| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 7d0cce6cbe71af6e9c1831bff101a2b9c249c4a2 ]
Introduce vmx_guest_debugctl_{read,write}() to handle all accesses to
vmcs.GUEST_IA32_DEBUGCTL. This will allow stuffing FREEZE_IN_SMM into
GUEST_IA32_DEBUGCTL based on the host setting without bleeding the state
into the guest, and without needing to copy+paste the FREEZE_IN_SMM
logic into every patch that accesses GUEST_IA32_DEBUGCTL.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: massage changelog, make inline, use in all prepare_vmcs02() cases]
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250610232010.162191-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 6b1dd26544d0 ("KVM: VMX: Preserve host's DEBUGCTLMSR_FREEZE_IN_SMM while running the guest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 095686e6fcb4150f0a55b1a25987fad3d8af58d6 ]
Add a consistency check for L2's guest_ia32_debugctl, as KVM only supports
a subset of hardware functionality, i.e. KVM can't rely on hardware to
detect illegal/unsupported values. Failure to check the vmcs12 value
would allow the guest to load any harware-supported value while running L2.
Take care to exempt BTF and LBR from the validity check in order to match
KVM's behavior for writes via WRMSR, but without clobbering vmcs12. Even
if VM_EXIT_SAVE_DEBUG_CONTROLS is set in vmcs12, L1 can reasonably expect
that vmcs12->guest_ia32_debugctl will not be modified if writes to the MSR
are being intercepted.
Arguably, KVM _should_ update vmcs12 if VM_EXIT_SAVE_DEBUG_CONTROLS is set
*and* writes to MSR_IA32_DEBUGCTLMSR are not being intercepted by L1, but
that would incur non-trivial complexity and wouldn't change the fact that
KVM's handling of DEBUGCTL is blatantly broken. I.e. the extra complexity
is not worth carrying.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250610232010.162191-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 6b1dd26544d0 ("KVM: VMX: Preserve host's DEBUGCTLMSR_FREEZE_IN_SMM while running the guest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8a4351ac302cd8c19729ba2636acfd0467c22ae8 ]
Move VMX's logic to check DEBUGCTL values into a standalone helper so that
the code can be used by nested VM-Enter to apply the same logic to the
value being loaded from vmcs12.
KVM needs to explicitly check vmcs12->guest_ia32_debugctl on nested
VM-Enter, as hardware may support features that KVM does not, i.e. relying
on hardware to detect invalid guest state will result in false negatives.
Unfortunately, that means applying KVM's funky suppression of BTF and LBR
to vmcs12 so as not to break existing guests.
No functional change intended.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250610232010.162191-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 6b1dd26544d0 ("KVM: VMX: Preserve host's DEBUGCTLMSR_FREEZE_IN_SMM while running the guest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59305202c67fea50378dcad0cc199dbc13a0e99a upstream.
Memory hot remove unmaps and tears down various kernel page table regions
as required. The ptdump code can race with concurrent modifications of
the kernel page tables. When leaf entries are modified concurrently, the
dump code may log stale or inconsistent information for a VA range, but
this is otherwise not harmful.
But when intermediate levels of kernel page table are freed, the dump code
will continue to use memory that has been freed and potentially
reallocated for another purpose. In such cases, the ptdump code may
dereference bogus addresses, leading to a number of potential problems.
To avoid the above mentioned race condition, platforms such as arm64,
riscv and s390 take memory hotplug lock, while dumping kernel page table
via the sysfs interface /sys/kernel/debug/kernel_page_tables.
Similar race condition exists while checking for pages that might have
been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages
which in turn calls ptdump_check_wx(). Instead of solving this race
condition again, let's just move the memory hotplug lock inside generic
ptdump_check_wx() which will benefit both the scenarios.
Drop get_online_mems() and put_online_mems() combination from all existing
platform ptdump code paths.
Link: https://lkml.kernel.org/r/20250620052427.2092093-1-anshuman.khandual@arm.com
Fixes: bbd6ec605c0f ("arm64/mm: Enable memory hot remove")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 963f1b20a8d2a098954606b9725cd54336a2a86c upstream.
Correct "objree" to "objtree". "objree" is not defined.
Fixes: 75dd47472b92 ("kbuild: remove src and obj from the top Makefile")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
initialized to zero
commit 3ee9cebd0a5e7ea47eb35cec95eaa1a866af982d upstream.
In order to support future versions of the SVSM_CORE_PVALIDATE call, all
reserved fields within a PVALIDATE entry must be set to zero as an SVSM should
be ensuring all reserved fields are zero in order to support future usage of
reserved areas based on the protocol version.
Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/7cde412f8b057ea13a646fb166b1ca023f6a5031.1755098819.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31cd31c9e17ece125aad27259501a2af69ccb020 upstream.
Problem
-------
With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status
causes a warning and a NULL pointer dereference.
This is because the AVX-512 timestamp code uses x86_task_fpu() but
doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function
for kernel threads (PF_KTHREAD specifically), making it return NULL.
The point of the warning was to ensure that kernel threads only access
task->fpu after going through kernel_fpu_begin()/_end(). Note: all
kernel tasks exposed in /proc have a valid task->fpu.
Solution
--------
One option is to silence the warning and check for NULL from
x86_task_fpu(). However, that warning is fairly fresh and seems like a
defense against misuse of the FPU state in kernel threads.
Instead, stop outputting AVX-512_elapsed_ms for kernel threads
altogether. The data was garbage anyway because avx512_timestamp is
only updated for user threads, not kernel threads.
If anyone ever wants to track kernel thread AVX-512 use, they can come
back later and do it properly, separate from this bug fix.
[ dhansen: mostly rewrite changelog ]
Fixes: 22aafe3bcb67 ("x86/fpu: Remove init_task FPU state dependencies, add debugging warning for PF_KTHREAD tasks")
Co-developed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250811185044.2227268-1-sohil.mehta%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5eb1bcdb6a8c088514019c3a9bda5d565beed1af ]
Currently, when a Secure TSC enabled SNP guest attempts to write to the
intercepted GUEST_TSC_FREQ MSR (a read-only MSR), the guest kernel response
incorrectly implies a VMM configuration error, when in fact it is the usual
VMM configuration to intercept writes to read-only MSRs, unless explicitly
documented.
Modify the intercepted TSC MSR #VC handling:
* Write to GUEST_TSC_FREQ will generate a #GP instead of terminating the
guest
* Write to MSR_IA32_TSC will generate a #GP instead of silently ignoring it
However, continue to terminate the guest when reading from intercepted
GUEST_TSC_FREQ MSR with Secure TSC enabled, as intercepted reads indicate an
improper VMM configuration for Secure TSC enabled SNP guests.
[ bp: simplify comment. ]
Fixes: 38cc6495cdec ("x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250722074853.22253-1-nikunj@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c9a7ff9882fc6ba7d2f4050697e8bb80383e8dc ]
request_mem_region() will return NULL instead of error code
when the memory request fails. Therefore, we should check if
the return value is non-zero instead of less than zero. In
this way, this patch also fixes the build warnings:
arch/mips/lantiq/falcon/sysctrl.c:214:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
214 | res_status.name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:216:47: error: ordered comparison of pointer with integer zero [-Werror=extra]
216 | res_ebu.name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:219:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
219 | res_sys[0].name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:222:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
222 | res_sys[1].name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:225:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
225 | res_sys[2].name) < 0))
|
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9f4a6b3421e936c3ee9d74710243897d74dbaa2 ]
Not all tasks have an ABI associated or vDSO mapped,
for example kthreads never do.
If such a task ever ends up calling stack_top(), it will derefence the
NULL ABI pointer and crash.
This can for example happen when using kunit:
mips_stack_top+0x28/0xc0
arch_pick_mmap_layout+0x190/0x220
kunit_vm_mmap_init+0xf8/0x138
__kunit_add_resource+0x40/0xa8
kunit_vm_mmap+0x88/0xd8
usercopy_test_init+0xb8/0x240
kunit_try_run_case+0x5c/0x1a8
kunit_generic_run_threadfn_adapter+0x28/0x50
kthread+0x118/0x240
ret_from_kernel_thread+0x14/0x1c
Only dereference the ABI point if it is set.
The GIC page is also included as it is specific to the vDSO.
Also move the randomization adjustment into the same conditional.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 844615dd0f2d95c018ec66b943e08af22b62aff3 ]
These functions are exported but their prototypes are not defined.
This patch adds the missing function prototypes to fix the following
compilation warnings:
arch/mips/kernel/vpe-mt.c:180:7: error: no previous prototype for 'vpe_alloc' [-Werror=missing-prototypes]
180 | void *vpe_alloc(void)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:198:5: error: no previous prototype for 'vpe_start' [-Werror=missing-prototypes]
198 | int vpe_start(void *vpe, unsigned long start)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:208:5: error: no previous prototype for 'vpe_stop' [-Werror=missing-prototypes]
208 | int vpe_stop(void *vpe)
| ^~~~~~~~
arch/mips/kernel/vpe-mt.c:229:5: error: no previous prototype for 'vpe_free' [-Werror=missing-prototypes]
229 | int vpe_free(void *vpe)
| ^~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit beecfd6a88a675e20987e70ec532ba734b230fa4 ]
If kretprobe_find_ret_addr() fails to find the original return address,
it returns 0. Check for this case so that a reliable stacktrace won't
silently ignore it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf183c1730f2634245da35e9b5d53381b787d112 ]
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250620075602.12575-1-fourier.thomas@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bad3fa2fb9206f4dcec6ddef094ec2fbf6e8dcb2 ]
The kernel currently alway prints:
"Use ACPI SPCR as default console: No/Yes "
even on systems that lack an SPCR table. This can
mislead users into thinking the SPCR table exists
on the machines without SPCR.
With this change, the "Yes" is only printed if
the SPCR table is present, parsed and !param_acpi_nospcr.
This avoids user confusion on SPCR-less systems.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20250620131309.126555-3-me@linux.beauty
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 760b9b4f6de9a33ca56a05f950cabe82138d25bd ]
If the device configuration fails (if `dma_dev->device_config()`),
`sg_dma_address(&sg)` is not initialized and the jump to `err_dma_prep`
leads to calling `dma_unmap_single()` on `sg_dma_address(&sg)`.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610142918.169540-2-fourier.thomas@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cf636c99b257c1b4b12066ab34fd5f06e8d892f ]
In case of an early crash the early program check handler also prints the
last breaking event address which is contained within the pt_regs
structure. However it is not initialized, and therefore a more or less
random value is printed in case of a crash.
Copy the last breaking event address from lowcore to pt_regs in case of an
early program check to address this. This also makes it easier to analyze
early crashes.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b367017cdac21781a74eff4e208d3d38e1f38d3f ]
When an stp sync check is handled on a system with multiple
cpus each cpu gets a machine check but only the first one
actually handles the sync operation. All other CPUs spin
waiting for the first one to finish with a short udelay().
But udelay can't be used here as the first CPU modifies tod_clock_base
before performing the sync op. During this timeframe
get_tod_clock_monotonic() might return a non-monotonic time.
The time spent waiting should be very short and udelay is a busy loop
anyways, therefore simply remove the udelay.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b9e2f2246eb2b5617d53af7b5e4e1b8c916f26a8 ]
The thread flags may change during their processing.
For example a task_work can queue a new signal to be sent.
This signal should be delivered before returning to usespace again.
Evaluate the flags repeatedly similar to other architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20250704-uml-thread_flags-v1-1-0e293fd8d627@linutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7ce7e3a84642aadf7c4787f7ec4f58eb163d129 ]
Set TAINT_MACHINE_CHECK when SError or Synchronous External Abort (SEA)
interrupts trigger a panic to flag potential hardware faults. This
tainting mechanism aids in debugging and enables correlation of
hardware-related crashes in large-scale deployments.
This change aligns with similar patches[1] that mark machine check
events when the system crashes due to hardware errors.
Link: https://lore.kernel.org/all/20250702-add_tain-v1-1-9187b10914b9@debian.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250716-vmcore_hw_error-v2-1-f187f7d62aba@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09e7e29d2b49ba84bcefb3dc1657726d2de5bb24 ]
Otherwise the code might not work correctly when the clock
is changed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f85fdb9fc5a1bd308a10a0a7d7e34f2712ba58b ]
The purpose of the warning is to prevent an unexpected change to the return
thunk mitigation. However, there are legitimate cases where the return
thunk is intentionally set more than once. For example, ITS and SRSO both
can set the return thunk after retbleed has set it. In both the cases
retbleed is still mitigated.
Replace the warning with an info about the active return thunk.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250611-eibrs-fix-v4-3-5ff86cac6c61@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b22e0432981c2fa230f1b493082b7e67112c4aa ]
In case efi_mm is active go use the userspace instruction decoder which
supports fetching instructions from active_mm. This is needed to make
instruction emulation work for EFI runtime code, so it can use CPUID and
RDMSR.
EFI runtime code uses the CPUID instruction to gather information about
the environment it is running in, such as SEV being enabled or not, and
choose (if needed) the SEV code path for ioport access.
EFI runtime code uses the RDMSR instruction to get the location of the
CAA page (see SVSM spec, section 4.2 - "Post Boot").
The big picture behind this is that the kernel needs to be able to
properly handle #VC exceptions that come from EFI runtime services.
Since EFI runtime services have a special page table mapping for the EFI
virtual address space, the efi_mm context must be used when decoding
instructions during #VC handling.
[ bp: Massage. ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/20250626114014.373748-2-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 398e67e0f5ae04b29bcc9cbf342e339fe9d3f6f1 ]
Kasan crashes the kernel trying to check boundaries when using the
normal memcpy.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250522-mach-tegra-kasan-v1-1-419041b8addb@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cdb433bb44cdc87dc5260cdf15bf03cc1cd1814 ]
In order to bring up secondary CPUs main CPU write trampoline
code to SRAM. The trampoline code is written while secondary
CPUs are powered on (at least that true for RK3188 CPU).
Sometimes that leads to kernel hang. Probably because secondary
CPU execute trampoline code while kernel doesn't expect.
The patch moves SRAM initialization step to the point where all
secondary CPUs are powered down.
That fixes rarely hangs on RK3188:
[ 0.091568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091996] rockchip_smp_prepare_cpus: ncores 4
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Link: https://lore.kernel.org/r/20250703140453.1273027-1-al.kochet@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65c430906efffee9bd7551d474f01a6b1197df90 ]
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
WARNING: modpost: vmlinux: section mismatch in reference: acpi_get_enable_method+0x1c (section: .text.unlikely) -> acpi_psci_present (section: .init.text)
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For arm64 this requires forcing one ACPI function to be inlined with
__always_inline.
Link: https://lore.kernel.org/r/20250724055029.3623499-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7f75e2883c4bd57b12c3be61bb926929adad9c0 ]
Describe perisys-apb4-hclk as the APB clock for TH1520 SoC, which is
essential for accessing GMAC glue registers.
Fixes: 7e756671a664 ("riscv: dts: thead: Add TH1520 ethernet nodes")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-5-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9f65592b7e1f24569bb6ced064df5b4319f725ce upstream.
Restore the len >= 288 condition on using the AVX implementation, which
was incidentally removed by commit 318c53ae02f2 ("crypto: x86/poly1305 -
Add block-only interface"). This check took into account the overhead
in key power computation, kernel-mode "FPU", and tail handling
associated with the AVX code. Indeed, restoring this check slightly
improves performance for len < 256 as measured using poly1305_kunit on
an "AMD Ryzen AI 9 365" (Zen 5) CPU:
Length Before After
====== ========== ==========
1 30 MB/s 36 MB/s
16 516 MB/s 598 MB/s
64 1700 MB/s 1882 MB/s
127 2265 MB/s 2651 MB/s
128 2457 MB/s 2827 MB/s
200 2702 MB/s 3238 MB/s
256 3841 MB/s 3768 MB/s
511 4580 MB/s 4585 MB/s
512 5430 MB/s 5398 MB/s
1024 7268 MB/s 7305 MB/s
3173 8999 MB/s 8948 MB/s
4096 9942 MB/s 9921 MB/s
16384 10557 MB/s 10545 MB/s
While the optimal threshold for this CPU might be slightly lower than
288 (see the len == 256 case), other CPUs would need to be tested too,
and these sorts of benchmarks can underestimate the true cost of
kernel-mode "FPU". Therefore, for now just restore the 288 threshold.
Fixes: 318c53ae02f2 ("crypto: x86/poly1305 - Add block-only interface")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250706231100.176113-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 16f2c30e290e04135b70ad374fb7e1d1ed9ff5e7 upstream.
Restore the SIMD usability check and base conversion that were removed
by commit 318c53ae02f2 ("crypto: x86/poly1305 - Add block-only
interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use irq_fpu_usable() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test.
Fixes: 318c53ae02f2 ("crypto: x86/poly1305 - Add block-only interface")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250706231100.176113-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d35ec48fa6c8fe0cfa4a03155109fec7677911d4 upstream.
Since $(LD) is directly used, hence -nostdlib is unneeded, MIPS has
removed this, we should remove it too.
bdbf2038fbf4 ("MIPS: VDSO: remove -nostdlib compiler flag").
In fact, other architectures also use $(LD) now.
fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO")
691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
2ff906994b6c ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO")
2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Cc: stable@vger.kernel.org
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 70a2365e18affc5ebdaab1ca6a0b3c4f3aac2ee8 upstream.
In init_cpu_fullname(), a constant pointer to "model" property is
retrieved. It's later modified by the strsep() function, which is
illegal and corrupts kernel's FDT copy. This is shown by dmesg,
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
Create a mutable copy of the model property and do in-place operations
on the mutable copy instead. loongson_sysconf.cpuname lives across the
kernel lifetime, thus manually releasing isn't necessary.
Also move the of_node_put() call for the root node after the usage of
its property, since of_node_put() decreases the reference counter thus
usage after the call is unsafe.
Cc: stable@vger.kernel.org
Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS")
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1a81b5477196ca1290b367404a461e046e647d5 upstream.
Now relocate_new_kernel_size is a .long value, which means 32bit, so its
high 32bit is undefined. This causes memcpy((void *)reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size) in machine_kexec_prepare()
access out of range memories in some cases, and then end up with an ADE
exception.
So make relocate_new_kernel_size be a .quad value, which means 64bit, to
avoid such errors.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2362e8124ed21445c6886806e5deaee717629ddd upstream.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd39d9e6b7e4c58fa77783e7aedf7ada51d02ea3 upstream.
The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by
"#define jmp_offset (out_offset - (cur_offset))"
is a negative number, which is wrong. The final generated assembly are
as follow.
54: bgeu $a2, $t1, -8 # 0x0000004c
58: addi.d $a6, $s5, -1
5c: bltz $a6, -16 # 0x0000004c
60: alsl.d $t2, $a2, $a1, 0x3
64: ld.d $t2, $t2, 264
68: beq $t2, $zero, -28 # 0x0000004c
Before apply this patch, the follow test case will reveal soft lock issues.
cd tools/testing/selftests/bpf/
./test_progs --allow=tailcalls/tailcall_bpf2bpf_1
dmesg:
watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056]
Cc: stable@vger.kernel.org
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65ba2a6e77e9e5c843a591055789050e77b5c65e upstream.
According to the "GPIO Expander Map / Table" section of the J722S EVM
Schematic within the Evaluation Module Design Files package [0], the
GPIO Pin P05 located on the GPIO Expander 1 (I2C0/0x23) has to be pulled
down to select the Type-C interface. Since commit under Fixes claims to
enable the Type-C interface, update the property within "p05-hog" from
"output-high" to "output-low", thereby switching from the Type-A
interface to the Type-C interface.
[0]: https://www.ti.com/lit/zip/sprr495
Cc: stable@vger.kernel.org
Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250623100657.4082031-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 35ad7e181541aa5757f9f316768d3e64403ec843 upstream.
Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.
Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.
Cc: stable@kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5647f61ad9171e8f025558ed6dc5702c56a33ba3 upstream.
Commit 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing
page") added a warning to pte_free_defer(), on our request. It was meant
to warn if this would ever be reached for KVM guest mappings, because
the page table would be freed w/o a gmap_unlink(). THP mappings are not
allowed for KVM guests on s390, so this should never happen.
However, it is possible that the warning is triggered in a valid case as
false-positive.
s390_enable_sie() takes the mmap_lock, marks all VMAs as VM_NOHUGEPAGE and
splits possibly existing THP guest mappings. mm->context.has_pgste is set
to 1 before that, to prevent races with the mm_has_pgste() check in
MADV_HUGEPAGE.
khugepaged drops the mmap_lock for file mappings and might run in parallel,
before a vma is marked VM_NOHUGEPAGE, but after mm->context.has_pgste was
set to 1. If it finds file mappings to collapse, it will eventually call
pte_free_defer(). This will trigger the warning, but it is a valid case
because gmap is not yet set up, and the THP mappings will be split again.
Therefore, remove the warning and the comment.
Fixes: 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing page")
Cc: <stable@vger.kernel.org> # 6.6+
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 303084ad12767db64c84ba8fcd0450aec38c8534 upstream.
Most HCR_EL2 bits are not supposed to affect EL2 at all, but only
the guest. However, we gladly merge these bits with the host's
HCR_EL2 configuration, irrespective of entering L1 or L2.
This leads to some funky behaviour, such as L1 trying to inject
a virtual SError for L2, and getting a taste of its own medecine.
Not quite what the architecture anticipated.
In the end, the only bits that matter are those we have defined as
invariants, either because we've made them RESx (E2H, HCD...), or
that we actively refuse to merge because the mess with KVM's own
logic.
Use the sanitisation infrastructure to get the RES1 bits, and let
things rip in a safer way.
Fixes: 04ab519bb86df ("KVM: arm64: nv: Configure HCR_EL2 for FEAT_NV2")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250721101955.535159-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c6e35dff58d348c1a9489e9b3b62b3721e62631d upstream.
Mark Brown reports that since we commit to making exceptions
visible without the vcpu being loaded, the external abort selftest
fails.
Upon investigation, it turns out that the code that makes registers
affected by an exception visible to the guest is completely broken
on VHE, as we don't check whether the system registers are loaded
on the CPU at this point. We managed to get away with this so far,
but that's obviously as bad as it gets,
Add the required checksm and document the absolute need to check
for the SYSREGS_ON_CPU flag before calling into any of the
__vcpu_write_sys_reg_to_cpu()__vcpu_read_sys_reg_from_cpu() helpers.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/18535df8-e647-4643-af9a-bb780af03a70@sirena.org.uk
Link: https://lore.kernel.org/r/20250720102229.179114-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17ec2f965344ee3fd6620bef7ef68792f4ac3af0 upstream.
Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the
guest CPUID model, as debug support is supposed to be available if RTM is
supported, and there are no known downsides to letting the guest debug RTM
aborts.
Note, there are no known bug reports related to RTM_DEBUG, the primary
motivation is to reduce the probability of breaking existing guests when a
future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL
(KVM currently lets L2 run with whatever hardware supports; whoops).
Note #2, KVM already emulates DR6.RTM, and doesn't restrict access to
DR7.RTM.
Fixes: 83c529151ab0 ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610232010.162191-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80c64c7afea1da6a93ebe88d3d29d8a60377ef80 upstream.
Instruct vendor code to load the guest's DR6 into hardware via a new
KVM_RUN flag, and remove kvm_x86_ops.set_dr6(), whose sole purpose was to
load vcpu->arch.dr6 into hardware when DR6 can be read/written directly
by the guest.
Note, TDX already WARNs on any run_flag being set, i.e. will yell if KVM
thinks DR6 needs to be reloaded. TDX vCPUs force KVM_DEBUGREG_AUTO_SWITCH
and never clear the flag, i.e. should never observe KVM_RUN_LOAD_GUEST_DR6.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610232010.162191-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2478b1b220c49d25cb1c3f061ec4f9b351d9a131 upstream.
Convert kvm_x86_ops.vcpu_run()'s "force_immediate_exit" boolean parameter
into an a generic bitmap so that similar "take action" information can be
passed to vendor code without creating a pile of boolean parameters.
This will allow dropping kvm_x86_ops.set_dr6() in favor of a new flag, and
will also allow for adding similar functionality for re-loading debugctl
in the active VMCS.
Opportunistically massage the TDX WARN and comment to prepare for adding
more run_flags, all of which are expected to be mutually exclusive with
TDX, i.e. should be WARNed on.
No functional change intended.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610232010.162191-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1cec9ac2d071cfd2da562241aab0ef701355762a upstream.
Right now, if XRSTOR fails a console message like this is be printed:
Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers.
However, the text location (...+0x9a in this case) is the instruction
*AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump
also points one instruction late.
The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and
keep on running after returning from the #GP handler. But it does this
fixup before warning.
The resulting warning output is nonsensical because it looks like the
non-FPU-related instruction is #GP'ing.
Do not fix up RIP until after printing the warning. Do this by using
the more generic and standard ex_handler_default().
Fixes: d5c8028b4788 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Acked-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 7b306dfa326f70114312b320d083b21fa9481e1e upstream.
An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.
CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that,
when set, indicates that the software mitigation for this vulnerability is
not needed.
Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest
is vulnerable.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e29409faec87ffd2de2ed20b6109f303f129281b ]
Fix 'kernel image' end address for kaslr case.
Fixes: ec6f9f7e5bbf ("s390/boot: Add startup debugging support")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit daa8af80d283ee9a7d42dd6f164a65036665b9d4 ]
Make vmem_pte_alloc() consistent by always allocating page table of
PAGE_SIZE granularity, regardless of whether page_table_alloc() (with
slab) or memblock_alloc() is used. This ensures page table can be fully
freed when the corresponding page table entries are removed.
Fixes: d08d4e7cd6bf ("s390/mm: use full 4KB page for 2KB PTE")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce0b5eedcb753697d43f61dd2e27d68eb5d3150f ]
Hogan reported a vector setup race, which overwrites the interrupt
descriptor in the per CPU vector array resulting in a disfunctional device.
CPU0 CPU1
interrupt is raised in APIC IRR
but not handled
free_irq()
per_cpu(vector_irq, CPU1)[vector] = VECTOR_SHUTDOWN;
request_irq() common_interrupt()
d = this_cpu_read(vector_irq[vector]);
per_cpu(vector_irq, CPU1)[vector] = desc;
if (d == VECTOR_SHUTDOWN)
this_cpu_write(vector_irq[vector], VECTOR_UNUSED);
free_irq() cannot observe the pending vector in the CPU1 APIC as there is
no way to query the remote CPUs APIC IRR.
This requires that request_irq() uses the same vector/CPU as the one which
was freed, but this also can be triggered by a spurious interrupt.
Interestingly enough this problem managed to be hidden for more than a
decade.
Prevent this by reevaluating vector_irq under the vector lock, which is
held by the interrupt activation code when vector_irq is updated.
To avoid ifdeffery or IS_ENABLED() nonsense, move the
[un]lock_vector_lock() declarations out under the
CONFIG_IRQ_DOMAIN_HIERARCHY guard as it's only provided when
CONFIG_X86_LOCAL_APIC=y.
The current CONFIG_IRQ_DOMAIN_HIERARCHY guard is selected by
CONFIG_X86_LOCAL_APIC, but can also be selected by other parts of the
Kconfig system, which makes 32-bit UP builds with CONFIG_X86_LOCAL_APIC=n
fail.
Can we just get rid of this !APIC nonsense once and forever?
Fixes: 9345005f4eed ("x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs")
Reported-by: Hogan Wang <hogan.wang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Hogan Wang <hogan.wang@huawei.com>
Link: https://lore.kernel.org/all/draft-87ikjhrhhh.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56f4cfab1c93b14da422cdcd23898eb008033696 ]
The value of high_memory variable is set by set_high_memory() function
to a value returned by memblock_end_of_DRAM(). The latter function
returns by default the upper bound of the last online memory block,
not the upper bound of the directly mapped memory region. As result,
in case the end of memory happens to be offline, high_memory variable
is set to a value that is short on the last offline memory blocks size:
RANGE SIZE STATE REMOVABLE BLOCK
0x0000000000000000-0x000000ffffffffff 1T online yes 0-511
0x0000010000000000-0x0000011fffffffff 128G offline 512-575
Memory block size: 2G
Total online memory: 1T
Total offline memory: 128G
crash> p/x vm_layout
$1 = {
kaslr_offset = 0x3453e918000,
kaslr_offset_phys = 0xa534218000,
identity_base = 0x0,
identity_size = 0x12000000000
}
crash> p/x high_memory
$2 = 0x10000000000
In the past the value of high_memory was derived from max_low_pfn,
which in turn was derived from the identity_size. Since identity_size
accommodates the whole memory size - including tailing offline blocks,
the offlined blocks did not impose any problem. But since commit
e120d1bc12da ("arch, mm: set high_memory in free_area_init()") the
value of high_memory is derived from the last memblock online region,
and that is where the problem comes from.
The value of high_memory is used by several drivers and by external
tools (e.g. crash tool aborts while loading a dump).
Similarily to ARM, use the override path provided by set_high_memory()
function and set the value of high_memory at the end of the identity
mapping early. That forces set_high_memory() to leave in high_memory
the correct value, even when the end of available memory is offline.
Fixes: e120d1bc12da ("arch, mm: set high_memory in free_area_init()")
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 123b7c7c2ba725daf3bfa5ce421d65b92cb5c075 ]
The SLCF bit ("stateless command filtering") introduced with
CEX8 cards was because of the function mask's default value
suppressed when user space read the ap function for an AP
card or queue. Unmask this bit so that user space applications
like lszcrypt can evaluate and list this feature.
Fixes: d4c53ae8e494 ("s390/ap: store TAPQ hwinfo in struct ap_card")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3dca3d51b933beb3f35a60472ed2110d1bd7046a ]
Commit fb52f3226cab ("ARM: s3c/gpio: use new line value setter
callbacks") correctly changed the assignment of the callback but missed
the check one liner higher. Change it now too to using the recommended
callback as the legacy one is going away soon.
Fixes: fb52f3226cab ("ARM: s3c/gpio: use new line value setter callbacks")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2a2a6fc2469524caa713036297c542746d148dc ]
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
