summaryrefslogtreecommitdiff
path: root/drivers/clk/imx
AgeCommit message (Collapse)Author
2020-02-24clk: imx: imx8mp: fix a53 cpu clockPeng Fan
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clk Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx: imx8mn: fix a53 cpu clockPeng Fan
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clk. Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx: imx8mm: fix a53 cpu clockPeng Fan
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clock Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx: imx8mq: fix a53 cpu clockPeng Fan
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which violates the CCM. There is a CORE_SEL slice before A53 core, we need to configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clock Fixes: db27e40b27f1 ("clk: imx8mq: Add the missing ARM clock") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx8mp: Rename the IMX8MP_CLK_HDMI_27M clockAnson Huang
On i.MX8MP, internal HDMI 27M clock is actually 24MHz, so rename the IMX8MP_CLK_HDMI_27M to IMX8MP_CLK_HDMI_24M. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-19clk: imx8mn: Remove unused includesAnson Huang
There is nothing in use from init.h/of.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-19clk: imx8mm: Remove unused includesAnson Huang
There is nothing in use from init.h/of.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-19clk: imx8mp: Include slab.h instead of clkdev.hAnson Huang
slab.h is necessary and included indirectly by clkdev.h, actually, there is nothing in use from clkdev.h, so just include slab.h instead of clkdev.h. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mp: Add missing of_node_put()Anson Huang
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mn: Add missing of_node_put()Anson Huang
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mm: Add missing of_node_put()Anson Huang
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mq: Add missing of_node_put()Anson Huang
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx6sl: Add missing of_node_put()Anson Huang
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx7ulp: Include clk-provider.h instead of clk.hAnson Huang
The i.MX7ULP clock driver is provider, NOT consumer, so clk-provider.h should be used instead of clk.h. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx: drop redundant initializationAnson Huang
No need to initialize flags as 0, remove the initialization. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx: Include clk-provider.h instead of clk.h for i.MX8M SoCs clock driverAnson Huang
The i.MX8M SoCs clock driver are provider, NOT consumer, so clk-provider.h should be used instead of clk.h. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mm: Add CLKO2 supportFabio Estevam
Add CLKO2 support, which is useful for debugging purposes. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mm: Fix the CLKO1 source select listFabio Estevam
The CLKO1 clock source select list is the following as per the i.MX8MM Reference Manual (put in increasing order): 000 - 24M_REF_CLK 001 - SYSTEM_PLL1_CLK 010 - None 011 - SYSTEM_PLL1_DIV4 100 - AUDIO_PLL2_CLK 101 - SYSTEM_PLL2_DIV2 110 - VPU_PLL_CLK 111 - SYSTEM_PLL1_DIV10 Fix it accordingly. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: imx8mn: use imx8m_clk_hw_composite_corePeng Fan
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: imx8mm: use imx8m_clk_hw_composite_corePeng Fan
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: imx8mq: use imx8m_clk_hw_composite_corePeng Fan
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: composite-8m: add imx8m_clk_hw_composite_corePeng Fan
There are several clock slices, current composite code only support bus/ip clock slices, it could not support core slice. So introduce a new API imx8m_clk_hw_composite_core to support core slice. To core slice, post divider with 3 bits width and no pre divider. Other fields are same as bus/ip slices. Add a flag IMX_COMPOSITE_CORE for the usecase. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: imx8mp: add ocotp root clkPeng Fan
Add ocotp root clk, then when using nvmem to read fuse, clk could be managed. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-13clk: imx: pll14xx: Add new frequency entries for pll1443x tableAnson Huang
Add new frequency entries to pll1443x table to meet different display settings requirement. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-13clk: imx8mn: add SNVS clock to clock treeHoria Geantă
i.mx8mn has support for clock gating the snvs module. Add it into clock tree so that rtc-snvs driver could use it. Note this will also be required in the snvs_pwrkey driver, once support for clock management will be added. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-31Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', ↵Stephen Boyd
'clk-freescale' and 'clk-qoriq' into clk-next - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
2020-01-12clk: imx: Add support for i.MX8MP clock driverAnson Huang
Add clock driver support for i.MX8MP which is a new SoC of i.MX8M family. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-12clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based APIAnson Huang
Switch the imx_clk_gate4_flags() function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: imx8mq: Switch to clk_hw based APIPeng Fan
Switch the entire clk-imx8mq driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: imx8mm: Switch to clk_hw based APIPeng Fan
Switch the entire clk-imx8mm driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: imx8mn: Switch to clk_hw based APIPeng Fan
Switch the entire clk-imx8mn driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: Remove __init for imx_obtain_fixed_clk_hw() APIPeng Fan
Some of i.MX SoCs' clock driver will use platform driver model, and they need to call imx_obtain_fixed_clk_hw() API, so imx_obtain_fixed_clk_hw() API should NOT be in .init section. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: gate3: Switch to clk_hw based APIPeng Fan
Switch the imx_clk_hw_gate3_flags function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: add hw API imx_clk_hw_mux2_flagsPeng Fan
Introduce hw based API imx_clk_hw_mux2_flags, then we could convert i.MX8MN clk driver to use hw based APIs. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: add imx_unregister_hw_clocksPeng Fan
There is a non hw API based imx_unregister_clocks to unregister clocks when of_clk_add_provider failed. Add a hw API based imx_unregister_hw_clocks when of_clk_add_hw_provider failed. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: clk-composite-8m: Switch to clk_hw based APIPeng Fan
Switch the imx8m_clk_hw_composite_flags function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: clk-pll14xx: Switch to clk_hw based APIPeng Fan
Switch the imx_clk_pll14xx function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx7up: Rename the clks to hwsAbel Vesa
This is just to keep in line with the other i.MX clock drivers that are clk_hw based. Plus, it makes more sense to be called hws since its type is clk_hw not clk. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw basedAbel Vesa
Renaming the imx_clk_divider_gate register function to imx_clk_hw_divider_gate to be more obvious it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw basedAbel Vesa
Renaming the imx_clk_pfdv2 register function to imx_clk_hw_pfdv2 to be more obvious it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw basedAbel Vesa
Renaming the imx_clk_pllv4 register function to imx_clk_hw_pllv4 to be more obvious it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename sccg and frac pll register to suggest clk_hwAbel Vesa
Renaming the imx_clk_frac_pll and imx_clk_sccg_pll register functions to imx_clk_hw_frac_pll, respectively imx_clk_hw_sccg_pll to be more obvious that they are clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: imx7ulp composite: Rename to show is clk_hw basedAbel Vesa
Renaming the imx7ulp_clk_composite register function to imx7ulp_clk_hw_composite to show it is clk_hw based. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: pllv2: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_pllv2 register function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: pllv1: Switch to clk_hw based APIAbel Vesa
Switch the imx_clk_pllv1 register function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Replace all the clk based helpers with macrosAbel Vesa
Replacing with macros all the clk based API helpers we reduce the code duplication. The end goal is to get rid of all these macros when there will be no more users of the clk based API, that is, when all the i.MX clock provider drivers will be switched completely to the clk_hw based API. This is another step in moving away from the non clk_hw based API usage throughout the i.MX clock drivers. The reason for doing that is to have a clear split between the clock provider and the clock consumer API. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the SCCG to SSCGAbel Vesa
According to the manual the acronym stands for Spread Sprectum Clock Generator. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Add correct failure handling for clk based helpersAbel Vesa
If the clk_hw based API returns an error, trying to return the clk from hw will end up in a NULL pointer dereference. So adding the to_clk checker and using it inside every clk based macro helper we handle that case correctly. This to_clk is also temporary and will go away along with the clk based macro helpers once there is no user that need them anymore. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx8qxp-lpcg: Warn against devm_platform_ioremap_resourceLeonard Crestez
On imx8 the LPCG nodes map entire subsystems and overlap peripherals, this means that using devm_platform_ioremap_resource will cause many devices to fail to probe including serial ports. Well-meaning but boot-breaking patches were posted multiple times so add a comment explaining this issue. Suggested-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: pll14xx: fix clk_pll14xx_wait_lockPeng Fan
The usage of readl_poll_timeout is wrong, the 3rd parameter(cond) should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US", It is not check whether the pll locked, LOCK_STATUS reflects the mask, not LOCK_TIMEOUT_US. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Cc: <stable@vger.kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 19:30:32 +0000