| Age | Commit message (Collapse) | Author |
|---|
|
All the other DARTs are named foo-dart, so let's keep things consistent.
Fixes: 51979fbb7fb8 ("arm64: dts: apple: t600x: Add MCA and its support")
Fixes: 8a3df85ad87d ("arm64: dts: apple: t8103: Add MCA and its support")
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The PCIe iommu nodes use "dart" as node names. Replace it with the
the standard "iommu" node name as all other iommu nodes.
Fixes: 7b0b0191a2c7 ("arm64: dts: apple: Add initial t6000/t6001/t6002 DTs")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
The PCIe iommu nodes use "dart" as node names. Replace it with the
the standard "iommu" node name as all other iommu nodes.
Fixes: 3c866bb79577 ("arm64: dts: apple: t8103: Add PCIe DARTs")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
xtensa gcc-13 has changed multiplication handling and may now use
__umulsidi3 helper where it used to use __muldi3. As a result building
the kernel with the new gcc may fail with the following error:
linux/init/main.c:1287: undefined reference to `__umulsidi3'
Fix the build by providing __umulsidi3 implementation for xtensa.
Cc: stable@vger.kernel.org # 5.18+
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
"make dtbs_check":
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dtb: i2cswitch@70: $nodename:0: 'i2cswitch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dtb: i2cswitch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9548 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
For BPF_PSEUDO_FUNC instruction, verifier will refill imm with
correct addresses of bpf_calls and then run last pass of JIT.
Since the emit_imm of RV64 is variable-length, which will emit
appropriate length instructions accorroding to the imm, it may
broke ctx->offset, and lead to unpredictable problem, such as
inaccurate jump. So let's fix it with fixed-length instructions.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Suggested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20221206091410.1584784-1-pulehui@huaweicloud.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Revert the dropping of the cache invalidation from the arm64
arch_dma_prep_coherent() as it caused a regression in the
qcom_q6v5_mss remoteproc driver.
The driver is already buggy but the original arm64 change made
the problem obvious. The change will be re-introduced once the
driver is fixed"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"
|
|
Pull kvm fixes from Paolo Bonzini:
"Unless anything comes from the ARM side, this should be the last pull
request for this release - and it's mostly documentation:
- Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
- s390: fix multi-epoch extension in nested guests
- x86: fix uninitialized variable on nested triple fault"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
KVM: Move halt-polling documentation into common directory
KVM: x86: fix uninitialized variable use on KVM_REQ_TRIPLE_FAULT
KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field
|
|
This reverts commit c44094eee32f32f175aadc0efcac449d99b1bbf7.
Although the semantics of the DMA API require only a clean operation
here, it turns out that the Qualcomm 'qcom_q6v5_mss' remoteproc driver
(ab)uses the DMA API for transferring the modem firmware to the secure
world via calls to Trustzone [1].
Once the firmware buffer has changed hands, _any_ access from the
non-secure side (i.e. Linux) will be detected on the bus and result in a
full system reset [2]. Although this is possible even with this revert
in place (due to speculative reads via the cacheable linear alias of
memory), anecdotally the problem occurs considerably more frequently
when the lines have not been invalidated, assumedly due to some
micro-architectural interactions with the cache hierarchy.
Revert the offending change for now, along with a comment, so that the
Qualcomm developers have time to fix the driver [3] to use a firmware
buffer which does not have a cacheable alias in the linear map.
Link: https://lore.kernel.org/r/20221114110329.68413-1-manivannan.sadhasivam@linaro.org [1]
Link: https://lore.kernel.org/r/CAMi1Hd3H2k1J8hJ6e-Miy5+nVDNzv6qQ3nN-9929B0GbHJkXEg@mail.gmail.com/ [2]
Link: https://lore.kernel.org/r/20221206092152.GD15486@thinkpad [2]
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20221206103403.646-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The SC8280XP UFS controllers are cache coherent and must be marked as
such in the devicetree to avoid potential data corruption.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221205100837.29212-3-johan+linaro@kernel.org
|
|
Add DT for sc7280-herobrine-zombie
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221205133603.v15.2.I80aa32497bfd67bc8a372c1418ccc443ccf193e4@changeid
|
|
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc":
qcom/sm8250-sony-xperia-edo-pdx206.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-6-krzysztof.kozlowski@linaro.org
|
|
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc":
qcom/sdm845-sony-xperia-tama-akatsuki.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-5-krzysztof.kozlowski@linaro.org
|
|
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc":
qcom/sda660-inforce-ifc6560.dtb: mmc@c084000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-4-krzysztof.kozlowski@linaro.org
|
|
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc":
qcom/sa8155p-adp.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-3-krzysztof.kozlowski@linaro.org
|
|
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc":
qcom/qrb5165-rb5.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-2-krzysztof.kozlowski@linaro.org
|
|
The bindings expect "mmc" for MMC/SDHCI nodes:
qcom/sm8450-sony-xperia-nagara-pdx223.dtb: sdhci@8804000: $nodename:0: 'sdhci@8804000' does not match '^mmc(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204094438.73288-1-krzysztof.kozlowski@linaro.org
|
|
According to Devicetree specification, the node names should be somewhat
generic. Use "amplifier" for max98360a and "-regulator" for fixed
regulators.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221203161443.97656-1-krzysztof.kozlowski@linaro.org
|
|
Add sound support to SM8450 HDK board. Tested setup so far is only two
speakers (working) and head-phones (only one channel working).
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202152054.357316-4-krzysztof.kozlowski@linaro.org
|
|
Add Soundwire controllers, Low Power Audio SubSystem (LPASS) devices and
LPASS pin controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202152054.357316-3-krzysztof.kozlowski@linaro.org
|
|
Add Generic Packet Router (GPR) device node with ADSP services.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202152054.357316-2-krzysztof.kozlowski@linaro.org
|
|
Add the vreg_l11a, pcie3a, pcie3a_phy, and tlmm nodes that are necessary
in order to get PCIe working on the QDrive3.
This patch also increases the width of the ranges property for the PCIe
switch that's found on this platform. Note that this change requires
the latest trustzone (TZ) firmware that's available from Qualcomm as
of November 2022. If this is used against a board with the older
firmware, then the board will go into ramdump mode when PCIe is probed
on startup.
The ranges property is overridden in this sa8540p-ride.dts file since
this is what's used to describe the QDrive3 variant with dual SoCs.
There's another variant of this board that only has a single SoC where
this change is not applicable, and hence why this specific change was
not done in sa8540p.dtsi.
These changes were derived from various patches that Qualcomm
delivered to Red Hat in a downstream kernel.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202120918.2252647-1-bmasney@redhat.com
|
|
Add fallback to generic qcom mmu-500 implementation.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-13-a39.skl@gmail.com
|
|
Add WCN node to allow using wifi module.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-12-a39.skl@gmail.com
|
|
Add I2C/SPI nodes for SM6115.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-11-a39.skl@gmail.com
|
|
Add GPI DMA node which will be wired to i2c/spi/uart.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-10-a39.skl@gmail.com
|
|
Add mdss and dpu node to enable display support on SM6115.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-9-a39.skl@gmail.com
|
|
Add display clock controller to allow controlling display related clocks.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Pushed dsi_phy reference into next patch]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-8-a39.skl@gmail.com
|
|
Add rpm stats node.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-7-a39.skl@gmail.com
|
|
Add a node for the PRNG to enable hw-accelerated pseudo-random number
generation.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-6-a39.skl@gmail.com
|
|
Add nodes required for TSENS block using the common qcom,tsens-v2 binding.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-5-a39.skl@gmail.com
|
|
Add cpufreq-hw node and assign qcom,freq-domain properties
to CPUs to enable CPU clock scaling.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130200950.144618-4-a39.skl@gmail.com
|
|
WT88047 uses OCP 8110 Flash LED driver. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128051512.125148-1-linmengbo0689@protonmail.com
|
|
The node names should be generic and DT schema expects certain pattern:
qcom/msm8998-oneplus-cheeseburger.dtb: leds: 'button-backlight' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
qcom/sc7180-trogdor-coachz-r1.dtb: pwmleds: 'keyboard-backlight' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125144209.477328-1-krzysztof.kozlowski@linaro.org
|
|
Introduce the Qualcomm SA8540P ride automotive platform, also known as
Qdrive-3 development board.
This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh
regulators, debug UART, PMICs, remoteprocs and USB.
The SA8540P ride contains four PM8450 PMICs. A separate DTSI file has
been created for PMIC, so that it can be used for future SA8540P based
boards.
Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118025158.16902-3-quic_ppareek@quicinc.com
|
|
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX223&224 DTSIs to better document the hardware.
Diff between 223 and 224:
< gpio-line-names = "NC", /* GPIO_0 */
< "NC",
< "NC",
< "NC",
> gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
> "TELE_SPI_MOSI",
> "TELE_SPI_CLK",
> "TELE_SPI_CS_N",
< "PM8010_2_RESET_N",
> "NC",
< "NC",
> "UWIDEC_PWR_EN",
< "TOF_RST_N",
> "NC"
< "QLINK1_REQ",
< "QLINK1_EN", /* GPIO_160 */
< "QLINK1_WMSS_RESET_N",
> "NC",
> "NC", /* GPIO_160 */
> "NC",
The tele lens setup is different on 1 IV and 5 IV and power wiring
is different for some lenses, so it makes sense. As for QLINK, no
idea.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117141613.19942-1-konrad.dybcio@linaro.org
|
|
This is a device property, not a bus host one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117105845.13644-1-konrad.dybcio@linaro.org
|
|
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117053145.10409-3-manivannan.sadhasivam@linaro.org
|
|
The Vision Mezzanine for the RB5 ships with an imx577 and ov9282 populated.
Other sensors and components may be added or stacked with additional
mezzanines.
Enable the IMX577 on the vision mezzanine.
An example media-ctl pipeline for the imx577 is:
media-ctl --reset
media-ctl -v -d /dev/media0 -V '"imx577 '22-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-8-bryan.odonoghue@linaro.org
|
|
Define the set of possible ports, one for each CSI PHY along with the port
address and size cells @ the SoC dtsi level.
Suggested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-7-bryan.odonoghue@linaro.org
|
|
mezzanine dts
Move the dts data for the rb3 navigation mezzanine into its own dts file.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-6-bryan.odonoghue@linaro.org
|
|
status
Use preferred "ok" not "okay".
Use preferred status "disabled" instead of "disable".
There's no functional change here so no Fixes has been applied.
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-5-bryan.odonoghue@linaro.org
|
|
The reg for the port is specified in the dtsi. Remove from the db845c dts.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-4-bryan.odonoghue@linaro.org
|
|
declaration
sdm845.dtsi camss already defines the address-cells and size-cells for
camss, no need to replicate in sdm845-db845c.dts.
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-3-bryan.odonoghue@linaro.org
|
|
The number of available ports is SoC specific so we should define it in the
SoC dtsi. For the case of the sdm845 that is 4 CSI PHYs => four ports.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117003232.589734-2-bryan.odonoghue@linaro.org
|
|
Adjust regulators, add required pin setup and finally enable SDHCI2
to get the SD Card slot going on Sagami Xperias.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116123612.34302-4-konrad.dybcio@linaro.org
|
|
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the Sagami-common / PDX215 DTSIs to better document the
hardware.
Diff between 215 and common:
< "NC",
< "NC",
> "WLC_I2C_SDA",
> "WLC_I2C_SCL",
< "NC",
> "WLC_INT_N",
> "CAM_MCLK4",
< "NC",
< "NC",
> "TOF_RST_N",
< "NC",
< "NC",
< "NC",
> "QLINK1_REQ",
> "QLINK1_EN",
> "QLINK1_WMSS_RESET_N",
It's pretty logical as 1 III has WLC (WireLess Charging), and an
additional 3D iToF sensor. As for QLINK, no idea.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116123612.34302-3-konrad.dybcio@linaro.org
|
|
Add and configure the SDHCI host responsible for (mostly) SD Card and
its corresponding pins' sleep states.
The setup is *literally* 1:1 with 8450 (bar SDR50/104 may not be
broken).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116123612.34302-2-konrad.dybcio@linaro.org
|
|
When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indentation
(corresponding to a single tab, which is still to little) was copied
verbatim.
Drop the unnecessary first line break after 'regulator-allowed-modes'
properties and indent the single remaining continuation line properly.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org
|
|
Remove unused and redundant sleep pin control entries as they are
not referenced anywhere in sc7280 based platform's device tree variants.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reported-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1668591184-21099-1-git-send-email-quic_srivasam@quicinc.com
|
