summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2023-11-28parisc/pgtable: Do not drop upper 5 address bits of physical addressHelge Deller
commit 166b0110d1ee53290bd11618df6e3991c117495a upstream. When calculating the pfn for the iitlbt/idtlbt instruction, do not drop the upper 5 address bits. This doesn't seem to have an effect on physical hardware which uses less physical address bits, but in qemu the missing bits are visible. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28parisc: Prevent booting 64-bit kernels on PA1.x machinesHelge Deller
commit a406b8b424fa01f244c1aab02ba186258448c36b upstream. Bail out early with error message when trying to boot a 64-bit kernel on 32-bit machines. This fixes the previous commit to include the check for true 64-bit kernels as well. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 591d2108f3abc ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines") Cc: <stable@vger.kernel.org> # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28parisc/pdc: Add width field to struct pdc_modelHelge Deller
commit 6240553b52c475d9fc9674de0521b77e692f3764 upstream. PDC2.0 specifies the additional PSW-bit field. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28KVM: x86: Ignore MSR_AMD64_TW_CFG accessMaciej S. Szmigiero
commit 2770d4722036d6bd24bcb78e9cd7f6e572077d03 upstream. Hyper-V enabled Windows Server 2022 KVM VM cannot be started on Zen1 Ryzen since it crashes at boot with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED + STATUS_PRIVILEGED_INSTRUCTION (in other words, because of an unexpected #GP in the guest kernel). This is because Windows tries to set bit 8 in MSR_AMD64_TW_CFG and can't handle receiving a #GP when doing so. Give this MSR the same treatment that commit 2e32b7190641 ("x86, kvm: Add MSR_AMD64_BU_CFG2 to the list of ignored MSRs") gave MSR_AMD64_BU_CFG2 under justification that this MSR is baremetal-relevant only. Although apparently it was then needed for Linux guests, not Windows as in this case. With this change, the aforementioned guest setup is able to finish booting successfully. This issue can be reproduced either on a Summit Ridge Ryzen (with just "-cpu host") or on a Naples EPYC (with "-cpu host,stepping=1" since EPYC is ordinarily stepping 2). Alternatively, userspace could solve the problem by using MSR filters, but forcing every userspace to define a filter isn't very friendly and doesn't add much, if any, value. The only potential hiccup is if one of these "baremetal-only" MSRs ever requires actual emulation and/or has F/M/S specific behavior. But if that happens, then KVM can still punt *that* handling to userspace since userspace MSR filters "win" over KVM's default handling. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1ce85d9c7c9e9632393816cf19c902e0a3f411f1.1697731406.git.maciej.szmigiero@oracle.com [sean: call out MSR filtering alternative] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28ARM: 9320/1: fix stack depot IRQ stack filterVincent Whitchurch
[ Upstream commit b0150014878c32197cfa66e3e2f79e57f66babc0 ] Place IRQ handlers such as gic_handle_irq() in the irqentry section even if FUNCTION_GRAPH_TRACER is not enabled. Without this, the stack depot's filter_irq_stacks() does not correctly filter out IRQ stacks in those configurations, which hampers deduplication and eventually leads to "Stack depot reached limit capacity" splats with KASAN. A similar fix was done for arm64 in commit f6794950f0e5ba37e3bbed ("arm64: set __exception_irq_entry with __irq_entry as a default"). Link: https://lore.kernel.org/r/20230803-arm-irqentry-v1-1-8aad8e260b1c@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28x86/mm: Drop the 4 MB restriction on minimal NUMA node memory sizeMike Rapoport (IBM)
[ Upstream commit a1e2b8b36820d8c91275f207e77e91645b7c6836 ] Qi Zheng reported crashes in a production environment and provided a simplified example as a reproducer: | For example, if we use Qemu to start a two NUMA node kernel, | one of the nodes has 2M memory (less than NODE_MIN_SIZE), | and the other node has 2G, then we will encounter the | following panic: | | BUG: kernel NULL pointer dereference, address: 0000000000000000 | <...> | RIP: 0010:_raw_spin_lock_irqsave+0x22/0x40 | <...> | Call Trace: | <TASK> | deactivate_slab() | bootstrap() | kmem_cache_init() | start_kernel() | secondary_startup_64_no_verify() The crashes happen because of inconsistency between the nodemask that has nodes with less than 4MB as memoryless, and the actual memory fed into the core mm. The commit: 9391a3f9c7f1 ("[PATCH] x86_64: Clear more state when ignoring empty node in SRAT parsing") ... that introduced minimal size of a NUMA node does not explain why a node size cannot be less than 4MB and what boot failures this restriction might fix. Fixes have been submitted to the core MM code to tighten up the memory topologies it accepts and to not crash on weird input: mm: page_alloc: skip memoryless nodes entirely mm: memory_hotplug: drop memoryless node from fallback lists Andrew has accepted them into the -mm tree, but there are no stable SHA1's yet. This patch drops the limitation for minimal node size on x86: - which works around the crash without the fixes to the core MM. - makes x86 topologies less weird, - removes an arbitrary and undocumented limitation on NUMA topologies. [ mingo: Improved changelog clarity. ] Reported-by: Qi Zheng <zhengqi.arch@bytedance.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Link: https://lore.kernel.org/r/ZS+2qqjEO5/867br@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20sh: bios: Revive earlyprintk supportGeert Uytterhoeven
[ Upstream commit 553f7ac78fbb41b2c93ab9b9d78e42274d27daa9 ] The SuperH BIOS earlyprintk code is protected by CONFIG_EARLY_PRINTK. However, when this protection was added, it was missed that SuperH no longer defines an EARLY_PRINTK config symbol since commit e76fe57447e88916 ("sh: Remove old early serial console code V2"), so BIOS earlyprintk can no longer be used. Fix this by reviving the EARLY_PRINTK config symbol. Fixes: d0380e6c3c0f6edb ("early_printk: consolidate random copies of identical code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/c40972dfec3dcc6719808d5df388857360262878.1697708489.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20ARM: 9321/1: memset: cast the constant byte to unsigned charKursad Oney
[ Upstream commit c0e824661f443b8cab3897006c1bbc69fd0e7bc4 ] memset() description in ISO/IEC 9899:1999 (and elsewhere) says: The memset function copies the value of c (converted to an unsigned char) into each of the first n characters of the object pointed to by s. The kernel's arm32 memset does not cast c to unsigned char. This results in the following code to produce erroneous output: char a[128]; memset(a, -128, sizeof(a)); This is because gcc will generally emit the following code before it calls memset() : mov r0, r7 mvn r1, #127 ; 0x7f bl 00000000 <memset> r1 ends up with 0xffffff80 before being used by memset() and the 'a' array will have -128 once in every four bytes while the other bytes will be set incorrectly to -1 like this (printing the first 8 bytes) : test_module: -128 -1 -1 -1 test_module: -1 -1 -1 -128 The change here is to 'and' r1 with 255 before it is used. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20ARM: dts: qcom: mdm9615: populate vsdcc fixed regulatorKrzysztof Kozlowski
[ Upstream commit 09f8ee81b6da5f76de8b83c8bfc4475b54e101e0 ] Fixed regulator put under "regulators" node will not be populated, unless simple-bus or something similar is used. Drop the "regulators" wrapper node to fix this. Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08x86: Fix .brk attribute in linker scriptJuergen Gross
commit 7e09ac27f43b382f5fe9bb7c7f4c465ece1f8a23 upstream. Commit in Fixes added the "NOLOAD" attribute to the .brk section as a "failsafe" measure. Unfortunately, this leads to the linker no longer covering the .brk section in a program header, resulting in the kernel loader not knowing that the memory for the .brk section must be reserved. This has led to crashes when loading the kernel as PV dom0 under Xen, but other scenarios could be hit by the same problem (e.g. in case an uncompressed kernel is used and the initrd is placed directly behind it). So drop the "NOLOAD" attribute. This has been verified to correctly cover the .brk section by a program header of the resulting ELF file. Fixes: e32683c6f7d2 ("x86/mm: Fix RESERVE_BRK() for older binutils") Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20220630071441.28576-4-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08x86/mm: Fix RESERVE_BRK() for older binutilsJosh Poimboeuf
commit e32683c6f7d22ba624e0bfc58b02cf3348bdca63 upstream. With binutils 2.26, RESERVE_BRK() causes a build failure: /tmp/ccnGOKZ5.s: Assembler messages: /tmp/ccnGOKZ5.s:98: Error: missing ')' /tmp/ccnGOKZ5.s:98: Error: missing ')' /tmp/ccnGOKZ5.s:98: Error: missing ')' /tmp/ccnGOKZ5.s:98: Error: junk at end of line, first unrecognized character is `U' The problem is this line: RESERVE_BRK(early_pgt_alloc, INIT_PGT_BUF_SIZE) Specifically, the INIT_PGT_BUF_SIZE macro which (via PAGE_SIZE's use _AC()) has a "1UL", which makes older versions of the assembler unhappy. Unfortunately the _AC() macro doesn't work for inline asm. Inline asm was only needed here to convince the toolchain to add the STT_NOBITS flag. However, if a C variable is placed in a section whose name is prefixed with ".bss", GCC and Clang automatically set STT_NOBITS. In fact, ".bss..page_aligned" already relies on this trick. So fix the build failure (and simplify the macro) by allocating the variable in C. Also, add NOLOAD to the ".brk" output section clause in the linker script. This is a failsafe in case the ".bss" prefix magic trick ever stops working somehow. If there's a section type mismatch, the GNU linker will force the ".brk" output section to be STT_NOBITS. The LLVM linker will fail with a "section type mismatch" error. Note this also changes the name of the variable from .brk.##name to __brk_##name. The variable names aren't actually used anywhere, so it's harmless. Fixes: a1e2c031ec39 ("x86/mm: Simplify RESERVE_BRK()") Reported-by: Joe Damato <jdamato@fastly.com> Reported-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://lore.kernel.org/r/22d07a44c80d8e8e1e82b9a806ddc8c6bbb2606e.1654759036.git.jpoimboe@kernel.org [nathan: Fix conflict due to lack of 360db4ace311 and resolve silent conflict with 360db4ace3117] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08x86/mm: Simplify RESERVE_BRK()Josh Poimboeuf
commit a1e2c031ec3949b8c039b739c0b5bf9c30007b00 upstream. RESERVE_BRK() reserves data in the .brk_reservation section. The data is initialized to zero, like BSS, so the macro specifies 'nobits' to prevent the data from taking up space in the vmlinux binary. The only way to get the compiler to do that (without putting the variable in .bss proper) is to use inline asm. The macro also has a hack which encloses the inline asm in a discarded function, which allows the size to be passed (global inline asm doesn't allow inputs). Remove the need for the discarded function hack by just stringifying the size rather than supplying it as an input to the inline asm. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220506121631.133110232@infradead.org [nathan: Fix conflict due to lack of 2b6ff7dea670 and 33def8498fdd] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08arm64: fix a concurrency issue in emulation_proc_handler()Jinjie Ruan
In linux-6.1, the related code is refactored in commit 124c49b1b5d9 ("arm64: armv8_deprecated: rework deprected instruction handling") and this issue was incidentally fixed. I have adapted the patch set to linux stable 5.10. However, 4.19 and 5.10 are too different and the patch set is hard to adapt to 4.19. This patch is to solve the problem of repeated addition of linked lists described below with few changes. How to reproduce: CONFIG_ARMV8_DEPRECATED=y, CONFIG_SWP_EMULATION=y, and CONFIG_DEBUG_LIST=y, then launch two shell executions: #!/bin/bash while [ 1 ]; do echo 1 > /proc/sys/abi/swp done or "echo 1 > /proc/sys/abi/swp" and then aunch two shell executions: #!/bin/bash while [ 1 ]; do echo 0 > /proc/sys/abi/swp done In emulation_proc_handler(), read and write operations are performed on insn->current_mode. In the concurrency scenario, mutex only protects writing insn->current_mode, and not protects the read. Suppose there are two concurrent tasks, task1 updates insn->current_mode to INSN_EMULATE in the critical section, the prev_mode of task2 is still the old data INSN_UNDEF of insn->current_mode. As a result, two tasks call update_insn_emulation_mode twice with prev_mode = INSN_UNDEF and current_mode = INSN_EMULATE, then call register_emulation_hooks twice, resulting in a list_add double problem. After applying this patch, the following list add or list del double warnings never occur. Call trace: __list_add_valid+0xd8/0xe4 register_undef_hook+0x94/0x13c update_insn_emulation_mode+0xd0/0x12c emulation_proc_handler+0xd8/0xf4 proc_sys_call_handler+0x140/0x250 proc_sys_write+0x1c/0x2c new_sync_write+0xec/0x18c vfs_write+0x214/0x2ac ksys_write+0x70/0xfc __arm64_sys_write+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Call trace: __list_del_entry_valid+0xac/0x110 unregister_undef_hook+0x34/0x80 update_insn_emulation_mode+0xf0/0x180 emulation_proc_handler+0x8c/0xd8 proc_sys_call_handler+0x1d8/0x208 proc_sys_write+0x14/0x20 new_sync_write+0xf0/0x190 vfs_write+0x304/0x388 ksys_write+0x6c/0x100 __arm64_sys_write+0x1c/0x28 el0_svc_common.constprop.4+0x68/0x188 do_el0_svc+0x24/0xa0 el0_svc+0x14/0x20 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Fixes: af483947d472 ("arm64: fix oops in concurrently setting insn_emulation sysctls") Cc: stable@vger.kernel.org#4.19.x Cc: gregkh@linuxfoundation.org Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08ARM: 8933/1: replace Sun/Solaris style flag on section directiveNick Desaulniers
[ Upstream commit 790756c7e0229dedc83bf058ac69633045b1000e ] It looks like a section directive was using "Solaris style" to declare the section flags. Replace this with the GNU style so that Clang's integrated assembler can assemble this directive. The modified instances were identified via: $ ag \.section | grep # Link: https://ftp.gnu.org/old-gnu/Manuals/gas-2.9.1/html_chapter/as_7.html#SEC119 Link: https://github.com/ClangBuiltLinux/linux/issues/744 Link: https://bugs.llvm.org/show_bug.cgi?id=43759 Link: https://reviews.llvm.org/D69296 Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Fangrui Song <maskray@google.com> Suggested-by: Jian Cai <jiancai@google.com> Suggested-by: Peter Smith <peter.smith@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibilityThomas Gleixner
commit 128b0c9781c9f2651bea163cb85e52a6c7be0f9e upstream. David and a few others reported that on certain newer systems some legacy interrupts fail to work correctly. Debugging revealed that the BIOS of these systems leaves the legacy PIC in uninitialized state which makes the PIC detection fail and the kernel switches to a dummy implementation. Unfortunately this fallback causes quite some code to fail as it depends on checks for the number of legacy PIC interrupts or the availability of the real PIC. In theory there is no reason to use the PIC on any modern system when IO/APIC is available, but the dependencies on the related checks cannot be resolved trivially and on short notice. This needs lots of analysis and rework. The PIC detection has been added to avoid quirky checks and force selection of the dummy implementation all over the place, especially in VM guest scenarios. So it's not an option to revert the relevant commit as that would break a lot of other scenarios. One solution would be to try to initialize the PIC on detection fail and retry the detection, but that puts the burden on everything which does not have a PIC. Fortunately the ACPI/MADT table header has a flag field, which advertises in bit 0 that the system is PCAT compatible, which means it has a legacy 8259 PIC. Evaluate that bit and if set avoid the detection routine and keep the real PIC installed, which then gets initialized (for nothing) and makes the rest of the code with all the dependencies work again. Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately") Reported-by: David Lazar <dlazar@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David Lazar <dlazar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003 Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25s390/pci: fix iommu bitmap allocationNiklas Schnelle
commit c1ae1c59c8c6e0b66a718308c623e0cb394dab6b upstream. Since the fixed commits both zdev->iommu_bitmap and zdev->lazy_bitmap are allocated as vzalloc(zdev->iommu_pages / 8). The problem is that zdev->iommu_bitmap is a pointer to unsigned long but the above only yields an allocation that is a multiple of sizeof(unsigned long) which is 8 on s390x if the number of IOMMU pages is a multiple of 64. This in turn is the case only if the effective IOMMU aperture is a multiple of 64 * 4K = 256K. This is usually the case and so didn't cause visible issues since both the virt_to_phys(high_memory) reduced limit and hardware limits use nice numbers. Under KVM, and in particular with QEMU limiting the IOMMU aperture to the vfio DMA limit (default 65535), it is possible for the reported aperture not to be a multiple of 256K however. In this case we end up with an iommu_bitmap whose allocation is not a multiple of 8 causing bitmap operations to access it out of bounds. Sadly we can't just fix this in the obvious way and use bitmap_zalloc() because for large RAM systems (tested on 8 TiB) the zdev->iommu_bitmap grows too large for kmalloc(). So add our own bitmap_vzalloc() wrapper. This might be a candidate for common code, but this area of code will be replaced by the upcoming conversion to use the common code DMA API on s390 so just add a local routine. Fixes: 224593215525 ("s390/pci: use virtual memory for iommu bitmap") Fixes: 13954fd6913a ("s390/pci_dma: improve lazy flush for unmap") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphoneTony Lindgren
[ Upstream commit 5ad37b5e30433afa7a5513e3eb61f69fa0976785 ] On mapphone devices we may get lots of noise on the micro-USB port in debug uart mode until the phy-cpcap-usb driver probes. Let's limit the noise by using overrun-throttle-ms. Note that there is also a related separate issue where the charger cable connected may cause random sysrq requests until phy-cpcap-usb probes that still remains. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25KVM: x86: Mask LVTPC when handling a PMIJim Mattson
commit a16eb25b09c02a54c1c1b449d4b6cfa2cf3f013a upstream. Per the SDM, "When the local APIC handles a performance-monitoring counters interrupt, it automatically sets the mask flag in the LVT performance counter register." Add this behavior to KVM's local APIC emulation. Failure to mask the LVTPC entry results in spurious PMIs, e.g. when running Linux as a guest, PMI handlers that do a "late_ack" spew a large number of "dazed and confused" spurious NMI warnings. Fixes: f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests") Cc: stable@vger.kernel.org Signed-off-by: Jim Mattson <jmattson@google.com> Tested-by: Mingwei Zhang <mizhang@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Link: https://lore.kernel.org/r/20230925173448.3518223-3-mizhang@google.com [sean: massage changelog, correct Fixes] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25x86/alternatives: Disable KASAN in apply_alternatives()Kirill A. Shutemov
commit d35652a5fc9944784f6f50a5c979518ff8dacf61 upstream. Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ] Fixes: 6657fca06e3f ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y") Reported-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()Christophe Leroy
[ Upstream commit 5ea0bbaa32e8f54e9a57cfee4a3b8769b80be0d2 ] Commit 45201c879469 ("powerpc/nohash: Remove hash related code from nohash headers.") replaced: if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) return 0; By: if (pte_young(*ptep)) return 0; But it should be: if (!pte_young(*ptep)) return 0; Fix it. Fixes: 45201c879469 ("powerpc/nohash: Remove hash related code from nohash headers.") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/8bb7f06494e21adada724ede47a4c3d97e879d40.1695659959.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUsBorislav Petkov (AMD)
commit f454b18e07f518bcd0c05af17a2239138bff52de upstream. Fix erratum #1485 on Zen4 parts where running with STIBP disabled can cause an #UD exception. The performance impact of the fix is negligible. Reported-by: René Rebe <rene@exactcode.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: René Rebe <rene@exactcode.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/D99589F4-BC5D-430B-87B2-72C20370CF57@exactcode.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10parisc: Restore __ldcw_align for PA-RISC 2.0 processorsJohn David Anglin
commit 914988e099fc658436fbd7b8f240160c352b6552 upstream. Back in 2005, Kyle McMartin removed the 16-byte alignment for ldcw semaphores on PA 2.0 machines (CONFIG_PA20). This broke spinlocks on pre PA8800 processors. The main symptom was random faults in mmap'd memory (e.g., gcc compilations, etc). Unfortunately, the errata for this ldcw change is lost. The issue is the 16-byte alignment required for ldcw semaphore instructions can only be reduced to natural alignment when the ldcw operation can be handled coherently in cache. Only PA8800 and PA8900 processors actually support doing the operation in cache. Aligning the spinlock dynamically adds two integer instructions to each spinlock. Tested on rp3440, c8000 and a500. Signed-off-by: John David Anglin <dave.anglin@bell.net> Link: https://lore.kernel.org/linux-parisc/6b332788-2227-127f-ba6d-55e99ecf4ed8@bell.net/T/#t Link: https://lore.kernel.org/linux-parisc/20050609050702.GB4641@roadwarrior.mcmartin.ca/ Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10parisc: irq: Make irq_stack_union static to avoid sparse warningHelge Deller
[ Upstream commit b1bef1388c427cdad7331a9c8eb4ebbbe5b954b0 ] Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10parisc: drivers: Fix sparse warningHelge Deller
[ Upstream commit b137b9d60b8add5620a06c687a71ce18776730b0 ] Fix "warning: directive in macro's argument list" warning. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10parisc: sba: Fix compile warning wrt list of SBA devicesHelge Deller
[ Upstream commit eb3255ee8f6f4691471a28fbf22db5e8901116cd ] Fix this makecheck warning: drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list' was not declared. Should it be static? Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on bootTony Lindgren
[ Upstream commit ac08bda1569b06b7a62c7b4dd00d4c3b28ceaaec ] Commit 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") attempted to fix the PWM settings but ended up causin an additional clock reparenting error: clk: failed to reparent abe-clkctrl:0060:24 to sys_clkin_ck: -22 Only timer9 is in the PER domain and can use the sys_clkin_ck clock source. For timer8, the there is no sys_clkin_ck available as it's in the ABE domain, instead it should use syc_clk_div_ck. However, for power management, we want to use the always on sys_32k_ck instead. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") Depends-on: 61978617e905 ("ARM: dts: Add minimal support for Droid Bionic xt875") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabledChristoph Hellwig
[ Upstream commit ef8f8f04a0b25e8f294b24350e8463a8d6a9ba0b ] While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") to be built in, it can still build a kernel without MMC support and thuse no mmc_detect_change symbol at all. Add ifdefs to build the mmc support code in the alchemy arch code conditional on mmc support. Fixes: d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10powerpc/perf/hv-24x7: Update domain value checkKajol Jain
[ Upstream commit 4ff3ba4db5943cac1045e3e4a3c0463ea10f6930 ] Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But the check for domain value 0 is missing. Fix this issue by adding check for domain value 0. Before: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Error: The sys_perf_event_open() syscall returned with 5 (Input/output error) for event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/). /bin/dmesg | grep -i perf may provide additional information. Result from dmesg: [ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret 0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0 After: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Warning: hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel. failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements") Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23powerpc/pseries: fix possible memory leak in ibmebus_bus_init()ruanjinjie
[ Upstream commit afda85b963c12947e298ad85d757e333aa40fd74 ] If device_register() returns error in ibmebus_bus_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23hw_breakpoint: fix single-stepping when using bpf_overflow_handlerTomislav Novak
[ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ] Arm platforms use is_default_overflow_handler() to determine if the hw_breakpoint code should single-step over the breakpoint trigger or let the custom handler deal with it. Since bpf_overflow_handler() currently isn't recognized as a default handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes it to keep firing (the instruction triggering the data abort exception is never skipped). For example: # bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test Attaching 1 probe... hit hit [...] ^C (./test performs a single 4-byte store to 0x10000) This patch replaces the check with uses_default_overflow_handler(), which accounts for the bpf_overflow_handler() case by also testing if one of the perf_event_output functions gets invoked indirectly, via orig_default_handler. Signed-off-by: Tomislav Novak <tnovak@meta.com> Tested-by: Samuel Gosselin <sgosselin@google.com> # arm64 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/ Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23parisc: Drop loops_per_jiffy from per_cpu structHelge Deller
commit 93346da8ff47cc00f953c7f38a2d6ba11977fc42 upstream. There is no need to keep a loops_per_jiffy value per cpu. Drop it. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23x86/virt: Drop unnecessary check on extended CPUID level in cpu_has_svm()Sean Christopherson
[ Upstream commit 5df8ecfe3632d5879d1f154f7aa8de441b5d1c89 ] Drop the explicit check on the extended CPUID level in cpu_has_svm(), the kernel's cached CPUID info will leave the entire SVM leaf unset if said leaf is not supported by hardware. Prior to using cached information, the check was needed to avoid false positives due to Intel's rather crazy CPUID behavior of returning the values of the maximum supported leaf if the specified leaf is unsupported. Fixes: 682a8108872f ("x86/kvm/svm: Simplify cpu_has_svm()") Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23parisc: led: Fix LAN receive and transmit LEDsHelge Deller
commit 4db89524b084f712a887256391fc19d9f66c8e55 upstream. Fix the LAN receive and LAN transmit LEDs, which where swapped up to now. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23parisc: Fix /proc/cpuinfo output for lscpuHelge Deller
commit 9f5ba4b3e1b3c123eeca5d2d09161e8720048b5c upstream. The lscpu command is broken since commit cab56b51ec0e ("parisc: Fix device names in /proc/iomem") added the PA pathname to all PA devices, includig the CPUs. lscpu parses /proc/cpuinfo and now believes it found different CPU types since every CPU is listed with an unique identifier (PA pathname). Fix this problem by simply dropping the PA pathname when listing the CPUs in /proc/cpuinfo. There is no need to show the pathname in this procfs file. Fixes: cab56b51ec0e ("parisc: Fix device names in /proc/iomem") Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23ARM: OMAP2+: Fix -Warray-bounds warning in _pwrdm_state_switch()Gustavo A. R. Silva
commit 847fb80cc01a54bc827b02547bb8743bdb59ddab upstream. If function pwrdm_read_prev_pwrst() returns -EINVAL, we will end up accessing array pwrdm->state_counter through negative index -22. This is wrong and the compiler is legitimately warning us about this potential problem. Fix this by sanity checking the value stored in variable _prev_ before accessing array pwrdm->state_counter. Address the following -Warray-bounds warning: arch/arm/mach-omap2/powerdomain.c:178:45: warning: array subscript -22 is below array bounds of 'unsigned int[4]' [-Warray-bounds] Link: https://github.com/KSPP/linux/issues/307 Fixes: ba20bb126940 ("OMAP: PM counter infrastructure.") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/20230607050639.LzbPn%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Message-ID: <ZIFVGwImU3kpaGeH@work> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23um: Fix hostaudio build errorsRandy Dunlap
[ Upstream commit db4bfcba7bb8d10f00bba2a3da6b9a9c2a1d7b71 ] Use "select" to ensure that the required kconfig symbols are set as expected. Drop HOSTAUDIO since it is now equivalent to UML_SOUND. Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the status quo of the default configs. Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a kconfig warning for unmet dependencies. (This was not an issue when SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig builds and didn't find any issues.) This fixes build errors when CONFIG_SOUND is not set: ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module': hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer' ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp' ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module': hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp' ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer' ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp' and this kconfig warning: WARNING: unmet direct dependencies detected for SOUND Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: d886e87cb82b ("sound: make OSS sound core optional") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-um@lists.infradead.org Cc: Tejun Heo <tj@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: linux-kbuild@vger.kernel.org Cc: alsa-devel@alsa-project.org Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23arch: um: drivers: Kconfig: pedantic formattingEnrico Weigelt, metux IT consult
[ Upstream commit 75f24f78721048a271e2e50a563f51bcfd6f5c1c ] Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Just indention changes. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Richard Weinberger <richard@nod.at> Stable-dep-of: db4bfcba7bb8 ("um: Fix hostaudio build errors") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23x86/APM: drop the duplicate APM_MINOR_DEV macroRandy Dunlap
[ Upstream commit 4ba2909638a29630a346d6c4907a3105409bee7d ] This source file already includes <linux/miscdevice.h>, which contains the same macro. It doesn't need to be defined here again. Fixes: 874bcd00f520 ("apm-emulation: move APM_MINOR_DEV to include/linux/miscdevice.h") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: x86@kernel.org Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20230728011120.759-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23powerpc/iommu: Fix notifiers being shared by PCI and VIO busesRussell Currey
[ Upstream commit c37b6908f7b2bd24dcaaf14a180e28c9132b9c58 ] fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both PCI and VIO buses. struct notifier_block is a linked list node, so this causes any notifiers later registered to either bus type to also be registered to the other since they share the same node. This causes issues in (at least) the vgaarb code, which registers a notifier for PCI buses. pci_notify() ends up being called on a vio device, converted with to_pci_dev() even though it's not a PCI device, and finally makes a bad access in vga_arbiter_add_pci_device() as discovered with KASAN: BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00 Read of size 4 at addr c000000264c26fdc by task swapper/0/1 Call Trace: dump_stack_lvl+0x1bc/0x2b8 (unreliable) print_report+0x3f4/0xc60 kasan_report+0x244/0x698 __asan_load4+0xe8/0x250 vga_arbiter_add_pci_device+0x60/0xe00 pci_notify+0x88/0x444 notifier_call_chain+0x104/0x320 blocking_notifier_call_chain+0xa0/0x140 device_add+0xac8/0x1d30 device_register+0x58/0x80 vio_register_device_node+0x9ac/0xce0 vio_bus_scan_register_devices+0xc4/0x13c __machine_initcall_pseries_vio_device_init+0x94/0xf0 do_one_initcall+0x12c/0xaa8 kernel_init_freeable+0xa48/0xba8 kernel_init+0x64/0x400 ret_from_kernel_thread+0x5c/0x64 Fix this by creating separate notifier_block structs for each bus type. Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection") Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by: Russell Currey <ruscur@russell.cc> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> [mpe: Add #ifdef to fix CONFIG_IBMVIO=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230322035322.328709-1-ruscur@russell.cc Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: BCM53573: Fix Ethernet info for Luxul devicesRafał Miłecki
[ Upstream commit 44ad8207806973f4e4f7d870fff36cc01f494250 ] Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that use a non-default design. They don't include switch but have a single Ethernet port and BCM54210E PHY connected to the Ethernet controller's MDIO bus. Support for those devices regressed due to two changes: 1. Describing MDIO bus with switch After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Linux stopped probing for MDIO devices. 2. Dropping hardcoded BCM54210E delays In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays configuration for BCM54210E") support for other PHY modes was added but that requires a proper "phy-mode" value in DT. Both above changes are correct (they don't need to be reverted or anything) but they need this fix for DT data to be correct and for Linux to work properly. Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)Krzysztof Kozlowski
[ Upstream commit 982655cb0e7f18934d7532c32366e574ad61dbd7 ] The davicom,dm9000 Ethernet Controller accepts two reg addresses. Fixes: b672b27d232e ("ARM: dts: Add Device tree for s5pc110/s5pv210 boards") Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20230713152926.82884-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: s5pv210: add dummy 5V regulator for backlight on SMDKv210Krzysztof Kozlowski
[ Upstream commit b77904ba177a9c67b6dbc3637fdf1faa22df6e5c ] Backlight is supplied by DC5V regulator. The DTS has no PMIC node, so just add a regulator-fixed to solve it and fix dtbs_check warning: s5pv210-smdkv210.dtb: backlight: 'power-supply' is a required property Link: https://lore.kernel.org/r/20230421095721.31857-4-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Stable-dep-of: 982655cb0e7f ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: s5pv210: correct ethernet unit address in SMDKV210Krzysztof Kozlowski
[ Upstream commit 28ab4caccd17d7b84fd8aa36b13af5e735870bad ] The SROM bank 5 is at address 0xa8000000, just like the one put in "reg" property of ethernet node. Fix the unit address of ethernet node. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-2-krzk@kernel.org Stable-dep-of: 982655cb0e7f ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: s5pv210: use defines for IRQ flags in SMDKV210Krzysztof Kozlowski
[ Upstream commit c272f1cc9492d61dac362d2064ec41ca97fcb1e2 ] Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-19-krzk@kernel.org Stable-dep-of: 982655cb0e7f ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: s5pv210: add RTC 32 KHz clock in SMDKV210Krzysztof Kozlowski
[ Upstream commit 7260b363457a22b8723d5cbc43fee67397896d07 ] The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-15-krzk@kernel.org Stable-dep-of: 982655cb0e7f ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)Krzysztof Kozlowski
[ Upstream commit cf0cb2af6a18f28b84f9f1416bff50ca60d6e98a ] The davicom,dm9000 Ethernet Controller accepts two reg addresses. Fixes: a43736deb47d ("ARM: dts: Add dts file for S3C6410-based Mini6410 board") Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20230713152926.82884-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: s3c64xx: align pinctrl with dtschemaKrzysztof Kozlowski
[ Upstream commit 9e47ccc01284aba7fe5fbf6ee2a7abc29bf2a740 ] Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111201722.327219-16-krzysztof.kozlowski@canonical.com Stable-dep-of: cf0cb2af6a18 ("ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410Krzysztof Kozlowski
[ Upstream commit 5911622eff5134c4bf1e16e4e1e2fd18c4f24889 ] The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-5-krzk@kernel.org Stable-dep-of: cf0cb2af6a18 ("ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: s3c6410: move fixed clocks under root node in Mini6410Krzysztof Kozlowski
[ Upstream commit 8b81a8decea77bf2ca3c718732184d4aaf949096 ] The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-3-krzk@kernel.org Stable-dep-of: cf0cb2af6a18 ("ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ARM: dts: BCM53573: Use updated "spi-gpio" binding propertiesRafał Miłecki
[ Upstream commit 2c0fd6b3d0778ceab40205315ccef74568490f17 ] Switch away from deprecated properties. This fixes: arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected) From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230707114004.2740-4-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 09:27:21 +0000