620150122.1406631-2-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge SM8650 video and camera clock drivers through topic branch, to
make available the DeviceTree binding includes to the DeviceTree source
branches as well.
|
|
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-8-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support to the SM8650 video clock controller by extending
the SM8550 video clock controller, which is mostly identical
but SM8650 has few additional clocks and minor differences.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-5-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for videocc XO clk ares for consumer drivers to be
able to request this reset.
Fixes: f53153a37969 ("clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550")
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-4-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All configuration options are under the big "Renesas SoC clock support"
umbrella, so there is no reason to repeat this for each driver.
Hence drop "Renesas" from the few that do.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/185323de4d38b9b599775c1b64ce4171551b98d5.1718177124.git.geert+renesas@glider.be
|
|
The multipliers for PLL2 and PLL4 as listed in the comments for
the cpg_pll_configs[] array are incorrect. Fix them.
Note that the actual values in the tables were correct.
Fixes: f077cab34df3010d ("clk: renesas: cpg-mssr: Add support for R-Car V4M")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/07126b55807c1596422c9547e72f0a032487da1e.1718177076.git.geert+renesas@glider.be
|
|
Update wait_val fields as per the default hardware values of the GDSC as
otherwise it would lead to GDSC FSM state stuck causing power on/off
failures of the GSDC.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-6-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The RCG's clk src has to be parked at XO while disabling as per the
HW recommendation, hence use clk_rcg2_shared_ops to achieve the same.
Also gpu_cc_cb_clk is recommended to be kept always ON, hence use
clk_branch2_aon_ops to keep the clock always ON.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-5-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GPU clocks/GDSCs have been marked critical from the clock driver
but the GPU driver votes on these resources as per the HW requirement.
In the case where these clocks & GDSCs are left enabled, would have
power impact and also cause GPU stability/corruptions.
Fix the same by removing the CLK_IS_CRITICAL for clocks and ALWAYS_ON
flags for the GPU GDSCs.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-4-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the force mem core bit for UFS ICE clock to force the core on
signal to remain active during halt state of the clk. If force mem
core bit of the clock is not set, the memories of the subsystem will
not retain the logic across power states.
Fixes: 08c51ceb12f7 ("clk: qcom: add the GCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-3-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the GDSC wait_val fields as per the default hardware values as
otherwise they would lead to GDSC FSM state to be stuck and causing
failures to power on/off. Also add the GDSC flags as applicable and
add support to control PCIE GDSC's using collapse vote registers.
Fixes: 08c51ceb12f7 ("clk: qcom: add the GCC driver for sa8775p")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-2-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The UFS hw ctl clocks are not used by any consumers on SA8775P,
and these clocks are not using the correct clock ops to manage the
hw ctl of the branch clock, hence remove these clocks.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-1-adcc756a23df@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The RCG's clk src has to be parked at XO while disabling as per the
HW recommendation, hence use clk_rcg2_shared_ops to achieve the same.
Fixes: 160758b05ab1 ("clk: qcom: add support for SM8350 GPUCC")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Link: https://lore.kernel.org/r/20240621-sm8350-gpucc-fixes-v1-1-22db60c7c5d3@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606161028.2986587-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The SFC IP exists only in RK3128 version of the SoC, thus the clock gets
added to rk3128_clk_branches.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240606143401.32454-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the GPADC required clock and reset which is used for the onboard
GPADC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240605172049.231108-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The clock controller driver of QCA8K depends on MDIO_BUS because
of mdio_module_driver used to register the driver.
This patch fixes the following undefined symbols.
ERROR: modpost: "mdio_driver_register"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "mdio_driver_unregister"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_write"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_read"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406161634.B27sOs8B-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406162047.QkUMa2fG-lkp@intel.com/
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240617093806.3461165-1-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 8cab033628b1 ("clk: qcom: Add QCM2290 GPU clock controller driver")
adds the config CLK_QCM2290_GPUCC, which intends to select the support for
the QCM2290 Global Clock Controller. It however selects the non-existing
config CLK_QCM2290_GCC, whereas the config for the QCM2290 Global Clock
Controller is named QCM_GCC_2290.
Adjust the config to the intended one.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Fixes: 8cab033628b1 ("clk: qcom: Add QCM2290 GPU clock controller driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240620201431.93254-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This symbol is selected by a couple drivers, but isn't used by anyone
and hasn't been for years now. Drop it.
No functional change intended.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240619-drop-qcom-rpmcc-v1-1-b487c95162ef@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606161028.2986587-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add the missing MODULE_DESCRIPTION() in the Amlogic clock modules missing
it.
Reported-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Closes: https://lore.kernel.org/linux-clk/964210f1-671f-4ecc-bdb7-3cf53089c327@quicinc.com
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240611133512.341817-1-jbrunet@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add a driver for the SOPHGO SG2042 clocks.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add a driver for the GPU clock controller block found on the QCM2290 SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-3-4bc0c19da4af@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 134b55b7e19f ("clk: qcom: support Huayra type Alpha PLL")
introduced an entry to the alpha offsets array, but diving into QCM2290
downstream and some documentation, it turned out that the name Huayra
apparently has been used quite liberally across many chips, even with
noticeably different hardware.
Introduce another set of offsets and a new configure function for the
Huayra PLL found on QCM2290. This is required e.g. for the consumers
of GPUCC_PLL0 to properly start.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-2-4bc0c19da4af@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clock controller driver of qca8386/qca8084 is registered
as the MDIO device, the hardware register is accessed by MDIO bus
that is normally used to access general PHY device, which is
different from the current existed qcom clock controller drivers
using ioremap to access hardware clock registers, nsscc-qca8k is
accessed via an MDIO bus.
MDIO bus is commonly utilized by both qca8386/qca8084 and other
PHY devices, so the mutex lock mdio_bus->mdio_lock should be
used instead of using the mutex lock of remap.
To access the hardware clock registers of qca8386/qca8084, there
is a special MDIO frame sequence, which needs to be sent to the
device.
Enable the reference clock before resetting the clock controller,
the reference clock rate is fixed to 50MHZ.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-5-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The previous wrapper qcom_cc_really_probe takes the platform
device as parameter, which is limited to platform driver.
As for qca8k clock controller driver, which is registered as
the MDIO device, which also follows the qcom clock framework.
To commonize qcom_cc_really_probe, updating it to take the
struct device as parameter, so that the qcom_cc_really_probe
can be utilized by the previous platform device and the new
added MDIO device.
Also update the current clock controller drivers to take
&pdev->dev as parameter when calling qcom_cc_really_probe.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the clk_branch2_prepare_ops for supporting clock controller
where the hardware register is accessed by MDIO bus, and the
spin lock can't be used because of sleep during the MDIO
operation.
The clock is enabled by the .prepare instead of .enable when
the clk_branch2_prepare_ops is used.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-2-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull ARM and clkdev fixes from Russell King:
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
clkdev: don't fail clkdev_alloc() if over-sized
|
|
Add the VIN module clocks, which are used by the VIN modules on the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240606170858.1694652-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
|
When dealing with certain PLLs, it is necessary to avoid modifying them
if they have already been initialized by lower levels. For instance, in
the A1 SoC Family, the sys_pll is enabled as the parent for the cpuclk,
and it cannot be disabled during the initialization sequence. Therefore,
initialization phase must be skipped.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240515185103.20256-2-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
In order to get rid of CLK_NR_CLKS and be able to drop it from the
bindings, use rockchip_clk_find_max_clk_id helper to find the highest
clock id.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240606143401.32454-3-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A static spinlock can be initialized automatically with
DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init().
Suggested-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/8da2c908f00043f05f7e26e3c26400aea0cfe8bc.1716975021.git.geert+renesas@glider.be
|
|
A global spinlock can be initialized automatically with
DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init().
Suggested-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/9073a6bfb7791e492156331fa8a0ea87a7c7cef6.1716975021.git.geert+renesas@glider.be
|
|
R-Car Gen3 Socs use the common CPG/MSSR library functions in
rcar-cpg-lib.c, so the R-Car V3M sub-driver can use the common cpg_lock
instead of a driver-private lock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/0cd9b5ffbe986bd7dc4ffb3f13492123432ee2e1.1716975021.git.geert+renesas@glider.be
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table. Clocks are considered core
components, so usually they are built-in, however these can be built and
used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240604130531.170371-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Don't fail clkdev_alloc() if the strings are over-sized. In this case,
the entry will not match during lookup, so its useless. However, since
code fails if we return NULL leading to boot failure, return a dummy
entry with the connection and device IDs set to "bad".
Leave the warning so these problems can be found, and the useless
wasteful clkdev registrations removed.
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries")
Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net.
Link: https://lore.kernel.org/r/28114882-f8d7-21bf-4536-a186e8d7a22a@w6rz.net
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
'gates_data' (and it's associated define) are unused since
commit ee38b2698ae2 ("clk: sunxi: Add a simple gates driver").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240509230516.86023-1-linux@treblig.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sunxi-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/suniv-f1c100s-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun20i-d1-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun20i-d1-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a64-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a100-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a100-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h6-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h6-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h616-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun4i-a10-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun6i-a31-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun6i-rtc-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a23-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a33-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a83t-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-h3-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-r40-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-v3s-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-de2-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-de-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-usb-ccu.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240603-md-drivers-clk-sunxi-ng-v1-1-c44a4c22d544@quicinc.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the C3 peripherals clock controller driver in the C3 SoC family.
[jbrunet: fix Kconfig select order and probe function name]
Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240522082727.3029656-6-xianwei.zhao@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add the C3 PLL clock controller driver for the Amlogic C3 SoC family.
[jbrunet: fixed probe function name]
Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240522082727.3029656-5-xianwei.zhao@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add a MODULE_DESCRIPTION() on all drivers that miss it to avoid
modpost warnings.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240528121320.160685-1-angelogioacchino.delregno@collabora.com
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-gate_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-fractional-divider_test.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-clk-test-v1-1-a6afd4793337@quicinc.com
[sboyd@kernel.org: Reword header and description]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sprd/clk-sprd.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-clk-sprd-v1-1-de0884ea6fc7@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sophgo/clk-sophgo-cv1800.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240601-md-drivers-clk-sophgo-clk-sophgo-cv1800-v1-1-8e00d8c3a87b@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add ck_icn_p_iwdg1, ck_icn_p_pka, ck_icn_p_rng, ck_icn_p_saes,
ck_icn_p_serc clocks.
They could be configured for non secured world.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240529131310.260954-3-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use an STM32 access controller to filter the registration of clocks.
If a clock is used by the security world, then it must not registered.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240529131310.260954-2-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Update peripherals pwm_j_div's parent clock to pwm_j_mux
Fixes: 57b55c76aaf1 ("clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240516071612.2978201-1-xianwei.zhao@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The fixed_pll_dco output frequency is not accurate,
add frac factor for fixed_pll_dco clk to fix it.
Fixes: 57b55c76aaf1 ("clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240603-s4_fixedpll-v1-1-2b2a98630841@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
