| Age | Commit message (Collapse) | Author |
|---|
|
It removes the need to check the resource data type
separately.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It removes the need to check the resource data type
separately.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Wrapper function that finds all memory type resources by
using acpi_dev_get_resources(). It removes the need for the
drivers to check the resource data type separately.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This will generalise the function so it should become
useful in more places.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table
which contains invalid physical addresses, with high bits set which fall
outside the range of the CPU-s supported physical address range.
Calling acpi_os_map_memory() on such an invalid phys address leads to
the below WARN_ON in ioremap triggering resulting in an oops/stacktrace.
Add code to verify the physical address before calling acpi_os_map_memory()
to fix / avoid the oops.
[ 1.226900] ioremap: invalid physical address 3001000000000000
[ 1.226949] ------------[ cut here ]------------
[ 1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f
[ 1.226996] Modules linked in:
[ 1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490
[ 1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[ 1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f
[ 1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00
[ 1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286
[ 1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000
[ 1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff
[ 1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18
[ 1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008
[ 1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000
[ 1.227135] FS: 0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000
[ 1.227146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0
[ 1.227167] Call Trace:
[ 1.227176] <TASK>
[ 1.227185] ? acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227215] ? kmem_cache_alloc_trace+0x187/0x370
[ 1.227254] acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227288] acpi_init_fpdt+0xa8/0x253
[ 1.227308] ? acpi_debugfs_init+0x1f/0x1f
[ 1.227339] do_one_initcall+0x5a/0x300
[ 1.227406] ? rcu_read_lock_sched_held+0x3f/0x80
[ 1.227442] kernel_init_freeable+0x28b/0x2cc
[ 1.227512] ? rest_init+0x170/0x170
[ 1.227538] kernel_init+0x16/0x140
[ 1.227552] ret_from_fork+0x1f/0x30
[ 1.227639] </TASK>
[ 1.227647] irq event stamp: 186819
[ 1.227656] hardirqs last enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70
[ 1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70
[ 1.227686] softirqs last enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227715] ---[ end trace 0000000000000000 ]---
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some Toshibas have a broken acpi-video interface for brightness control
and need a special firmware call on resume to turn the panel back on.
So far these have been using the disable_backlight_sysfs_if workaround
to deal with this.
The recent x86/acpi backlight refactoring has broken this workaround:
1. This workaround relies on acpi_video_get_backlight_type() returning
acpi_video so that the acpi_video code actually runs; and
2. this relies on the actual native GPU driver to offer the sysfs
backlight interface to userspace.
After the refactor this breaks since the native driver will no
longer register its backlight-device if acpi_video_get_backlight_type()
does not return native and making it return native breaks 1.
Keeping the acpi_video backlight handling on resume active, while not
using it to set the brightness, is necessary because it does a _BCM
call on resume which is necessary to turn the panel back on on resume.
Looking at the DSDT shows that this _BCM call results in a Toshiba
HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.
This kind of special vendor specific handling really belongs in
the vendor specific acpi driver. An earlier patch in this series
modifies toshiba_acpi to make the necessary HCI_SET call on resume
on affected models.
With toshiba_acpi taking care of the HCI_SET call on resume,
the acpi_video code no longer needs to call _BCM on resume.
So instead of using the (now broken) disable_backlight_sysfs_if
workaround, simply setting acpi_backlight=native to disable
the broken apci-video interface is sufficient fix things now.
After this there are no more users of the disable_backlight_sysfs_if
flag and as discussed above the flag also no longer works as intended,
so remove the disable_backlight_sysfs_if flag entirely.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On some platforms it is found that Linux more aggressively enters s2idle
than Windows enters Modern Standby and this uncovers some synchronization
issues for the platform. To aid in debugging this class of problems in
the future, add support for an extra optional callback intended for
drivers to emit extra debugging.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220829162953.5947-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Now that dma-iommu.h only contains internal interfaces, make it
private to the IOMMU subsytem.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b237e06c56a101f77af142a54b629b27aa179d22.1660668998.git.robin.murphy@arm.com
[ joro : re-add stub for iommu_dma_get_resv_regions ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Rafael explained that the reason for having both PF_NOFREEZE and
PF_FREEZER_SKIP is that {,un}lock_system_sleep() is callable from
kthread context that has previously called set_freezable().
In preparation of merging the flags, have {,un}lock_system_slee() save
and restore current->flags.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.725003428@infradead.org
|
|
Silence an annoying message emitted for W=1 builds:
drivers/acpi/x86/apple.c:30:6: warning: no previous declaration for 'acpi_extract_apple_properties' [-Wmissing-declarations]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of hardcoding the value for the id, use PLATFORM_DEVID_NONE.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For easier maintenance, sort the forbidden_id_list[] table rows in
ascending order with respect to the device ID field.
While at it, use an empty row as the list terminator, which is more
usual in the kernel.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is preferred to use sizeof(*pointer) instead of sizeof(type).
The type of the variable can change and one needs not change
the former (unlike the latter). No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We rely on somebody else to print enough information on memory
allocation failures. So remove the log in
the acpi_create_platform_device() when return -ENOMEM.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the snippets like the following
if (...)
return / goto / break / continue ...;
else
...
the 'else' is redundant. Get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After introducing acpi_dev_parent() in commit 62fcb99bdf10 ("ACPI: Drop
parent field from struct acpi_device"), it is better to use it instead
of accessing the dev.parent field in struct acpi_device directly.
Modify acpi_node_get_parent() accordingly.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
With temporary variables for OF and ACPI IDs, it's easier to read
the code. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The description for acpi_bus_notify() is quite far from what
kernel doc expects. It complains about this:
Function parameter or member 'handle' not described in 'acpi_bus_notify'
Function parameter or member 'type' not described in 'acpi_bus_notify'
Function parameter or member 'data' not described in 'acpi_bus_notify'
Fix this by dropping kernel doc annotation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Return the acpi_ec_write() return value directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Toshiba Satellite Z830 needs the quirk video_disable_backlight_sysfs_if
for proper backlight control after suspend/resume cycles.
Toshiba Portege Z830 is simply the same laptop rebranded for certain
markets (I looked through the manual to other language sections to confirm
this) and thus also needs this quirk.
Thanks to Hans de Goede for suggesting this fix.
Link: https://www.spinics.net/lists/platform-driver-x86/msg34394.html
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Print total number of records found during BERT log parsing.
This also simplify dmesg parser implementation for BERT events.
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The video_detect_dmi_table[] uses an unusual indentation for
before the ".name = ..." named struct initializers.
Instead of being indented with an extra tab compared to
the previous line's '{' these are indented to with only
a single space to allow for long DMI_MATCH() lines without
wrapping.
But over time some entries did not event have the single space
indent in front of the ".name = ..." lines.
Make things consistent by using a single space indent for these
lines everywhere.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_backlight=native is the default for these, but as the comment
explains the quirk was still necessary because even briefly registering
the acpi_video0 backlight; and then unregistering it once the native
driver showed up, was leading to issues.
After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.
So this is no longer an issue an the quirks are no longer needed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215683
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_backlight=native is the default for the "Samsung X360", but as
the comment explains the quirk was still necessary because even
briefly registering the acpi_video0 backlight; and then unregistering
it once the native driver showed up, was leading to issues.
After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.
So this is no longer an issue an the quirk is no longer needed.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_video_set_dmi_backlight_type() is troublesome because it may end
up getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
All callers have been fixed to no longer call it, so remove
acpi_video_set_dmi_backlight_type() now.
This means we now also no longer need acpi_video_unregister_backlight()
for the remove acpi_video backlight after it was wrongly registered hack,
so remove that too.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ACPI video_detect.c
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Move all the acpi_backlight=[vendor|native] quirks from samsung-laptop to
drivers/acpi/video_detect.c .
Note the X360 -> acpi_backlight=native quirk is not moved because that
already was present in drivers/acpi/video_detect.c .
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove the asus-wmi quirk_entry.wmi_backlight_native quirk-flag, which
called acpi_video_set_dmi_backlight_type(acpi_backlight_native) and replace
it with acpi/video_detect.c video_detect_dmi_table[] entries using the
video_detect_force_native callback.
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove the asus-wmi quirk_entry.wmi_backlight_power quirk-flag, which
called acpi_video_set_dmi_backlight_type(acpi_backlight_vendor) and replace
it with acpi/video_detect.c video_detect_dmi_table[] entries using the
video_detect_force_vendor callback.
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Note no entries are dropped from the dmi_system_id table in asus-nb-wmi.c.
This is because the entries using the removed wmi_backlight_power flag
also use other model specific quirks from the asus-wmi quirk_entry struct.
So the quirk_asus_x55u struct and the entries pointing to it cannot be
dropped.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move the backlight DMI quirks to acpi/video_detect.c, so that
the driver no longer needs to call acpi_video_set_dmi_backlight_type().
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Note that even though the DMI quirk table name was video_vendor_dmi_table,
5/6 quirks were actually quirks to use the GPU native backlight.
These 5 quirks also had a callback in their dmi_system_id entry which
disabled the acer-wmi vendor driver; and any DMI match resulted in:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
which disabled the acpi_video driver, so only the native driver was left.
The new entries for these 5/6 devices correctly marks these as needing
the native backlight driver.
Also note that other changes in this series change the native backlight
drivers to no longer unconditionally register their backlight. Instead
these drivers now do this check:
if (acpi_video_get_backlight_type(false) != acpi_backlight_native)
return 0; /* bail */
which without this patch would have broken these 5/6 "special" quirks.
Since I had to look at all the commits adding the quirks anyways, to make
sure that I understood the code correctly, I've also added links to
the various original bugzillas for these quirks to the new entries.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
In case of toshiba_acpi there are no DMI quirks to move to
acpi/video_detect.c, but it also (ab)uses it for transflective
displays. Adding transflective display support to video_detect.c would
be quite involved. But luckily there are only 2 known models with
a transflective display, so we can just add DMI quirks for those.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On Apple laptops with an Apple GMUX using this for brightness control,
should take precedence of any other brightness control methods.
Add apple-gmux detection to acpi_video_get_backlight_type() using
the already existing apple_gmux_present() helper function.
This will allow removig the (ab)use of:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
Inside the apple-gmux driver.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On some new laptop designs a new Nvidia specific WMI interface is present
which gives info about panel brightness control and may allow controlling
the brightness through this interface when the embedded controller is used
for brightness control.
When this WMI interface is present and indicates that the EC is used,
then this interface should be used for brightness control.
Changes in v2:
- Use the new shared nvidia-wmi-ec-backlight.h header for the
WMI firmware API definitions
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Changes in v3:
- Use WMI_BRIGHTNESS_GUID define
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Refactor acpi_video_get_backlight_type() so that the heuristics /
detection steps are stricly in order of descending precedence.
Also move the comments describing the steps to when the various steps are
actually done, to avoid the comments getting out of sync with the code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
backlight registers
Remove the code to unregister acpi_video backlight devices when
a native backlight device gets registered later.
Now that the acpi_video backlight device registration is a separate step
which runs later, after the drm/kms driver is done setting up its own
native backlight device, it is no longer necessary to monitor for a
native (BACKLIGHT_RAW) device showing up later and to then unregister
the acpi_video backlight device(s).
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On x86/ACPI boards the acpi_video driver will usually initialize before
the kms driver (except i915). This causes /sys/class/backlight/acpi_video0
to show up and then the kms driver registers its own native backlight
device after which the drivers/acpi/video_detect.c code unregisters
the acpi_video0 device (when acpi_video_get_backlight_type()==native).
This means that userspace briefly sees 2 devices and the disappearing of
acpi_video0 after a brief time confuses the systemd backlight level
save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this make backlight class device registration a separate step
done by a new acpi_video_register_backlight() function. The intend is for
this to be called by the drm/kms driver *after* it is done setting up its
own native backlight device. So that acpi_video_get_backlight_type() knows
if a native backlight will be available or not at acpi_video backlight
registration time, avoiding the add + remove dance.
Note the new acpi_video_register_backlight() function is also called from
a delayed work to ensure that the acpi_video backlight devices does get
registered if necessary even if there is no drm/kms driver or when it is
disabled.
Changes in v2:
- Make register_backlight_delay a module parameter, mainly so that it can
be disabled by Nvidia binary driver users
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When acpi_video_register() has not run yet the video_bus_head will be
empty, so there is no need to check the register_count flag first.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move the list_del removing an acpi_video_bus from video_bus_head
on teardown to before the teardown is done, to avoid code iterating
over the video_bus_head list seeing acpi_video_bus objects on there
which are (partly) torn down already.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_video_get_backlight_type()
All x86/ACPI kms drivers which register native/BACKLIGHT_RAW type
backlight devices call acpi_video_backlight_use_native() now. This sets
__acpi_video_get_backlight_type()'s internal static native_available flag.
This makes the backlight_device_get_by_type(BACKLIGHT_RAW) check
unnecessary.
Relying on the cached native_available value not only is simpler, it will
also work correctly in cases where then native backlight registration was
skipped because of acpi_video_backlight_use_native() returning false.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In principle, it should be valid to pass NULL as the ACPI device
pointer to acpi_device_get_power() and acpi_device_set_power() and they
both are expected to return -EINVAL in that case, but that has been
broken recently by commit 62fcb99bdf10 ("ACPI: Drop parent field from
struct acpi_device") which has caused the ACPI device pointer to be
dereferenced in these functions before the NULL check.
Fix that and while at it make acpi_device_set_power() only use the
parent field if the target ACPI device object's ignore_parent flag
in not set.
Fixes: 62fcb99bdf10 ("ACPI: Drop parent field from struct acpi_device")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-processor:
ACPI: processor: Remove freq Qos request for all CPUs
|
|
Return the value from driver_register() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
didn't handle mux control properly.
This was fixed by commit 8e55f99c510f ("drm/i915: Invoke another _DSM
to enable MUX on HP Workstation laptops"), so vendors shouldn't be
using this string to modify ASL any more.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
didn't handle HDMI properly.
This was fixed by commit b516ea586d71 ("PCI: Enable NVIDIA HDA
controllers"), so vendors shouldn't be using this string to modify
ASL any more.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
had bugs supporting RTD3 in the past.
Before proprietary NVIDIA driver started to support RTD3, Ubuntu had
had a mechanism for switching PRIME on and off, though it had required
to logout/login to make the library switch happen.
When the PRIME had been off, the mechanism had unloaded the NVIDIA
driver and put the device into D3cold, but the GPU had never come back
to D0 again which is why ODMs used the _OSI to expose an old _DSM
method to switch the power on/off.
That has been fixed by commit 5775b843a619 ("PCI: Restore config space
on runtime resume despite being unbound"). so vendors shouldn't be
using this string to modify ASL any more.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make acpi_cpc_valid() check if ACPI is disabled, so that its callers
don't need to check that separately. This will also cause the AMD
pstate driver to refuse to load right away when ACPI is disabled.
Also update the warning message in amd_pstate_init() to mention the
ACPI disabled case for completeness.
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the default association from integer maximum value checks. It is
not necessary and has caused a bug in other associations being unnoticed.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI node pointers are attached to data node handles, in order to resolve
string references to them. _DSD guide allows the same node to be reached
from multiple parent nodes, leading the node enumeration algorithm to each
such nodes more than once. As attached data already already exists,
attaching data with the same tag will fail. Address this problem by
ignoring nodes that have been already tagged.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current code expects the type of the value to be an integer type,
instead the value passed to the macro is a pointer.
Ensure the size comparison uses the correct pointer type to choose the
max value, instead of using the integer type.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: John Garry <john.garry@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The parent field in struct acpi_device is, in fact, redundant,
because the dev.parent field in it effectively points to the same
object and it is used by the driver core.
Accordingly, the parent field can be dropped from struct acpi_device
and for this purpose define acpi_dev_parent() to retrieve a parent
struct acpi_device pointer from the dev.parent field in struct
acpi_device. Next, update all of the users of the parent field
in struct acpi_device to use acpi_dev_parent() instead of it and
drop it.
While at it, drop the ACPI_IS_ROOT_DEVICE() macro that is only used
in one place in a confusing way.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
