| Age | Commit message (Collapse) | Author |
|---|
|
* pm-core:
PM-runtime: Switch autosuspend over to using hrtimers
* pm-qos:
PM / QoS: Change to use DEFINE_SHOW_ATTRIBUTE macro
* pm-domains:
PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
* pm-sleep:
PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
|
|
Only the mount namespace code that implements mount(2) should be using the
MS_* flags. Suppress them inside the kernel unless uapi/linux/mount.h is
included.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
|
|
The remove_memory_block() function was renamed to in commit
cc292b0b4302 ("drivers/base/memory.c: rename remove_memory_block() to
remove_memory_section()").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
|
|
Some interrupt controllers whose interrupts are acked on read will set
the status bits for masked interrupts without changing the state of
the IRQ line.
Some chips have an additional "feature" where if those set bits are
not cleared before unmasking their respective interrupts, the IRQ
line will change the state and we'll interpret this as an interrupt
although it actually fired when it was masked.
Add a new field to the irq chip struct that tells the regmap irq chip
code to always clear the status registers before actually changing the
irq mask values.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add level active IRQ support to regmap-irq irqchip. Change breaks
existing regmap-irq type setting. Convert the existing drivers which
use regmap-irq with trigger type setting (gpio-max77620) to work
with this new approach. So we do not magically support level-active
IRQs on gpio-max77620 - but add support to the regmap-irq for chips
which support them =)
We do not support distinguishing situation where HW supports rising
and falling edge detection but not both. Separating this would require
inventing yet another flags for IRQ types.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The common code should not set IRQ type. Read HW defaults to the
cache at startup instead of forcing type to EDGE_BOTH. If
default setting is needed this should be done via normal
mechanisms or by chip specific code if normal mechanisms are not
suitable for some reason. Common regmap-irq code should not have
defaults hard-coded but keep the HW/boot defaults untouched.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is the much more correct fix for my earlier attempt at:
https://lkml.org/lkml/2018/12/10/118
Short recap:
- There's not actually a locking issue, it's just lockdep being a bit
too eager to complain about a possible deadlock.
- Contrary to what I claimed the real problem is recursion on
kn->count. Greg pointed me at sysfs_break_active_protection(), used
by the scsi subsystem to allow a sysfs file to unbind itself. That
would be a real deadlock, which isn't what's happening here. Also,
breaking the active protection means we'd need to manually handle
all the lifetime fun.
- With Rafael we discussed the task_work approach, which kinda works,
but has two downsides: It's a functional change for a lockdep
annotation issue, and it won't work for the bind file (which needs
to get the errno from the driver load function back to userspace).
- Greg also asked why this never showed up: To hit this you need to
unregister a 2nd driver from the unload code of your first driver. I
guess only gpus do that. The bug has always been there, but only
with a recent patch series did we add more locks so that lockdep
built a chain from unbinding the snd-hda driver to the
acpi_video_unregister call.
Full lockdep splat:
[12301.898799] ============================================
[12301.898805] WARNING: possible recursive locking detected
[12301.898811] 4.20.0-rc7+ #84 Not tainted
[12301.898815] --------------------------------------------
[12301.898821] bash/5297 is trying to acquire lock:
[12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80
[12301.898841] but task is already holding lock:
[12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898856] other info that might help us debug this:
[12301.898862] Possible unsafe locking scenario:
[12301.898867] CPU0
[12301.898870] ----
[12301.898874] lock(kn->count#39);
[12301.898879] lock(kn->count#39);
[12301.898883] *** DEADLOCK ***
[12301.898891] May be due to missing lock nesting notation
[12301.898899] 5 locks held by bash/5297:
[12301.898903] #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0
[12301.898915] #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190
[12301.898925] #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898936] #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240
[12301.898950] #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40
[12301.898960] stack backtrace:
[12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84
[12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011
[12301.898982] Call Trace:
[12301.898989] dump_stack+0x67/0x9b
[12301.898997] __lock_acquire+0x6ad/0x1410
[12301.899003] ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899010] ? find_held_lock+0x2d/0x90
[12301.899017] ? mutex_spin_on_owner+0xe4/0x150
[12301.899023] ? find_held_lock+0x2d/0x90
[12301.899030] ? lock_acquire+0x90/0x180
[12301.899036] lock_acquire+0x90/0x180
[12301.899042] ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899049] __kernfs_remove+0x296/0x310
[12301.899055] ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899060] ? kernfs_name_hash+0xd/0x80
[12301.899066] ? kernfs_find_ns+0x6c/0x100
[12301.899073] kernfs_remove_by_name_ns+0x3b/0x80
[12301.899080] bus_remove_driver+0x92/0xa0
[12301.899085] acpi_video_unregister+0x24/0x40
[12301.899127] i915_driver_unload+0x42/0x130 [i915]
[12301.899160] i915_pci_remove+0x19/0x30 [i915]
[12301.899169] pci_device_remove+0x36/0xb0
[12301.899176] device_release_driver_internal+0x185/0x240
[12301.899183] unbind_store+0xaf/0x180
[12301.899189] kernfs_fop_write+0x104/0x190
[12301.899195] __vfs_write+0x31/0x180
[12301.899203] ? rcu_read_lock_sched_held+0x6f/0x80
[12301.899209] ? rcu_sync_lockdep_assert+0x29/0x50
[12301.899216] ? __sb_start_write+0x13c/0x1a0
[12301.899221] ? vfs_write+0x17f/0x1b0
[12301.899227] vfs_write+0xb9/0x1b0
[12301.899233] ksys_write+0x50/0xc0
[12301.899239] do_syscall_64+0x4b/0x180
[12301.899247] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[12301.899253] RIP: 0033:0x7f452ac7f7a4
[12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83
[12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4
[12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001
[12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730
[12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d
[12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d
Looking around I've noticed that usb and i2c already handle similar
recursion problems, where a sysfs file can unbind the same type of
sysfs somewhere else in the hierarchy. Relevant commits are:
commit 356c05d58af05d582e634b54b40050c73609617b
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Mon May 14 13:30:03 2012 -0400
sysfs: get rid of some lockdep false positives
commit e9b526fe704812364bca07edd15eadeba163ebfb
Author: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Date: Fri May 17 14:56:35 2013 +0200
i2c: suppress lockdep warning on delete_device
Implement the same trick for driver bind/unbind.
v2: Put the macro into bus.c (Greg).
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
define_genpd_debugfs_fops()
We already have the DEFINE_SHOW_ATTRIBUTE, There is no need to define
such a macro, so remove define_genpd_open_function and
define_genpd_debugfs_fops.
Convert them to DEFINE_SHOW_ATTRIBUTE.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PM-runtime uses the timer infrastructure for autosuspend. This implies
that the minimum time before autosuspending a device is in the range
of 1 tick included to 2 ticks excluded
-On arm64 this means between 4ms and 8ms with default jiffies
configuration
-And on arm, it is between 10ms and 20ms
These values are quite high for embedded systems which sometimes want
the duration to be in the range of 1 ms.
It is possible to switch autosuspend over to using hrtimers to get
finer granularity for short durations and take advantage of slack to
retain some margins and get long timeouts with minimum wakeups.
On an arm64 platform that uses 1ms for autosuspending timeout of its
GPU, idle power is reduced by 10% with hrtimer.
The latency impact on arm64 hikey octo cores is:
- mark_last_busy: from 1.11 us to 1.25 us
- rpm_suspend: from 15.54 us to 15.38 us
[Only the code path of rpm_suspend() that starts hrtimer has been
measured.]
arm64 image (arm64 default defconfig) decreases by around 3KB
with following details:
$ size vmlinux-timer
text data bss dec hex filename
12034646 6869268 386840 19290754 1265a82 vmlinux
$ size vmlinux-hrtimer
text data bss dec hex filename
12030550 6870164 387032 19287746 1264ec2 vmlinux
The latency impact on arm 32bits snowball dual cores is :
- mark_last_busy: from 0.31 us usec to 0.77 us
- rpm_suspend: from 6.83 us to 6.67 usec
The increase of the image for snowball platform that I used for
testing performance impact, is neglictable (244B).
$ size vmlinux-timer
text data bss dec hex filename
7157961 2119580 264120 9541661 91981d build-ux500/vmlinux
size vmlinux-hrtimer
text data bss dec hex filename
7157773 2119884 264248 9541905 919911 vmlinux-hrtimer
And arm 32bits image (multi_v7_defconfig) increases by around 1.7KB
with following details:
$ size vmlinux-timer
text data bss dec hex filename
13304443 6803420 402768 20510631 138f7a7 vmlinux
$ size vmlinux-hrtimer
text data bss dec hex filename
13304299 6805276 402768 20512343 138fe57 vmlinux
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
__device_release_driver() has to check dev->bus->need_parent_lock
before dropping the parent lock and acquiring it again as it may
attempt to drop a lock that hasn't been acquired or lock a device
that shouldn't be locked and create a lock imbalance.
Fixes: 8c97a46af04b (driver core: hold dev's parent lock when needed)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sync documentation with code.
Fixes: 07bb80d40b0e (device property: Add support for remote endpoints)
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)
- Updates for new (and old) platforms (i.MX8MQ, F1C100s)
- A number of SPDX cleanups
- A workaround for a very broken GICv3 implementation
- A platform-msi fix
- Various cleanups
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull more operating performance points (OPP) framework changes for v4.21
from Viresh Kumar:
"- Fix missing OPP debugfs directory (Viresh Kumar).
- Make genpd performance states orthogonal to idlestates (Ulf
Hansson).
- Propagate performance state changes from genpd to its master (Viresh
Kumar).
- Minor improvement of some OPP helpers (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
PM / Domains: Propagate performance state updates
PM / Domains: Factorize dev_pm_genpd_set_performance_state()
PM / Domains: Save OPP table pointer in genpd
OPP: Don't return 0 on error from of_get_required_opp_performance_state()
OPP: Add dev_pm_opp_xlate_performance_state() helper
OPP: Improve _find_table_of_opp_np()
PM / Domains: Make genpd performance states orthogonal to the idlestates
OPP: Fix missing debugfs supply directory for OPPs
OPP: Use opp_table->regulators to verify no regulator case
|
|
Currently a genpd only handles the performance state requirements from
the devices under its control. This commit extends that to also handle
the performance state requirement(s) put on the master genpd by its
sub-domains. There is a separate value required for each master that
the genpd has and so a new field is added to the struct gpd_link
(link->performance_state), which represents the link between a genpd and
its master. The struct gpd_link also got another field
prev_performance_state, which is used by genpd core as a temporary
variable during transitions.
On a call to dev_pm_genpd_set_performance_state(), the genpd core first
updates the performance state of the masters of the device's genpd and
then updates the performance state of the genpd. The masters do the same
and propagate performance state updates to their masters before updating
their own. The performance state transition from genpd to its master is
done with the help of dev_pm_opp_xlate_performance_state(), which looks
at the OPP tables of both the domains to translate the state.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Separate out _genpd_set_performance_state() and
_genpd_reeval_performance_state() from
dev_pm_genpd_set_performance_state() to handle performance state update
related stuff. This will be used by a later commit.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
dev_pm_genpd_set_performance_state() will be required to call
dev_pm_opp_xlate_performance_state() going forward to translate from
performance state of a sub-domain to performance state of its master.
And dev_pm_opp_xlate_performance_state() needs pointers to the OPP
tables of both genpd and its master.
Lets fetch and save them while the OPP tables are added. Fetching the
OPP tables should never fail as we just added the OPP tables and so add
a WARN_ON() for such a bug instead of full error paths.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It's quite questionable whether genpd internally should care about if the
corresponding PM domain for a device is powered on, as to allow setting a
new performance state for it. The assumptions creates an unnecessary
limitation at this point, for both consumers and providers, but more
importantly it also makes the code more complicated.
Therefore, let's simplify the code to allow setting a performance state, by
invoking the ->set_performance_state() callback, no matter whether the PM
domain is powered on or off.
Do note, this change means genpd providers needs to restore the performance
state themselves during power on, via the ->power_on() callback. Moreover,
they may also need to check that the PM domain is powered on, from their
->set_performance_state() callback, before deciding to update the state.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Rather than checking the DMA attribute at each callsite, just pass it
through for acpi_dma_configure() to handle directly. That can then deal
with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly
installing dummy DMA ops instead of just skipping setup entirely. This
will then free up the dev->dma_ops == NULL case for some valuable
fastpath optimisations.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tony Luck <tony.luck@intel.com>
|
|
dma_get_required_mask should really be with the rest of the DMA mapping
implementation instead of in drivers/base as a lone outlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
|
|
Some interrupt controllers use separate bits for controlling rising
and falling edge interrupts in the mask register i.e. they have one
interrupt for rising edge and one for falling.
We already handle the case where we have a single interrupt in the
mask register and a separate type configuration register.
Add a new switch to regmap_irq_chip which tells the framework to use
the mask_base address for configuring the edge of the interrupts that
define type_falling/rising_mask values.
For such interrupts we never update the type_base bits. For interrupts
that don't define type masks or their regmap irq chip doesn't set the
type_in_mask to true everything stays the same.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the addition of platform MSI support, there were two helpers
supposed to allocate/free IRQs for a device:
platform_msi_domain_alloc_irqs()
platform_msi_domain_free_irqs()
In these helpers, IRQ descriptors are allocated in the "alloc" routine
while they are freed in the "free" one.
Later, two other helpers have been added to handle IRQ domains on top
of MSI domains:
platform_msi_domain_alloc()
platform_msi_domain_free()
Seen from the outside, the logic is pretty close with the former
helpers and people used it with the same logic as before: a
platform_msi_domain_alloc() call should be balanced with a
platform_msi_domain_free() call. While this is probably what was
intended to do, the platform_msi_domain_free() does not remove/free
the IRQ descriptor(s) created/inserted in
platform_msi_domain_alloc().
One effect of such situation is that removing a module that requested
an IRQ will let one orphaned IRQ descriptor (with an allocated MSI
entry) in the device descriptors list. Next time the module will be
inserted back, one will observe that the allocation will happen twice
in the MSI domain, one time for the remaining descriptor, one time for
the new one. It also has the side effect to quickly overshoot the
maximum number of allocated MSI and then prevent any module requesting
an interrupt in the same domain to be inserted anymore.
This situation has been met with loops of insertion/removal of the
mvpp2.ko module (requesting 15 MSIs each time).
Fixes: 552c494a7666 ("platform-msi: Allow creation of a MSI-based stacked irq domain")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Currently the node name is being formatting into a temporary string
node_name, however, kobject_init_and_add allows one to format up
a node name, so use that instead. This removes the need for the
node_name string and also cleans up the following warning:
Fixes clang warning:
warning: format string is not a string literal (potentially
insecure) [-Wformat-security]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use %ptR instead of open coded variant to print content of
struct rtc_time in human readable format.
Cc: linux-pm@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework changes for v4.21
from Viresh Kumar.
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Remove of_dev_pm_opp_find_required_opp()
OPP: Rename and relocate of_genpd_opp_to_performance_state()
OPP: Configure all required OPPs
OPP: Add dev_pm_opp_{set|put}_genpd_virt_dev() helper
PM / Domains: Add genpd_opp_to_performance_state()
OPP: Populate OPPs from "required-opps" property
OPP: Populate required opp tables from "required-opps" property
OPP: Separate out custom OPP handler specific code
OPP: Identify and mark genpd OPP tables
PM / Domains: Rename genpd virtual devices as virt_dev
|
|
Propagate error code back to userspace if writing the /sys/.../uevent
file fails. Before, the write operation always returned with success,
even if we failed to recognize the input string or if we failed to
generate the uevent itself.
With the error codes properly propagated back to userspace, we are
able to react in userspace accordingly by not assuming and awaiting
a uevent that is not delivered.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the async_synchronize_full call out of __device_release_driver and
into driver_detach.
The idea behind this is that the async_synchronize_full call will only
guarantee that any existing async operations are flushed. This doesn't do
anything to guarantee that a hotplug event that may occur while we are
doing the release of the driver will not be asynchronously scheduled.
By moving this into the driver_detach path we can avoid potential deadlocks
as we aren't holding the device lock at this point and we should not have
the driver we want to flush loaded so the flush will take care of any
asynchronous events the driver we are detaching might have scheduled.
Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The platform_device_register_full() might return an error pointer. If we
instantiate platform device which is optional we may simplify the routine at
removal stage by simply calling platform_device_unregister(). For now it
requires to check parameter for being an error pointer in each caller.
To make users' life easier, check for an error pointer inside driver core.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current kref and kobject documentation may be
insufficient to understand these common pitfalls regarding
object lifetime and object releasing.
Add a bit more documentation and improve the warnings
seen by the user, pointing to the right piece of documentation.
Also, it's important to understand that making fun of people
publicly is not at all helpful, doesn't provide any value,
and it's not a healthy way of encouraging developers to do better.
"Mocking mercilessly" will, if anything, make developers feel bad
and go away. This kind of behavior should not be encouraged or justified.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Let's use the easier to read (and not mess up) variants:
- Use DEVICE_ATTR_RO
- Use DEVICE_ATTR_WO
- Use DEVICE_ATTR_RW
instead of the more generic DEVICE_ATTR() we're using right now.
We have to rename most callback functions. By fixing the intendations we
can even save some LOCs.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The simple_strto{l,ul} are deprecated, use kstrtou{l,ul} instead.
Signed-off-by: Kaitao cheng <pilgrimtao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replacing struct property_set with the software nodes that
were just introduced.
The API and functionality for adding properties to devices
remains the same, however, the goal is to convert the
drivers to use the API for software nodes when the device
has no real firmware node, and use the old API only when
"extra" build-in properties are needed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Concentrating struct property_entry processing to
drivers/base/swnode.c
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Software node is a new struct fwnode_handle type that can be
used to describe devices in kernel (software). It is meant
to complement fwnodes representing real firmware nodes when
they are incomplete (for example missing device properties)
and to supply the primary fwnode when the firmware lacks
hardware description for a device completely.
The software node type is really meant to replace the
currently used "property_set" struct fwnode_handle type. The
handling of struct property_set is glued to the generic
device property handling code, and it is not possible to
create a struct property_set independently from the device
that it is bind to. struct property_set is only created when
device properties are added to already initialized struct
device, and control of it is only possible from the generic
property handling code.
Software nodes are instead designed to be created
independently from the device entries (struct device). It
makes them much more flexible, as then the device meant to
be bind to the node can be created at a later time, and from
another location. It is also possible to bind multiple
devices to a single software node if needed.
The software node implementation also includes support for
node hierarchy, which was the main motivation for this
commit. The node hierarchy was something that was requested
for the struct property_set, but it did not seem reasonable
to try to extend the property_set support for that purpose.
struct property_set was really meant only for device
property handling like the name suggests.
Support for struct property_set is not yet removed in this
commit, but it will be in the following one.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of relying on the "platform_notify" callback hook,
introducing separate notification function
acpi_platform_notify() and calling that directly from
drivers core when device entries are added and removed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since it should be possible to support several hardware
description models at the same time (at least in theory),
for example ACPI and devicetree on a running system, the
platform notifications need to be handled differently.
For now a single "platform_notify" callback function was
used to notify the underlying base system which is in charge
of the hardware description when a new device entry was
added to the system, but that callback is available to only
a single base system at the time. This will add a function
device_platform_notify() and replace all direct
platform_notify() calls with it.
device_platform_notify() will first simply call the
platform_notify() callback, so this commit has no functional
affect, however, the idea is that individual base systems
will put their direct notification calls there instead of
using the platform_notify function pointer.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
device_remove_properties() is called for every device in device_del().
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Initially we bumped into problem with 32-bit aligned atomic64_t
on ARC, see [1]. And then during quite lengthly discussion Peter Z.
mentioned ARCH_KMALLOC_MINALIGN which IMHO makes perfect sense.
If allocation is done by plain kmalloc() obtained buffer will be
ARCH_KMALLOC_MINALIGN aligned and then why buffer obtained via
devm_kmalloc() should have any other alignment?
This way we at least get the same behavior for both types of
allocation.
[1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004009.html
[2] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004036.html
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@vger.kernel.org> # 4.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct function name and spelling/typo for device_block_probing()
in drivers/base/dd.c.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The simple_strtol() function is deprecated, use kstrtoint() instead.
Signed-off-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The OPP core already has the performance state values for each of the
genpd's OPPs and there is no need to call the genpd callback again to
get the performance state for the case where the end device doesn't have
an OPP table and has the "required-opps" property directly in its node.
This commit renames of_genpd_opp_to_performance_state() as
of_get_required_opp_performance_state() and moves it to the OPP core, as
it is all about OPP stuff now.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The OPP core currently stores the performance state in the consumer
device's OPP table, but that is going to change going forward and
performance state will rather be set directly in the genpd's OPP table.
For that we need to get the performance state for genpd's device
structure (genpd->dev) instead of the consumer device's structure. Add a
new helper to do that.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
There are several struct device instances that genpd core handles. The
most common one is the consumer device structure, which is named
(correctly) as "dev" within genpd core. The second one is the genpd's
device structure, referenced as genpd->dev. The third one is the virtual
device structures created by the genpd core to represent the consumer
device for multiple power domain case, currently named as genpd_dev. The
naming of these virtual devices isn't very clear or readable and it
looks more like the genpd->dev.
Rename the virtual device instances within the genpd core as "virt_dev".
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
There seem to be some problems as result of 30467e0b3be ("mm, hotplug:
fix concurrent memory hot-add deadlock"), which tried to fix a possible
lock inversion reported and discussed in [1] due to the two locks
a) device_lock()
b) mem_hotplug_lock
While add_memory() first takes b), followed by a) during
bus_probe_device(), onlining of memory from user space first took a),
followed by b), exposing a possible deadlock.
In [1], and it was decided to not make use of device_hotplug_lock, but
rather to enforce a locking order.
The problems I spotted related to this:
1. Memory block device attributes: While .state first calls
mem_hotplug_begin() and the calls device_online() - which takes
device_lock() - .online does no longer call mem_hotplug_begin(), so
effectively calls online_pages() without mem_hotplug_lock.
2. device_online() should be called under device_hotplug_lock, however
onlining memory during add_memory() does not take care of that.
In addition, I think there is also something wrong about the locking in
3. arch/powerpc/platforms/powernv/memtrace.c calls offline_pages()
without locks. This was introduced after 30467e0b3be. And skimming over
the code, I assume it could need some more care in regards to locking
(e.g. device_online() called without device_hotplug_lock. This will
be addressed in the following patches.
Now that we hold the device_hotplug_lock when
- adding memory (e.g. via add_memory()/add_memory_resource())
- removing memory (e.g. via remove_memory())
- device_online()/device_offline()
We can move mem_hotplug_lock usage back into
online_pages()/offline_pages().
Why is mem_hotplug_lock still needed? Essentially to make
get_online_mems()/put_online_mems() be very fast (relying on
device_hotplug_lock would be very slow), and to serialize against
addition of memory that does not create memory block devices (hmm).
[1] http://driverdev.linuxdriverproject.org/pipermail/ driverdev-devel/
2015-February/065324.html
This patch is partly based on a patch by Vitaly Kuznetsov.
Link: http://lkml.kernel.org/r/20180925091457.28651-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.
In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g. from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock"). add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.
Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.
The lock is not held yet in
drivers/xen/balloon.c
arch/powerpc/platforms/powernv/memtrace.c
drivers/s390/char/sclp_cmd.c
drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.
Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module. If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).
Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
