| Age | Commit message (Collapse) | Author |
|---|
|
When (ARCH_STARFIVE [=n] && COMPILE_TEST [=y] && RESET_CONTROLLER [=n]),
RESET_STARFIVE_JH7110 can't be selected by CLK_STARFIVE_JH7110_SYS
and CLK_STARFIVE_JH7110_AON.
Add a condition `if RESET_CONTROLLER` to fix it. Also, delete redundant
selected options of CLK_STARFIVE_JH7110_AON because these options are
already selected by the dependency.
Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver")
Fixes: b2ab3c94f41f ("clk: starfive: Add StarFive JH7110 always-on clock driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230418123756.62495-2-hal.feng@starfivetech.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The dev_set_drvdata() is no longer needed after we used a wrapper
struct to get the data in auxiliary driver.
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Fixes: d1aae0663023 ("clk: starfive: Avoid casting iomem pointers")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230417074115.30786-3-hal.feng@starfivetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Let's use a wrapper struct for the auxiliary_device made in
jh7110_reset_controller_register() so that we can stop casting iomem
pointers. The casts trip up tools like sparse, and make for some awkward
casts that are largely unnecessary. While we're here, change the
allocation from devm and actually free the auxiliary_device memory in
the release function. This avoids any use after free problems where the
parent device driver is unbound from the device but the
auxiliuary_device is still in use accessing devm freed memory.
Cc: Tommaso Merciai <tomm.merciai@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Hal Feng <hal.feng@starfivetech.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230413205528.4044216-1-sboyd@kernel.org
|
|
Add driver for the StarFive JH7110 always-on clock controller
and register an auxiliary device for always-on reset controller
which is named as "rst-aon".
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add driver for the StarFive JH7110 system clock controller and
register an auxiliary device for system reset controller which
is named as "rst-sys".
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Rename some variables from "jh7100" or "JH7100" to "jh71x0"
or "JH71X0".
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h for making
the code to be common.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The clock control registers on the StarFive JH7100 and JH7110 work
identically, so factor out the code then drivers for the two SoCs
can share it without depending on each other. No functional change.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Using ARCH_FOO symbol is preferred than SOC_FOO.
Set obj-y for starfive/ in Makefile, so the StarFive drivers
can be compiled with COMPILE_TEST=y but ARCH_STARFIVE=n.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add a driver for the audio clocks on the Starfive JH7100 RISC-V SoC.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-8-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Unlike the system clocks there are audio clocks that combine both
multiplexer/divider and gate/multiplexer/divider, so add support for
that.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-7-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The JH7100 has additional audio and video clocks at different memory
ranges, but they use the same register layout. Add a header and export
the starfive_jh7100_clk_ops function so the clock implementation can be
reused by drivers handling these clocks.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-6-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
It turns out the audio_div clock is a fractional divider where the
lowest byte of the ctrl register is the integer part of the divider and
the 2nd byte is the number of 100th added to the divider.
The children of this clock is used by the audio peripherals for their
sample rate clock, so round to the closest possible rate rather than
always rounding down like regular dividers.
Fixes: 4210be668a09 ("clk: starfive: Add JH7100 clock generator driver")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-3-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The problem is best illustrated by an example. Suppose a consumer wants
a 4MHz clock rate from a divider with a 10MHz parent. It would then
call
clk_round_rate(clk, 4000000)
which would call into our determine_rate() callback that correctly
rounds up and finds that a divisor of 3 gives the highest possible
frequency below the requested 4MHz and returns 10000000 / 3 = 3333333Hz.
However the consumer would then call
clk_set_rate(clk, 3333333)
but since 3333333 doesn't divide 10000000 evenly our set_rate() callback
would again round the divisor up and set it to 4 which results in an
unnecessarily low rate of 2.5MHz.
Fix it by using DIV_ROUND_CLOSEST in the set_rate() callback.
Fixes: 4210be668a09 ("clk: starfive: Add JH7100 clock generator driver")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-2-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the StarFive JH7100 clock generator.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
