summaryrefslogtreecommitdiff
path: root/drivers/accel
AgeCommit message (Collapse)Author
2023-06-05accel/habanalabs: allow user to modify EDMA RL registerRakesh Ughreja
EDMA transpose workload requires to signal for every activation. User FW sends all the dummy signals to RD_LBW_RATE_LIM_CFG, to save lbw bandwidth. We need the user to be able to access that register to configure it. Signed-off-by: Rakesh Ughreja <rughreja@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-05accel/habanalabs: ignore false positive razwiTal Cohen
In Gaudi2 asic, PSOC RAZWI may cause in HBW or LBW. The address that caused the error is read from HW register and printed by the Driver. There are cases where the Driver receives an indication on PSOC RAZWI error but the address value is zero. In that case, the indication is a false positive. The Driver should not "count" a PSOC RAZWI event error when the caused the address is zeroed. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-05accel/habanalabs: remove variable gaudi_irq_nameTom Rix
gcc with W=1 reports drivers/accel/habanalabs/gaudi/gaudi.c:117:19: error: ‘gaudi_irq_name’ defined but not used [-Werror=unused-const-variable=] 117 | static const char gaudi_irq_name[GAUDI_MSI_ENTRIES][GAUDI_MAX_STRING_LEN] = { | ^~~~~~~~~~~~~~ This variable is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-05-23accel/qaic: Fix NNC message corruptionJeffrey Hugo
If msg_xfer() is unable to queue part of a NNC message because the MHI ring is full, it will attempt to give the QSM some time to drain the queue. However, if QSM fails to make any room, msg_xfer() will fail and tell the caller to try again. This is problematic because part of the message may have been committed to the ring and there is no mechanism to revoke that content. This will cause QSM to receive a corrupt message. The better way to do this is to check if the ring has enough space for the entire message before committing any of the message. Since msg_xfer() is under the cntl_mutex no one else can come in and consume the space. Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-6-quic_jhugo@quicinc.com
2023-05-23accel/qaic: Grab ch_lock during QAIC_ATTACH_SLICE_BOPranjal Ramajor Asha Kanojiya
During QAIC_ATTACH_SLICE_BO, we associate a BO to its DBC. We need to grab the dbc->ch_lock to make sure that DBC does not goes away while QAIC_ATTACH_SLICE_BO is still running. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-5-quic_jhugo@quicinc.com
2023-05-23accel/qaic: Flush the transfer list againPranjal Ramajor Asha Kanojiya
Before calling synchronize_srcu() we clear the transfer list, this is to allow all the QAIC_WAIT_BO callers to exit otherwise the system could deadlock. There could be a corner case where more elements get added to transfer list after we have flushed it. Re-flush the transfer list once all the holders of dbc->ch_lock have completed execution i.e. synchronize_srcu() is complete. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-4-quic_jhugo@quicinc.com
2023-05-23accel/qaic: Validate if BO is sliced before slicingPranjal Ramajor Asha Kanojiya
QAIC_ATTACH_SLICE_BO attaches slicing configuration to a BO. Validate if given BO is already sliced. An already sliced BO cannot be sliced again. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-3-quic_jhugo@quicinc.com
2023-05-23accel/qaic: Validate user data before grabbing any lockPranjal Ramajor Asha Kanojiya
Validating user data does not need to be protected by any lock and it is safe to move it out of critical region. Fixes: ff13be830333 ("accel/qaic: Add datapath") Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-2-quic_jhugo@quicinc.com
2023-05-23accel/qaic: initialize ret variable to 0Tom Rix
clang static analysis reports drivers/accel/qaic/qaic_data.c:610:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return ret; ^~~~~~~~~~ From a code analysis of the function, the ret variable is only set some of the time but is always returned. This suggests ret can return uninitialized garbage. However BO allocation will ensure ret is always set in reality. Initialize ret to 0 to silence the warning. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Tom Rix <trix@redhat.com> [jhugo: Reword commit text] Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517165605.16770-1-quic_jhugo@quicinc.com
2023-05-16accel/qaic: silence some uninitialized variable warningsDan Carpenter
Smatch complains that these are not initialized if get_cntl_version() fails but we still print them in the debug message. Not the end of the world, but true enough. Let's just initialize them to a dummy value to make the checker happy. Fixes: c501ca23a6a3 ("accel/qaic: Add uapi and core driver file") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> [jhugo: Add fixes and reorder varable declarations for style] Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/d11ee378-7b06-4b5e-b56f-d66174be1ab3@kili.mountain
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
2023-04-27Merge tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A bit out of routine fixes pull for rc1. There's a build breakage on some platforms due to ttm, this has that fix + qaic uapi removal + minor panel fixes. ttm: - Fix TTM build on archs where PMD_SHIFT is not constant qaic: - Revert uAPI from accel/qaic panel: - Improve error handling in nt35950 - Fix double unregister in otm8009a when removing the driver" * tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm: drm/panel: novatek-nt35950: Only unregister DSI1 if it exists drm/panel: otm8009a: Set backlight parent to panel device drm/panel: novatek-nt35950: Improve error handling drm/ttm: revert "Reduce the number of used allocation orders for TTM pages" Revert "accel/qaic: Add mhi_qaic_cntl"
2023-04-25Merge tag 'hwmon-for-v6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers - Driver for Acbel FSB032 power supply - Driver for StarFive JH71x0 temperature sensor Added support to existing drivers: - aquacomputer_d5next: Support for Aquacomputer Aquastream XT - nct6775: Added various ASUS boards to list of boards supporting WMI - asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator, Notable improvements: - Regulator event and sysfs notification support for PMBus drivers Notable cleanup: - Constified pointers to hwmon_channel_info .. and various other minor bug fixes and improvements" * tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (131 commits) hwmon: lochnagar: Remove the unneeded include <linux/i2c.h> hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E hwmon: (adt7475) Use device_property APIs when configuring polarity hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT hwmon: (it87) Disable/enable SMBus access for IT8622E chipset hwmon: (it87) Add calls to smbus_enable/smbus_disable as required hwmon: (it87) Test for error in it87_update_device hwmon: (it87) Disable SMBus access for environmental controller registers. docs: hwmon: Add documentaion for acbel-fsg032 PSU hwmon: (pmbus/acbel-fsg032) Add Acbel power supply dt-bindings: trivial-devices: Add acbel,fsg032 dt-bindings: vendor-prefixes: Add prefix for acbel hwmon: (sfctemp) Simplify error message hwmon: (pmbus/ibm-cffps) Use default debugfs attributes and lock function hwmon: (pmbus/core) Add lock and unlock functions hwmon: (pmbus/core) Request threaded interrupt with IRQF_ONESHOT hwmon: (nct6775) update ASUS WMI monitoring list A620/B760/W790 hwmon: ina2xx: add optional regulator support dt-bindings: hwmon: ina2xx: add supply property dt-bindings: hwmon: pwm-fan: Convert to DT schema ...
2023-04-25Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "There is a new Qualcomm accel driver for their QAIC, dma-fence got a deadline feature added, lots of refactoring around fbdev emulation, and the usual pre-release hw enablements from AMD and Intel and fixes everywhere. New drivers: - add QAIC acceleration driver dma-buf: - constify kobj_type structs - Reject prime DMA-Buf attachment if get_sg_table is missing. fbdev: - cmdline parser fixes - implement fbdev emulation for GEM DMA drivers - always use shadow buffer in fbdev emulation helpers dma-fence: - add deadline hint to fences - signal private stub fence core: - improve DisplayID 2.0 and EDID parsing - add gem eviction function + callback - prep to convert shmem helper to GEM resv lock - move suballocator from radeon/amdgpu to core for Xe - HPD polling fixes - Documentation improvements - Add atomic enable_plane callback - use tgid instead of pid for client tracking - DP: Add SDP Error Detection Configuration Register - Add prime import/export to vram-helper - use pci aperture helpers in more drivers panel: - Radxa 8/10HD support - Samsung AMD495QA01 support - Elida KD50T048A - Sony TD4353 - Novatek NT36523 - STARRY 2081101QFH032011-53G - B133UAN01.0 - AUO NE135FBM-N41 i915: - More MTL enabling - fix s/r problems with MEI/PXP - Implement fb_dirty for PSR,FBC,DRRS fixes - Fix eDP+DSI dual panel systems - Fix issue #6333: "list_add corruption" and full system lockup from performance monitoring - Don't use stolen memory or BAR for ring buffers on LLC platforms - Make sure DSM size has correct 1MiB granularity on Gen12+ - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+ - Add engine TLB invalidation for Meteorlake - Fix GSC races on driver load/unload on Meteorlake+ - Make kobj_type structures constant - Move fd_install after last use of fence - wm/vblank refactoring - display code refactoring - Create GSC submission targeting HDCP and PXP usages on MTL+ - Enable HDCP2.x via GSC CS - Fix context runtime accounting on sysfs fdinfo for heavy workloads - Use i915 instead of dev_priv insied the file_priv structure - Replace fake flex-array with flexible-array member amdgpu: - Make kobj structures const - Generalize dmabuf import to work with KFD - Add capped/uncapped workload handling for supported APUs - Expose additional memory stats via fdinfo - Register vga_switcheroo for apple-gmux - Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support - Initial DC FAM infrastructure - Link DC backlight to connector device rather than PCI device - Add sysfs nodes for secondary VCN clocks amdkfd: - Make kobj structures const - Support for exporting buffers via dmabuf - Multi-VMA page migration fixes - initial GC 9.4.3 support radeon: - iMac fix - convert to client based fbdev emulation habanalabs: - Add opcodes to the CS ioctl to allow user to stall/resume specific engines inside Gaudi2. - INFO ioctl the amount of device memory that the driver and f/w reserve for themselves. - INFO ioctl a bit-mask of the available rotator engines - INFO ioctl the register's address of the f/w that should be used to trigger interrupts - INFO ioctl two new opcodes to fetch information on h/w and f/w events - Enable graceful reset mechanism for compute-reset. - Align to the latest firmware specs. - Enforce the release order of the compute device and dma-buf. msm: - UBWC decoder programming rework - SM8550, SM8450 bindings update - uapi C++ fix - a3xx and a4xx devfreq support - GPU and GEM updates to avoid allocations which could trigger reclaim (shrinker) in fence signaling path - dma-fence deadline hint support and wait-boost - a640/650 speed bin support cirrus: - convert to regular atomic helpers - add damage clipping mediatek: - 10-bit overlay support - mt8195 support - Only trigger DRM HPD events if bridge is attached - Change the aux retries times when receiving AUX_DEFER rockchip: - add 4K support vc4: - use drm_gem_objects virtio: - allow KMS support to be disabled - add damage clipping vmwgfx: - buffer object lifetime fixes exynos: - move MIPI DSI driver to drm bridge for iMX sharing - use kernel fbdev emulation panfrost: - add support for mali MT81xx devices - add speed binning support lima: - add usage stats tegra: - fbdev client conversion vkms: - Add primary plane positioning support" * tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits) drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams drm/exynos: Implement fbdev emulation as in-kernel client drm/exynos: Initialize fbdev DRM client drm/exynos: Remove fb_helper from struct exynos_drm_private drm/exynos: Remove struct exynos_drm_fbdev drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev drm/i915: Fix memory leaks in i915 selftests drm/i915: Make intel_get_crtc_new_encoder() less oopsy drm/i915/gt: Avoid out-of-bounds access when loading HuC drm/amdgpu: add some basic elements for multiple XCD case drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4) Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV" drm/amdgpu: add common ip block for GC 9.4.3 drm/amd/display: Add logging when DP link training Clock recovery is Successful drm/amdgpu: add common early init support for GC 9.4.3 drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3 drm/amd/display: Add logging when setting DP sink power state fails drm/amdkfd: Add gfx_target_version for GC 9.4.3 drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3 drm/amdgpu: reserve the old gc_11_0_*_mes.bin ...
2023-04-13Revert "accel/qaic: Add mhi_qaic_cntl"Jeffrey Hugo
This reverts commit 566fc96198b4bb07ca6806386956669881225271. This exposes a userspace API that is still under debate. Revert the change before the uAPI gets exposed to avoid making a mistake. QAIC is otherwise still functional. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1681307864-3782-1-git-send-email-quic_jhugo@quicinc.com
2023-04-08accel/habanalabs: add missing error flow in hl_sysfs_init()Tomer Tayar
hl_sysfs_fini() is called only if hl_sysfs_init() completes successfully. Therefore if hl_sysfs_init() fails, need to remove any sysfs group that was added until that point. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: speedup h/w queues test in Gaudi2Moti Haimovski
HW queues testing at driver load and after reset takes a substantial amount of time. This commit reduces the queues test time in Gaudi2 devices by running all the tests in parallel instead of one after the other. Time measurements on tests duration shows that the new method is almost x100 faster than the serial approach. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: fix handling of arc farm sei eventDani Liberman
There is only single eq entry for arc farm sei event which aggregates events from the four arc farms. Fix the code to handle this event according to this behavior. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: remove Gaudi1 multi MSI codeOfir Bitton
Multi MSI interrupts aren't working in Gaudi1 and because of that, we are only using a single MSI interrupt. Therefore, let's remove this dead code in order to avoid confusion. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: fixes for unexpected error interruptOfir Bitton
Removing redundant asic prop variable as we don't need to expose this to common code. In addition, fix some typos. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: don't wait for STS_OK after sending COMMS WFEKoby Elbaz
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state). Once sent, FW's CPU isn't expected to continue communicating with LKD. Therefore, the stage of waiting for COMMS_STS_OK should be skipped or else waiting for COMMS_STS_OK will simply timeout, which will trigger unexpected behavior. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: sync f/w events interrupt in hard resetTal Cohen
Receiving events from FW, while the device is in hard reset, causes a warning message in Driver log. The message may point to a problem in the Driver or FW. But It also can appear as a result of events that have been sent from FW just before the hard reset. In order to avoid receiving events from FW while the device is in reset and is already in 'disabled' mode, sync the f/w events interrupt right before setting the device to 'disabled'. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: fix wrong reset and event flagsOfir Bitton
During event handling, driver sets relevant reset and user event notifier flags. Fix few wrong flags settings. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: fix events mask of decoder abnormal interruptsTomer Tayar
The decoder IRQ status register may have several set bits upon an abnormal interrupt. Therefore, when setting the events mask, need to check all bits and not using if-else. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: remove completion from abnormal interrupt work nameTomer Tayar
Decoder abnormal interrupts are for errors and not for completion, so rename the relevant work and work function to not include 'completion'. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: print raw binning masks in debug levelOfir Bitton
There are rare cases of failures when cards are initialized due to wrong values in efuse mappings that are parsed by firmware. To help debug those cases, print (in debug level) the raw binning masks as fetched from the firmware during device initialization. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: fix HBM MMU interrupt handlingOfir Bitton
Current mapping between HMMU event and HMMU block is wrong. In addition the captured address in case of a page fault or an access error is scrambled, Hence we must call the descramble function. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: improvements to FW ver extractionDafna Hirschfeld
1. Rename the func to hl_get_preboot_major_minor because we also set the extracted values in hdev fields. 2. Free the allocated string in the calling function which makes more sense Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: fix access error clear eventDani Liberman
The register which needs to be cleared is the valid register instead of the address. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-08accel/habanalabs: send disable pci when compute ctx is activeTal Cohen
Fix an issue in hard reset flow in which the driver didn't send a disable pci message if there was an active compute context. In hard reset, disable pci message should be sent no matter if a compute context exists or not. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2023-04-08accel/habanalabs: remove duplicated disable pci msgTal Cohen
The disable pci message is sent in reset device. It informs the FW not to raise more EQs. The Driver may ignore received EQs, when the device is in disabled mode. The duplication happens when hard reset is scheduled during compute reset and also performs 'escalate_reset_flow'. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2023-04-08accel/habanalabs: change COMMS warning messages to error levelKoby Elbaz
COMMS protocol is used for LKD <--> FW communication, and any communication failure between the two might turn out to be destructive, hence, it should be well emphasized. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2023-04-08accel/habanalabs: check return value of add_va_block_lockedDafna Hirschfeld
since the function might fail and we should propagate the failure. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2023-04-08accel/habanalabs: print event type when device is disabledTal Cohen
When the device is in disabled state, the driver isn't suppose to receive any events from FW. Printing the event type, as part of the message that was already printed, shall help to get more info if this unexpected message is received. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2023-04-08accel/habanalabs: unmap mapped memory when TLB inv failsKoby Elbaz
Once a memory mapping is added to the page tables, it's followed by a TLB invalidation request which could potentially fail (HW failure). Removing the mapping is simply a part of this failure handling routine. TLB invalidation failure prints were updated to be more accurate. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2023-04-08accel/habanalabs: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-04-07hwmon: constify pointers to hwmon_channel_infoKrzysztof Kozlowski
HWmon core receives an array of pointers to hwmon_channel_info and it does not modify it, thus it can be array of const pointers for safety. This allows drivers to make them also const. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-06accel/qaic: Add qaic driver to the build systemJeffrey Hugo
Now that we have all the components of a minimum QAIC which can boot and run an AIC100 device, add the infrastructure that allows the QAIC driver to be built. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-8-git-send-email-quic_jhugo@quicinc.com
2023-04-06accel/qaic: Add mhi_qaic_cntlPranjal Ramajor Asha Kanojiya
Some of the MHI channels for an AIC100 device need to be routed to userspace so that userspace can communicate directly with QSM. The MHI bus does not support this, and while the WWAN subsystem does (for the same reasons), AIC100 is not a WWAN device. Also, MHI is not something that other accelerators are expected to share, thus an accel subsystem function that meets this usecase is unlikely. Create a QAIC specific MHI userspace shim that exposes these channels. Start with QAIC_SAHARA which is required to boot AIC100 and is consumed by the kickstart application as documented in aic100.rst Each AIC100 instance (currently, up to 16) in a system will create a chardev for QAIC_SAHARA. This chardev will be found as /dev/<mhi instance>_QAIC_SAHARA For example - /dev/mhi0_QAIC_SAHARA Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-7-git-send-email-quic_jhugo@quicinc.com
2023-04-06accel/qaic: Add datapathJeffrey Hugo
Add the datapath component that manages BOs and submits them to running workloads on the qaic device via the dma_bridge hardware. This allows QAIC clients to interact with their workloads (run inferences) via the following ioctls along with mmap(): DRM_IOCTL_QAIC_CREATE_BO DRM_IOCTL_QAIC_MMAP_BO DRM_IOCTL_QAIC_ATTACH_SLICE_BO DRM_IOCTL_QAIC_EXECUTE_BO DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO DRM_IOCTL_QAIC_WAIT_BO DRM_IOCTL_QAIC_PERF_STATS_BO Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-6-git-send-email-quic_jhugo@quicinc.com
2023-04-06accel/qaic: Add control pathJeffrey Hugo
Add the control path component that talks to the management processor (QSM) to load workloads onto the AIC100 device. This implements the KMD portion of the NNC protocol over the QAIC_CONTROL MHI channel and the DRM_IOCTL_QAIC_MANAGE IOCTL to userspace. With this functionality, QAIC clients are able to load, run, and cleanup their workloads on the device but not interact with the workloads (run inferences). Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-5-git-send-email-quic_jhugo@quicinc.com
2023-04-06accel/qaic: Add MHI controllerJeffrey Hugo
An AIC100 device contains a MHI interface with a number of different channels for controlling different aspects of the device. The MHI controller works with the MHI bus to enable and drive that interface. AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and expects the MHI bus to manage the process of loading and sending SBL to the device. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-4-git-send-email-quic_jhugo@quicinc.com
2023-04-06accel/qaic: Add uapi and core driver fileJeffrey Hugo
Add the QAIC driver uapi file and core driver file that binds to the PCIe device. The core driver file also creates the accel device and manages all the interconnections between the different parts of the driver. The driver can be built as a module. If so, it will be called "qaic.ko". Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-3-git-send-email-quic_jhugo@quicinc.com
2023-04-05accel/ivpu: Fix S3 system suspend when not idleJacek Lawrynowicz
Wait for VPU to be idle in ivpu_pm_suspend_cb() before powering off the device, so jobs are not lost and TDRs are not triggered after resume. Fixes: 852be13f3bd3 ("accel/ivpu: Add PM support") Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-3-stanislaw.gruszka@linux.intel.com
2023-04-05accel/ivpu: Add dma fence to command buffers onlyKarol Wachowski
Currently job->done_fence is added to every BO handle within a job. If job handle (command buffer) is shared between multiple submits, KMD will add the fence in each of them. Then bo_wait_ioctl() executed on command buffer will exit only when all jobs containing that handle are done. This creates deadlock scenario for user mode driver in case when job handle is added as dependency of another job, because bo_wait_ioctl() of first job will wait until second job finishes, and second job can not finish before first one. Having fences added only to job buffer handle allows user space to execute bo_wait_ioctl() on the job even if it's handle is submitted with other job. Fixes: cd7272215c44 ("accel/ivpu: Add command buffer submission logic") Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-2-stanislaw.gruszka@linux.intel.com
2023-04-05accel/ivpu: Remove D3hot delay for MeteorlakeKarol Wachowski
VPU on MTL has hardware optimizations and does not require 10ms D0 - D3hot transition delay imposed by PCI specification (PCIe r6.0, sec 5.9.) . The delay removal is traditionally done by adding PCI ID to quirk_remove_d3hot_delay() in drivers/pci/quirks.c . But since we do not need that optimization before driver probe and we can better specify in the ivpu driver on what (future) hardware use the optimization, we do not use quirk_remove_d3hot_delay() for that. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403121545.2995279-1-stanislaw.gruszka@linux.intel.com
2023-04-03Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-24accel/ivpu: Fix IPC buffer header status field valueAndrzej Kacprowski
IPC messages transmitted to the device must be marked as allocated - status field must be set to 1. The VPU driver has IVPU_IPC_HDR_ALLOCATED incorrectly defined. Future VPU firmware versions will reject all IPC messages with invalid status and will not work with a VPU driver that is missing this fix. Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages") Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-9-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Fix VPU clock calculationStanislaw Gruszka
The driver calculates the wrong frequency because it ignores the workpoint config and this cause undesired power/performance characteristics. Fix this by using the workpoint config in the freq calculations. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-8-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Remove support for 1 tile SKUsStanislaw Gruszka
The support for single tile SKUs was dropped from MTL. Note that we can still boot the VPU with 1-tile work point config - this is independent from number of tiles present in the VPU. Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-7-stanislaw.gruszka@linux.intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 13:26:23 +0000