| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislac Petkov:
"Major microcode loader restructuring, cleanup and improvements by
Thomas Gleixner:
- Restructure the code needed for it and add a temporary initrd
mapping on 32-bit so that the loader can access the microcode
blobs. This in itself is a preparation for the next major
improvement:
- Do not load microcode on 32-bit before paging has been enabled.
Handling this has caused an endless stream of headaches, issues,
ugly code and unnecessary hacks in the past. And there really
wasn't any sensible reason to do that in the first place. So switch
the 32-bit loading to happen after paging has been enabled and turn
the loader code "real purrty" again
- Drop mixed microcode steppings loading on Intel - there, a single
patch loaded on the whole system is sufficient
- Rework late loading to track which CPUs have updated microcode
successfully and which haven't, act accordingly
- Move late microcode loading on Intel in NMI context in order to
guarantee concurrent loading on all threads
- Make the late loading CPU-hotplug-safe and have the offlined
threads be woken up for the purpose of the update
- Add support for a minimum revision which determines whether late
microcode loading is safe on a machine and the microcode does not
change software visible features which the machine cannot use
anyway since feature detection has happened already. Roughly, the
minimum revision is the smallest revision number which must be
loaded currently on the system so that late updates can be allowed
- Other nice leanups, fixess, etc all over the place"
* tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
x86/microcode/intel: Add a minimum required revision for late loading
x86/microcode: Prepare for minimal revision check
x86/microcode: Handle "offline" CPUs correctly
x86/apic: Provide apic_force_nmi_on_cpu()
x86/microcode: Protect against instrumentation
x86/microcode: Rendezvous and load in NMI
x86/microcode: Replace the all-in-one rendevous handler
x86/microcode: Provide new control functions
x86/microcode: Add per CPU control field
x86/microcode: Add per CPU result state
x86/microcode: Sanitize __wait_for_cpus()
x86/microcode: Clarify the late load logic
x86/microcode: Handle "nosmt" correctly
x86/microcode: Clean up mc_cpu_down_prep()
x86/microcode: Get rid of the schedule work indirection
x86/microcode: Mop up early loading leftovers
x86/microcode/amd: Use cached microcode for AP load
x86/microcode/amd: Cache builtin/initrd microcode early
x86/microcode/amd: Cache builtin microcode too
x86/microcode/amd: Use correct per CPU ucode_cpu_info
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No pin control core changes this time.
New drivers:
- Realtek RTD family pin control driver and RTD1619B, RTD1319D and
RTD1315E subdrivers
- Nuvoton NPCM8xx combined pin control and GPIO driver
- Amlogic T7 pin control driver
- Renesas RZ/G3S pin control driver
Improvements:
- A number of additional UART groups added to the Mediatek MT7981
driver
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660
- Extra GPIO banks for the Sunxi H616
- MLSP I2C6 function support in Qualcomm MSM8226
- Some __counted_by() annotations for dynamic arrays
- Ongoing work to make remove() return void
- LSBC groups and functions in the Renesas R8A7778"
* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: Use device_get_match_data()
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
pinctrl: renesas: rzn1: Convert to platform remove callback returning void
pinctrl: renesas: rzg2l: Add RZ/G3S support
dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
pinctrl: renesas: rzg2l: Add support for different DS values on different groups
pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
pinctrl: renesas: rzg2l: Index all registers based on port offset
pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
pinctrl: intel: fetch community only when we need it
pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
pinctrl: cherryview: Convert to platform remove callback returning void
pinctrl: sprd-sc9860: Convert to platform remove callback returning void
pinctrl: qcom/msm: Convert to platform remove callback returning void
pinctrl: qcom/lpi: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 6.7-rc1. A bit
bigger than 6.6 this time around, as it coincided with the Outreachy
and mentorship application process, so we got a bunch of new
developers sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the
rtl8192u wireless driver. Both of these were very old and no one was
maintaining them, the wireless driver removal was due to no one using
it anymore, and no hardware to be found, and is part of a larger
effort to remove unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was
dropped, and we are working with the network mainainers to figure out
what tree it will come back in from and who will be responsible for
it, and if it really is being used or not. Odds are it will show up in
a network subsystem pull request after -rc1 is out, but we aren't sure
yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and
structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches
it.)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
staging: vt6655: Type encoding info dropped from variable name "byRxRate"
staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
staging: vt6655: Type encoding info dropped from variable name "byPacketType"
staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
staging: fbtft: Convert to platform remove callback returning void
staging: olpc_dcon: Remove I2C_CLASS_DDC support
staging: vc04_services: use snprintf instead of sprintf
staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Get rid of private VM_FAULT flags
- Add word-at-a-time implementation
- Add DCACHE_WORD_ACCESS support
- Cleanup control register handling
- Disallow CPU hotplug of CPU 0 to simplify its handling complexity,
following a similar restriction in x86
- Optimize pai crypto map allocation
- Update the list of crypto express EP11 coprocessor operation modes
- Fixes and improvements for secure guests AP pass-through
- Several fixes to address incorrect page marking for address
translation with the "cmma no-dat" feature, preventing potential
incorrect guest TLB flushes
- Fix early IPI handling
- Several virtual vs physical address confusion fixes
- Various small fixes and improvements all over the code
* tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
s390/cio: replace deprecated strncpy with strscpy
s390/sclp: replace deprecated strncpy with strtomem
s390/cio: fix virtual vs physical address confusion
s390/cio: export CMG value as decimal
s390: delete the unused store_prefix() function
s390/cmma: fix handling of swapper_pg_dir and invalid_pg_dir
s390/cmma: fix detection of DAT pages
s390/sclp: handle default case in sclp memory notifier
s390/pai_crypto: remove per-cpu variable assignement in event initialization
s390/pai: initialize event count once at initialization
s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection
s390/mm: add missing arch_set_page_dat() call to gmap allocations
s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()
s390/cmma: fix initial kernel address space page table walk
s390/diag: add missing virt_to_phys() translation to diag224()
s390/mm,fault: move VM_FAULT_ERROR handling to do_exception()
s390/mm,fault: remove VM_FAULT_BADMAP and VM_FAULT_BADACCESS
s390/mm,fault: remove VM_FAULT_SIGNAL
s390/mm,fault: remove VM_FAULT_BADCONTEXT
s390/mm,fault: simplify kfence fault handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for KVM running as a nested hypervisor under development
versions of PowerVM, using the new PAPR nested virtualisation API
- Add support for the BPF prog pack allocator
- A rework of the non-server MMU handling to support execute-only on
all platforms
- Some optimisations & cleanups for the powerpc qspinlock code
- Various other small features and fixes
Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.
* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
powerpc/vmcore: Add MMU information to vmcoreinfo
Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
powerpc/bpf: implement bpf_arch_text_copy
powerpc/code-patching: introduce patch_instructions()
powerpc/32s: Implement local_flush_tlb_page_psize()
powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
powerpc/fsl_msi: Use device_get_match_data()
powerpc: Remove cpm_dp...() macros
powerpc/qspinlock: Rename yield_propagate_owner tunable
powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
powerpc/qspinlock: don't propagate the not-sleepy state
powerpc/qspinlock: propagate owner preemptedness rather than CPU number
powerpc/qspinlock: stop queued waiters trying to set lock sleepy
powerpc/perf: Fix disabling BHRB and instruction sampling
powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove eventfs_file descriptor
This is the biggest change, and the second part of making eventfs
create its files dynamically.
In 6.6 the first part was added, and that maintained a one to one
mapping between eventfs meta descriptors and the directories and file
inodes and dentries that were dynamically created. The directories
were represented by a eventfs_inode and the files were represented by
a eventfs_file.
In v6.7 the eventfs_file is removed. As all events have the same
directory make up (sched_switch has an "enable", "id", "format", etc
files), the handing of what files are underneath each leaf eventfs
directory is moved back to the tracing subsystem via a callback.
When an event is added to the eventfs, it registers an array of
evenfs_entry's. These hold the names of the files and the callbacks
to call when the file is referenced. The callback gets the name so
that the same callback may be used by multiple files. The callback
then supplies the filesystem_operations structure needed to create
this file.
This has brought the memory footprint of creating multiple eventfs
instances down by 2 megs each!
- User events now has persistent events that are not associated to a
single processes. These are privileged events that hang around even
if no process is attached to them
- Clean up of seq_buf
There's talk about using seq_buf more to replace strscpy() and
friends. But this also requires some minor modifications of seq_buf
to be able to do this
- Expand instance ring buffers individually
Currently if boot up creates an instance, and a trace event is
enabled on that instance, the ring buffer for that instance and the
top level ring buffer are expanded (1.4 MB per CPU). This wastes
memory as this happens when nothing is using the top level instance
- Other minor clean ups and fixes
* tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
seq_buf: Export seq_buf_puts()
seq_buf: Export seq_buf_putc()
eventfs: Use simple_recursive_removal() to clean up dentries
eventfs: Remove special processing of dput() of events directory
eventfs: Delete eventfs_inode when the last dentry is freed
eventfs: Hold eventfs_mutex when calling callback functions
eventfs: Save ownership and mode
eventfs: Test for ei->is_freed when accessing ei->dentry
eventfs: Have a free_ei() that just frees the eventfs_inode
eventfs: Remove "is_freed" union with rcu head
eventfs: Fix kerneldoc of eventfs_remove_rec()
tracing: Have the user copy of synthetic event address use correct context
eventfs: Remove extra dget() in eventfs_create_events_dir()
tracing: Have trace_event_file have ref counters
seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()
eventfs: Fix typo in eventfs_inode union comment
eventfs: Fix WARN_ON() in create_file_dentry()
powerpc: Remove initialisation of readpos
tracing/histograms: Simplify last_cmd_set()
seq_buf: fix a misleading comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"While the previously announced patch series for converting arch/sh to
device trees is not yet ready for inclusion to mainline and therefore
didn't make it for this pull request, there are still a small number
changes for v6.7 which include one platform (board plus CPU and driver
code) removal plus two fixes.
The removal sent in by Arnd Bergmann concerns the microdev board which
was an early SuperH prototype board that was never used in production.
With the board removed, we were able to drop the now unused code for
the SH4-202 CPU and well as the driver code for the superhyway bus and
a custom implementation for ioport_map() and ioport_unmap() which will
allow us to simplify ioport handling in the future.
Another patch set by Geert Uytterhoeven revives SuperH BIOS
earlyprintk support which got accidentally disabled in
e76fe57447e88916 ("sh: Remove old early serial console code V2"), the
second patch in the series updates the documentation.
Finally, a patch by Masami Hiramatsu fixes a regression reported by
the kernel test robot which uncovered that arch/sh is not implementing
arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local()
instead"
* tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local()
Documentation: kernel-parameters: Add earlyprintk=bios on SH
sh: bios: Revive earlyprintk support
sh: machvec: Remove custom ioport_{un,}map()
sh: Remove superhyway bus support
sh: Remove unused SH4-202 support
sh: Remove stale microdev board
|
|
Pull ARM updates from Russell King:
- fix some kernel-doc warnings
- fix stack depot IRQ stack filter
- cast memset() byte to unsigned char
- explicitly include correct DI includes
- fix ARCH_LOW_ADDRESS_LIMIT with CONFIG_ZONE_DMA
- fix get_user() problems when linker uses a veneer
- make including linux/uaccess.h self-contained on ARM
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9326/1: make <linux/uaccess.h> self-contained for ARM
ARM: 9324/1: fix get_user() broken with veneer
ARM: 9323/1: mm: Fix ARCH_LOW_ADDRESS_LIMIT when CONFIG_ZONE_DMA
ARM: 9322/1: Explicitly include correct DT includes
ARM: 9321/1: memset: cast the constant byte to unsigned char
ARM: 9320/1: fix stack depot IRQ stack filter
ARM: 9319/1: sa1111: fix sa1111_probe kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A few changes, most of them related to fixing warnings when compiling
with "W=1". These follow up Geert's recent changes for M68K for this
too. These ones complete the fixes for the nommu and ColdFire specific
code.
Also a couple of other fixes to improve ROM default addressing and
compiling for the Cleopatra boards.
Summary:
- improve default Kconfig ROM section settings
- fix compilation for some Cleopatra boards
- fixes and cleanups for warnings compiling with 'W=1'"
* tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: 68000: fix warning in timer code
m68k: 68000: fix warnings in 68000 interrupt handling
m68k: coldfire: remove unused variable in MMU code
m68k: coldfire: fix warnings in uboot argument processing
m68k: coldfire: make mcf_maskimr() static
m68k: coldfire: ensure gpio prototypes visible
m68k: coldfire: add and use "vectors.h"
m68knommu: fix compilation for ColdFire/Cleopatra boards
m68knommu: improve config ROM setting defaults
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
|
|
A hwprobe pair key is signed, but the hwprobe vDSO function was
only checking that the upper bound was valid. In order to help
avoid this type of problem in the future, and in anticipation of
this check becoming more complicated with sparse keys, introduce
and use a "key is valid" predicate function for the check.
Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231010165101.14942-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Enable the configs required by the below IP blocks which are
present on RZ/Five SoC:
* ADC
* CANFD
* DMAC
* eMMC/SDHI
* OSTM
* RAVB (+ Micrel PHY)
* RIIC
* RSPI
* SSI (Sound+WM8978 codec)
* Thermal
* USB (PHY/RESET/OTG)
Along with the above some core configs are enabled too,
-> CPU frequency scaling as RZ/Five does support this.
-> MTD is enabled as RSPI can be connected to flash chips
-> Enabled I2C chardev so that it enables userspace to read/write
i2c devices (similar to arm64)
-> Thermal configs as RZ/Five SoC does have thermal unit
-> GPIO regulator as we might have IP blocks for which voltage
levels are controlled by GPIOs
-> OTG configs as RZ/Five USB can support host/function
-> Gadget configs so that we can test USB function (as done in arm64
all the gadget configs are enabled)
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929000704.53217-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sami Tolvanen <samitolvanen@google.com> says:
This series adds Shadow Call Stack (SCS) support for RISC-V. SCS
uses compiler instrumentation to store return addresses in a
separate shadow stack to protect them against accidental or
malicious overwrites. More information about SCS can be found
here:
https://clang.llvm.org/docs/ShadowCallStack.html
Patch 1 is from Deepak, and it simplifies VMAP_STACK overflow
handling by adding support for accessing per-CPU variables
directly in assembly. The patch is included in this series to
make IRQ stack switching cleaner with SCS, and I've simply
rebased it and fixed a couple of minor issues. Patch 2 uses this
functionality to clean up the stack switching by moving duplicate
code into a single function. On RISC-V, the compiler uses the
gp register for storing the current shadow call stack pointer,
which is incompatible with global pointer relaxation. Patch 3
moves global pointer loading into a macro that can be easily
disabled with SCS. Patch 4 implements SCS register loading and
switching, and allows the feature to be enabled, and patch 5 adds
separate per-CPU IRQ shadow call stacks when CONFIG_IRQ_STACKS is
enabled. Patch 6 fixes the backward-edge CFI test in lkdtm for
RISC-V.
Note that this series requires Clang 17. Earlier Clang versions
support SCS on RISC-V, but use the x18 register instead of gp,
which isn't ideal. gcc has SCS support for arm64, but I'm not
aware of plans to support RISC-V. Once the Zicfiss extension is
ratified, it's probably preferable to use hardware-backed shadow
stacks instead of SCS on hardware that supports the extension,
and we may want to consider implementing CONFIG_DYNAMIC_SCS to
patch between the implementation at runtime (similarly to the
arm64 implementation, which switches to SCS when hardware PAC
support isn't available).
* b4-shazam-merge:
lkdtm: Fix CFI_BACKWARD on RISC-V
riscv: Use separate IRQ shadow call stacks
riscv: Implement Shadow Call Stack
riscv: Move global pointer loading to a macro
riscv: Deduplicate IRQ stack switching
riscv: VMAP_STACK overflow detection thread-safe
Link: https://lore.kernel.org/r/20230927224757.1154247-8-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This fixes an encoding issue with T-Head's dcache.cva and fixes the
comment about the T-Head encodings. The first of these was a fix and
got picked up earlier, I'm merging the second on top of it as they touch
the same comment.
* b4-shazam-merge:
riscv: errata: prefix T-Head mnemonics with th.
riscv: errata: fix T-Head dcache.cva encoding
Link: https://lore.kernel.org/r/20230827090813.1353-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
T-Head now maintains some specification for their extended instructions
at [1], in which all instructions are prefixed "th.".
Follow this practice in the kernel comments.
Link: https://github.com/T-head-Semi/thead-extension-spec [1]
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use __generic_cmpxchg_local() for arch_cmpxchg_local() implementation
on SH architecture because it does not implement arch_cmpxchg_local().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310241310.Ir5uukOG-lkp@intel.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/169824660459.24340.14614817132696360531.stgit@devnote2
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
Pull ARM SoC code updates from Arnd Bergmann:
"The AMD Pensando DPU platform gets added to arm64, and some minor
updates make it into Renesas' 32-bit platforms"
* tag 'soc-arm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5}
arm64: Add config for AMD Pensando SoC platforms
MAINTAINERS: Add entry for AMD PENSANDO
ARM: shmobile: sh73a0: Reserve boot area when SMP is enabled
ARM: shmobile: r8a7779: Reserve boot area when SMP is enabled
ARM: shmobile: rcar-gen2: Reserve boot area when SMP is enabled
ARM: shmobile: rcar-gen2: Remove unneeded once handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"These are the usual trivial changes to enable a couple of newly added
device drivers and remove lines for Kconfig options that are no longer
needed"
* tag 'soc-defconfig-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: enable DisplayPort altmode support
arm64: defconfig: enable CONFIG_TYPEC_QCOM_PMIC
arm64: defconfig: add various drivers for Amlogic based boards
ARM: config: aspeed: Remove FIRMWARE_MEMMAP
ARM: config: aspeed_g5: Enable SSIF BMC driver
ARM: config: aspeed: Add Ampere SMPro drivers
ARM: config: aspeed: Add new FSI drivers
arm64: defconfig: Enable TPS6593 PMIC for SK-AM62A
ARM: exynos_defconfig: add driver for ISL29018
ARM: multi_v7_defconfig: add drivers for S5C73M3 & S5K6A3 camera sensors
arm64: defconfig: Enable RZ/G3S (R9A08G045) SoC
ARM: multi_v7_defconfig: add tm2-touchkey driver
ARM: exynos_defconfig: replace SATA_AHCI_PLATFORM with AHCI_DWC driver
ARM: multi_v7_defconfig: add AHCI_DWC driver
ARM: multi_v7_defconfig: make Exynos related PHYs modules
ARM: s5pv210_defconfig: enable IIO required by MAX17040
ARM: shmobile: defconfig: Refresh for v6.6-rc3
ARM: defconfig: cleanup orphaned CONFIGs
arm64: defconfig: Enable Samsung DSIM driver
arm64: defconfig: Enable CONFIG_USB_MASS_STORAGE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"There are a couple new SoCs that are supported for the first time:
- AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
cores
- Sophgo makes RISC-V based chips, and we now support the CV1800B
chip used in the milkv-duo board and the massive sg2042 chip in the
milkv-pioneer, a 64-core developer workstation.
- Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
7c and gets added with some Xiaomi phones
- Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
and the RZ/G3S (R9A08G045) embedded SoC.
There are also a bunch of newly supported machines that use already
supported chips. On the 32-bit side, we have:
- USRobotics USR8200 is a NAS/Firewall/router based on the ancient
Intel IXP4xx platform
- A couple of machines based on the NXP i.MX5 and i.MX6 platforms
- One machine each for Allwinner V3s, Aspeed AST2600, Microchip
sama5d29 and ST STM32mp157
The other ones all use arm64 cores on chips from allwinner, amlogic,
freescale, mediatek, qualcomm and rockchip"
* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
arm64: dts: socionext: add missing cache properties
riscv: dts: thead: convert isa detection to new properties
arm64: dts: Update cache properties for socionext
arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
arm64: dts: ti: k3-am62p: Add nodes for more IPs
arm64: dts: rockchip: Add Turing RK1 SoM support
dt-bindings: arm: rockchip: Add Turing RK1
dt-bindings: vendor-prefixes: add turing
arm64: dts: rockchip: Add DFI to rk3588s
arm64: dts: rockchip: Add DFI to rk356x
arm64: dts: rockchip: Always enable DFI on rk3399
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- get rid of the fake support for coherent DMA allocation on coldfire
with caches (Christoph Hellwig)
- add a few Kconfig dependencies so that Kconfig catches the use of
invalid configurations (Christoph Hellwig)
- fix a type in dma-debug output (Chuck Lever)
- rewrite a comment in swiotlb (Sean Christopherson)
* tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: Fix a typo in a debugging eye-catcher
swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
m68k: remove unused includes from dma.c
m68k: don't provide arch_dma_alloc for nommu/coldfire
net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
m68k: use the coherent DMA code for coldfire without data cache
dma-direct: warn when coherent allocations aren't supported
dma-direct: simplify the use atomic pool logic in dma_direct_alloc
dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL
|
|
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The majority of this is a rework of the assembly and C wrappers that
are used to talk to the TDX module and VMM. This is a nice cleanup in
general but is also clearing the way for using this code when Linux is
the TDX VMM.
There are also some tidbits to make TDX guests play nicer with Hyper-V
and to take advantage the hardware TSC.
Summary:
- Refactor and clean up TDX hypercall/module call infrastructure
- Handle retrying/resuming page conversion hypercalls
- Make sure to use the (shockingly) reliable TSC in TDX guests"
[ TLA reminder: TDX is "Trust Domain Extensions", Intel's guest VM
confidentiality technology ]
* tag 'x86_tdx_for_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Mark TSC reliable
x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed()
x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP
x86/virt/tdx: Wire up basic SEAMCALL functions
x86/tdx: Remove 'struct tdx_hypercall_args'
x86/tdx: Reimplement __tdx_hypercall() using TDX_MODULE_CALL asm
x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL
x86/tdx: Extend TDX_MODULE_CALL to support more TDCALL/SEAMCALL leafs
x86/tdx: Pass TDCALL/SEAMCALL input/output registers via a structure
x86/tdx: Rename __tdx_module_call() to __tdcall()
x86/tdx: Make macros of TDCALLs consistent with the spec
x86/tdx: Skip saving output regs when SEAMCALL fails with VMFailInvalid
x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro
x86/tdx: Retry partially-completed page conversion hypercalls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Usual fixes and updates:
- Add up to 12 nops after TLB inserts for PA8x00 CPUs as the
specification requires (Dave Anglin)
- Simplify the parisc smp_prepare_boot_cpu() code (Russell King)
- Use 64-bit little-endian values in SBA IOMMU PDIR table for AGP
Since there is upcoming support for booting a 64-bit kernel on QEMU,
some corner cases were fixed and improvements added:
- Fix 64-bit kernel crash in STI (graphics console) font setup code
which miscalculated the font start address as it gets signed vs
unsigned offsets wrong
- Support building an uncompressed Linux kernel
- Add support for soft power-off in qemu"
* tag 'parisc-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
fbdev: stifb: Make the STI next font pointer a 32-bit signed offset
parisc: Show default CPU PSW.W setting as reported by PDC
parisc/pdc: Add width field to struct pdc_model
parisc: Add nop instructions after TLB inserts
parisc: simplify smp_prepare_boot_cpu()
parisc/agp: Use 64-bit LE values in SBA IOMMU PDIR table
parisc/firmware: Use PDC constants for narrow/wide firmware
parisc: Move parisc_narrow_firmware variable to header file
parisc/power: Trivial whitespace cleanups and license update
parisc/power: Add power soft-off when running on qemu
parisc: Allow building uncompressed Linux kernel
parisc: Add some missing PDC functions and constants
parisc: sba-iommu: Fix comment when calculating IOC number
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- misc aesthetical improvements for the floating point emulator
- remove the last user of strlcpy()
- use kernel's generic libgcc functions
- misc fixes for W=1 builds
- misc indentation fixes
- misc fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (72 commits)
m68k: lib: Include <linux/libgcc.h> for __muldi3()
m68k: fpsp040: Fix indentation by 5 spaces
m68k: Fix indentation by 2 or 5 spaces in <asm/page_mm.h>
m68k: kernel: Fix indentation by 7 spaces in traps.c
m68k: sun3: Fix indentation by 5 or 7 spaces
m68k: Fix indentation by 7 spaces in <asm/io_mm.h>
m68k: defconfig: Update virt_defconfig for v6.6-rc3
m68k: defconfig: Update defconfigs for v6.6-rc1
m68k: io: Mark mmio read addresses as const
m68k: Replace GPL 2.0+ README.legal boilerplate with SPDX
m68k: sun3: Change led_pattern[] to unsigned char
m68k: Add missing types to asm/irq.h
m68k: sun3/3x: Add and use "sun3.h"
m68k: sun3x: Make dvma_print() static
m68k: sun3x: Make sun3x_halt() static
m68k: sun3x: Do not mark dvma_map_iommu() inline
m68k: sun3x: Fix signature of sun3_leds()
m68k: sun3: Make sun3_platform_init() static
m68k: sun3: Make print_pte() static
m68k: sun3: Annotate prom_printf() with __printf()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
|
Now that trap support is ready to handle misalignment errors in S-mode,
allow the user to control the behavior of misaligned accesses using
prctl(PR_SET_UNALIGN). Add an align_ctl flag in thread_struct which
will be used to determine if we should SIGBUS the process or not on
such fault.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-9-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
hwprobe provides a way to report if misaligned access are emulated. In
order to correctly populate that feature, we can check if it actually
traps when doing a misaligned access. This can be checked using an
exception table entry which will actually be used when a misaligned
access is done from kernel mode.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-8-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This function is solely called as an initcall, thus annotate it with
__init.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-7-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This sysctl tuning option allows the user to disable misaligned access
handling globally on the system. This will also be used by misaligned
detection code to temporarily disable misaligned access handling.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-6-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This support is partially based of openSBI misaligned emulation floating
point instruction support. It provides support for the existing
floating point instructions (both for 32/64 bits as well as compressed
ones). Since floating point registers are not part of the pt_regs
struct, we need to modify them directly using some assembly. We also
dirty the pt_regs status in case we modify them to be sure context
switch will save FP state. With this support, Linux is on par with
openSBI support.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-5-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add missing calls to account for misaligned fault event using
perf_sw_event().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Misalignment trap handling is only supported for M-mode and uses direct
accesses to user memory. In S-mode, when handling usermode fault, this
requires to use the get_user()/put_user() accessors. Implement
load_u8(), store_u8() and get_insn() using these accessors for
userspace and direct text access for kernel.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-3-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Replace macros by the only two function calls that are done from this
file, store_u8() and load_u8().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We don't have any new drivers. The loongson driver is getting extended
with support for new models. There's a big refactor of gpio-pca953x
and many small improvements to others.
The GPIO code in the kernel has acquired a lot of cruft over the years
as well as many abusers of the API across the kernel tree. This
release cycle we have started a major cleanup and improvement effort
that will most likely span several releases. We have started by
converting external users of struct gpio_chip to accessing the wrapper
around it - struct gpio_device. This is because the latter is
reference counted while the former is removed when the provider is
unbound. We also removed several instances of drivers accessing
private GPIOLIB structures and including the private header from
drivers/gpio/.
To that end you'll see several commits aimed at different subsystems
(acked by relevant maintainers) as well as two merges from the
x86/platform tree.
We'll then rework the locking in GPIOLIB which currently uses a big
spinlock for many different things and could use becoming more
fine-grained, especially as it doesn't even get the locking right.
We'll also use SRCU for protecting the gpio_chip pointer against
in-kernel hot-unplug crashes similar to what we saw triggered from
user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
is still vulnerable to these use-cases. I'm just mentioning the plans
here, this is not part of this PR.
You'll see some new instances of using __free(). We've added a
gpio_device_put cleanup helper similar to the put_device one
introduced by Peter Zijlstra and used it according to the preferred
pattern except where it didn't make sense.
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private
gpio_chip structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO
code
- while there are still external users accessing struct gpio_chip,
let's make gpiochip_get_desc() public so that they at least use the
preferred helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need
them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that
still don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
use cleanup helpers, use dev_err_probe() where it makes sense,
fully convert to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing
properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers"
* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
hte: tegra194: add GPIOLIB dependency
hte: tegra194: don't access struct gpio_chip
gpiolib: provide gpio_device_get_base()
i2c: mux: gpio: don't fiddle with GPIOLIB internals
gpiolib: provide gpiod_to_gpio_device()
gpiolib: provide gpio_device_to_device()
gpio: hisi: Fix format specifier
gpiolib: provide gpio_device_find_by_fwnode()
gpio: acpi: remove acpi_get_and_request_gpiod()
gpio: Use device_get_match_data()
gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
platform/x86: int3472: Switch to devm_get_gpiod()
platform/x86: int3472: Stop using gpiod_toggle_active_low()
platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
gpio: vf610: simplify code by dropping data check
gpio: vf610: add i.MX8ULP of_device_id entry
dt-bindings: gpio: vf610: add i.MX95 compatible
dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
dt-bindings: gpio: vf610: update gpio-ranges
...
|
|
LoongArch architecture changes for 6.7 (BPF CPU v4 support) depend on
the bpf changes to fix conflictions in selftests and work, so merge them
to create a base.
|
