summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom/clk-alpha-pll.c
AgeCommit message (Collapse)Author
2025-05-29clk: qcom: clk-alpha-pll: Do not use random stack value for recalc rateKrzysztof Kozlowski
[ Upstream commit 7a243e1b814a02ab40793026ef64223155d86395 ] If regmap_read() fails, random stack value was used in calculating new frequency in recalc_rate() callbacks. Such failure is really not expected as these are all MMIO reads, however code should be here correct and bail out. This also avoids possible warning on uninitialized value. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-1-499f37444f5d@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17clk: qcom: clk-alpha-pll: fix alpha mode configurationGabor Juhos
commit 33f1722eb86e45320a3dd7b3d42f6593a1d595c2 upstream. Commit c45ae598fc16 ("clk: qcom: support for alpha mode configuration") added support for configuring alpha mode, but it seems that the feature was never working in practice. The value of the alpha_{en,mode}_mask members of the configuration gets added to the value parameter passed to the regmap_update_bits() function, however the same values are not getting applied to the bitmask. As the result, the respective bits in the USER_CTL register are never modifed which leads to improper configuration of several PLLs. The following table shows the PLL configurations where the 'alpha_en_mask' member is set and which are passed as a parameter for the clk_alpha_pll_configure() function. In the table the 'expected rate' column shows the rate the PLL should run at with the given configuration, and the 'real rate' column shows the rate the PLL runs at actually. The real rates has been verified on hardwareOn IPQ* platforms, on other platforms, those are computed values only. file pll expected rate real rate dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz As it can be seen from the above, there are several PLLs which are configured incorrectly. Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask' values to the bitmask in order to configure the alpha mode correctly. Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed in the table above. Since the 'alpha_mode_mask' is not used by any driver currently, that part of the change causes no functional changes. Cc: stable@vger.kernel.org Fixes: c45ae598fc16 ("clk: qcom: support for alpha mode configuration") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574Devi Priya
[ Upstream commit 79dfed29aa3f714e0a94a39b2bfe9ac14ce19a6a ] Add support for NSS Huayra alpha pll found on ipq9574 SoCs. Programming sequence is the same as that of Huayra type Alpha PLL, so we can re-use the same. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Link: https://lore.kernel.org/r/20241028060506.246606-2-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-14clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not setBarnabás Czémán
Many qcom clock drivers do not have .width set. In that case value of (p)->width - 1 will be negative which breaks clock tree. Fix this by checking if width is zero, and pass 3 to GENMASK if that's the case. Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider") Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org> Tested-by: Christopher Obbard <christopher.obbard@linaro.org> Link: https://lore.kernel.org/r/20241006-fix-postdiv-mask-v3-1-160354980433@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-09-23Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core clk framework is left largely untouched this time around except for support for the newly ratified DT property 'assigned-clock-rates-u64'. I'm much more excited about the support for loading DT overlays from KUnit tests so that we can test how the clk framework parses DT nodes during clk registration. The clk framework has some places that are highly DeviceTree dependent so this charts the path to extend the KUnit tests to cover even more framework code in the future. I've got some more tests on the list that use the DT overlay support, but they uncovered issues with clk unregistration that I'm still working on fixing. Outside the core, the clk driver update pile is dominated by Qualcomm and Renesas SoCs, making it fairly usual. Looking closer, there are fixes for things all over the place, like adding missing clk frequencies or moving defines for the number of clks out of DT binding headers into the drivers. There are even conversions of DT bindings to YAML and migration away from strings to describe clk topology. Overall it doesn't look unusual so I expect the new drivers to be where we'll have fixes in the coming weeks. Core: - KUnit tests for clk registration and fixed rate basic clk type - A couple more devm helpers, one consumer and one provider - Support for assigned-clock-rates-u64 New Drivers: - Camera, display and GPU clocks on Qualcomm SM4450 - Camera clocks on Qualcomm SM8150 - Rockchip rk3576 clks - Microchip SAM9X7 clks - Renesas RZ/V2H(P) (R9A09G057) clks Updates: - Mark a bunch of struct freq_tbl const to reduce .data usage - Add Qualcomm MSM8226 A7PLL and Regera PLL support - Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse Trion, as they do differ - A number of fixes to the Qualcomm SM8550 display clock driver - Fold Qualcomm SM8650 display clock driver into SM8550 one - Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998 - Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X - Fix sdcc clk frequency tables on Qualcomm SC8180X - Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src - Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid them turning off during suspend - Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller GDSCs - Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers - Some fixes for Rockchip rk3228 and rk3588 - Exynos850: Add clock for Thermal Management Unit - Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs and add clocks for USB block in the FSYS clock controller - ExynosAutov9: Add DPUM clock controller - ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0 (and a bit more complete bindings) - Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel clocks on i.MX8Q as parents in ACM provider - Add i.MX95 NETCMIX support to the block control provider - Fix parents for ENETx_REF_SEL clocks on i.MX6UL - Add USB clocks, resets and power domains on Renesas RZ/G3S - Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on Renesas RZ/V2H - Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M - Add LCD controller clocks and resets on Renesas RZ/G2UL - Add DMA clocks and resets on Renesas RZ/G3S - Add fractional multiplication PLL support on Renesas R-Car Gen4 - Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC - Support for the Microchip SAM9X7 SoC as follows: - Updates for the Microchip PLL drivers - DT binding documentation updates (for the new clock driver and for the slow clock controller that SAM9X7 is using) - A fix for the Microchip SAMA7G5 clock driver to avoid allocating more memory than necessary - Constify some Amlogic structs - Add SM1 eARC clocks for Amlogic - Introduce a symbol namespace for Amlogic clock specific symbols - Add reset controller support to audiomix block control on i.MX - Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D lcdif_pixel_src clock - Fix parent clocks for earc_phy and audpll on i.MX8MP - Fix default parents for enet[12]_ref_sel on i.MX6UL - Add ops in composite 8M and 93 that allow no-op on disable - Add check for PCC present bit on composite 7ULP register - Fix fractional part for fracn-gppll on prepare in i.MX - Fix clock tree update for TF-A managed clocks on i.MX8M - Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D - Add the SAI7 IPG clock for i.MX8MN - Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM - Add LVDS bypass clocks on i.MX8QXP - Add muxes for MIPI and PHY ref clocks on i.MX - Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP - Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX - Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP - Add some module descriptions to the i.MX generic and the i.MXRT1050 driver - Fix return value for bypass for composite i.MX7ULP - Move Mediatek clk bindings to clock/ - Convert some more clk bindings to dt schema" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits) clk: Switch back to struct platform_driver::remove() dt-bindings: clock, reset: fix top-comment indentation rk3576 headers clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions clk: provide devm_clk_get_optional_enabled_with_rate() clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data() clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT clk: renesas: rzv2h: Add support for dynamic switching divider clocks clk: renesas: r9a08g045: Add clocks, resets and power domains for USB clk: rockchip: fix error for unknown clocks clk: rockchip: rk3588: drop unused code clk: rockchip: Add clock controller for the RK3576 clk: rockchip: Add new pll type pll_rk3588_ddr dt-bindings: clock, reset: Add support for rk3576 dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p clk: imx95: enable the clock of NETCMIX block control dt-bindings: clock: add RMII clock selection dt-bindings: clock: add i.MX95 NETCMIX block control clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data ...
2024-09-09clk: qcom: clk-alpha-pll: Simplify the zonda_pll_adjust_l_val()Satya Priya Kakitapalli
In zonda_pll_adjust_l_val() replace the divide operator with comparison operator to fix below build error and smatch warning. drivers/clk/qcom/clk-alpha-pll.o: In function `clk_zonda_pll_set_rate': clk-alpha-pll.c:(.text+0x45dc): undefined reference to `__aeabi_uldivmod' smatch warnings: drivers/clk/qcom/clk-alpha-pll.c:2129 zonda_pll_adjust_l_val() warn: replace divide condition '(remainder * 2) / prate' with '(remainder * 2) >= prate' Fixes: f4973130d255 ("clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL") Reported-by: Jon Hunter <jonathanh@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202408110724.8pqbpDiD-lkp@intel.com/ Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Link: https://lore.kernel.org/r/20240906113905.641336-1-quic_skakitap@quicinc.com Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-08-15clk: qcom: dispcc-sm8250: use special function for Lucid 5LPE PLLDmitry Baryshkov
According to msm-5.10 the lucid 5lpe PLLs have require slightly different configuration that trion / lucid PLLs, it doesn't set PLL_UPDATE_BYPASS bit. Add corresponding function and use it for the display clock controller on Qualcomm SM8350 platform. Fixes: 205737fe3345 ("clk: qcom: add support for SM8350 DISPCC") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-2-1149dd8399fe@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-14clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLLAjit Pandey
In LUCID EVO PLL CAL_L_VAL and L_VAL bitfields are part of single PLL_L_VAL register. Update for L_VAL bitfield values in PLL_L_VAL register using regmap_write() API in __alpha_pll_trion_set_rate callback will override LUCID EVO PLL initial configuration related to PLL_CAL_L_VAL bit fields in PLL_L_VAL register. Observed random PLL lock failures during PLL enable due to such override in PLL calibration value. Use regmap_update_bits() with L_VAL bitfield mask instead of regmap_write() API to update only PLL_L_VAL bitfields in __alpha_pll_trion_set_rate callback. Fixes: 260e36606a03 ("clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces") Cc: stable@vger.kernel.org Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20240611133752.2192401-2-quic_ajipan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-31clk: qcom: clk-alpha-pll: Add support for Regera PLL opsTaniya Das
Regera PLL ops are required to control the Regera PLL from clock controller drivers, hence add the Regera PLL ops and configure function. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731062916.2680823-6-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-31clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLLSatya Priya Kakitapalli
The Zonda PLL has a 16 bit signed alpha and in the cases where the alpha value is greater than 0.5, the L value needs to be adjusted accordingly. Thus update the logic to handle the signed alpha val. Fixes: f21b6bfecc27 ("clk: qcom: clk-alpha-pll: add support for zonda pll") Cc: stable@vger.kernel.org Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731062916.2680823-5-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-31clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabledSatya Priya Kakitapalli
Currently, clk_zonda_pll_set_rate polls for the PLL to lock even if the PLL is disabled. However, if the PLL is disabled then LOCK_DET will never assert and we'll return an error. There is no reason to poll LOCK_DET if the PLL is already disabled, so skip polling in this case. Fixes: f21b6bfecc27 ("clk: qcom: clk-alpha-pll: add support for zonda pll") Cc: stable@vger.kernel.org Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731062916.2680823-4-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-31clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate APISatya Priya Kakitapalli
Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate API. The shift value is not same for different types of plls and should be taken from the pll's .post_div_shift member. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Cc: stable@vger.kernel.org Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-31clk: qcom: clk-alpha-pll: Fix the pll post div maskSatya Priya Kakitapalli
The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it. Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-19Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This a large collection of clk driver updates and a handful of new SoC clk driver support. We have the usual Qualcomm clk drivers, along with clk drivers for the Sophgo and T-Head vendors, all to support some new SoCs. Nothing in particular stands out to me in the updates. There's the interconnect clk driver which exposes clks as interconnects, crossing subsystems. There's a bunch of janitorial things that are improving drivers in general like kmemdup_array() or fixing error paths. But overall the updates look normal to fix the description data which is usually the stuff that's wrong and/or untested. Core: - Skip gate basic type KUnit tests on s390 due to lack of MMIO emulation New Drivers: - AP sub-system clock controller in the T-Head TH1520 - Sophgo Sophon sg2042 clk driver - Qualcomm SM7150 camera, display and video clk drivers - Qualcomm QCM2290 GPU clk driver - Qualcomm QCS8386/QCS8084 NSS clk driver - Qualcomm SM8650 camera and video drivers Updates: - Add reset support to Airoha EN7581 clk driver - Add MODULE_DESCRIPTIONs to various clk drivers - Introduce helper logic to expose clock controllers as simple interconnect providers - Use the interconnect helper above on Qualcomm ipq9574 - Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on Qualcomm X1Elite - Improve error handling in Qualcomm kpss-xcc driver - Mark Qualcomm SC8280XP LPASS clock controller regmap_config const - Export more clocks for Rockchip rk3128 peripherals - Convert Rockchip clk drivers to use kmemdup_array() - Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers - Make qcom_cc_really_probe() take a struct device to allow reuse in non-platform-drivers - Introduce prepare-only branch clock ops in the qcom clk driver to support clocks on buses that take locks - Describe parent/child relationship for Qualcomm SC7280 camera GDSCs - Support Qualcomm Huayra 2290 alpha PLL - Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to match HS200 support - Add missing PCIe PIPE clocks on Qualcomm IPQ9574 - Fix various configurations and properties in the Qualcomm SA8775P, X1E80100 and SM7280 drivers - Park Qualcomm SM8350 GPU RCGs on XO while disabled - Remove unused CONFIG_QCOM_RPMCC Kconfig symbol - exynos-clkout: Remove usage of of_device_id table as .of_match_table, because the driver is instantiated as MFD cell, not as standalone platform driver. Populated .of_match_table confused people few times to convert the code to device_get_match_data(), which broke the driver - Mark one Samsung UFS clock as critical, because having it off stops the system from shutdown - Use kmemdup_array() when applicable - Remove unused 'struct gates_data' from old sunxi driver library - Add GPADC clock and reset for Allwinner H616 - Minor Amlogic S4 clock fixes - DT bindings Yaml conversion of the Amlogic AXG audio controller - Amlogic C3 clock controllers support - Amlogic clk flag added to skip init of already enabled PLLs and avoid relocking - Amlogic A1 DT bindings updates for system pll support - Add missing MODULE_DESCRIPTION where necessary - Remove obsolete clock DT binding header files - Add Battery Backup (VBATTB) and I2C clocks, resets, and power domains on Renesas RZ/G3S - Add audio clocks on Renesas R-Car V4M - Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits) clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate() clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id() clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate() clk: sunxi-ng r40: Constify struct regmap_config clk: en7523: fix rate divider for slic and spi clocks clk: lpc32xx: Constify struct regmap_config clk: xilinx: Constify struct regmap_config clk: en7523: Remove PCIe reset open drain configuration for EN7581 clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC clk: en7523: Add reset-controller support for EN7581 SoC dt-bindings: clock: airoha: Add reset support to EN7581 clock binding dt-bindings: clock: mediatek: Document reset cells for MT8188 sys clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys dt-bindings: clock: sprd,sc9860-clk: convert to YAML dt-bindings: clock: qoriq-clock: convert to yaml format clk: qcom: Park shared RCGs upon registration clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks ...
2024-06-12clk: qcom: clk-alpha-pll: Add HUAYRA_2290 supportKonrad Dybcio
Commit 134b55b7e19f ("clk: qcom: support Huayra type Alpha PLL") introduced an entry to the alpha offsets array, but diving into QCM2290 downstream and some documentation, it turned out that the name Huayra apparently has been used quite liberally across many chips, even with noticeably different hardware. Introduce another set of offsets and a new configure function for the Huayra PLL found on QCM2290. This is required e.g. for the consumers of GPUCC_PLL0 to properly start. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-2-4bc0c19da4af@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-28clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLsGabor Juhos
The clk_alpha_pll_stromer_plus_set_rate() function does not sets the ALPHA_EN bit in the USER_CTL register, so setting rates which requires using alpha mode works only if the bit gets set already prior calling the function. Extend the function to set the ALPHA_EN bit in order to allow using fractional rates regardless whether the bit gets set previously or not. Fixes: 84da48921a97 ("clk: qcom: clk-alpha-pll: introduce stromer plus ops") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240508-stromer-plus-alpha-en-v1-1-6639ce01ca5b@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLsGabor Juhos
The clk_alpha_pll_stromer_set_rate() function writes inproper values into the ALPHA_VAL{,_U} registers which results in wrong clock rates when the alpha value is used. The broken behaviour can be seen on IPQ5018 for example, when dynamic scaling sets the CPU frequency to 800000 KHz. In this case the CPU cores are running only at 792031 KHz: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 792031 This happens because the function ignores the fact that the alpha value calculated by the alpha_pll_round_rate() function is only 32 bits wide which must be extended to 40 bits if it is used on a hardware which supports 40 bits wide values. Extend the clk_alpha_pll_stromer_set_rate() function to convert the alpha value to 40 bits before wrinting that into the registers in order to ensure that the hardware really uses the requested rate. After the change the CPU frequency is correct: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 800000 Cc: stable@vger.kernel.org Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs'Gabor Juhos
Move the locally defined Huayra register map to 'clk_alpha_pll_regs' in order to allow using that by other drivers, like the clk-cbf-8996. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-2-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-21clk: qcom: clk-alpha-pll: reorder Stromer register offsetsGabor Juhos
The register offset arrays are ordered based on the register offsets for all PLLs but the Stromer. For consistency, reorder the Stromer specific array as well. No functional changes. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-2-f7c0c5607cca@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-21clk: qcom: clk-alpha-pll: remove invalid Stromer register offsetGabor Juhos
The offset of the CONFIG_CTL_U register defined for the Stromer PLL is wrong. It is not aligned on a 4 bytes boundary which might causes errors in regmap operations. Maybe the intention behind of using the 0xff value was to indicate that the register is not implemented in the PLL, but this is not verified anywhere in the code. Moreover, this value is not used even in other register offset arrays despite that those PLLs also have unimplemented registers. Additionally, on the Stromer PLLs the current code only touches the CONFIG_CTL_U register if the result of pll_has_64bit_config() is true which condition is not affected by the change. Due to the reasons above, simply remove the CONFIG_CTL_U entry from the Stromer specific array. Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-1-f7c0c5607cca@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-20clk: qcom: clk-alpha-pll: Skip reconfiguring the running Lucid EvoAbel Vesa
The PLL0 is configured by the bootloader and is the parent of the mdp_clk_src. The Trion implementation of the configure function is already skipping this step if the PLL is enabled, so lets extend the same behavior to Lucid Evo variant. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20240418-clk-qcom-lucid-evo-skip-configuring-enabled-v1-1-caede5f1c7a3@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-06clk: qcom: clk-alpha-pll: Add support for zonda ole pll configureRajendra Nayak
Zonda ole pll has as extra PLL_OFF_CONFIG_CTL_U2 register, hence add support for it. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-6-7fb08c861c7c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-10-21clk: qcom: clk-alpha-pll: introduce stromer plus opsVaradarajan Narayanan
Stromer plus APSS PLL does not support dynamic frequency scaling. To switch between frequencies, we have to shut down the PLL, configure the L and ALPHA values and turn on again. So introduce the separate set of ops for Stromer Plus PLL. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/2affa6c63ff0c4342230623a7d4eef02ec7c02d4.1697781921.git.quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19clk: qcom: clk-alpha-pll: Add support for lucid ole pll configureJagadeesh Kona
Lucid ole pll has as extra RINGOSC_CAL_L field in L register in addition to the fields that are part of lucid evo pll, hence add support for lucid ole pll configure function to configure the ole plls. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230707035744.22245-3-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-06-13clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)Konrad Dybcio
The "vanilla" Alpha PLL configs are sometimes provided with an intention to only update certain bits of th register. Do so if a mask is found. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Iskren Chernev <me@iskren.info> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601-topic-alpha_ctl-v1-1-b6a932dfcf68@linaro.org
2023-05-24clk: qcom: clk-alpha-pll: Add support to configure PLL_TEST_CTL_U2Jagadeesh Kona
The lucid ole pll reuses lucid evo ops but it has an additional test control register which is required to be programmed, add support to program the same. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230524145203.13153-2-quic_jkona@quicinc.com
2023-03-15clk: qcom: Add STROMER PLUS PLL type for IPQ5332Kathiravan T
Add the support for stromer plus pll, which is found on the IPQ5332 SoCs. Programming sequence is same as the stromer pll, so we can re-use the same. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230307062232.4889-3-quic_kathirav@quicinc.com
2023-03-15clk: qcom: clk-alpha-pll: Add support for Stromer PLLsVaradarajan Narayanan
Add programming sequence support for managing the Stromer PLLs. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230307062232.4889-2-quic_kathirav@quicinc.com
2023-01-18clk: qcom: clk-alpha-pll: program PLL_TEST/PLL_TEST_U if requiredDmitry Baryshkov
Program PLL_TEST and PLL_TEST_U registers if required by the pll configuration. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230113120544.59320-3-dmitry.baryshkov@linaro.org
2022-12-01clk: qcom: Add LUCID_OLE PLL type for SM8550Abel Vesa
Add a LUCID_OLE PLL type for SM8550 SoC from Qualcomm. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130112852.2977816-5-abel.vesa@linaro.org
2022-09-27clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bitKonrad Dybcio
This is used on at least SM6375 and its variations. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921001303.56151-1-konrad.dybcio@somainline.org
2022-09-26clk: qcom: Merge alt alpha plls for qcm2260, sm6115Iskren Chernev
The qcom2260 and sm6115 GCC drivers use a common modified DEFAULT and BRAMMO alpha pll offsets. Move these common offsets to the shared place to avoid duplication. The new layouts have a suffix EVO similar to LUCID and RIVIAN. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220830075620.974009-4-iskren.chernev@gmail.com
2022-09-26clk: qcom: alpha-pll: add support for power off mode for lucid evo PLLDmitry Baryshkov
PLLs can be kept in standby (default configuration) or in off mode when disabled during power collapse. Hence add support for pll disable off mode for lucid evo PLL. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908222850.3552050-3-dmitry.baryshkov@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfacesVladimir Zapolskiy
Add and export Rivian EVO PLL configuration and control functions to clock controller drivers, the PLL is used by SM8450 camera clock controller. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062739.2757912-1-vladimir.zapolskiy@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfacesVladimir Zapolskiy
Add controls for Lucid EVO PLL configuration and export control functions to clock controller drivers, the PLL is used by Qualcomm SM8450 camera and display clock controllers. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062729.2757893-1-vladimir.zapolskiy@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed codeVladimir Zapolskiy
Unify all exported PLL clock configuration functions and data structures as GPL symbols. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062720.2757874-1-vladimir.zapolskiy@linaro.org
2022-07-06clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure descriptionVladimir Zapolskiy
After merging lucid and trion pll functions in commit 0b01489475c6 ("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid") the function clk_trion_pll_configure() is left with an old description header, which results in a W=2 compile time warning, fix it. Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro.org
2022-01-12Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...
2022-01-05Merge tag 'qcom-clk-for-5.17' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom Pull qcom clk driver updates from Bjorn Andersson: This introduces bindings and drivers for the global clock controllers found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for SDX65 and SM8450. It cleans up the SMD RPM clock driver and it adds includes for clk-provider.h throughout the clock providers that was lacking this. * tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits) clk: qcom: turingcc-qcs404: explicitly include clk-provider.h clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h clk: qcom: mmcc-apq8084: explicitly include clk-provider.h clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h clk: qcom: gcc-sm6350: explicitly include clk-provider.h clk: qcom: gcc-msm8994: explicitly include clk-provider.h clk: qcom: gcc-sm8350: explicitly include clk-provider.h clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller clk: qcom: Add clock driver for SM8450 clk: qcom: Add SDX65 GCC support clk: qcom: Add LUCID_EVO PLL type for SDX65 dt-bindings: clock: Add SM8450 GCC clock bindings dt-bindings: clock: Add SDX65 GCC clock bindings clk: qcom: rpmh: add support for SM8450 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8450 clk: qcom: smd-rpm: Drop binary value handling for buffered clock clk: qcom: smd-rpm: Drop the use of struct rpm_cc clk: qcom: smd-rpm: Drop MFD qcom-rpm reference ...
2022-01-05clk: qcom: clk-alpha-pll: Increase PLL lock detect poll timeTaniya Das
PLL poll for lock detection can take more than 100us for certain type of Lucid PLLs and also the new PLLs types(Lucid EVO), thus update to 200us. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1640018638-19436-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-16clk: qcom: Add LUCID_EVO PLL type for SDX65Vamsi Krishna Lanka
Add a LUCID_EVO PLL type for SDX65 SoC from Qualcomm. Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> [bjorn: Fixed indentation issues reported by checkpatch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/d582c3e291ae82aa488785eff36157653741f841.1638861860.git.quic_vamslank@quicinc.com
2021-12-02clk: qcom: clk-alpha-pll: Don't reconfigure running TrionBjorn Andersson
In the event that the bootloader has configured the Trion PLL as source for the display clocks, e.g. for the continuous splashscreen, then there will also be RCGs that are clocked by this instance. Reconfiguring, and in particular disabling the output of, the PLL will cause issues for these downstream RCGs and has been shown to prevent them from being re-parented. Follow downstream and skip configuration if it's determined that the PLL is already running. Fixes: 59128c20a6a9 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211123162508.153711-1-bjorn.andersson@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepareJonathan Marek
Caught this when looking at alpha-pll code. Untested but it is clear that this was intended to write to PLL_CAL_L_VAL and not PLL_ALPHA_VAL. Fixes: 691865bad627 ("clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20210609022852.4151-1-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: qcom: clk-alpha-pll: add support for zonda pllJonathan Marek
Ported over from the downstream driver. Will be used by SM8250 CAMCC. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20210609022051.2171-2-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLLVivek Aknurwar
Lucid 5LPE is a slightly different Lucid PLL with different offsets and porgramming sequence so add support for these Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org> Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org> [vkoul: rebase and tidy up for upstream] Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210127070811.152690-4-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08clk: qcom: clk-alpha-pll: modularize alpha_pll_trion_set_rate()Vinod Koul
Trion 5LPE set rate uses code similar to alpha_pll_trion_set_rate() but with different registers. Modularize these by moving out latch and latch ack bits so that we can reuse the function. Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210127070811.152690-3-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08clk: qcom: clk-alpha-pll: replace regval with valVinod Koul
Driver uses regval variable for holding register values, replace with a shorter one val Suggested-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210127070811.152690-2-vkoul@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-11-04clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLsTaniya Das
Add programming sequence support for managing the Agera PLLs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1602873815-1677-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-11-04clk: qcom: clk-alpha-pll: Add support for helper functionsTaniya Das
Introduce clk_alpha_pll_write_config and alpha_pll_check_rate_margin helper functions to be across PLL configure functions and PLL set rate functions. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1602873815-1677-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk/qcom: fix spelling typoWang Qing
Modify the comment typo: "compliment" -> "complement". Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1600930506-394-1-git-send-email-wangqing@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 23:27:18 +0000