summaryrefslogtreecommitdiff
path: root/drivers/accel/ivpu
AgeCommit message (Collapse)Author
2024-10-11accel/ivpu: Add test_mode bit to force turboAndrzej Kacprowski
Add new test_mode BIT(9) that forces firmware to enable turbo burst mode. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-20-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Make DB_ID and JOB_ID allocations incrementalTomasz Rusinowicz
Save last used ID and use it to limit the possible values for the ID. This should decrease the rate at which the IDs are reused, which will make debugging easier. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-19-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Print JSM message result in case of errorKarol Wachowski
Change debug message to error level in case of receiving non-successful result of JSM message. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add auto selection logic for job schedulerJacek Lawrynowicz
Add ivpu_fw_sched_mode_select() function that can select scheduling mode based on HW and FW versions. This prepares for a switch to HWS on selected platforms. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-17-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add one jiffy to bo_wait_ioctl timeout valueKarol Wachowski
Add one jiffy to ensure wait function never times out before intended timeout value, which could happen if absolute timeout value is less than (1s / CONFIG_HZ) in the future. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-16-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Allow reading dvfs_mode debugfs fileAndrzej Kacprowski
Make the dvfs_mode read-write to allow checking current mode. Simplify the dvfs_mode implementation with the DEFINE_DEBUGFS_ATTRIBUTE. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-15-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove 1-tile power up Simics workaroundKarol Wachowski
Previously Simics was not providing workpoint for configurations with 0 tiles enabled, that had to be worked around in the KMD. This got fixed in Simics and workaround is no longer needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-14-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Stop using hardcoded DRIVER_DATEJacek Lawrynowicz
Hardcoded driver date is useless, so use kernel version as a driver date to make identifying .ko file easier. Also allow to pass DRIVER_DATE on build time to allow versioning the driver in case it is built out of the tree. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW version debugfs entryKarol Wachowski
Add debugfs that prints current firmware version string on read. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-12-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Turn on autosuspend on SimicsKarol Wachowski
With recent Simics update DVFS flows using cdyn were fixed and it is possible to enable D0i3/D3 entry flows on autosuspend. Set autosuspend timeout to 100 ms by default on Simics. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLEKarol Wachowski
Follow HW documentation recommendation of 500 ns delay between setting AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power island enabling. Previously this was only done correctly for VPU 4+. VPU 3.7 had the delay added after power island disable where it is not needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW state dump on TDRTomasz Rusinowicz
Send JSM state dump message at the beginning of TDR handler. This allows FW to collect debug info in the FW log before the state of the NPU is lost allowing to analyze the cause of a TDR. Wait a predefined timeout (10 ms) so the FW has a chance to write debug logs. We cannot wait for JSM response at this point because IRQs are already disabled before TDR handler is invoked. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add coredump supportKarol Wachowski
Use coredump (if available) to collect FW logs in case of a FW crash. This makes dmesg more readable and allows to collect more log data. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Limit FW version string lengthJacek Lawrynowicz
Limit FW version string, when parsing FW binary, to 256 bytes and always add NULL-terminate it. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-7-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix fw log printingJacek Lawrynowicz
- Fix empty log detection that couldn't work without read_wrap_count - Start printing wrapped log from correct position (log_start) - Properly handle logs that are wrapped multiple times in reference to reader position - Don't add a newline when log buffer is wrapped - Always add a newline after printing a log buffer in case log does not end with one Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Refactor functions in ivpu_fw_log.cJacek Lawrynowicz
Make function names more consistent and (arguably) readable in fw log code. Add fw_log_print_all_in_bo() that remove duplicated code in ivpu_fw_log_print(). Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-5-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Reset fw log on cold bootTomasz Rusinowicz
Add ivpu_fw_log_reset() that resets the read_index of all FW logs on cold boot so logs are properly read. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Rename ivpu_log_level to fw_log_levelJacek Lawrynowicz
Rename module param ivpu_log_level to fw_log_level, so it is clear what log level is actually changed. Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-3-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Update VPU FW API headersAndrzej Kacprowski
This commit bumps: - Boot API from 3.24.0 to 3.26.3 - JSM API from 3.16.0 to 3.25.0 Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Co-developed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-2-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-09-24accel/ivpu: Fix a typoAndrew Kreimer
Fix a typo in comments. Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240909135655.45938-1-algonell@gmail.com
2024-07-15accel/ivpu: Add missing MODULE_FIRMWARE metadataAlexander F. Lent
Modules that load firmware from various paths at runtime must declare those paths at compile time, via the MODULE_FIRMWARE macro, so that the firmware paths are included in the module's metadata. The accel/ivpu driver loads firmware but lacks this metadata, preventing dracut from correctly locating firmware files. Fix it. Fixes: 9ab43e95f922 ("accel/ivpu: Switch to generation based FW names") Fixes: 02d5b0aacd05 ("accel/ivpu: Implement firmware parsing and booting") Signed-off-by: Alexander F. Lent <lx@xanderlent.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240709-fix-ivpu-firmware-metadata-v3-1-55f70bba055b@xanderlent.com
2024-06-14accel/ivpu: Remove unused ivpu_rpm_get_if_active()Jacek Lawrynowicz
This is now dead code and has to be removed. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-16-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Remove duplicated debug messagesJacek Lawrynowicz
Remove duplicated debug messages from ivpu_jsm_(un)register_db(). Debug messages are already printed one level higher. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-15-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Increase autosuspend delay to 100ms on 40xxAndrzej Kacprowski
The new HW is more power efficient and there is no need to enter the D0i3/D3 so quickly. Increasing autosuspend delay reduces latency in certain usage scenarios. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-14-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Synchronize device unbind with recovery workWachowski, Karol
Do not allow unbinding device in the middle of recovery flow. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-13-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Disable MMU before checking for idleJacek Lawrynowicz
Disable MMU communication before checking if NPU is idle. NPU may otherwise be woken up when adding/removing contexts. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-12-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Add test mode flag for disabling timeoutsMaciej Falkowski
Add new test mode flag that will disable all timeouts defined in timeout fields of struct ivpu_device. Remove also reschedule_suspend field as it is unused. Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-11-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Make parts of FW image read-onlyWachowski, Karol
Implement setting specified buffer ranges as read-only. In case if specified range is not 64K aligned and 64K contiguous MMU600 pages are turned on, split 64K mapping to allow 4K granularity for read-only configuration. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-10-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Update FW BOOT API headersWachowski, Karol
This commit bumps BOOT API version to 3.24 Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-9-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Make selected params read-onlyJacek Lawrynowicz
Make disable_mmu_cont_pages and force_snoop params read-only. It is unsafe to change these params after driver is loaded. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-8-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Implement DCT handlingJacek Lawrynowicz
When host system is under heavy load and the NPU is already running on the lowest frequency, PUNIT may request Duty Cycle Throttling (DCT). This will further reduce NPU power usage. PUNIT requests DCT mode using Survabilty IRQ and mailbox register. The driver then issues a JSM message to the FW that enables the DCT mode. If the NPU resets while in DCT mode, the driver request DCT mode during FW boot. Also add debugfs "dct" file that allows to set arbitrary DCT percentage, which is used by driver tests. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-7-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Disable clock relinquish for MMIO resetWachowski, Karol
It is required to disable NPU clock relinquish for the time of MMIO reset. Clock relinquish gets into default (enabled) state after MMIO reset is performed. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-6-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Disable disable_clock_relinquish WA for LNL B0+Wachowski, Karol
This WA is only needed for LNL revision A. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-5-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Remove suspend_reschedule_counterJacek Lawrynowicz
Don't retry runtime suspend. It is now expected to succeed on the first try. After autosuspend_delay passed, FW should already be idle and ready for warm suspend. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-4-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Abort jobs of faulty contextMaciej Falkowski
Abort all jobs that belong to contexts generating MMU faults in order to avoid flooding host with MMU IRQs. Jobs are cancelled with: - SSID_RELEASE command when OS scheduling is enabled - DESTROY_CMDQ command when HW scheduling is enabled Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com> Co-developed-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-3-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Add wp0_during_power_up WAWachowski, Karol
Send workpoint 0 request during power up on 37xx. This is needed in rare case where WP0 was not sent during power down due to device hang. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-2-jacek.lawrynowicz@linux.intel.com
2024-05-27Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's start the new release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-05-19Merge tag 'mm-stable-2024-05-17-19-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...
2024-05-17accel/ivpu: Replace wake_thread with kfifoJacek Lawrynowicz
Use kfifo to pass IRQ sources to IRQ thread so it will be possible to use IRQ thread by multiple IRQ types. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-4-jacek.lawrynowicz@linux.intel.com
2024-05-17accel/ivpu: Split IP and buttress codeWachowski, Karol
The NPU device consists of two parts: NPU buttress and NPU IP. Buttress is a platform specific part that integrates the NPU IP with the CPU. NPU IP is the platform agnostic part that does the inference. This separation enables support for multiple platforms using a single NPU IP, so for example NPU IP 37XX could be integrated into MTL and LNL platforms. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-3-jacek.lawrynowicz@linux.intel.com
2024-05-17accel/ivpu: Split IP and buttress headersWachowski, Karol
Move buttress registers to ivpu_hw_btrs_*_reg.h headers. This is an intermediate step before HW layer refactor. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-2-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Share NPU busy time in sysfsTomasz Rusinowicz
The driver tracks the time spent by NPU executing jobs and shares it through sysfs `npu_busy_time_us` file. It can be then used by user space applications to monitor device utilization. NPU is considered 'busy' starting with a first job submitted to firmware and ending when there is no more jobs pending/executing. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-13-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Increase reset counter when warm boot failsJacek Lawrynowicz
Failed warm boot causes a cold boot that looses FW state and is equivalent to a recovery or reset, so reset_counter should be incremented in order for this failure to be detected by tests. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-12-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Configure fw logging using debugfsTomasz Rusinowicz
Add fw_dyndbg file that can be used to control FW logging. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-11-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add force snoop module parameterWachowski, Karol
Add module parameter that enforces snooping for all NPU accesses, both through MMU PTEs mappings and through TCU page table walk override register bits for MMU page walks / configuration access. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-10-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add NPU profiling supportTomasz Rusinowicz
Implement time based Metric Streamer profiling UAPI. This is a generic mechanism allowing user mode tools to sample NPU metrics. These metrics are defined by the FW and transparent to the driver. The user space can check for this feature by checking DRM_IVPU_CAP_METRIC_STREAMER driver capability. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-9-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add resume engine supportWachowski, Karol
Create debugfs interface that triggers sending resume engine IPC command to VPU. It is used to test engine resume functionality in driver user space tests. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-8-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Implement support for hardware schedulerWachowski, Karol
Add support for HWS (hardware scheduler). It is disabled by default. The sched_mode module param can be used to enable it. Each context has multiple command queues with different priorities and HWS enables priority based execution on the HW/FW side. The driver in HWS mode has to send a couple additional messages to initialize HWS and describe command queue priorities. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-7-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Add HWS JSM messagesWachowski, Karol
Add JSM messages that will be used to implement hardware scheduler. Most of these messages are used to create and manage HWS specific command queues. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-6-jacek.lawrynowicz@linux.intel.com
2024-05-15accel/ivpu: Implement support for preemption buffersWachowski, Karol
Allocate per-context preemption buffers that are required by HWS. There are two preemption buffers: * primary - allocated in user memory range (PIOVA accessible) * secondary - allocated in shave memory range Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-5-jacek.lawrynowicz@linux.intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 22:16:21 +0000