| Age | Commit message (Collapse) | Author |
|---|
|
Provide the s390 specific native set_memory_rox() implementation to avoid
frequent set_memory_ro(); set_memory_x() call pairs.
This is the s390 variant of commit 60463628c9e0 ("x86/mm: Implement native
set_memory_rox()").
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Just like other architectures provide a kaslr_enabled() function, instead
of directly accessing a global variable.
Also pass the renamed __kaslr_enabled variable from the decompressor to the
kernel, so that kalsr_enabled() is available there too. This will be used
by a subsequent patch which randomizes the module base load address.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit dfe843dce775 ("s390/checksum: support GENERIC_CSUM, enable it for
KASAN") switched s390 to use the generic checksum functions, so that KASAN
instrumentation also works checksum functions by avoiding architecture
specific inline assemblies.
There is however the problem that the generic csum_partial() function
returns a 32 bit value with a 16 bit folded checksum, while the original
s390 variant does not fold to 16 bit. This in turn causes that the
ipib_checksum in lowcore contains different values depending on kernel
config options.
The ipib_checksum is used by system dumpers to verify if pointers in
lowcore point to valid data. Verification is done by comparing checksum
values. The system dumpers still use 32 bit checksum values which are not
folded, and therefore the checksum verification fails (incorrectly).
Symptom is that reboot after dump does not work anymore when a KASAN
instrumented kernel is dumped.
Fix this by not using the generic checksum implementation. Instead add an
explicit kasan_check_read() so that KASAN knows about the read access from
within the inline assembly.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Fixes: dfe843dce775 ("s390/checksum: support GENERIC_CSUM, enable it for KASAN")
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add the internal logic to check for autoquiesce triggers and handle
them.
Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.
Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.
All events will be reported via DASD Extended Error Reporting (EER)
if configured.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As preparation for the stackleak feature move on_thread_stack() to
processor.h like x86.
Also make it __always_inline, and slightly optimize it by reading
current task's kernel stack pointer from lowcore.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There is no user left of call_on_stack_noreturn() - remove it.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Make STACK_INIT_OFFSET also available for assembler code, and
use it everywhere instead of open-coding it at several places.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
s390 can do more fine-grained handling of spurious TLB protection faults,
when there also is the PTE pointer available.
Therefore, pass on the PTE pointer to flush_tlb_fix_spurious_fault() as an
additional parameter.
This will add no functional change to other architectures, but those with
private flush_tlb_fix_spurious_fault() implementations need to be made
aware of the new parameter.
Link: https://lkml.kernel.org/r/20230306161548.661740-1-gerald.schaefer@linux.ibm.com
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This flag is used to process only fully populated sampling buffers
when an sampling event is stopped on a CPU. By default the last sampling
buffer is also scanned for samples even if the sampling block full
indicator is not set in the trailer entry of a sampling buffer page.
This flag can be set via perf_event_attr::config1 field. It was never
used and never documented. It is useless now.
With PERF_CPUM_SF_FULL_BLOCKS:
When a process is scheduled off the CPU, the sampling is stopped and
the samples are copied to the perf ring buffer and marked invalid.
When stopped at the last full sample buffer page (which is
achieved with the PERF_CPUM_SF_FULL_BLOCKS options), the hardware
sampling will resume at the first free sample entry in the current,
partially filled sample buffer.
Without PERF_CPUM_SF_FULL_BLOCKS (default behavior):
The partially filled last sample buffer is scanned and valid samples
are saved to the perf ring buffer. The valid samples are marked invalid.
The sampling is resumed when the process is scheduled on this CPU.
Again the hardware sampling will resume at the first free sample entry in
the current, partially filled sample buffer.
Now the next interrupt handler invocation scans the
full sample block and saves the valid samples to the ring buffer.
It omits the invalid samples at the top of the buffer.
The default behavior is fully sufficient, therefore remove this feature.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Implementation of the new functions for SE AP support:
bind, unbind and associate. There are two new sysfs
attributes for this:
/sys/devices/ap/cardxx/xx.yyyy/se_bind
/sys/devices/ap/cardxx/xx.yyyy/se_associate
Writing a 1 into the se_bind attribute triggers the
SE AP bind for this AP queue, writing a 0 into does
an unbind - that's a reset (RAPQ) with the F bit enabled.
The se_associate attribute needs an integer value in
range 0...2^16-1 written in. This is the index into a
secrets table feed into the ultravisor. For more details
please see the Architecture documents.
These both new ap queue attributes are only visible
inside a SE guest with SB (Secure Binding) available.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce two new low level functions ap_bapq() (calls
PQAP(BAPQ)) and ap_aapq (calls PQAP(AAPQ)). Both functions
are only meant to be used in SE environment with the SE
AP binding facility available.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Extent the ap inline functions ap_rapq() (calls PQAP(RAPQ))
and ap_zapq() (calls PQAP(ZAPQ)) with a new parameter to
enable the new architectured F bit which forces an
unassociate and/or unbind on a secure execution associated
and/or bound queue.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch introduces a new struct ap_tapq_gr2 which covers
the response in GR2 on TAPQ invocation. This makes it much
easier and less error-prone for the calling functions to
access the right field without shifting and masking.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This patch introduces an update to the ap_config_info
struct which is filled with the QCI subfunction. There
is a new bit apsb (short 'B') showing if the AP secure
bind facility is available. The patch also includes a
simple function ap_sb_available() wrapping this bit test.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The inline ap_dqap function does not return the number of
bytes actually written into the message buffer. The calling
code inspects the AP message header to figure out what kind
of AP message has been received and pulls the length
information from this header. This processing may not work
correctly in cases where only a fragment of the reply is
received.
With this patch the ap_dqap inline function now returns
the number of actually written bytes in the *length parameter.
So the calling function has a chance to compare the number of
received bytes against what the AP message header length
field states. This is especially useful in cases where a
message could only get partially received.
The low level reply processing functions needed some rework
to be able to catch this new length information and compare
it the right way. The rework also deals with some situations
where until now the reply length was not correctly calculated
and/or set.
All this has been heavily tested as the modifications on
the reply length information may affect crypto load.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since s390 kernel build does not support 32 bit build any
more there is no difference between long and long long.
So this patch reworks all occurrences of psmid (a 64 bit
value) to use unsigned long now.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use __ALIGN instead of open coded .align statement to make sure that
external expoline thunks follow global function alignment rules.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Make use of CONFIG_FUNCTION_ALIGNMENT which was introduced with commit
d49a0626216b ("arch: Introduce CONFIG_FUNCTION_ALIGNMENT").
Select FUNCTION_ALIGNMENT_8B for gcc in order to reflect gcc's default
function alignment. For all other compilers, which is only clang, select
a function alignment of 16 bytes which reflects the default function
alignment for clang.
Also change the __ALIGN define to follow whatever the value of
CONFIG_FUNCTION_ALIGNMENT is. This makes sure that the alignment of C and
assembler functions is the same.
In result everything still uses the default function alignment for both
compilers. However in addition this is now also true for all assembly
functions, so that all functions have a consistent alignment.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Vasily Gorbik says:
===================
Combine and generalize all methods for finding unused memory in
decompressor, while decreasing complexity, add memory holes support,
while improving error handling (especially in low-memory conditions)
and debug-ability.
===================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since regular paging structs are initialized in decompressor already
move KASAN shadow mapping to decompressor as well. This helps to avoid
allocating KASAN required memory in 1 large chunk, de-duplicate paging
structs creation code and start the uncompressed kernel with KASAN
instrumentation right away. This also allows to avoid all pitfalls
accidentally calling KASAN instrumented code during KASAN initialization.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Currently several approaches for finding unused memory in decompressor
are utilized. While "safe_addr" grows towards higher addresses, vmem
code allocates paging structures top down. The former requires careful
ordering. In addition to that ipl report handling code verifies potential
intersections with secure boot certificates on its own. Neither of two
approaches are memory holes aware and consistent with each other in low
memory conditions.
To solve that, existing approaches are generalized and combined
together, as well as online memory ranges are now taken into
consideration.
physmem_info has been extended to contain reserved memory ranges. New
set of functions allow to handle reserves and find unused memory.
All reserves and memory allocations are "typed". In case of out of
memory condition decompressor fails with detailed info on current
reserved ranges and usable online memory.
Linux version 6.2.0 ...
Kernel command line: ... mem=100M
Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000
Reserved memory ranges:
0000000000000000 0000000003e33000 DECOMPRESSOR
0000000003f00000 00000000057648a3 INITRD
00000000063e0000 00000000063e8000 VMEM
00000000063eb000 00000000063f4000 VMEM
00000000063f7800 0000000006400000 VMEM
0000000005800000 0000000006300000 KASAN
Usable online memory ranges (info source: sclp read info [3]):
0000000000000000 0000000006400000
Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d
Call Trace:
(sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c)
sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a
sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e
sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424
sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4
sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4
physmem_alloc_range allows to find free memory in specified range. It
should be used for one time allocations only like finding position for
amode31 and vmlinux.
physmem_alloc_top_down can be used just like physmem_alloc_range, but
it also allows multiple allocations per type and tries to merge sequential
allocations together. Which is useful for paging structures allocations.
If sequential allocations cannot be merged together they are "chained",
allowing easy per type reserved ranges enumeration and migration to
memblock later. Extra "struct reserved_range" allocated for chaining are
not tracked or reserved but rely on the fact that both
physmem_alloc_range and physmem_alloc_top_down search for free memory
only below current top down allocator position. All reserved ranges
should be transferred to memblock before memblock allocations are
enabled.
The startup code has been reordered to delay any memory allocations until
online memory ranges are detected and occupied memory ranges are marked as
reserved to be excluded from follow-up allocations.
Ipl report certificates are a special case, ipl report certificates list
is checked together with other memory reserves until certificates are
saved elsewhere.
KASAN required memory for shadow memory allocation and mapping is reserved
as 1 large chunk which is later passed to KASAN early initialization code.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In preparation to extending mem_detect with additional information like
reserved ranges rename it to more generic physmem_info. This new naming
also help to avoid confusion by using more exact terms like "physmem
online ranges", etc.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
check_image_bootable() has been introduced with commit 627c9b62058e
("s390/boot: block uncompressed vmlinux booting attempts") to make sure
that users don't try to boot uncompressed vmlinux ELF image in qemu. It
used to be possible quite some time ago. That commit prevented confusion
with uncompressed vmlinux image starting to boot and even printing
kernel messages until it crashed. Users might have tried to report the
problem without realizing they are doing something which was not intended.
Since commit f1d3c5323772 ("s390/boot: move sclp early buffer from fixed
address in asm to C") check_image_bootable() doesn't function properly
anymore, as well as booting uncompressed vmlinux image in qemu doesn't
really produce any output and crashes. Moving forward it doesn't make
sense to fix check_image_bootable() anymore, so simply remove it.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
gen_lpswe() contains a BUILD_BUG_ON() statement which depends on a function
parameter. If the compiler decides to generate a not inlined function this
will lead to a build error, even if all call sites pass a valid parameter.
To avoid this always inline gen_lpswe().
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There is no point in changing branch prediction state of a cpu shortly
before it enters stop state. Therefore remove __bpon().
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
s390_isolate_bp_guest() is unused. Remove it.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b00
("s390: run user space and KVM guests with modified branch prediction").
Given that there is no use case remove it again.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add empty command line parameter handling stubs to kernel for all
command line parameters which are handled in the decompressor. This
avoids invalid "Unknown kernel command line parameters" messages from
the kernel, and also avoids that these will be incorrectly passed to
user space. This caused already confusion, therefore add the empty
stubs
- Add missing phys_to_virt() handling to machine check handler
- Introduce and use a union to be used for zcrypt inline assemblies.
This makes sure that only a register wide member of the union is
passed as input and output parameter to inline assemblies, while
usual C code uses other members of the union to access bit fields of
it
- Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to
atomically read a 128-bit value from memory. This replaces the
(mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf
code. Currently gcc does not generate the used lpq instruction if
__READ_ONCE() is used for aligned 128-bit accesses, therefore use
this s390 specific helper
- Simplify machine check handler code if a task needs to be killed
because of e.g. register corruption due to a machine malfunction
- Perform CPU reset to clear pending interrupts and TLB entries on an
already stopped target CPU before delegating work to it
- Generate arch/s390/boot/vmlinux.map link map for the decompressor,
when CONFIG_VMLINUX_MAP is enabled for debugging purposes
- Fix segment type handling for dcssblk devices. It incorrectly always
returned type "READ/WRITE" even for read-only segements, which can
result in a kernel panic if somebody tries to write to a read-only
device
- Sort config S390 select list again
- Fix two kprobe reenter bugs revealed by a recently added kprobe kunit
test
* tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kprobes: fix current_kprobe never cleared after kprobes reenter
s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
s390/Kconfig: sort config S390 select list again
s390/extmem: return correct segment type in __segment_load()
s390/decompressor: add link map saving
s390/smp: perform cpu reset before delegating work to target cpu
s390/mcck: cleanup user process termination path
s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg
s390/rwonce: add READ_ONCE_ALIGNED_128() macro
s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union
s390/nmi: fix virtual-physical address confusion
s390/setup: do not complain about parameters handled in decompressor
|
|
If a machine check interrupt hits while user process is
running __s390_handle_mcck() helper function is called
directly from the interrupt handler and terminates the
current process by calling make_task_dead() routine.
The make_task_dead() is not allowed to be called from
interrupt context which forces the machine check handler
switch to the kernel stack and enable local interrupts
first.
The __s390_handle_mcck() could also be called to service
pending work, but this time from the external interrupts
handler. It is the machine check handler that establishes
the work and schedules the external interrupt, therefore
the machine check interrupt itself should be disabled
while reading out the corresponding variable:
local_mcck_disable();
mcck = *this_cpu_ptr(&cpu_mcck);
memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck));
local_mcck_enable();
However, local_mcck_disable() does not have effect when
__s390_handle_mcck() is called directly form the machine
check handler, since the machine check interrupt is still
disabled. Therefore, it is not the opening bracket to the
following local_mcck_enable() function.
Simplify the user process termination flow by scheduling
the external interrupt and killing the affected process
from the interrupt context.
Assume a kernel-generated signal is always delivered and
ignore a value returned by do_send_sig_info() funciton.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add an s390 specific READ_ONCE_ALIGNED_128() helper, which can be used for
fast block concurrent (atomic) 128-bit accesses.
The used lpq instruction requires 128-bit alignment. This is also the
reason why the compiler doesn't emit this instruction if __READ_ONCE() is
used for 128-bit accesses.
Link: https://lore.kernel.org/r/20230224100237.3247871-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce a new ap queue status register wrapper union to access register
wide values. So the inline assembler only sees register wide values but the
surrounding code may use a more structured view of the same value and a
reader of the code (and the compiler) gets a clear understanding about the
mapping between fields and register values.
All the changes to access the ap queue status are local to the inline
functions within ap.h. However, the struct ap_qirq_ctrl has been replaces
by a union for same reason and this needed slight adaptions in the calling
code.
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Andreas Arnez <arnez@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Resolve conflicts from the signature change in iommu_map:
- drivers/infiniband/hw/usnic/usnic_uiom.c
Switch iommu_map_atomic() to iommu_map(.., GFP_ATOMIC)
- drivers/vfio/vfio_iommu_type1.c
Following indenting change for GFP_KERNEL
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
'x86/vt-d', 'x86/amd' and 'core' into next
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Two more V!=R patches
* The last part of the cmpxchg patches
* A few fixes
|
|
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
|
|
Use the per-cpu CIF_ENABLED_WAIT flag to decide if an interrupt
occurred while a cpu was idle, instead of checking two conditions
within the old psw.
Also move clearing of the CIF_ENABLED_WAIT bit to the early interrupt
handler, which in turn makes arch_vcpu_is_preempted() also a bit more
precise, since the flag is now cleared before interrupt handlers have
been called.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add test_and_set_cpu_flag() and test_and_clear_cpu_flag() helper functions.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Let cpu helper functions return boolean values. This also allows to
make the code a bit simpler by getting rid of the "!!" construct.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Modify the CPRBX struct to expose a new field ctfm for use with hardware
command filtering within a CEX8 crypto card in CCA coprocessor mode.
The field replaces a reserved byte padding field so that the layout of the
struct and the size does not change.
The new field is used only by user space applications which may use this to
expose the HW filtering facilities in the crypto firmware layers.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The comment for addr_t doesn't make too much sense. Given that also
the formatting is incorrect, just remove it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit bf64f0517e5d ("s390/mem_detect: handle online memory limit
just once") introduced truncation of mem_detect online ranges
based on identity mapping size. For kdump case however the full
set of online memory ranges has to be feed into memblock_physmem_add
so that crashed system memory could be extracted.
Instead of truncating introduce a "usable limit" which is respected by
mem_detect api. Also add extra online memory ranges iterator which still
provides full set of online memory ranges disregarding the "usable limit".
Fixes: bf64f0517e5d ("s390/mem_detect: handle online memory limit just once")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The __uint128_t member was only added for future convenience to the
__vector128 struct. However this is a uapi header file, 31/32 bit (aka
compat layer) is still supported, but doesn't know anything about this
type:
/usr/include/asm/types.h:27:17: error: unknown type name __uint128_t
27 | __uint128_t v;
Therefore remove it again.
Fixes: b0b7b43fcc46 ("s390/vx: add 64 and 128 bit members to __vector128 struct")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
RDP instruction allows to reset DAT-protection bit in a PTE, with less
CPU synchronization overhead than IPTE instruction. In particular, IPTE
can cause machine-wide synchronization overhead, and excessive IPTE usage
can negatively impact machine performance.
RDP can be used instead of IPTE, if the new PTE only differs in SW bits
and _PAGE_PROTECT HW bit, for PTE protection changes from RO to RW.
SW PTE bit changes are allowed, e.g. for dirty and young tracking, but none
of the other HW-defined part of the PTE must change. This is because the
architecture forbids such changes to an active and valid PTE, which
is why invalidation with IPTE is always used first, before writing a new
entry.
The RDP optimization helps mainly for fault-driven SW dirty-bit tracking.
Writable PTEs are initially always mapped with HW _PAGE_PROTECT bit set,
to allow SW dirty-bit accounting on first write protection fault, where
the DAT-protection would then be reset. The reset is now done with RDP
instead of IPTE, if RDP instruction is available.
RDP cannot always guarantee that the DAT-protection reset is propagated
to all CPUs immediately. This means that spurious TLB protection faults
on other CPUs can now occur. For this, common code provides a
flush_tlb_fix_spurious_fault() handler, which will now be used to do a
CPU-local TLB flush. However, this will clear the whole TLB of a CPU, and
not just the affected entry. For more fine-grained flushing, by simply
doing a (local) RDP again, flush_tlb_fix_spurious_fault() would need to
also provide the PTE pointer.
Note that spurious TLB protection faults cannot really be distinguished
from racing pagetable updates, where another thread already installed the
correct PTE. In such a case, the local TLB flush would be unnecessary
overhead, but overall reduction of CPU synchronization overhead by not
using IPTE is still expected to be beneficial.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit 159491f3b509 ("s390/ap: rework assembler functions to use
unions for in/out register variables") the function ap_qact() tries to
grab the status from the wrong part of the register. Thus we always end
up with zeros. Which is wrong, among others, because we detect failures
via status.response_code.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Harald Freudenberger <freude@linux.ibm.com>
Fixes: 159491f3b509 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There function ap_aqic() tries to grab the status from the
wrong part of the register. Thus we always end up with
zeros. Which is wrong, among others, because we detect
failures via status.response_code.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: 159491f3b509 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
