summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2023-01-27driver core: make struct bus_type.uevent() take a const *Greg Kroah-Hartman
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-27driver core: make struct device_type.uevent() take a const *Greg Kroah-Hartman
The uevent() callback in struct device_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bard Liao <yung-chuan.liao@linux.intel.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jilin Yuan <yuanjilin@cdjrlc.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: Mark Gross <markgross@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Maximilian Luz <luzmaximilian@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Cc: Sean Young <sean@mess.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Won Chung <wonchung@google.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for Thunderbolt Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25ACPI: NFIT: fix a potential deadlock during NFIT teardownVishal Verma
Lockdep reports that acpi_nfit_shutdown() may deadlock against an opportune acpi_nfit_scrub(). acpi_nfit_scrub () is run from inside a 'work' and therefore has already acquired workqueue-internal locks. It also acquiires acpi_desc->init_mutex. acpi_nfit_shutdown() first acquires init_mutex, and was subsequently attempting to cancel any pending workqueue items. This reversed locking order causes a potential deadlock: ====================================================== WARNING: possible circular locking dependency detected 6.2.0-rc3 #116 Tainted: G O N ------------------------------------------------------ libndctl/1958 is trying to acquire lock: ffff888129b461c0 ((work_completion)(&(&acpi_desc->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x43/0x450 but task is already holding lock: ffff888129b460e8 (&acpi_desc->init_mutex){+.+.}-{3:3}, at: acpi_nfit_shutdown+0x87/0xd0 [nfit] which lock already depends on the new lock. ... Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&acpi_desc->init_mutex); lock((work_completion)(&(&acpi_desc->dwork)->work)); lock(&acpi_desc->init_mutex); lock((work_completion)(&(&acpi_desc->dwork)->work)); *** DEADLOCK *** Since the workqueue manipulation is protected by its own internal locking, the cancellation of pending work doesn't need to be done under acpi_desc->init_mutex. Move cancel_delayed_work_sync() outside the init_mutex to fix the deadlock. Any work that starts after acpi_nfit_shutdown() drops the lock will see ARS_CANCEL, and the cancel_delayed_work_sync() will safely flush it out. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20230112-acpi_nfit_lockdep-v1-1-660be4dd10be@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-01-24ACPI: video: Fix apple gmux detectionHans de Goede
Some apple laptop models have an ACPI device with a HID of APP000B and that device has an IO resource (so it does not describe the new unsupported MMIO based gmux type), but there actually is no gmux in the laptop at all. The gmux_probe() function of the actual apple-gmux driver has code to detect this, this code has been factored out into a new apple_gmux_detect() helper in apple-gmux.h. Use this new function to fix acpi_video_get_backlight_type() wrongly returning apple_gmux as type on the following laptops: MacBookPro5,4 https://pastebin.com/8Xjq7RhS MacBookPro8,1 https://linux-hardware.org/?probe=e513cfbadb&log=dmesg MacBookPro9,2 https://bugzilla.kernel.org/attachment.cgi?id=278961 MacBookPro10,2 https://lkml.org/lkml/2014/9/22/657 MacBookPro11,2 https://forums.fedora-fr.org/viewtopic.php?id=70142 MacBookPro11,4 https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection") Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/ Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230124105754.62167-4-hdegoede@redhat.com
2023-01-24ACPI: Don't build ACPICA with '-Os'Mark Rutland
The ACPICA code has been built with '-Os' since the beginning of git history, though there's no explanatory comment as to why. This is unfortunate as GCC drops the alignment specificed by '-falign-functions=N' when '-Os' is used, as reported in GCC bug 88345: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345 This prevents CONFIG_FUNCTION_ALIGNMENT and CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B from having their expected effect on the ACPICA code. This is doubly unfortunate as in subsequent patches arm64 will depend upon CONFIG_FUNCTION_ALIGNMENT for its ftrace implementation. Drop the '-Os' flag when building the ACPICA code. With this removed, the code builds cleanly and works correctly in testing so far. I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y, building and booting a kernel using ACPI, and looking for misaligned text symbols: * arm64: Before, v6.2-rc3: # uname -rm 6.2.0-rc3 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 5009 Before, v6.2-rc3 + fixed __cold: # uname -rm 6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 919 After: # uname -rm 6.2.0-rc3-00002-g267bddc38572 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 323 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l 0 * x86_64: Before, v6.2-rc3: # uname -rm 6.2.0-rc3 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 11537 Before, v6.2-rc3 + fixed __cold: # uname -rm 6.2.0-rc3-00001-g2a2bedf8bfa9 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 2805 After: # uname -rm 6.2.0-rc3-00002-g267bddc38572 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 1357 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l 0 With the patch applied, the remaining unaligned text labels are a combination of static call trampolines and labels in assembly, which can be dealt with in subsequent patches. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Florent Revest <revest@chromium.org> Cc: Len Brown <lenb@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will@kernel.org> Cc: linux-acpi@vger.kernel.org Link: https://lore.kernel.org/r/20230123134603.1064407-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-01-23ACPI: video: Add backlight=native DMI quirk for Asus U46EHans de Goede
The Asus U46E backlight tables have a set of interesting problems: 1. Its ACPI tables do make _OSI ("Windows 2012") checks, so acpi_osi_is_win8() should return true. But the tables have 2 sets of _OSI calls, one from the usual global _INI method setting a global OSYS variable and a second set of _OSI calls from a MSOS method and the MSOS method is the only one calling _OSI ("Windows 2012"). The MSOS method only gets called in the following cases: 1. From some Asus specific WMI methods 2. From _DOD, which only runs after acpi_video_get_backlight_type() has already been called by the i915 driver 3. From other ACPI video bus methods which never run (see below) 4. From some EC query callbacks So when i915 calls acpi_video_get_backlight_type() MSOS has never run and acpi_osi_is_win8() returns false, so acpi_video_get_backlight_type() returns acpi_video as the desired backlight type, which causes the intel_backlight device to not register. 2. _DOD effectively does this: Return (Package (0x01) { 0x0400 }) causing acpi_video_device_in_dod() to return false, which causes the acpi_video backlight device to not register. Leaving the user with no backlight device at all. Note that before 6.1.y the i915 driver would register the intel_backlight device unconditionally and since that then was the only backlight device userspace would use that. Add a backlight=native DMI quirk for this special laptop to restore the old (and working) behavior of the intel_backlight device registering. Fixes: fb1836c91317 ("ACPI: video: Prefer native over vendor") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-23ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460pHans de Goede
The HP EliteBook 8460p predates Windows 8, so it defaults to using acpi_video# for backlight control. Starting with the 6.1.y kernels the native radeon_bl0 backlight is hidden in this case instead of relying on userspace preferring acpi_video# over native backlight devices. It turns out that for the acpi_video# interface to work on the HP EliteBook 8460p, the brightness needs to be set at least once through the native interface, which now no longer is done breaking backlight control. The native interface however always works without problems, so add a quirk to use native backlight on the EliteBook 8460p to fix this. Fixes: fb1836c91317 ("ACPI: video: Prefer native over vendor") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2161428 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-23ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nrHans de Goede
The HP Pavilion g6-1d80nr predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-22Merge 6.2-rc5 into driver-core-nextGreg Kroah-Hartman
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20Merge branches 'acpi-prm' and 'acpi-video'Rafael J. Wysocki
Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight quirk for 6.2-rc5: - Check whether EFI runtime is available when registering the ACPI PRM address space handler and when running it (Ard Biesheuvel). - Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI video driver (Hans de Goede). * acpi-prm: ACPI: PRM: Check whether EFI runtime is available * acpi-video: ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
2023-01-20Merge tag 'archtopo-cacheinfo-updates-6.3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next Sudeep writes: "cacheinfo and arch_topology updates for v6.3 The main change is to build the cache topology information for all the CPUs from the primary CPU. Currently the cacheinfo for secondary CPUs is created during the early boot on the respective CPU itself. Preemption and interrupts are disabled at this stage. On PREEMPT_RT kernels, allocating memory and even parsing the PPTT table for ACPI based systems triggers a: 'BUG: sleeping function called from invalid context' To prevent this bug, the cacheinfo is now allocated from the primary CPU when preemption and interrupts are enabled and before booting secondary CPUs. The cache levels/leaves are computed from DT/ACPI PPTT information only, without relying on any architecture specific mechanism if done so early. The other minor change included here is to handle shared caches at different levels when not all the CPUs on the system have the same cache hierarchy." * tag 'archtopo-cacheinfo-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels arch_topology: Build cacheinfo from primary CPU ACPI: PPTT: Update acpi_find_last_cache_level() to acpi_get_cache_info() ACPI: PPTT: Remove acpi_find_cache_levels() cacheinfo: Check 'cache-unified' property to count cache leaves cacheinfo: Return error code in init_of_cache_level() cacheinfo: Use RISC-V's init_cache_level() as generic OF implementation
2023-01-19acpi: Fix suspend with Xen PVJuergen Gross
Commit f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") missed one code path accessing real_mode_header, leading to dereferencing NULL when suspending the system under Xen: [ 348.284004] PM: suspend entry (deep) [ 348.289532] Filesystems sync: 0.005 seconds [ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 348.292457] OOM killer disabled. [ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug) [ 348.749228] PM: suspend devices took 0.352 seconds [ 348.769713] ACPI: EC: interrupt blocked [ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 348.816080] #PF: supervisor read access in kernel mode [ 348.816081] #PF: error_code(0x0000) - not-present page [ 348.816083] PGD 0 P4D 0 [ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1 [ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022 [ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20 Fix that by adding an optional acpi callback allowing to skip setting the wakeup address, as in the Xen PV case this will be handled by the hypervisor anyway. Fixes: f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/20230117155724.22940-1-jgross%40suse.com
2023-01-18ACPI: battery: Fix missing NUL-termination with large stringsArmin Wolf
When encountering a string bigger than the destination buffer (32 bytes), the string is not properly NUL-terminated, causing buffer overreads later. This for example happens on the Inspiron 3505, where the battery model name is larger than 32 bytes, which leads to sysfs showing the model name together with the serial number string (which is NUL-terminated and thus prevents worse). Fix this by using strscpy() which ensures that the result is always NUL-terminated. Fixes: 106449e870b3 ("ACPI: Battery: Allow extract string from integer") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-18ACPI: PRM: Check whether EFI runtime is availableArd Biesheuvel
The ACPI PRM address space handler calls efi_call_virt_pointer() to execute PRM firmware code, but doing so is only permitted when the EFI runtime environment is available. Otherwise, such calls are guaranteed to result in a crash, and must therefore be avoided. Given that the EFI runtime services may become unavailable after a crash occurring in the firmware, we need to check this each time the PRM address space handler is invoked. If the EFI runtime services were not available at registration time to being with, don't install the address space handler at all. Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-18ACPI: PPTT: Update acpi_find_last_cache_level() to acpi_get_cache_info()Pierre Gondois
acpi_find_last_cache_level() allows to find the last level of cache for a given CPU. The function is only called on arm64 ACPI based platforms to check for cache information that would be missing in the CLIDR_EL1 register. To allow populating (struct cpu_cacheinfo).num_leaves by only parsing a PPTT, update acpi_find_last_cache_level() to get the 'split_levels', i.e. the number of cache levels being split in data/instruction caches. It is assumed that there will not be data/instruction caches above a unified cache. If a split level consist of one data cache and no instruction cache (or opposite), then the missing cache will still be populated by default with minimal cache information, and maximal cpumask (all non-existing caches have the same fw_token). Suggested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230104183033.755668-6-pierre.gondois@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-01-18ACPI: PPTT: Remove acpi_find_cache_levels()Pierre Gondois
acpi_find_cache_levels() is used at a single place and is short enough to be merged into the calling function. The removal allows an easier renaming of the calling function in the next patch. Also reorder the local variables in the 'reversed Christmas tree' order. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230104183033.755668-5-pierre.gondois@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-01-17ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810THans de Goede
The Acer Aspire 4810T predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-17ACPI: PNP: Introduce list of known non-PNP devicesRafael J. Wysocki
In some cases, PNP device IDs from acpi_pnp_device_ids[] are returned by _CID for devices for which matching platform drivers are present in the kernel and should be bound to them. However, the IDs coming from _CID cause the PNP scan handler to attach to those devices which prevents platform device objects from being created for them. Address this by introducing a list of known non-PNP device IDs into acpi_pnp.c such that if a device ID is there in that list, it cannot be attached to by the PNP scan handler and add the platform runtime update and telemetry device IDs to that list to start with. Reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Zhang Yang <Yang5.zhang@intel.com>
2023-01-13PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3()Rafael J. Wysocki
It is questionable to allow a PCI bridge to go into D3 if it has _S0W returning D2 or a shallower power state, so modify acpi_pci_bridge_d3(() to always take the return value of _S0W for the target bridge into account. That is, make it return 'false' if _S0W returns D2 or a shallower power state for the target bridge regardless of its ancestor Root Port properties. Of course, this also causes 'false' to be returned if the Root Port itself is the target and its _S0W returns D2 or a shallower power state. However, still allow bridges without _S0W that are power-manageable via ACPI to enter D3 to retain the current code behavior in that case. This fixes problems where a hotplug notification is missed because a bridge is in D3. That means hot-added devices such as USB4 docks (and the devices they contain) and Thunderbolt 3 devices may not work. Link: https://lore.kernel.org/linux-pci/20221031223356.32570-1-mario.limonciello@amd.com/ Link: https://lore.kernel.org/r/12155458.O9o76ZdvQC@kreacher Reported-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-01-13cpuidle, ACPI: Make noinstr cleanPeter Zijlstra
objtool found cases where ACPI methods called out into instrumentation code: vmlinux.o: warning: objtool: io_idle+0xc: call to __inb.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_idle_enter+0xfe: call to num_online_cpus() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_idle_enter+0x115: call to acpi_idle_fallback_to_c1.isra.0() leaves .noinstr.text section Fix this by: marking the IO in/out, acpi_idle_fallback_to_c1() and num_online_cpus() methods as __always_inline. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195541.294846301@infradead.org
2023-01-13acpi_idle: Remove tracingPeter Zijlstra
All the idle routines are called with RCU disabled, as such there must not be any tracing inside. While there; clean-up the io-port idle thing. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.251666856@infradead.org
2023-01-13cpuidle: Fix ct_idle_*() usagePeter Zijlstra
The whole disable-RCU, enable-IRQS dance is very intricate since changing IRQ state is traced, which depends on RCU. Add two helpers for the cpuidle case that mirror the entry code: ct_cpuidle_enter() ct_cpuidle_exit() And fix all the cases where the enter/exit dance was buggy. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.130014793@infradead.org
2023-01-13cpuidle, dt: Push RCU-idle into driverPeter Zijlstra
Doing RCU-idle outside the driver, only to then temporarily enable it again before going idle is suboptimal. Notably: this converts all dt_init_idle_driver() and __CPU_PM_CPU_IDLE_ENTER() users for they are inextrably intertwined. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.068981667@infradead.org
2023-01-13Merge branches 'acpi-resource' and 'acpi-video'Rafael J. Wysocki
Merge an ACPI resource management quirk and an ACPI backlight driver fix for 6.2-rc4: - Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan). - Add missing support for manual selection of NVidia-WMI-EC or Apple GMUX backlight in the kernel command line to the ACPI backlight driver (Hans de Goede). * acpi-resource: ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA * acpi-video: ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
2023-01-10ACPI: Fix selecting wrong ACPI fwnode for the iGPU on some Dell laptopsHans de Goede
The Dell Latitude E6430 both with and without the optional NVidia dGPU has a bug in its ACPI tables which is causing Linux to assign the wrong ACPI fwnode / companion to the pci_device for the i915 iGPU. Specifically under the PCI root bridge there are these 2 ACPI Device()s : Scope (_SB.PCI0) { Device (GFX0) { Name (_ADR, 0x00020000) // _ADR: Address } ... Device (VID) { Name (_ADR, 0x00020000) // _ADR: Address ... Method (_DOS, 1, NotSerialized) // _DOS: Disable Output Switching { VDP8 = Arg0 VDP1 (One, VDP8) } Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices { ... } ... } } The non-functional GFX0 ACPI device is a problem, because this gets returned as ACPI companion-device by acpi_find_child_device() for the iGPU. This is a long standing problem and the i915 driver does use the ACPI companion for some things, but works fine without it. However since commit 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()") acpi_get_pci_dev() relies on the physical-node pointer in the acpi_device and that is set on the wrong acpi_device because of the wrong acpi_find_child_device() return. This breaks the ACPI video code, leading to non working backlight control in some cases. Add a type.backlight flag, mark ACPI video bus devices with this and make find_child_checks() return a higher score for children with this flag set, so that it picks the right companion-device. Fixes: 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()") Co-developed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: 6.1+ <stable@vger.kernel.org> # 6.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-10ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the ↵Hans de Goede
cmdline The patches adding NVidia-WMI-EC and Apple GMUX backlight detection support to acpi_video_get_backlight_type(), forgot to update acpi_video_parse_cmdline() to allow manually selecting these from the commandline. Add support for these to acpi_video_parse_cmdline(). Fixes: fe7aebb40d42 ("ACPI: video: Add Nvidia WMI EC brightness control detection (v3)") Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-10ACPICA: nsrepair: handle cases without a return value correctlyDaniil Tatianin
Previously acpi_ns_simple_repair() would crash if expected_btypes contained any combination of ACPI_RTYPE_NONE with a different type, e.g | ACPI_RTYPE_INTEGER because of slightly incorrect logic in the !return_object branch, which wouldn't return AE_AML_NO_RETURN_VALUE for such cases. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Link: https://github.com/acpica/acpica/pull/811 Fixes: 61db45ca2163 ("ACPICA: Restore code that repairs NULL package elements in return values.") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-10ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBATamim Khan
Like the Asus Expertbook B2502CBA and various Asus Vivobook laptops, the Asus Expertbook B2402CBA has an ACPI DSDT table that describes IRQ 1 as ActiveLow while the kernel overrides it to Edge_High. This prevents the keyboard from working. To fix this issue, add this laptop to the skip_override_table so that the kernel does not override IRQ 1. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216864 Tested-by: zelenat <zelenat@gmail.com> Signed-off-by: Tamim Khan <tamim@fusetak.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-05PCI/CXL: Export native CXL error reporting controlIra Weiny
CXL _OSC Error Reporting Control is used by the OS to determine if Firmware has control of various CXL error reporting capabilities including the event logs. Expose the result of negotiating CXL Error Reporting Control in struct pci_host_bridge for consumption by the CXL drivers. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: linux-pci@vger.kernel.org Cc: linux-acpi@vger.kernel.org Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20221212070627.1372402-2-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-30Merge tag 'acpi-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix) support adjustments and ACPI backlight handling fixes, mostly for platforms using AMD chips. Specifics: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865 and stop using AMD-specific low-power S0 idle code path for systems with Rembrandt chips and newer (Mario Limonciello)" * tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+ ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865 ACPI: video: Fix Apple GMUX backlight detection ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
2022-12-30ACPI: Silence missing prototype warningsAmmar Faizi
Compiling with clang-16: drivers/acpi/acpi_lpit.c:142:6: error: no previous prototype \ for function 'acpi_init_lpit' [-Werror,-Wmissing-prototypes] drivers/acpi/ioapic.c:212:6: error: no previous prototype \ for function 'pci_ioapic_remove' [-Werror,-Wmissing-prototypes] drivers/acpi/ioapic.c:229:5: error: no previous prototype \ for function 'acpi_ioapic_remove' [-Werror,-Wmissing-prototypes] Include "internal.h" to silence them. Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30ACPI: processor: perflib: Avoid updating frequency QoS unnecessarilyRafael J. Wysocki
Modify acpi_processor_get_platform_limit() to avoid updating its frequency QoS request when the _PPC return value has not changed by comparing that value to the previous _PPC return value stored in the performance_platform_limit field of the struct acpi_processor corresponding to the given CPU. While at it, do the _PPC return value check against the state count earlier, to avoid setting performance_platform_limit to an invalid value, and make acpi_processor_ppc_init() use FREQ_QOS_MAX_DEFAULT_VALUE as the "no limit" frequency QoS for consistency. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30ACPI: processor: perflib: Use the "no limit" frequency QoSRafael J. Wysocki
When _PPC returns 0, it means that the CPU frequency is not limited by the platform firmware, so make acpi_processor_get_platform_limit() update the frequency QoS request used by it to "no limit" in that case. This addresses a problem with limiting CPU frequency artificially on some systems after CPU offline/online to the frequency that corresponds to the first entry in the _PSS return package. Reported-by: Pratyush Yadav <ptyadav@amazon.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Pratyush Yadav <ptyadav@amazon.de> Tested-by: Pratyush Yadav <ptyadav@amazon.de>
2022-12-30ACPI: processor: idle: Drop unnecessary (void *) conversionZhou jie
The (void *) type pointer does not need to be cast, so don't do that in lapic_timer_check_state(). Signed-off-by: Zhou jie <zhoujie@nfschina.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30ACPICA: Constify pathname argument for acpi_get_handle()Sakari Ailus
acpi_get_handle() uses the pathname argument to find a handle related to that pathname but it does not need to modify it. Make it const, in order to be able to pass const pathname to it. Link: https://github.com/acpica/acpica/pull/773 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30ACPICA: Drop port I/O validation for some regionsMario Limonciello
Microsoft introduced support in Windows XP for blocking port I/O to various regions. For Windows compatibility ACPICA has adopted the same protections and will disallow writes to those (presumably) the same regions. On some systems the AML included with the firmware will issue 4 byte long writes to 0x80. These writes aren't making it over because of this blockage. The first 4 byte write attempt is rejected, and then subsequently 1 byte at a time each offset is tried. The first at 0x80 works, but then the next 3 bytes are rejected. This manifests in bizarre failures for devices that expected the AML to write all 4 bytes. Trying the same AML on Windows 10 or 11 doesn't hit this failure and all 4 bytes are written. Either some of these regions were wrong or some point after Windows XP some of these regions blocks have been lifted. In the last 15 years there doesn't seem to be any reports popping up of this error in the Windows event viewer anymore. There is no documentation at Microsoft's developer site indicating that Windows ACPI interpreter blocks these regions. Between the lack of documentation and the fact that the writes actually do work in Windows 10 and 11, it's quite likely Windows doesn't actually enforce this anymore. So to help the issue, only enforce Windows XP specific entries if the latest _OSI supported is Windows XP. Continue to enforce the ALWAYS_ILLEGAL entries. Link: https://github.com/acpica/acpica/pull/817 Fixes: 7f0719039085 ("ACPICA: New: I/O port protection") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30ACPI: PMIC: Add pmic_i2c_address to BYT Crystal Cove supportHans de Goede
Add a pmic_i2c_address entry to intel_pmic_bytcrc.c, so that intel_soc_pmic_exec_mipi_pmic_seq_element() can be used on devices with a Bay Trail Crystal Cove PMIC OpRegion driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30ACPI: tables: Add support for NBFTStuart Hayes
Add support for the NVMe Boot Firmware Table (NBFT) to facilitate booting from NVM Express namespaces which are accessed via NVMe over Fabrics (NVMe-oF). Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30Merge branches 'acpi-resource' and 'acpi-video'Rafael J. Wysocki
Merge ACPI resource handling quirks and ACPI backlight handling fixes for 6.2-rc2: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). * acpi-resource: ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 * acpi-video: ACPI: video: Fix Apple GMUX backlight detection ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-22ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+Mario Limonciello
After we introduced a module parameter and quirk infrastructure for picking the Microsoft GUID over the SOC vendor GUID we discovered that lots and lots of systems are getting this wrong. The table continues to grow, and is becoming unwieldy. We don't really have any benefit to forcing vendors to populate the AMD GUID. This is just extra work, and more and more vendors seem to mess it up. As the Microsoft GUID is used by Windows as well, it's very likely that it won't be messed up like this. So drop all the quirks forcing it and the Rembrandt behavior. This means that Cezanne or later effectively only run the Microsoft GUID codepath with the exception of HP Elitebook 8*5 G9. Fixes: fd894f05cf30 ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt") Cc: stable@vger.kernel.org # 6.1 Reported-by: Benjamin Cheng <ben@bcheng.me> Reported-by: bilkow@tutanota.com Reported-by: Paul <paul@zogpog.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2292 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216768 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com> Tested-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-22ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865Mario Limonciello
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft GUID with _REV 0. Both have very similar code but the AMD GUID has a special workaround that is specific to a problem with spurious wakeups on systems with Qualcomm WLAN. This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't affect any other WLAN H/W). If this WLAN firmware is fixed this quirk can be dropped. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-22ACPI: video: Fix Apple GMUX backlight detectionHans de Goede
The apple-gmux driver only binds to old GMUX devices which have an IORESOURCE_IO resource (using inb()/outb()) rather then memory-mapped IO (IORESOURCE_MEM). T2 MacBooks use the new style GMUX devices (with IORESOURCE_MEM access), so these are not supported by the apple-gmux driver. This is not a problem since they have working ACPI video backlight support. But the apple_gmux_present() helper only checks if an ACPI device with the "APP000B" HID is present, causing acpi_video_get_backlight_type() to return acpi_backlight_apple_gmux disabling the acpi_video backlight device. Add a new apple_gmux_backlight_present() helper which checks that the "APP000B" device actually is an old GMUX device with an IORESOURCE_IO resource. This fixes the acpi_video0 backlight no longer registering on T2 MacBooks. Note people are working to add support for the new style GMUX to Linux: https://github.com/kekrby/linux-t2/commits/wip/hybrid-graphics Once this lands this patch should be reverted so that acpi_video_get_backlight_type() also prefers the gmux on new style GMUX MacBooks, but for now this is necessary to avoid regressing backlight control on T2 Macs. Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection") Reported-and-tested-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-22ACPI: resource: Add Asus ExpertBook B2502 to Asus quirksHans de Goede
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it should be Active_Low. This patch adds the ExpertBook B2502 model to the existing quirk list of Asus laptops with this issue. Fixes: b5f9223a105d ("ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142574 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-22ACPI: resource: do IRQ override on Lenovo 14ALC7Adrian Freund
Commit bfcdf58380b1 ("ACPI: resource: do IRQ override on LENOVO IdeaPad") added an override for Lenovo IdeaPad 5 16ALC7. The 14ALC7 variant also suffers from a broken touchscreen and trackpad. Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216804 Signed-off-by: Adrian Freund <adrian@freund.io> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-22ACPI: resource: do IRQ override on XMG Core 15Erik Schumacher
The Schenker XMG CORE 15 (M22) is Ryzen-6 based and needs IRQ overriding for the keyboard to work. Adding an entry for this laptop to the override_table makes the internal keyboard functional again. Signed-off-by: Erik Schumacher <ofenfisch@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-22ACPI: video: Don't enable fallback path for creating ACPI backlight by defaultMario Limonciello
The ACPI video detection code has a module parameter `register_backlight_delay` which is currently configured to 8 seconds. This means that if after 8 seconds of booting no native driver has created a backlight device then the code will attempt to make an ACPI video backlight device. This was intended as a safety mechanism with the backlight overhaul that occurred in kernel 6.1, but as it doesn't appear necesssary set it to be disabled by default. Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-22ACPI: video: Allow GPU drivers to report no panelsMario Limonciello
The current logic for the ACPI backlight detection will create a backlight device if no native or vendor drivers have created 8 seconds after the system has booted if the ACPI tables included backlight control methods. If the GPU drivers have loaded, they may be able to report whether any LCD panels were found. Allow using this information to factor in whether to enable the fallback logic for making an acpi_video0 backlight device. Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-15Merge tag 'acpi-6.2-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These fix an AML byte code execution issue in ACPICA and two issues in the ACPI EC driver which requires rearranging ACPICA code. Specifics: - Avoid trying to resolve operands in AML when there are none (Amadeusz Sławiński) - Fix indentation in include/acpi/acpixf.h to help applying patches from the upstream ACPICA git (Hans de Goede) - Make it possible to install an address space handler without evaluating _REG for Operation Regions in the given address space (Hans de Goede) - Defer the evaluation of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() gets called for it (Hans de Goede) - Fix EC address space handler unregistration (Hans de Goede)" * tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: Fix ECDT probe ordering issues ACPI: EC: Fix EC address space handler unregistration ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps ACPICA: include/acpi/acpixf.h: Fix indentation ACPICA: Fix operand resolution
2022-12-15Merge branch 'acpi-ec'Rafael J. Wysocki
Merge additional ACPI EC driver fixes for 6.2-rc1: - Fix EC address space handler unregistration (Hans de Goede). - Defer the evaluation of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() gets called for it (Hans de Goede). * acpi-ec: ACPI: EC: Fix ECDT probe ordering issues ACPI: EC: Fix EC address space handler unregistration
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 11:10:08 +0000