| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 10e4b5166df9ff7a2d5316138ca668b42d004422 ]
Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and
commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a
per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in
order to avoid unnecessary writes to the MSR.
On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which
wipes out any stale state. But the per CPU cached xfd value is not
reset, which brings them out of sync.
As a consequence a subsequent xfd_update_state() might fail to update
the MSR which in turn can result in XRSTOR raising a #NM in kernel
space, which crashes the kernel.
To fix this, introduce xfd_set_state() to write xfd_state together
with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.
Fixes: 672365477ae8 ("x86/fpu: Update XFD state where required")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com
Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2208aa12c27bfada3c15c550c03ca81d42dcac2 ]
The APIC address is registered twice. First during the early detection and
afterwards when actually scanning the table for APIC IDs. The APIC and
topology core warn about the second attempt.
Restrict it to the early detection call.
Fixes: 81287ad65da5 ("x86/apic: Sanitize APIC address setup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.297774848@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e51653d5d871f40f1bd5cf95cc7f2d8b33d063b ]
Read from an unsafe address with copy_from_kernel_nofault() in
arch_adjust_kprobe_addr() because this function is used before checking
the address is in text or not. Syzcaller bot found a bug and reported
the case if user specifies inaccessible data area,
arch_adjust_kprobe_addr() will cause a kernel panic.
[ mingo: Clarified the comment. ]
Fixes: cc66bb914578 ("x86/ibt,kprobes: Cure sym+0 equals fentry woes")
Reported-by: Qiang Zhang <zzqq0103.hey@gmail.com>
Tested-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/171042945004.154897.2221804961882915806.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1c811d403afd73f04bde82b83b24c754011bd0e8 upstream.
The early startup code executes from a 1:1 mapping of memory, which
differs from the mapping that the code was linked and/or relocated to
run at. The latter mapping is not active yet at this point, and so
symbol references that rely on it will fault.
Given that the core kernel is built without -fPIC, symbol references are
typically emitted as absolute, and so any such references occuring in
the early startup code will therefore crash the kernel.
While an attempt was made to work around this for the early SEV/SME
startup code, by forcing RIP-relative addressing for certain global
SEV/SME variables via inline assembly (see snp_cpuid_get_table() for
example), RIP-relative addressing must be pervasively enforced for
SEV/SME global variables when accessed prior to page table fixups.
__startup_64() already handles this issue for select non-SEV/SME global
variables using fixup_pointer(), which adjusts the pointer relative to a
`physaddr` argument. To avoid having to pass around this `physaddr`
argument across all functions needing to apply pointer fixups, introduce
a macro RIP_RELATIVE_REF() which generates a RIP-relative reference to
a given global variable. It is used where necessary to force
RIP-relative accesses to global variables.
For backporting purposes, this patch makes no attempt at cleaning up
other occurrences of this pattern, involving either inline asm or
fixup_pointer(). Those will be addressed later.
[ bp: Call it "rip_rel_ref" everywhere like other code shortens
"rIP-relative reference" and make the asm wrapper __always_inline. ]
Co-developed-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/all/20240130220845.1978329-1-kevinloughlin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5c84b051bd4e777cf37aaff983277e58c99618d5 ]
Update them to the correct revision numbers.
Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d54e56f31a34fa38fcb5e91df609f9633419a79a ]
Commit 344da544f177 ("x86/nmi: Print reasons why backtrace NMIs are
ignored") creates a super nice framework to diagnose NMIs.
Every time nmi_exc() is called, it increments a per_cpu counter
(nsp->idt_nmi_seq). At its exit, it also increments the same counter. By
reading this counter it can be seen how many times that function was called
(dividing by 2), and, if the function is still being executed, by checking
the idt_nmi_seq's least significant bit.
On the check side (nmi_backtrace_stall_check()), that variable is queried
to check if the NMI is still being executed, but, there is a mistake in the
bitwise operation. That code wants to check if the least significant bit of
the idt_nmi_seq is set or not, but does the opposite, and checks for all
the other bits, which will always be true after the first exc_nmi()
executed successfully.
This appends the misleading string to the dump "(CPU currently in NMI
handler function)"
Fix it by checking the least significant bit, and if it is set, append the
string.
Fixes: 344da544f177 ("x86/nmi: Print reasons why backtrace NMIs are ignored")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207165237.1048837-1-leitao@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a51ab63b297ce9e26e3ffb9be896018a42d5f32f ]
As there are some AMD processors which only support CPPC V2 firmware and
BIOS implementation, the amd_pstate driver will be failed to load when
system booting with below kernel warning message:
[ 0.477523] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
To make the amd_pstate driver can be loaded on those TR40 processors, it
needs to match x86_model from 0x30 to 0x7F for family 17H.
With the change, the system can load amd_pstate driver as expected.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Gino Badouri <badouri.g@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218171
Fixes: fbd74d1689 ("ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory")
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2427e70c1630d98966375fffc2b713ab9768a94 ]
The mba_MBps feedback loop increases throttling when a group is using
more bandwidth than the target set by the user in the schemata file, and
decreases throttling when below target.
To avoid possibly stepping throttling up and down on every poll a flag
"delta_comp" is set whenever throttling is changed to indicate that the
actual change in bandwidth should be recorded on the next poll in
"delta_bw". Throttling is only reduced if the current bandwidth plus
delta_bw is below the user target.
This algorithm works well if the workload has steady bandwidth needs.
But it can go badly wrong if the workload moves to a different phase
just as the throttling level changed. E.g. if the workload becomes
essentially idle right as throttling level is increased, the value
calculated for delta_bw will be more or less the old bandwidth level.
If the workload then resumes, Linux may never reduce throttling because
current bandwidth plus delta_bw is above the target set by the user.
Implement a simpler heuristic by assuming that in the worst case the
currently measured bandwidth is being controlled by the current level of
throttling. Compute how much it may increase if throttling is relaxed to
the next higher level. If that is still below the user target, then it
is ok to reduce the amount of throttling.
Fixes: ba0f26d8529c ("x86/intel_rdt/mba_sc: Prepare for feedback loop")
Reported-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xiaochen Shen <xiaochen.shen@intel.com>
Link: https://lore.kernel.org/r/20240122180807.70518-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54e35eb8611cce5550d3d7689679b1a91c864f28 ]
If the BMEC (Bandwidth Monitoring Event Configuration) feature is
supported, the bandwidth events can be configured. The maximum supported
bandwidth bitmask can be read from CPUID:
CPUID_Fn80000020_ECX_x03 [Platform QoS Monitoring Bandwidth Event Configuration]
Bits Description
31:7 Reserved
6:0 Identifies the bandwidth sources that can be tracked.
While at it, move the mask checking to mon_config_write() before
iterating over all the domains. Also, print the valid bitmask when the
user tries to configure invalid event configuration value.
The CPUID details are documented in the Processor Programming Reference
(PPR) Vol 1.1 for AMD Family 19h Model 11h B1 - 55901 Rev 0.25 in the
Link tag.
Fixes: dc2a3e857981 ("x86/resctrl: Add interface to read mbm_total_bytes_config")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/669896fa512c7451319fa5ca2fdb6f7e015b5635.1705359148.git.babu.moger@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0976783bb123f30981bc1e7a14d9626a6f63aeac ]
The QOS Memory Bandwidth Enforcement Limit is reported by
CPUID_Fn80000020_EAX_x01 and CPUID_Fn80000020_EAX_x02:
Bits Description
31:0 BW_LEN: Size of the QOS Memory Bandwidth Enforcement Limit.
Newer processors can support higher bandwidth limit than the current
hard-coded value. Remove latter and detect using CPUID instead. Also,
update the register variables eax and edx to match the AMD CPUID
definition.
The CPUID details are documented in the Processor Programming Reference
(PPR) Vol 1.1 for AMD Family 19h Model 11h B1 - 55901 Rev 0.25 in the
Link tag below.
Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/c26a8ca79d399ed076cf8bf2e9fbc58048808289.1705359148.git.babu.moger@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8076fcde016c9c0e0660543e67bff86cb48a7c9c upstream.
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.
Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.
Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.
For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e95df4ec0c0c9791941f112db699fae794b9862a upstream.
Currently MMIO Stale Data mitigation for CPUs not affected by MDS/TAA is
to only deploy VERW at VMentry by enabling mmio_stale_data_clear static
branch. No mitigation is needed for kernel->user transitions. If such
CPUs are also affected by RFDS, its mitigation may set
X86_FEATURE_CLEAR_CPU_BUF to deploy VERW at kernel->user and VMentry.
This could result in duplicate VERW at VMentry.
Fix this by disabling mmio_stale_data_clear static branch when
X86_FEATURE_CLEAR_CPU_BUF is enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6613d82e617dd7eb8b0c40b2fe3acea655b1d611 upstream.
The VERW mitigation at exit-to-user is enabled via a static branch
mds_user_clear. This static branch is never toggled after boot, and can
be safely replaced with an ALTERNATIVE() which is convenient to use in
asm.
Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user
path. Also remove the now redundant VERW in exc_nmi() and
arch_exit_to_user_mode().
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6890cb1ace350b4386c8aee1343dc3b3ddd214da upstream.
MKTME repurposes the high bit of physical address to key id for encryption
key and, even though MAXPHYADDR in CPUID[0x80000008] remains the same,
the valid bits in the MTRR mask register are based on the reduced number
of physical address bits.
detect_tme() in arch/x86/kernel/cpu/intel.c detects TME and subtracts
it from the total usable physical bits, but it is called too late.
Move the call to early_init_intel() so that it is called in setup_arch(),
before MTRRs are setup.
This fixes boot on TDX-enabled systems, which until now only worked with
"disable_mtrr_cleanup". Without the patch, the values written to the
MTRRs mask registers were 52-bit wide (e.g. 0x000fffff_80000800) and
the writes failed; with the patch, the values are 46-bit wide, which
matches the reduced MAXPHYADDR that is shown in /proc/cpuinfo.
Reported-by: Zixi Chen <zixchen@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-3-pbonzini%40redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fd817c906503b6813ea3b41f5fdf4192449a707 upstream.
SETUP_RNG_SEED in setup_data is supplied by kexec and should
not be reserved in the e820 map.
Doing so reserves 16 bytes of RAM when booting with kexec.
(16 bytes because data->len is zeroed by parse_setup_data so only
sizeof(setup_data) is reserved.)
When kexec is used repeatedly, each boot adds two entries in the
kexec-provided e820 map as the 16-byte range splits a larger
range of usable memory. Eventually all of the 128 available entries
get used up. The next split will result in losing usable memory
as the new entries cannot be added to the e820 map.
Fixes: 68b8e9713c8e ("x86/setup: Use rng seeds from setup_data")
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZbmOjKnARGiaYBd5@dwarf.suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04c3024560d3a14acd18d0a51a1d0a89d29b7eb5 upstream.
AMD does not have the requirement for a synchronization barrier when
acccessing a certain group of MSRs. Do not incur that unnecessary
penalty there.
There will be a CPUID bit which explicitly states that a MFENCE is not
needed. Once that bit is added to the APM, this will be extended with
it.
While at it, move to processor.h to avoid include hell. Untangling that
file properly is a matter for another day.
Some notes on the performance aspect of why this is relevant, courtesy
of Kishon VijayAbraham <Kishon.VijayAbraham@amd.com>:
On a AMD Zen4 system with 96 cores, a modified ipi-bench[1] on a VM
shows x2AVIC IPI rate is 3% to 4% lower than AVIC IPI rate. The
ipi-bench is modified so that the IPIs are sent between two vCPUs in the
same CCX. This also requires to pin the vCPU to a physical core to
prevent any latencies. This simulates the use case of pinning vCPUs to
the thread of a single CCX to avoid interrupt IPI latency.
In order to avoid run-to-run variance (for both x2AVIC and AVIC), the
below configurations are done:
1) Disable Power States in BIOS (to prevent the system from going to
lower power state)
2) Run the system at fixed frequency 2500MHz (to prevent the system
from increasing the frequency when the load is more)
With the above configuration:
*) Performance measured using ipi-bench for AVIC:
Average Latency: 1124.98ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.6759M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1172.42ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 40.9432M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
From above, x2AVIC latency is ~4% more than AVIC. However, the expectation is
x2AVIC performance to be better or equivalent to AVIC. Upon analyzing
the perf captures, it is observed significant time is spent in
weak_wrmsr_fence() invoked by x2apic_send_IPI().
With the fix to skip weak_wrmsr_fence()
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1117.44ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.9608M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
Comparing the performance of x2AVIC with and without the fix, it can be seen
the performance improves by ~4%.
Performance captured using an unmodified ipi-bench using the 'mesh-ipi' option
with and without weak_wrmsr_fence() on a Zen4 system also showed significant
performance improvement without weak_wrmsr_fence(). The 'mesh-ipi' option ignores
CCX or CCD and just picks random vCPU.
Average throughput (10 iterations) with weak_wrmsr_fence(),
Cumulative throughput: 4933374 IPI/s
Average throughput (10 iterations) without weak_wrmsr_fence(),
Cumulative throughput: 6355156 IPI/s
[1] https://github.com/bytedance/kvm-utils/tree/master/microbenchmark/ipi-bench
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230622095212.20940-1-bp@alien8.de
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d877550eaf2dc9090d782864c96939397a3c6835 upstream.
Before this change, the expected size of the user space buffer was
taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed
from user-space, so it is possible construct a sigreturn frame where:
* fx_sw->xstate_size is smaller than the size required by valid bits in
fx_sw->xfeatures.
* user-space unmaps parts of the sigrame fpu buffer so that not all of
the buffer required by xrstor is accessible.
In this case, xrstor tries to restore and accesses the unmapped area
which results in a fault. But fault_in_readable succeeds because buf +
fx_sw->xstate_size is within the still mapped area, so it goes back and
tries xrstor again. It will spin in this loop forever.
Instead, fault in the maximum size which can be touched by XRSTOR (taken
from fpstate->user_size).
[ dhansen: tweak subject / changelog ]
Fixes: fcb3635f5018 ("x86/fpu/signal: Handle #PF in the direct restore path")
Reported-by: Konstantin Bogomolov <bogomolov@google.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240130063603.3392627-1-avagin%40google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9f3b130048bfa2e44a8cfb1b616f826d9d5d8188 ]
Memory errors don't happen very often, especially fatal ones. However,
in large-scale scenarios such as data centers, that probability
increases with the amount of machines present.
When a fatal machine check happens, mce_panic() is called based on the
severity grading of that error. The page containing the error is not
marked as poison.
However, when kexec is enabled, tools like makedumpfile understand when
pages are marked as poison and do not touch them so as not to cause
a fatal machine check exception again while dumping the previous
kernel's memory.
Therefore, mark the page containing the error as poisoned so that the
kexec'ed kernel can avoid accessing the page.
[ bp: Rewrite commit message and comment. ]
Co-developed-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Link: https://lore.kernel.org/r/20231014051754.3759099-1-zhiquan1.li@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cef9ecc8e938dd48a560f7dd9be1246359248d20 upstream.
Specs don't say anything about UIP being cleared within 10ms. They
only say that UIP won't occur for another 244uS. If a long NMI occurs
while UIP is still updating it might not be possible to get valid
data in 10ms.
This has been observed in the wild that around s2idle some calls can
take up to 480ms before UIP is clear.
Adjust callers from outside an interrupt context to wait for up to a
1s instead of 10ms.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 120931db07b49252aba2073096b595482d71857c upstream.
The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().
If UIP timeout is configured by caller to be >=100 ms and a call
takes this long, log a warning.
Make all callers use 10ms to ensure no functional changes.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c6d984f523f67ecfad1083bb04c55d91977bb15 upstream.
kvm_guest_cpu_offline() tries to disable kvmclock regardless if it is
present in the VM. It leads to write to a MSR that doesn't exist on some
configurations, namely in TDX guest:
unchecked MSR access error: WRMSR to 0x12 (tried to write 0x0000000000000000)
at rIP: 0xffffffff8110687c (kvmclock_disable+0x1c/0x30)
kvmclock enabling is gated by CLOCKSOURCE and CLOCKSOURCE2 KVM paravirt
features.
Do not disable kvmclock if it was not enabled.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: c02027b5742b ("x86/kvm: Disable kvmclock on all CPUs on shutdown")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Message-Id: <20231205004510.27164-6-kirill.shutemov@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6175b407756b22e7fdc771181b7d832ebdedef5c ]
AMD systems generally allow MCA "simulation" where MCA registers can be
written with valid data and the full MCA handling flow can be tested by
software.
However, the platform on Scalable MCA systems, can prevent software from
writing data to the MCA registers. There is no architectural way to
determine this configuration. Therefore, the MCE injection module will
check for this behavior by writing and reading back a test status value.
This is done during module init, and the check can run on any CPU with
any valid MCA bank.
If MCA_STATUS writes are ignored by the platform, then there are no side
effects on the hardware state.
If the writes are not ignored, then the test status value will remain in
the hardware MCA_STATUS register. It is likely that the value will not
be overwritten by hardware or software, since the tested CPU and bank
are arbitrary. Therefore, the user may see a spurious, synthetic MCA
error reported whenever MCA is polled for this CPU.
Clear the test value immediately after writing it. It is very unlikely
that a valid MCA error is logged by hardware during the test. Errors
that cause an #MC won't be affected.
Fixes: 891e465a1bd8 ("x86/mce: Check whether writes to MCA_STATUS are getting ignored")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231118193248.1296798-2-yazen.ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
No relevant upstream kernel due to refactoring in 6.7
Builtin/initrd microcode will not be used the ucode loader is disabled.
But currently, save_microcode_in_initrd is always performed and it
accesses MSR_IA32_UCODE_REV even if dis_ucode_ldr is true, and in
particular even if X86_FEATURE_HYPERVISOR is set; the TDX module does not
implement the MSR and the result is a call trace at boot for TDX guests.
Mainline Linux fixed this as part of a more complex rework of microcode
caching that went into 6.7 (see in particular commits dd5e3e3ca6,
"x86/microcode/intel: Simplify early loading"; and a7939f0167203,
"x86/microcode/amd: Cache builtin/initrd microcode early"). Do the bare
minimum in stable kernels, setting initrd_gone just like mainline Linux
does in mark_initrd_gone().
Note that save_microcode_in_initrd() is not in the microcode application
path, which runs with paging disabled on 32-bit systems, so it can (and
has to) use dis_ucode_ldr instead of check_loader_disabled_ap().
Cc: stable@vger.kernel.org # v6.6+
Cc: x86@kernel.org # v6.6+
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kprobe_emulate_call_indirect
commit f5d03da48d062966c94f0199d20be0b3a37a7982 upstream.
kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate
indirect calls. However, int3_emulate_call always assumes the size of
the call to be 5 bytes when calculating the return address. This is
incorrect for register-based indirect calls in x86, which can be either
2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime,
the incorrect return address causes control flow to land onto the wrong
place after return -- possibly not a valid instruction boundary. This
can lead to a panic like the following:
[ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8
[ 7.308883][ C1] #PF: supervisor read access in kernel mode
[ 7.309168][ C1] #PF: error_code(0x0000) - not-present page
[ 7.309461][ C1] PGD 0 P4D 0
[ 7.309652][ C1] Oops: 0000 [#1] SMP
[ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6
[ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0
[ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 7.316948][ C1] Call Trace:
[ 7.317123][ C1] <IRQ>
[ 7.317279][ C1] ? __die_body+0x64/0xb0
[ 7.317482][ C1] ? page_fault_oops+0x248/0x370
[ 7.317712][ C1] ? __wake_up+0x96/0xb0
[ 7.317964][ C1] ? exc_page_fault+0x62/0x130
[ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30
[ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10
[ 7.318860][ C1] ? default_idle+0xb/0x10
[ 7.319063][ C1] ? __common_interrupt+0x52/0xc0
[ 7.319330][ C1] common_interrupt+0x78/0x90
[ 7.319546][ C1] </IRQ>
[ 7.319679][ C1] <TASK>
[ 7.319854][ C1] asm_common_interrupt+0x22/0x40
[ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10
[ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9
[ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256
[ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c
[ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c
[ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2
[ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000
[ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000
[ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10
[ 7.324239][ C1] default_idle_call+0x31/0x50
[ 7.324464][ C1] do_idle+0xd3/0x240
[ 7.324690][ C1] cpu_startup_entry+0x25/0x30
[ 7.324983][ C1] start_secondary+0xb4/0xc0
[ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b
[ 7.325498][ C1] </TASK>
[ 7.325641][ C1] Modules linked in:
[ 7.325906][ C1] CR2: 000000000002b4d8
[ 7.326104][ C1] ---[ end trace 0000000000000000 ]---
[ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0
[ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt
[ 7.332730][ C1] Kernel Offset: disabled
[ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
The relevant assembly code is (from objdump, faulting address
highlighted):
ffffffff8102ed9d: 41 ff d3 call *%r11
ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax
The emulation incorrectly sets the return address to be ffffffff8102ed9d
+ 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next
mov. This in turn causes incorrect subsequent instruction decoding and
eventually triggers the page fault above.
Instead of invoking int3_emulate_call, perform push and jmp emulation
directly in kprobe_emulate_call_indirect. At this point we can obtain
the instruction size from p->ainsn.size so that we can calculate the
correct return address.
Link: https://lore.kernel.org/all/20240102233345.385475-1-jinghao7@illinois.edu/
Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Cc: stable@vger.kernel.org
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69a7386c1ec25476a0c78ffeb59de08a2a08f495 upstream.
Chris reported that a Dell PowerEdge T340 system stopped to boot when upgrading
to a kernel which contains the parallel hotplug changes. Disabling parallel
hotplug on the kernel command line makes it boot again.
It turns out that the Dell BIOS has x2APIC enabled and the boot CPU comes up in
X2APIC mode, but the APs come up inconsistently in xAPIC mode.
Parallel hotplug requires that the upcoming CPU reads out its APIC ID from the
local APIC in order to map it to the Linux CPU number.
In this particular case the readout on the APs uses the MMIO mapped registers
because the BIOS failed to enable x2APIC mode. That readout results in a page
fault because the kernel does not have the APIC MMIO space mapped when X2APIC
mode was enabled by the BIOS on the boot CPU and the kernel switched to X2APIC
mode early. That page fault can't be handled on the upcoming CPU that early and
results in a silent boot failure.
If parallel hotplug is disabled the system boots because in that case the APIC
ID read is not required as the Linux CPU number is provided to the AP in the
smpboot control word. When the kernel uses x2APIC mode then the APs are
switched to x2APIC mode too slightly later in the bringup process, but there is
no reason to do it that late.
Cure the BIOS bogosity by checking in the parallel bootup path whether the
kernel uses x2APIC mode and if so switching over the APs to x2APIC mode before
the APIC ID readout.
Fixes: 0c7ffa32dbd6 ("x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it")
Reported-by: Chris Lindee <chris.lindee@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Chris Lindee <chris.lindee@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CA%2B2tU59853R49EaU_tyvOZuOTDdcU0RshGyydccp9R1NX9bEeQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2dc4196138055eb0340231aecac4d78c2ec2bea5 upstream.
apply_alternatives() treats alternatives with the ALT_FLAG_NOT flag set
special as it optimizes the existing NOPs in place.
Unfortunately, this happens with interrupts enabled and does not provide any
form of core synchronization.
So an interrupt hitting in the middle of the update and using the affected code
path will observe a half updated NOP and crash and burn. The following
3 NOP sequence was observed to expose this crash halfway reliably under QEMU
32bit:
0x90 0x90 0x90
which is replaced by the optimized 3 byte NOP:
0x8d 0x76 0x00
So an interrupt can observe:
1) 0x90 0x90 0x90 nop nop nop
2) 0x8d 0x90 0x90 undefined
3) 0x8d 0x76 0x90 lea -0x70(%esi),%esi
4) 0x8d 0x76 0x00 lea 0x0(%esi),%esi
Where only #1 and #4 are true NOPs. The same problem exists for 64bit obviously.
Disable interrupts around this NOP optimization and invoke sync_core()
before re-enabling them.
Fixes: 270a69c4485d ("x86/alternative: Support relocations in alternatives")
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ea1704a92967834bf0e64ca1205db4680d04048 upstream.
text_poke_early() does:
local_irq_save(flags);
memcpy(addr, opcode, len);
local_irq_restore(flags);
sync_core();
That's not really correct because the synchronization should happen before
interrupts are re-enabled to ensure that a pending interrupt observes the
complete update of the opcodes.
It's not entirely clear whether the interrupt entry provides enough
serialization already, but moving the sync_core() invocation into interrupt
disabled region does no harm and is obviously correct.
Fixes: 6fffacb30349 ("x86/alternatives, jumplabel: Use text_poke_early() before mm_init()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b8493dc43044376716d789d07699f17d538a7c4 upstream.
Commit in Fixes added an AMD-specific microcode callback. However, it
didn't check the CPU vendor the kernel runs on explicitly.
The only reason the Zenbleed check in it didn't run on other x86 vendors
hardware was pure coincidental luck:
if (!cpu_has_amd_erratum(c, amd_zenbleed))
return;
gives true on other vendors because they don't have those families and
models.
However, with the removal of the cpu_has_amd_erratum() in
05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function")
that coincidental condition is gone, leading to the zenbleed check
getting executed on other vendors too.
Add the explicit vendor check for the whole callback as it should've
been done in the first place.
Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Cc: <stable@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 27d25348d42161837be08fc63b04a2559d2e781c ]
A write-access violation page fault kernel crash was observed while running
cpuhotplug LTP testcases on SEV-ES enabled systems. The crash was
observed during hotplug, after the CPU was offlined and the process
was migrated to different CPU. setup_ghcb() is called again which
tries to update ghcb_version in sev_es_negotiate_protocol(). Ideally this
is a read_only variable which is initialised during booting.
Trying to write it results in a pagefault:
BUG: unable to handle page fault for address: ffffffffba556e70
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
[ ...]
Call Trace:
<TASK>
? __die_body.cold+0x1a/0x1f
? __die+0x2a/0x35
? page_fault_oops+0x10c/0x270
? setup_ghcb+0x71/0x100
? __x86_return_thunk+0x5/0x6
? search_exception_tables+0x60/0x70
? __x86_return_thunk+0x5/0x6
? fixup_exception+0x27/0x320
? kernelmode_fixup_or_oops+0xa2/0x120
? __bad_area_nosemaphore+0x16a/0x1b0
? kernel_exc_vmm_communication+0x60/0xb0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x7a/0x90
? exc_page_fault+0xbd/0x160
? asm_exc_page_fault+0x27/0x30
? setup_ghcb+0x71/0x100
? setup_ghcb+0xe/0x100
cpu_init_exception_handling+0x1b9/0x1f0
The fix is to call sev_es_negotiate_protocol() only in the BSP boot phase,
and it only needs to be done once in any case.
[ mingo: Refined the changelog. ]
Fixes: 95d33bfaa3e1 ("x86/sev: Register GHCB memory when SEV-SNP is active")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/1701254429-18250-1-git-send-email-kashwindayan@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ upstream commit be5341eb0d43b1e754799498bd2e8756cc167a41 ]
There is no real reason to have a separate ASM entry point implementation
for the legacy INT 0x80 syscall emulation on 64-bit.
IDTENTRY provides all the functionality needed with the only difference
that it does not:
- save the syscall number (AX) into pt_regs::orig_ax
- set pt_regs::ax to -ENOSYS
Both can be done safely in the C code of an IDTENTRY before invoking any of
the syscall related functions which depend on this convention.
Aside of ASM code reduction this prepares for detecting and handling a
local APIC injected vector 0x80.
[ kirill.shutemov: More verbose comments ]
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 351236947a45a512c517153bbe109fe868d05e6d upstream.
Simplify the code flow a bit by moving the retbleed IBPB check into the
existing 'has_microcode' block.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/0a22b86b1f6b07f9046a9ab763fc0e0d1b7a91d4.1693889988.git.jpoimboe@kernel.org
Cc: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee545b94d39a00c93dc98b1dbcbcf731d2eadeb4 upstream.
Hygon processors with a model ID > 3 have CPUID leaf 0xB correctly
populated and don't need the fixed package ID shift workaround. The fixup
is also incorrect when running in a guest.
Fixes: e0ceeae708ce ("x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors")
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_594804A808BD93A4EBF50A994F228E3A7F07@qq.com
Link: https://lore.kernel.org/r/20230814085112.089607918@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b56ebe7c896dc78b5865ec2c4b1dae3c93537517 upstream.
commit ef8dd01538ea ("genirq/msi: Make interrupt allocation less
convoluted"), reworked the code so that the x86 specific quirk for affinity
setting of non-maskable PCI/MSI interrupts is not longer activated if
necessary.
This could be solved by restoring the original logic in the core MSI code,
but after a deeper analysis it turned out that the quirk flag is not
required at all.
The quirk is only required when the PCI/MSI device cannot mask the MSI
interrupts, which in turn also prevents reservation mode from being enabled
for the affected interrupt.
This allows ot remove the NOMASK quirk bit completely as msi_set_affinity()
can instead check whether reservation mode is enabled for the interrupt,
which gives exactly the same answer.
Even in the momentary non-existing case that the reservation mode would be
not set for a maskable MSI interrupt this would not cause any harm as it
just would cause msi_set_affinity() to go needlessly through the
functionaly equivalent slow path, which works perfectly fine with maskable
interrupts as well.
Rework msi_set_affinity() to query the reservation mode and remove all
NOMASK quirk logic from the core code.
[ tglx: Massaged changelog ]
Fixes: ef8dd01538ea ("genirq/msi: Make interrupt allocation less convoluted")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026032036.2462428-1-den@valinux.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31255e072b2e91f97645d792d25b2db744186dd1 upstream.
When a signal is being delivered, the kernel needs to make accesses to
userspace. These accesses could encounter an access error, in which case
the signal delivery itself will trigger a segfault. Usually this would
result in the kernel killing the process. But in the case of a SEGV signal
handler being configured, the failure of the first signal delivery will
result in *another* signal getting delivered. The second signal may
succeed if another thread has resolved the issue that triggered the
segfault (i.e. a well timed mprotect()/mmap()), or the second signal is
being delivered to another stack (i.e. an alt stack).
On x86, in the non-shadow stack case, all the accesses to userspace are
done before changes to the registers (in pt_regs). The operation is
aborted when an access error occurs, so although there may be writes done
for the first signal, control flow changes for the signal (regs->ip,
regs->sp, etc) are not committed until all the accesses have already
completed successfully. This means that the second signal will be
delivered as if it happened at the time of the first signal. It will
effectively replace the first aborted signal, overwriting the half-written
frame of the aborted signal. So on sigreturn from the second signal,
control flow will resume happily from the point of control flow where the
original signal was delivered.
The problem is, when shadow stack is active, the shadow stack SSP
register/MSR is updated *before* some of the userspace accesses. This
means if the earlier accesses succeed and the later ones fail, the second
signal will not be delivered at the same spot on the shadow stack as the
first one. So on sigreturn from the second signal, the SSP will be
pointing to the wrong location on the shadow stack (off by a frame).
Pengfei privately reported that while using a shadow stack enabled glibc,
the “signal06” test in the LTP test-suite hung. It turns out it is
testing the above described double signal scenario. When this test was
compiled with shadow stack, the first signal pushed a shadow stack
sigframe, then the second pushed another. When the second signal was
handled, the SSP was at the first shadow stack signal frame instead of
the original location. The test then got stuck as the #CP from the twice
incremented SSP was incorrect and generated segfaults in a loop.
Fix this by adjusting the SSP register only after any userspace accesses,
such that there can be no failures after the SSP is adjusted. Do this by
moving the shadow stack sigframe push logic to happen after all other
userspace accesses.
Note, sigreturn (as opposed to the signal delivery dealt with in this
patch) has ordering behavior that could lead to similar failures. The
ordering issues there extend beyond shadow stack to include the alt stack
restoration. Fixing that would require cross-arch changes, and the
ordering today does not cause any known test or apps breakages. So leave
it as is, for now.
[ dhansen: minor changelog/subject tweak ]
Fixes: 05e36022c054 ("x86/shstk: Handle signals for shadow stack")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20231107182251.91276-1-rick.p.edgecombe%40intel.com
Link: https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/signal/signal06.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a565258b3f4bbdc7a3c09cd02082cb286a7bffc upstream.
Three PCI IDs for DF Function 4 were defined but not used.
Add them to the "link" list.
Fixes: f8faf3496633 ("x86/amd_nb: Add AMD PCI IDs for SMN communication")
Fixes: 23a5b8bb022c ("x86/amd_nb: Add PCI ID for family 19h model 78h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803150430.3542854-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f44075ecafb726830e63d33fbca29413149eeeb8 ]
The ->idt_seq and ->recv_jiffies variables added by:
1a3ea611fc10 ("x86/nmi: Accumulate NMI-progress evidence in exc_nmi()")
... place the exit-time check of the bottom bit of ->idt_seq after the
this_cpu_dec_return() that re-enables NMI nesting. This can result in
the following sequence of events on a given CPU in kernels built with
CONFIG_NMI_CHECK_CPU=y:
o An NMI arrives, and ->idt_seq is incremented to an odd number.
In addition, nmi_state is set to NMI_EXECUTING==1.
o The NMI is processed.
o The this_cpu_dec_return(nmi_state) zeroes nmi_state and returns
NMI_EXECUTING==1, thus opting out of the "goto nmi_restart".
o Another NMI arrives and ->idt_seq is incremented to an even
number, triggering the warning. But all is just fine, at least
assuming we don't get so many closely spaced NMIs that the stack
overflows or some such.
Experience on the fleet indicates that the MTBF of this false positive
is about 70 years. Or, for those who are not quite that patient, the
MTBF appears to be about one per week per 4,000 systems.
Fix this false-positive warning by moving the "nmi_restart" label before
the initial ->idt_seq increment/check and moving the this_cpu_dec_return()
to follow the final ->idt_seq increment/check. This way, all nested NMIs
that get past the NMI_NOT_RUNNING check get a clean ->idt_seq slate.
And if they don't get past that check, they will set nmi_state to
NMI_LATCHED, which will cause the this_cpu_dec_return(nmi_state)
to restart.
Fixes: 1a3ea611fc10 ("x86/nmi: Accumulate NMI-progress evidence in exc_nmi()")
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/0cbff831-6e3d-431c-9830-ee65ee7787ff@paulmck-laptop
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 965e05ff8af98c44f9937366715c512000373164 ]
The SMT control mechanism got added as speculation attack vector
mitigation. The implemented logic relies on the primary thread mask to
be set up properly.
This turns out to be an issue with XEN/PV guests because their CPU hotplug
mechanics do not enumerate APICs and therefore the mask is never correctly
populated.
This went unnoticed so far because by chance XEN/PV ends up with
smp_num_siblings == 2. So cpu_smt_control stays at its default value
CPU_SMT_ENABLED and the primary thread mask is never evaluated in the
context of CPU hotplug.
This stopped "working" with the upcoming overhaul of the topology
evaluation which legitimately provides a fake topology for XEN/PV. That
sets smp_num_siblings to 1, which causes the core CPU hot-plug core to
refuse to bring up the APs.
This happens because cpu_smt_control is set to CPU_SMT_NOT_SUPPORTED which
causes cpu_bootable() to evaluate the unpopulated primary thread mask with
the conclusion that all non-boot CPUs are not valid to be plugged.
The core code has already been made more robust against this kind of fail,
but the primary thread mask really wants to be populated to avoid other
issues all over the place.
Just fake the mask by pretending that all XEN/PV vCPUs are primary threads,
which is consistent because all of XEN/PVs topology is fake or non-existent.
Fixes: 6a4d2657e048 ("x86/smp: Provide topology_is_primary_thread()")
Fixes: f54d4434c281 ("x86/apic: Provide cpu_primary_thread mask")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.210011520@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 001470fed5959d01faecbd57fcf2f60294da0de1 ]
Since the size value is added to the base address to yield the last valid
byte address of the GDT, the current size value of startup_gdt_descr is
incorrect (too large by one), fix it.
[ mingo: This probably never mattered, because startup_gdt[] is only used
in a very controlled fashion - but make it consistent nevertheless. ]
Fixes: 866b556efa12 ("x86/head/64: Install startup GDT")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20230807084547.217390-1-ytcoode@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc6306ad5b0dda040baf1fde3cfd458e6abfc4da ]
The SRSO default safe-ret mitigation is reported as "mitigated" even if
microcode hasn't been updated. That's wrong because userspace may still
be vulnerable to SRSO attacks due to IBPB not flushing branch type
predictions.
Report the safe-ret + !microcode case as vulnerable.
Also report the microcode-only case as vulnerable as it leaves the
kernel open to attacks.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/a8a14f97d1b0e03ec255c81637afdf4cf0ae9c99.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de9f5f7b06a5b7adbfdd8016f011120a4e928add ]
When overriding the requested mitigation with IBPB due to retbleed=ibpb,
print the mitigation in the usual format instead of a custom error
message.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ec3af919e267773d896c240faf30bfc6a1fd6304.1693889988.git.jpoimboe@kernel.org
Stable-dep-of: dc6306ad5b0d ("x86/srso: Fix vulnerability reporting for missing microcode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d1142ac51307145dbb256ac3535a1d43a1c9800 ]
Make the SBPB check more robust against the (possible) case where future
HW has SRSO fixed but doesn't have the SRSO_NO bit set.
Fixes: 1b5277c0ea0b ("x86/srso: Add SRSO_NO support")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/cee5050db750b391c9f35f5334f8ff40e66c01b9.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
|
|
Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:
tsc: Marking TSC unstable due to check_tsc_sync_source failed
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock_irqsave+0x3f/0x60
clocksource_mark_unstable+0x1b/0x90
mark_tsc_unstable+0x41/0x50
check_tsc_sync_source+0x14f/0x180
sysvec_call_function_single+0x69/0x90
Possible unsafe locking scenario:
lock(watchdog_lock);
<Interrupt>
lock(watchdog_lock);
stack backtrace:
_raw_spin_lock+0x30/0x40
clocksource_watchdog+0x23/0x5a0
run_timer_softirq+0x2a/0x50
sysvec_apic_timer_interrupt+0x6e/0x90
The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().
clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,
Before that change the synchronization function was invoked in thread
context so this could not happen.
As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.
Fixes: 9d349d47f0e3 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx
|
|
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
|
|
//git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Take care of a race between when the #VC exception is raised and when
the guest kernel gets to emulate certain instructions in SEV-{ES,SNP}
guests by:
- disabling emulation of MMIO instructions when coming from user mode
- checking the IO permission bitmap before emulating IO instructions
and verifying the memory operands of INS/OUTS insns"
* tag 'sev_fixes_for_v6.6' of //git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Check for user-space IOIO pointing to kernel space
x86/sev: Check IOBM for IOIO exceptions from user-space
x86/sev: Disable MMIO emulation from user mode
|
|
Check the memory operand of INS/OUTS before emulating the instruction.
The #VC exception can get raised from user-space, but the memory operand
can be manipulated to access kernel memory before the emulation actually
begins and after the exception handler has run.
[ bp: Massage commit message. ]
Fixes: 597cfe48212a ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented
- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build
s390:
- One small fix for gisa to avoid stalls
x86:
- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software
- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt
- Fix for loading XSAVE state from an old kernel into a new one
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert
statements
- Clean up stale test metadata
- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...
|
|
This reverts commit 45e34c8af58f23db4474e2bfe79183efec09a18b, and the
two subsequent fixes to it:
3f874c9b2aae ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
b1472a60a584 ("x86/smp: Don't send INIT to boot CPU")
because it seems to result in hung machines at shutdown. Particularly
some Dell machines, but Thomas says
"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
at least that's what I could figure out from the various bug reports.
I don't know which CPUs the DELL machines have, so I can't say it's a
pattern.
I agree with the revert for now"
Ashok Raj chimes in:
"There was a report (probably this same one), and it turns out it was a
bug in the BIOS SMI handler.
The client BIOS's were waiting for the lowest APICID to be the SMI
rendevous master. If this is MeteorLake, the BSP wasn't the one with
the lowest APIC and it triped here.
The BIOS change is also being pushed to others for assimilation :)
Server BIOS's had this correctly for a while now"
and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).
Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"
* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration
|
|
Fei has reported that KASAN triggers during apply_alternatives() on
a 5-level paging machine:
BUG: KASAN: out-of-bounds in rcu_is_watching()
Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0
...
__asan_load4()
rcu_is_watching()
trace_hardirqs_on()
text_poke_early()
apply_alternatives()
...
On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57)
gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on
__VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled().
KASAN gets confused when apply_alternatives() patches the
KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START
static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue.
Fix it for real by disabling KASAN while the kernel is patching alternatives.
[ mingo: updated the changelog ]
Fixes: 6657fca06e3f ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y")
Reported-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com
|
