| Age | Commit message (Collapse) | Author |
|---|
|
DEFINE_RES_IRQ returns struct resource type, so it is
unnecessary to cast it to struct resource.
Remove the unnecessary cast to fix the following sparse warnings:
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast to non-scalar
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast from non-scalar
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240917233827.73167-1-minhuadotchen@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
|
|
In case of error in gtdt_parse_timer_block() invalid 'gtdt_frame'
will be used in 'do {} while (i-- >= 0 && gtdt_frame--);' statement block
because do{} block will be executed even if 'i == 0'.
Adjust error handling procedure by replacing 'i-- >= 0' with 'i-- > 0'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240827101239.22020-1-amishin@t-argos.ru
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CONFIG_HAS_IOPORT will soon become optional and cause a build time
failure when it is disabled but a driver calls inb()/outb(). At the
moment, all architectures that can support ACPI have port I/O, but this
is not necessarily the case in the future on non-x86 architectures.
The result is a set of errors like:
drivers/acpi/osl.c: In function 'acpi_os_read_port':
include/asm-generic/io.h:542:14: error: call to '_inb' declared with attribute error: inb()) requires CONFIG_HAS_IOPORT
Nothing should actually call these functions in this configuration,
and if it does, the result would be undefined behavior today, possibly
a NULL pointer dereference.
Change the low-level functions to return a proper error code when
HAS_IOPORT is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241030123701.1538919-2-arnd@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The majority of the processor_perflib code is only used by cpufreq
drivers on the x86 architecture and makes no sense without the
x86 SMI interactions that rely on I/O port access.
Replace the existing #ifdef checks with one that covers all of the
code that is only used by x86 drivers, saving a little bit
of kernel code size on other architectures.
There is likely more code under CONFIG_ACPI_PROCESSOR that falls
into this category, but changing those would require a larger
rework.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241030123701.1538919-1-arnd@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI device enumeration code.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-9-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI SBSHC driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-8-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI SBS driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-7-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI power resource driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-6-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI pci_root driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-5-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI pci_link driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-4-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI event driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-3-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI EC driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-2-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI APD driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-1-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
strcpy() is generally considered unsafe and use of strscpy() is
recommended [1].
Also using strscpy() instead of strcpy() makes the following checkpatch
warning go away:
WARNING: Prefer strscpy over strcpy
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Link: https://patch.msgid.link/20240913211156.103864-1-abdul.rahim@myyahoo.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The IORT spec, Issue E.f (April 2024), adds a new CANWBS bit to the Memory
Access Flag field in the Memory Access Properties table, mainly for a PCI
Root Complex.
This CANWBS defines the coherency of memory accesses to be not marked IOWB
cacheable/shareable. Its value further implies the coherency impact from a
pair of mismatched memory attributes (e.g. in a nested translation case):
0x0: Use of mismatched memory attributes for accesses made by this
device may lead to a loss of coherency.
0x1: Coherency of accesses made by this device to locations in
Conventional memory are ensured as follows, even if the memory
attributes for the accesses presented by the device or provided by
the SMMU are different from Inner and Outer Write-back cacheable,
Shareable.
Note that the loss of coherency on a CANWBS-unsupported HW typically could
occur to an SMMU that doesn't implement the S2FWB feature where additional
cache flush operations would be required to prevent that from happening.
Add a new ACPI_IORT_MF_CANWBS flag and set IOMMU_FWSPEC_PCI_RC_CANWBS upon
the presence of this new flag.
CANWBS and S2FWB are similar features, in that they both guarantee the VM
can not violate coherency, however S2FWB can be bypassed by PCI No Snoop
TLPs, while CANWBS cannot. Thus CANWBS meets the requirements to set
IOMMU_CAP_ENFORCE_CACHE_COHERENCY.
Architecturally ARM has expected that VFIO would disable No Snoop through
PCI Config space, if this is done then the two would have the same
protections.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 0710c1ce5045 ("ACPI: battery: initialize mutexes through devm_ APIs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241030162754.2110946-1-andriy.shevchenko@linux.intel.com
[ rjw: Added 2 empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As suggested by Marc and Lorenzo, first we need to check whether the
platform_timer entry pointer is within gtdt bounds (< gtdt_end) before
de-referencing what it points at to detect the length of the platform
timer struct and then check that the length of current platform_timer
struct is also valid, i.e. the length is not zero and within gtdt_end.
Now next_platform_timer() only checks against gtdt_end for the entry of
subsequent platform timer without checking the length of it and will
not report error if the check failed and the existing check in function
acpi_gtdt_init() is also not enough.
Modify the for_each_platform_timer() iterator and use it combined with
a dedicated check function platform_timer_valid() to do the check
against table length (gtdt_end) for each element of platform timer
array in function acpi_gtdt_init(), making sure that both their entry
and length actually fit in the table.
Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20241016095458.34126-1-zhengzengkai@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The following BUG was triggered:
=============================
[ BUG: Invalid wait context ]
6.12.0-rc2-XXX #406 Not tainted
-----------------------------
kworker/1:1/62 is trying to lock:
ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370
other info that might help us debug this:
context-{5:5}
2 locks held by kworker/1:1/62:
#0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50
#1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280
stack backtrace:
CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406
Workqueue: 0x0 (events)
Call trace:
dump_backtrace+0xa4/0x130
show_stack+0x20/0x38
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x28
__lock_acquire+0x480/0x1ad8
lock_acquire+0x114/0x310
_raw_spin_lock+0x50/0x70
cpc_write+0xcc/0x370
cppc_set_perf+0xa0/0x3a8
cppc_cpufreq_fast_switch+0x40/0xc0
cpufreq_driver_fast_switch+0x4c/0x218
sugov_update_shared+0x234/0x280
update_load_avg+0x6ec/0x7b8
dequeue_entities+0x108/0x830
dequeue_task_fair+0x58/0x408
__schedule+0x4f0/0x1070
schedule+0x54/0x130
worker_thread+0xc0/0x2e8
kthread+0x130/0x148
ret_from_fork+0x10/0x20
sugov_update_shared() locks a raw_spinlock while cpc_write() locks a
spinlock.
To have a correct wait-type order, update rmw_lock to a raw spinlock and
ensure that interrupts will be disabled on the CPU holding it.
Fixes: 60949b7b8054 ("ACPI: CPPC: Fix MASK_VAL() usage")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20241028125657.1271512-1-pierre.gondois@arm.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
|
|
Merge new DMI quirks for 6.12-rc5:
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel).
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar).
* acpi-resource:
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
* acpi-button:
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
|
|
The embedded controller code is mainly used on x86 laptops and cannot
work without PC style I/O port access.
Make this a user-visible configuration option that is default enabled
on x86 but otherwise disabled, and that can never be enabled unless
CONFIG_HAS_IOPORT is also available.
The empty stubs in internal.h help ignore the EC code in configurations
that don't support it. In order to see those stubs, the sbshc code also
has to include this header and drop duplicate declarations.
All the direct callers of ec_read/ec_write already had an x86
dependency and now also need to depend on APCI_EC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The variable ret is initialized to zero and a littler later in
the PFRT_LOG_IOC_GET_INFO case of a switch statement is being checked
for negative error value. Since ret has not been re-assigned since
the initialization ret can never be less than zero so the check is
redundant and can be removed. Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241014130522.1986428-1-colin.i.king@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When the nominal_freq recorded by the kernel is equal to the lowest_freq,
and the frequency adjustment operation is triggered externally, there is
a logic error in cppc_perf_to_khz()/cppc_khz_to_perf(), resulting in perf
and khz conversion errors.
Fix this by adding a branch processing logic when nominal_freq is equal
to lowest_freq.
Fixes: ec1c7ad47664 ("cpufreq: CPPC: Fix performance/frequency conversion")
Signed-off-by: liwei <liwei728@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241024022952.2627694-1-liwei728@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clang 19 prints a warning when we pass &th->guid to efi_pa_va_lookup():
drivers/acpi/prmt.c:156:29: error: passing 1-byte aligned argument to
4-byte aligned parameter 1 of 'efi_pa_va_lookup' may result in an
unaligned pointer access [-Werror,-Walign-mismatch]
156 | (void *)efi_pa_va_lookup(&th->guid, handler_info->handler_address);
| ^
The problem is that efi_pa_va_lookup() takes a efi_guid_t and &th->guid
is a regular guid_t. The difference between the two types is the
alignment. efi_guid_t is a typedef.
typedef guid_t efi_guid_t __aligned(__alignof__(u32));
It's possible that this a bug in Clang 19. Even though the alignment of
&th->guid is not explicitly specified, it will still end up being aligned
at 4 or 8 bytes.
Anyway, as Ard points out, it's cleaner to change guid to efi_guid_t type
and that also makes the warning go away.
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/3777d71b-9e19-45f4-be4e-17bf4fa7a834@stanley.mountain
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
detection issue
Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state
detection issue.
The _LID device incorrectly returns the lid status as "closed" during
boot, causing the system to enter a suspend loop right after booting.
The quirk ensures that the correct lid state is reported initially,
preventing the system from immediately suspending after startup. It
only addresses the initial lid state detection and ensures proper
system behavior upon boot.
Signed-off-by: Shubham Panwar <shubiisp8@gmail.com>
Link: https://patch.msgid.link/20241020095045.6036-2-shubiisp8@gmail.com
[ rjw: Changelog edits ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The LG Gram Pro 16 2-in-1 (2024) the 16T90SP has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the 16T90SP to the irq1_level_low_skip_override[] quirk table to fix
this.
Reported-by: Dirk Holten <dirk.holten@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219382
Cc: All applicable <stable@vger.kernel.org>
Suggested-by: Dirk Holten <dirk.holten@gmx.de>
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20241017-lg-gram-pro-keyboard-v2-1-7c8fbf6ff718@heusel.eu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PRMT needs to find the correct type of block to translate the PA-VA
mapping for EFI runtime services.
The issue arises because the PRMT is finding a block of type
EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services
as described in Section 2.2.2 (Runtime Services) of the UEFI
Specification [1]. Since the PRM handler is a type of runtime service,
this causes an exception when the PRM handler is called.
[Firmware Bug]: Unable to handle paging request in EFI runtime service
WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341
__efi_queue_work+0x11c/0x170
Call trace:
Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM
context.
If no suitable block is found, a warning message will be printed, but
the procedure continues to manage the next PRM handler.
However, if the PRM handler is actually called without proper allocation,
it would result in a failure during error handling.
By using the correct memory types for runtime services, ensure that the
PRM handler and the context are properly mapped in the virtual address
space during runtime, preventing the paging request error.
The issue is really that only memory that has been remapped for runtime
by the firmware can be used by the PRM handler, and so the region needs
to have the EFI_MEMORY_RUNTIME attribute.
Link: https://uefi.org/sites/default/files/resources/UEFI_Spec_2_10_Aug29.pdf # [1]
Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Koba Ko <kobak@nvidia.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20241012205010.4165798-1-kobak@nvidia.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
power_supply_register_no_ws() is going to be removed.
Switch to the general registration API.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20241005-power-supply-no-wakeup-source-v1-2-1d62bf9bcb1d@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Reduce the number of ACPI IRQ override DMI quirks by combining quirks
that cover similar systems while making them cover additional models
at the same time (Hans de Goede)"
* tag 'acpi-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fold Asus Vivobook Pro N6506M* DMI quirks together
ACPI: resource: Fold Asus ExpertBook B1402C* and B1502C* DMI quirks together
ACPI: resource: Make Asus ExpertBook B2502 matches cover more models
ACPI: resource: Make Asus ExpertBook B2402 matches cover more models
|
|
Asus Vivobook Pro 15 OLED comes in 3 N6506M* models:
N6506MU: Intel Ultra 9 185H, 3K OLED, RTX4060
N6506MV: Intel Ultra 7 155H, 3K OLED, RTX4050
N6506MJ: Intel Ultra 7 155H, FHD OLED, RTX3050
Fold the 3 DMI quirks for these into a single quirk to reduce the number
of quirks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-5-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Asus has 2 ExpertBook B1402C models:
B1402CBA with 12th gen Intel CPUs
B1402CVA with 13th gen Intel CPUs
Fold the 2 DMI quirks for these into a single quirk to reduce the number
of quirks.
Likewise Asus has 3 ExpertBook B1502C models:
B1502CBA with 12th gen Intel CPUs
B1502CGA with 12th gen Intel N-series CPUs
B1502CVA with 13th gen Intel CPUs
Fold the 3 DMI quirks for these into a single quirk to reduce the number
of quirks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-4-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the various 14" Asus ExpertBook B2 B2402* models there are also
4 variants of the 15" Asus ExpertBook B2 B2502* models:
B2502CBA: 12th gen Intel CPU, non flip
B2502FBA: 12th gen Intel CPU, flip
B2502CVA: 13th gen Intel CPU, non flip
B2502FVA: 13th gen Intel CPU, flip
Currently there already are DMI quirks for the B2502CBA, B2502FBA and
B2502CVA models. Asus website shows that there also is a B2502FVA.
Rather then adding a 4th quirk fold the 3 existing quirks into a single
quirk covering B2502* to also cover the last model while at the same time
reducing the number of quirks.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-3-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Asus ExpertBook B2402CBA / B2402FBA are the non flip / flip versions
of the 14" Asus ExpertBook B2 with 12th gen Intel processors.
It has been reported that the B2402FVA which is the 14" Asus ExpertBook
B2 flip with 13th gen Intel processors needs to skip the IRQ override too.
And looking at Asus website there also is a B2402CVA which is the non flip
model with 13th gen Intel processors.
Summarizing the following 4 models of the Asus ExpertBook B2 are known:
B2402CBA: 12th gen Intel CPU, non flip
B2402FBA: 12th gen Intel CPU, flip
B2402CVA: 13th gen Intel CPU, non flip
B2402FVA: 13th gen Intel CPU, flip
Fold the 2 existing quirks for the B2402CBA and B2402FBA into a single
quirk covering B2402* to also cover the 2 other models while at the same
time reducing the number of quirks.
Reported-by: Stefan Blum <stefan.blum@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/a983e6d5-c7ab-4758-be9b-7dcfc1b44ed3@gmail.com/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-2-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use the recommended macro to define the PM ops.
Also use pm_sleep_ptr() when assigning the ops to the driver.
This allows the removal of the ifdef CONFIG_PM_SLEEP.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240904-acpi-battery-cleanups-v1-4-a3bf74f22d40@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Simplify the cleanup logic a bit.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240904-acpi-battery-cleanups-v1-3-a3bf74f22d40@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Simplify the cleanup logic a bit.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240904-acpi-battery-cleanups-v1-2-a3bf74f22d40@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This function call can fail, check for that.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240904-acpi-battery-cleanups-v1-1-a3bf74f22d40@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Ira Weiny:
- Fix calculation for SBDF in error injection
* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
EINJ, CXL: Fix CXL device SBDF calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix up the ACPI IRQ override quirk list and add two new entries
to it, add a new quirk to the ACPI backlight (video) driver, and fix
the ACPI battery driver.
Specifics:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight
(video) driver (Hans de Goede)
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf)
- Fix up the ACPI IRQ override quirk list and add quirks for Asus
Vivobook X1704VAP and Asus ExpertBook B2502CVA to it (Hans de
Goede)"
* tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[]
ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[]
ACPI: resource: Loosen the Asus E1404GAB DMI match to also cover the E1404GA
ACPI: resource: Remove duplicate Asus E1504GAB IRQ override
|
|
Merge an ACPI backlight (video) quirk and ACPI battery driver fix and
cleanup for 6.12-rc2:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight (video)
driver (Hans de Goede).
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf).
* acpi-video:
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
* acpi-battery:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
When a battery hook returns an error when adding a new battery, then
the battery hook is automatically unregistered.
However the battery hook provider cannot know that, so it will later
call battery_hook_unregister() on the already unregistered battery
hook, resulting in a crash.
Fix this by using the list head to mark already unregistered battery
hooks as already being unregistered so that they can be ignored by
battery_hook_unregister().
Fixes: fa93854f7a7e ("battery: Add the battery hooking API")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20241001212835.341788-3-W_Armin@gmx.de
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the conditional locking from __battery_hook_unregister()
into battery_hook_unregister() and rename the low-level function
to simplify the locking during battery hook removal.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20241001212835.341788-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Dell All In One (AIO) models released after 2017 may use a backlight
controller board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
The Dell OptiPlex 5480 AIO has an ACPI device for one of its UARTs with
the above _HID + _CID. Loading the dell-uart-backlight driver fails with
the following errors:
[ 18.261353] dell_uart_backlight serial0-0: Timed out waiting for response.
[ 18.261356] dell_uart_backlight serial0-0: error -ETIMEDOUT: getting firmware version
[ 18.261359] dell_uart_backlight serial0-0: probe with driver dell_uart_backlight failed with error -110
Indicating that there is no backlight controller board attached to
the UART, while the GPU's native backlight control method does work.
Add a quirk to use the GPU's native backlight control method on this model.
Fixes: cd8e468efb4f ("ACPI: video: Add Dell UART backlight controller detection")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240918153849.37221-1-hdegoede@redhat.com
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like other Asus ExpertBook models the B2502CVA has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the B2502CVA to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217760
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240927141606.66826-4-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like other Asus Vivobook models the X1704VAP has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the X1704VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Reported-by: Lamome Julien <julien.lamome@wanadoo.fr>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1078696
Closes: https://lore.kernel.org/all/1226760b-4699-4529-bf57-6423938157a3@wanadoo.fr/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240927141606.66826-3-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like other Asus Vivobooks, the Asus Vivobook Go E1404GA has a DSDT
describing IRQ 1 as ActiveLow, while the kernel overrides to Edge_High.
$ sudo dmesg | grep DMI:.*BIOS
[ 0.000000] DMI: ASUSTeK COMPUTER INC. Vivobook Go E1404GA_E1404GA/E1404GA, BIOS E1404GA.302 08/23/2023
$ sudo cp /sys/firmware/acpi/tables/DSDT dsdt.dat
$ iasl -d dsdt.dat
$ grep -A 30 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
There already is an entry in the irq1_level_low_skip_override[] DMI match
table for the "E1404GAB", change this to match on "E1404GA" to cover
the E1404GA model as well (DMI_MATCH() does a substring match).
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240927141606.66826-2-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit d2aaf1996504 ("ACPI: resource: Add DMI quirks for ASUS Vivobook
E1504GA and E1504GAB") does exactly what the subject says, adding DMI
matches for both the E1504GA and E1504GAB.
But DMI_MATCH() does a substring match, so checking for E1504GA will also
match E1504GAB.
Drop the unnecessary E1504GAB entry since that is covered already by
the E1504GA entry.
Fixes: d2aaf1996504 ("ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240927141606.66826-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
