summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom/clk-alpha-pll.c
AgeCommit message (Collapse)Author
2020-10-13clk/qcom: fix spelling typoWang Qing
Modify the comment typo: "compliment" -> "complement". Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1600930506-394-1-git-send-email-wangqing@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pllJonathan Marek
Lucid PCAL_DONE is different from trion. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-5-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: same regs and ops for trion and lucidJonathan Marek
Fixed ops were already identical, this adds support for non-fixed ops by sharing between trion and lucid. This also changes the names for trion ops to be consistent with the rest. Note LUCID_PCAL_DONE is renamed to TRION_PCAL_DONE because it is wrong for lucid, LUCID_PCAL_DONE should be BIT(27). Next patch will address this. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-4-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VALJonathan Marek
0x44 isn't a register offset, it is the value that goes into CAL_L_VAL. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-09clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLsTaniya Das
Add programming sequence support for managing the Lucid PLLs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200224045003.3783838-4-vkoul@kernel.org Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-09clk: qcom: clk-alpha-pll: Refactor trion PLLTaniya Das
Remove duplicate function for calculating the round rate of PLL and also update the trion pll ops to use the common function. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200224045003.3783838-3-vkoul@kernel.org Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-09clk: qcom: clk-alpha-pll: Use common names for definesTaniya Das
The PLL run and standby modes are similar across the PLLs, thus rename them to common names and update the use of these. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200224045003.3783838-2-vkoul@kernel.org Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-12clk: qcom: alpha-pll: Make error prints more informativeStephen Boyd
I recently ran across this printk error message spewing in my logs Call set rate on the PLL with rounded rates! and I had no idea what clk that was or what rate was failing to round properly. Make the printk more informative by telling us what went wrong and also add the name of the clk that's failing to change rate. Furthermore, update the other printks in this file with the clk name each time so we know what clk we're talking about. Cc: Taniya Das <tdas@codeaurora.org> Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lkml.kernel.org/r/20200205065421.9426-1-swboyd@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-23clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibrationTaniya Das
In the cases where the PLL is not calibrated the PLL could fail to lock. Add support for prepare ops which would take care of the same. Fabia PLL user/test control registers might required to be configured, so add support for configuring them. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1573812304-24074-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-23clk: qcom: alpha-pll: Remove useless read from set rateTaniya Das
PLL_MODE read in fabia set rate is not required, thus remove the same. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1573812304-24074-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18clk: qcom: gcc: limit GPLL0_AO_OUT operating frequencyJorge Ramirez-Ortiz
Limit the GPLL0_AO_OUT_MAIN operating frequency as per its hardware specifications. Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20191125135910.679310-3-niklas.cassel@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-07clk: qcom: clk-alpha-pll: Add support for Trion PLLsDeepak Katragadda
Add programming sequence support for managing the Trion PLLs. Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> [vkoul: port to upstream and tidy-up use upstream way of specifying PLLs] Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20190722074348.29582-4-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-07clk: qcom: clk-alpha-pll: Remove post_div_table checksVinod Koul
We want users to code properly and fix the post_div_table missing and not rely on core to check. So remove the post_div_table check. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lkml.kernel.org/r/20190722074348.29582-3-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-07clk: qcom: clk-alpha-pll: Remove unnecessary castVinod Koul
Commit 8f9fab480c7a ("linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL") fixed the overflow for DIV_ROUND_UP_ULL, so we no longer need the cast for DIV_ROUND_UP_ULL, so remove the unnecessary u64 casts. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20190722074348.29582-2-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: qcom: Export clk_alpha_pll_configure()Bjorn Andersson
This is used by the QCS404 GCC driver, export it to allow that driver to be compiled as a module.. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25clk: qcom: Update SPDX headers for common filesTaniya Das
SPDX headers updated for common/branch/pll/regmap files. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-02clk: qcom: Export clk_fabia_pll_configure()Stephen Boyd
This is used by the video clk driver on sdm845 and that's a module. Export it to prevent module build failures. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: qcom: Add support for controlling Fabia PLLAmit Nischal
Fabia PLL is a Digital Frequency Locked Loop (DFLL) clock generator which has a wide range of frequency output. It supports dynamic updating of the output frequency ("frequency slewing") without need to turn off the PLL before configuration. Add support for initial configuration and programming sequence to control fabia PLLs. Signed-off-by: Amit Nischal <anischal@codeaurora.org> [sboyd: Shorten code a little] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-12-13clk: qcom: add read-only alpha pll post divider operationsAbhishek Sahu
Some of the divider settings are preconfigured and should not be changed by the clock framework during frequency change. This patch adds the read-only divider operation for QCOM alpha pll post divider which is equivalent to generic divider operations in 'commit 79c6ab509558 ("clk: divider: add CLK_DIVIDER_READ_ONLY flag")'. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: support for 2 bit PLL post dividerAbhishek Sahu
Current PLL driver only supports 4 bit PLL post divider so modified the PLL divider operations to support 2 bit PLL post divider. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: support Brammo type Alpha PLLAbhishek Sahu
The Brammo type of Alpha PLL doesn't allow configuration of a VCO, but it does support dynamic update in which the frequency can be changed dynamically without turning off the PLL. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: support Huayra type Alpha PLLAbhishek Sahu
The Huayra type Alpha PLL has a 16 bit alpha value, and depending on the alpha_mode, the alpha value can be treated as M/N value or as a two’s compliment number. This PLL supports dynamic programming. Since the decoding of alpha val and dynamic programming are completely different from other Alpha PLLs we add separate functions for Huayra PLLs. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: support for dynamic updating the PLLAbhishek Sahu
Some of the Alpha PLLs support dynamic update in which the frequency can be changed dynamically without turning off the PLL. This dynamic update requires the following sequence: 1. Write the desired values to L_VAL and ALPHA_VAL registers 2. Toggle pll_latch_input from low to high 3. Wait for pll_ack_latch to transition from low to high The new L and alpha values have been latched. It may take some time for the PLL to fully settle with these new values. 4. Pull pll_latch_input low Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: support for alpha mode configurationAbhishek Sahu
The current configuration does not fully configure PLL alpha mode and values so this patch 1. Configures PLL_ALPHA_VAL_U for PLL which supports 40 bit alpha. 2. Adds alpha enable and alpha mode configuration support. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: flag for 64 bit CONFIG_CTLAbhishek Sahu
Some of the Alpha PLLs (like Spark and Brammo) don't have a CONFIG_CTL_U register. Add logic to detect when PLLs don't have this second config register and skip programming it during PLL initialization. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: fix 16 bit alpha support calculationAbhishek Sahu
The alpha value calculation has been written for 40-bit alpha values which doesn't work work properly for 16-bit ones. The alpha value is calculated on the basis of ALPHA_BITWIDTH to make the computation easy for 40 bit alpha. After calculating the 32 bit alpha, it is converted to 40 bit alpha by making lower bits zero. But if actual alpha register width is less than ALPHA_BITWIDTH, then the actual width can be used for calculation. This also means, during the 40 bit alpha pll set rate path, the lower alpha register is not configured Change the code to calculate the rate and register values from 'alpha_width' instead of hard-coding it so that it can work for the different widths that are supported. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-13clk: qcom: support for alpha pll propertiesAbhishek Sahu
Alpha PLL is a generic name used for QCOM PLLs which uses L and Alpha values for configuring the integer and fractional part. QCOM SoCs use different types of Alpha PLLs for which basic software configuration part is common with following differences. 1. All these PLLs have the same basic registers like PLL_MODE, L_VAL, ALPHA_VAL but some of the register offsets are different between PLLs types. 2. The dynamic programming sequence is different in some of the Alpha PLLs 3. Some of the PLLs don’t have 64 bit config control, 64 bit user control, VCO configuration, etc. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-02clk: qcom: Add .is_enabled ops for clk-alpha-pllRajendra Nayak
This would be useful in subsequent patches when the .set_rate operation would need to identify if the PLL is actually enabled Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [sboyd@codeaurora.org: Simplify return statement of is_enabled op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: Enable FSM mode for votable alpha PLLsRajendra Nayak
The votable alpha PLLs need to have the fsm mode enabled as part of the initialization. The sequence seems to be the same as used by clk-pll, so move the function which does this into a common place and reuse it for the clk-alpha-pll Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: handle alpha PLLs with 16bit alpha val registersRajendra Nayak
Some alpha PLLs have support for only a 16bit programable Alpha Value (as against the default 40bits). Add a flag to handle the 16bit alpha registers Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: Add support to initialize alpha pllsRajendra Nayak
Add a function to do initial configuration of the alpha plls Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qcom: Add support for alpha pll hwfsm opsRajendra Nayak
Some PLLs can support an HW FSM mode (different from the Votable FSMs, though its the same bit used to enable Votable FSMs as well as HW FSMs) which enables the HW to do the bypass/reset/enable-output-ctrl sequence on its own. So all thats needed from SW is to set the FSM_ENA bit. PLL_ACTIVE_FLAG is whats used to check if the PLL is active/enabled. Some of the PLLs which support HW FSM can also need an OFFLINE request that needs to be toggled across the enable/disable. We use a flag to identify such cases and handle them. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-30clk: qcom: Add Alpha PLL supportStephen Boyd
Add support for configuring rates of, enabling, and disabling Alpha PLLs. This is sufficient for the types of PLLs found in the global and multimedia clock controllers. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 04:50:59 +0000