| Age | Commit message (Collapse) | Author |
|---|
|
On x86/ACPI boards the acpi_video driver will usually initialize before
the kms driver (except i915). This causes /sys/class/backlight/acpi_video0
to show up and then the kms driver registers its own native backlight
device after which the drivers/acpi/video_detect.c code unregisters
the acpi_video0 device (when acpi_video_get_backlight_type()==native).
This means that userspace briefly sees 2 devices and the disappearing of
acpi_video0 after a brief time confuses the systemd backlight level
save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this make backlight class device registration a separate step
done by a new acpi_video_register_backlight() function. The intend is for
this to be called by the drm/kms driver *after* it is done setting up its
own native backlight device. So that acpi_video_get_backlight_type() knows
if a native backlight will be available or not at acpi_video backlight
registration time, avoiding the add + remove dance.
Note the new acpi_video_register_backlight() function is also called from
a delayed work to ensure that the acpi_video backlight devices does get
registered if necessary even if there is no drm/kms driver or when it is
disabled.
Changes in v2:
- Make register_backlight_delay a module parameter, mainly so that it can
be disabled by Nvidia binary driver users
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When acpi_video_register() has not run yet the video_bus_head will be
empty, so there is no need to check the register_count flag first.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move the list_del removing an acpi_video_bus from video_bus_head
on teardown to before the teardown is done, to avoid code iterating
over the video_bus_head list seeing acpi_video_bus objects on there
which are (partly) torn down already.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_video_get_backlight_type()
All x86/ACPI kms drivers which register native/BACKLIGHT_RAW type
backlight devices call acpi_video_backlight_use_native() now. This sets
__acpi_video_get_backlight_type()'s internal static native_available flag.
This makes the backlight_device_get_by_type(BACKLIGHT_RAW) check
unnecessary.
Relying on the cached native_available value not only is simpler, it will
also work correctly in cases where then native backlight registration was
skipped because of acpi_video_backlight_use_native() returning false.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In principle, it should be valid to pass NULL as the ACPI device
pointer to acpi_device_get_power() and acpi_device_set_power() and they
both are expected to return -EINVAL in that case, but that has been
broken recently by commit 62fcb99bdf10 ("ACPI: Drop parent field from
struct acpi_device") which has caused the ACPI device pointer to be
dereferenced in these functions before the NULL check.
Fix that and while at it make acpi_device_set_power() only use the
parent field if the target ACPI device object's ignore_parent flag
in not set.
Fixes: 62fcb99bdf10 ("ACPI: Drop parent field from struct acpi_device")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-processor:
ACPI: processor: Remove freq Qos request for all CPUs
|
|
Return the value from driver_register() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
didn't handle mux control properly.
This was fixed by commit 8e55f99c510f ("drm/i915: Invoke another _DSM
to enable MUX on HP Workstation laptops"), so vendors shouldn't be
using this string to modify ASL any more.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
didn't handle HDMI properly.
This was fixed by commit b516ea586d71 ("PCI: Enable NVIDIA HDA
controllers"), so vendors shouldn't be using this string to modify
ASL any more.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
had bugs supporting RTD3 in the past.
Before proprietary NVIDIA driver started to support RTD3, Ubuntu had
had a mechanism for switching PRIME on and off, though it had required
to logout/login to make the library switch happen.
When the PRIME had been off, the mechanism had unloaded the NVIDIA
driver and put the device into D3cold, but the GPU had never come back
to D0 again which is why ODMs used the _OSI to expose an old _DSM
method to switch the power on/off.
That has been fixed by commit 5775b843a619 ("PCI: Restore config space
on runtime resume despite being unbound"). so vendors shouldn't be
using this string to modify ASL any more.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make acpi_cpc_valid() check if ACPI is disabled, so that its callers
don't need to check that separately. This will also cause the AMD
pstate driver to refuse to load right away when ACPI is disabled.
Also update the warning message in amd_pstate_init() to mention the
ACPI disabled case for completeness.
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the default association from integer maximum value checks. It is
not necessary and has caused a bug in other associations being unnoticed.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI node pointers are attached to data node handles, in order to resolve
string references to them. _DSD guide allows the same node to be reached
from multiple parent nodes, leading the node enumeration algorithm to each
such nodes more than once. As attached data already already exists,
attaching data with the same tag will fail. Address this problem by
ignoring nodes that have been already tagged.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current code expects the type of the value to be an integer type,
instead the value passed to the macro is a pointer.
Ensure the size comparison uses the correct pointer type to choose the
max value, instead of using the integer type.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: John Garry <john.garry@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The parent field in struct acpi_device is, in fact, redundant,
because the dev.parent field in it effectively points to the same
object and it is used by the driver core.
Accordingly, the parent field can be dropped from struct acpi_device
and for this purpose define acpi_dev_parent() to retrieve a parent
struct acpi_device pointer from the dev.parent field in struct
acpi_device. Next, update all of the users of the parent field
in struct acpi_device to use acpi_dev_parent() instead of it and
drop it.
While at it, drop the ACPI_IS_ROOT_DEVICE() macro that is only used
in one place in a confusing way.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The documentation for acpi_dev_state_d0() referred to
Documentation/firmware-guide/acpi/low-power-probe.rst that does not exist,
the right file name is Documentation/firmware-guide/acpi/non-d0-probe.rst.
Fix this.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of having acpi_device_add() defined as a wrapper around
__acpi_device_add(), export acpi_tie_acpi_dev() so it can be called
directly by acpi_add_power_resource(), fold acpi_device_add() into the
latter and rename __acpi_device_add() to acpi_device_add().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
The initialization of ACPI device objects is split between
acpi_init_device_object() and __acpi_device_add() that initializes
the dev field in struct acpi_device. The "release" function pointer
is passed to __acpi_device_add() for this reason.
However, that split is artificial and all of the initialization can
be carried out by acpi_init_device_object(), so rearrange the code
to that end. In particular, make acpi_init_device_object() take the
"release" pointer as an argument, along with the "type" which is
related to it, instead of __acpi_device_add().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
The acpi_bus_get_parent() name doesn't really reflect the
purpose of the function so change it to a more accurate
acpi_find_parent_acpi_dev().
While at it, rearrange the code inside that function to make it
easier to read.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
Because acpi_bus_get_acpi_device() is completely analogous to
acpi_fetch_acpi_dev(), rename it to acpi_get_acpi_dev() and
add a kerneldoc comment to it.
Accordingly, rename acpi_bus_put_acpi_device() to acpi_put_acpi_dev()
and update all of the users of these two functions.
While at it, move the acpi_fetch_acpi_dev() header next to the
acpi_get_acpi_dev() header in the header file holding them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
The freq Qos request would be removed repeatedly if the cpufreq policy
relates to more than one CPU. Then, it would cause the "called for unknown
object" warning.
Remove the freq Qos request for each CPU relates to the cpufreq policy,
instead of removing repeatedly for the last CPU of it.
Fixes: a1bb46c36ce3 ("ACPI: processor: Add QoS requests for all CPUs")
Reported-by: Jeremy Linton <Jeremy.Linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ATM on x86 laptops where we want userspace to use the acpi_video backlight
device we often register both the GPU's native backlight device and
acpi_video's firmware acpi_video# backlight device. This relies on
userspace preferring firmware type backlight devices over native ones, but
registering 2 backlight devices for a single display really is undesirable.
On x86 laptops where the native GPU backlight device should be used,
the registering of other backlight devices is avoided by their drivers
using acpi_video_get_backlight_type() and only registering their backlight
if the return value matches their type.
acpi_video_get_backlight_type() uses
backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
driver is available and will never return native if this returns
false. This means that the GPU's native backlight registering code
cannot just call acpi_video_get_backlight_type() to determine if it
should register its backlight, since acpi_video_get_backlight_type() will
never return native until the native backlight has already registered.
To fix this add a new internal native function parameter to
acpi_video_get_backlight_type(), which when set to true will make
acpi_video_get_backlight_type() behave as if a native backlight has
already been registered.
And add a new acpi_video_backlight_use_native() helper, which sets this
to true, for use in native GPU backlight code.
Changes in v2:
- Replace adding a native parameter to acpi_video_get_backlight_type() with
adding a new acpi_video_backlight_use_native() helper.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix up direct references to the fwnode field in struct device
and extend ACPI device properties support.
Specifics:
- Replace direct references to the fwnode field in struct device with
dev_fwnode() and device_match_fwnode() (Andy Shevchenko)
- Make the ACPI code handling device properties support properties
with buffer values (Sakari Ailus)"
* tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: VIOT: Do not dereference fwnode in struct device
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.
* acpi-properties:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
buf.pointer, memory for storing _DSD data and nodes, was released if either
parsing properties or, as recently added, attaching data node tags failed.
Alas, properties were still left pointing to this memory if parsing
properties were successful but attaching data node tags failed.
Fix this by separating error handling for the two, and leaving properties
intact if data nodes cannot be tagged for a reason or another.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Drop unrelated white space change ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In order to make the underneath API easier to change in the future,
prevent users from dereferencing fwnode from struct device.
Instead, use the specific dev_fwnode() and device_match_fwnode()
APIs for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- The most intrusive patch is small and changes the default allocation
policy for DMA addresses.
Before the change the allocator tried its best to find an address in
the first 4GB. But that lead to performance problems when that space
gets exhaused, and since most devices are capable of 64-bit DMA these
days, we changed it to search in the full DMA-mask range from the
beginning.
This change has the potential to uncover bugs elsewhere, in the
kernel or the hardware. There is a Kconfig option and a command line
option to restore the old behavior, but none of them is enabled by
default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for the
dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
iommu/amd: Fix compile warning in init code
iommu/amd: Add support for AVIC when SNP is enabled
iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
ACPI/IORT: Fix build error implicit-function-declaration
drivers: iommu: fix clang -wformat warning
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
iommu/amd: Set translation valid bit only when IO page tables are in use
iommu/amd: Introduce function to check and enable SNP
iommu/amd: Globally detect SNP support
iommu/amd: Process all IVHDs before enabling IOMMU features
iommu/amd: Introduce global variable for storing common EFR and EFR2
iommu/amd: Introduce Support for Extended Feature 2 Register
iommu/amd: Change macro for IOMMU control register bit shift to decimal value
iommu/exynos: Enable default VM instance on SysMMU v7
iommu/exynos: Add SysMMU v7 register set
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat shows, we've had lots of developments in a wide range
at this time; the majority of changes are about ASoC, including
subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
new drivers (as usual), while there have been some significant (but
almost invisible) improvements in ALSA core side, too.
Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user won't
notice, but on the devices with tons of control elements, it can be
visibly faster
- Support for input validation for controls; this will harden for
badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential
deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer in
situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some board
integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on
i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel
MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)"
* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
ALSA: line6: Replace sprintf() with sysfs_emit()
ALSA: hda: Replace sprintf() with sysfs_emit()
ALSA: pcm: Replace sprintf() with sysfs_emit()
ALSA: core: Replace scnprintf() with sysfs_emit()
ALSA: control-led: Replace sprintf() with sysfs_emit()
ALSA: aoa: Replace sprintf() with sysfs_emit()
ALSA: ac97: Replace sprintf() with sysfs_emit()
ALSA: hda/realtek: Add quirk for Clevo NV45PZ
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
ALSA: control: Use deferred fasync helper
ALSA: pcm: Use deferred fasync helper
ALSA: timer: Use deferred fasync helper
ALSA: core: Add async signal helpers
ASoC: q6asm: use kcalloc() instead of kzalloc()
ACPI: scan: Add CLSA0101 Laptop Support
ALSA: hda: cs35l41: Support CLSA0101
ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
ASoC: dt-bindings: use spi-peripheral-props.yaml
ASoC: codecs: va-macro: use fsgen as clock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Enable mirrored memory for arm64
- Fix up several abuses of the efivar API
- Refactor the efivar API in preparation for moving the 'business
logic' part of it into efivarfs
- Enable ACPI PRM on arm64
* tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
ACPI: Move PRM config option under the main ACPI config
ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64
ACPI: PRM: Change handler_addr type to void pointer
efi: Simplify arch_efi_call_virt() macro
drivers: fix typo in firmware/efi/memmap.c
efi: vars: Drop __efivar_entry_iter() helper which is no longer used
efi: vars: Use locking version to iterate over efivars linked lists
efi: pstore: Omit efivars caching EFI varstore access layer
efi: vars: Add thin wrapper around EFI get/set variable interface
efi: vars: Don't drop lock in the middle of efivar_init()
pstore: Add priv field to pstore_record for backend specific use
Input: applespi - avoid efivars API and invoke EFI services directly
selftests/kexec: remove broken EFI_VARS secure boot fallback check
brcmfmac: Switch to appropriate helper to load EFI variable contents
iwlwifi: Switch to proper EFI variable store interface
media: atomisp_gmin_platform: stop abusing efivar API
efi: efibc: avoid efivar API for setting variables
efi: avoid efivars layer when loading SSDTs from variables
efi: Correct comment on efi_memmap_alloc
memblock: Disable mirror feature if kernelcore is not specified
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of ACPI device objects to use the driver
core facilities for managing child ones instead of some questionable
home-grown ways without the requisite locking and reference counting,
clean up the EC driver, improve suspend-to-idle handling on x86, add
some systems to the ACPI backlight quirk list, fix some assorted
issues, clean up code and improve documentation.
Specifics:
- Use facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads
in struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc
bus driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
- Prepare the CPPC library for handling backwards-compatible future
_CPC return package formats gracefully (Rafael Wysocki).
- Clean up the ACPI EC driver after previous changes in it (Hans de
Goede).
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen
Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful
(Chuanhong Guo).
- Use native backlight on Dell Inspiron N4010 (Hans de Goede).
- Use native backlight on some TongFang devices (Werner Sembach).
- Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
Lu).
- Shorten the quirk list in the ACPI backlight driver by identifying
Clevo by board_name only (Werner Sembach).
- Remove useless NULL pointer checks from 2 ACPI PCI link management
functions (Andrey Strachuk).
- Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).
- Update links and references to _DSD-related documents (Sudeep
Holla)"
* tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (46 commits)
ACPI/PCI: Remove useless NULL pointer checks
ACPI: CPPC: Do not prevent CPPC from working in the future
ACPI: PM: x86: Print messages regarding LPS0 idle support
ACPI: resource: skip IRQ override on AMD Zen platforms
Documentation: ACPI: EINJ: Fix obsolete example
ACPI: video: Use native backlight on Dell Inspiron N4010
ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
ACPI: video: Force backlight native for some TongFang devices
ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
ACPI: VIOT: Fix ACS setup
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ACPI: LPSS: Fix missing check in register_device_clock()
ACPI: APEI: Better fix to avoid spamming the console with old error logs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v5.20
More updates that came in since the last pull request I sent, a series
of driver specific changes:
- Support for AMD RPL, some Intel platforms and Mediatek MT8186.
|
|
Merge ACPI backlight driver changes, ACPI changes related to PCI and
ACPI documentation changes for v5.20-rc1:
- Use native backlight on Dell Inspiron N4010 (Hans de Goede).
- Use native backlight on some TongFang devices (Werner Sembach).
- Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
Lu).
- Shorten the quirk list in the ACPI backlight driver by identifying
Clevo by board_name only (Werner Sembach).
- Remove useless NULL pointer checks from 2 ACPI PCI link management
functions (Andrey Strachuk).
- Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).
- Update links and references to _DSD-related documents (Sudeep Holla).
* acpi-video:
ACPI: video: Use native backlight on Dell Inspiron N4010
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
ACPI: video: Force backlight native for some TongFang devices
ACPI: video: Drop X86 dependency from Kconfig
* acpi-pci:
ACPI/PCI: Remove useless NULL pointer checks
* acpi-docs:
Documentation: ACPI: EINJ: Fix obsolete example
Documentation: ACPI: Update links and references to DSD related docs
|
|
Merge ACPI power management changes, ACPI LPSS driver changes, ACPI
table parsing code changes and ACPI resource handling changes for
v5.20-rc1:
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful (Chuanhong
Guo).
* acpi-pm:
ACPI: PM: x86: Print messages regarding LPS0 idle support
ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
ACPI: PM: save NVS memory for Lenovo G40-45
* acpi-soc:
ACPI: LPSS: Fix missing check in register_device_clock()
* acpi-tables:
ACPI: VIOT: Fix ACS setup
* acpi-resource:
ACPI: resource: skip IRQ override on AMD Zen platforms
|
|
Merge ACPI processor driver changes, APEI changes and ACPI EC driver
changes for v5.20-rc1:
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Clean up the ACPI EC driver after previous changes in it (Hans
de Goede).
* acpi-processor:
ACPI: processor: Drop leftover acpi_processor_get_limit_info() declaration
ACPI: processor: Split out thermal initialization from ACPI PSS
ACPI: processor/idle: Annotate more functions to live in cpuidle section
* acpi-apei:
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ACPI: APEI: Better fix to avoid spamming the console with old error logs
ACPI: APEI: Fix double word in a comment
* acpi-ec:
ACPI: EC: Drop unused ident initializers from dmi_system_id tables
ACPI: EC: Re-use boot_ec when possible even when EC_FLAGS_TRUST_DSDT_GPE is set
ACPI: EC: Drop the EC_FLAGS_IGNORE_DSDT_GPE quirk
ACPI: EC: Remove duplicate ThinkPad X1 Carbon 6th entry from DMI quirks
|
|
Merge ACPI device object management changes for v5.20-rc1.
- Use the facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads in
struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc bus
driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
* acpi-bus:
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
mfd: core: Use acpi_dev_for_each_child()
ACPI / MMC: PM: Unify fixing up device power
soundwire: Use acpi_dev_for_each_child()
platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child()
ACPI: scan: Walk ACPI device's children using driver core
ACPI: bus: Introduce acpi_dev_for_each_child_reverse()
ACPI: video: Use acpi_dev_for_each_child()
ACPI: bus: Export acpi_dev_for_each_child() to modules
ACPI: property: Use acpi_dev_for_each_child() for child lookup
ACPI: container: Use acpi_dev_for_each_child()
USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr()
thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_dev_has_children()
ACPI: glue: Use acpi_dev_for_each_child()
|
|
'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
If CONFIG_ACPI_IORT=y and CONFIG_IOMMU_API is not set,
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-,
will be failed, like this:
drivers/acpi/arm64/iort.c: In function ‘iort_get_rmr_sids’:
drivers/acpi/arm64/iort.c:1406:2: error: implicit declaration of function ‘iort_iommu_rmr_get_resv_regions’; did you mean ‘iort_iommu_get_resv_regions’? [-Werror=implicit-function-declaration]
iort_iommu_rmr_get_resv_regions(iommu_fwnode, NULL, head);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
iort_iommu_get_resv_regions
cc1: some warnings being treated as errors
make[3]: *** [drivers/acpi/arm64/iort.o] Error 1
The function iort_iommu_rmr_get_resv_regions()
is declared under CONFIG_IOMMU_API,
and the callers of iort_get_rmr_sids() and iort_put_rmr_sids()
would select IOMMU_API.
To fix this error, move the definitions to #ifdef CONFIG_IOMMU_API.
Fixes: e302eea8f497 ("ACPI/IORT: Add a helper to retrieve RMR info directly")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20220726033520.47865-1-renzhijie2@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add CLSA0101 id to the ignore_serial_bus_ids
so serial-multi-instantiate can correctly
instantiate the driver.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220727095924.80884-4-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Local variable 'p' is initialized by an address of field of acpi_resource,
so it does not make sense to compare 'p' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of adding a new property type, read buffer properties as integers.
Even though the internal representation in ACPI is different, the data
type is the same (byte) than on 8-bit integers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add support for newly added buffer property UUID, as defined in the DSD
guide section 3.3 [1]
Link: https://github.com/UEFI/DSD-Guide/blob/main/src/dsd-guide.adoc#buffer-data-extension-uuid # [1]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Unify functions reading ACPI property integer values into a single macro
using C99 _Generic().
Also use size_t for the counter instead of int.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
__acpi_node_get_property_reference() uses a series of if () statements for
testing the same variable. There's soon going to be one more value to be
tested.
Switch to use switch() instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Split out property reference argument parsing out of the
__acpi_node_get_property_reference() function into a new one,
acpi_get_ref_args(). The new function will be needed also for parsing
string references soon.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The type of union acpi_object field type is acpi_object_type. Use that
instead of int.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
