Age | Commit message (Collapse) | Author |
|
[ Upstream commit b3510183ab7d63c71a3f5c89043d31686a76a34c ]
Add missing cast to signed long.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Tested-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/mvmikk0goil.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 969f028bf2c40573ef18061f702ede3ebfe12b42 ]
force_sig_fault() takes a spinlock, which is a sleeping lock with
CONFIG_PREEMPT_RT=y. However, exception handling calls force_sig_fault()
with interrupt disabled, causing a sleeping in atomic context warning.
This can be reproduced using userspace programs such as:
int main() { asm ("ebreak"); }
or
int main() { asm ("unimp"); }
There is no reason that interrupt must be disabled while handling
exceptions from userspace.
Enable interrupt while handling user exceptions. This also has the added
benefit of avoiding unnecessary delays in interrupt handling.
Fixes: f0bddf50586d ("riscv: entry: Convert to generic entry")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250625085630.3649485-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e0eb1b6b0cd29ca7793c501d5960fd36ba11f110 ]
.rodata is implicitly included in the PT_DYNAMIC segment due to
inheriting the segment of the preceding .dynamic section (in both GNU ld
and LLD). When the .rodata section's size is not a multiple of 16
bytes on riscv64, llvm-readelf will report a "PT_DYNAMIC dynamic table
is invalid" warning. Note: in the presence of the .dynamic section, GNU
readelf and llvm-readelf's -d option decodes the dynamic section using
the section.
This issue arose after commit 8f8c1ff879fab60f80f3a7aec3000f47e5b03ba9
("riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr"), which
placed .rodata directly after .dynamic by removing .eh_frame.
This patch resolves the implicit inclusion into PT_DYNAMIC by explicitly
specifying the :text output section phdr.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2093
Signed-off-by: Fangrui Song <i@maskray.me>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250602-riscv-vdso-v1-1-0620cf63cff0@maskray.me
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2b29be967ae456fc09c320d91d52278cf721be1e upstream.
Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk
allocator"), if NUMA is enabled, the page percpu allocator may be used
on very sparse configurations, or when requested on boot with
percpu_alloc=page.
In that case, percpu data gets put in the vmalloc area. However,
sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data,
and simply assumes that __pa() would work. This causes the just started
hart to immediately access an invalid address and hang.
Fortunately, struct sbi_hart_boot_data is not too large, so we can
simply allocate an array for boot_data statically, putting it in the
kernel image.
This fixes NUMA=y SMP boot on Sophgo SG2042.
To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then
run with:
qemu-system-riscv64 -M virt -smp 2 -nographic \
-kernel arch/riscv/boot/Image \
-append "percpu_alloc=page"
Kernel output:
[ 0.000000] Booting Linux on hartid 0
[ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025
...
[ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712
...
[ 0.083192] smp: Bringing up secondary CPUs ...
[ 0.086722] ------------[ cut here ]------------
[ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080)
[ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8
[ 0.088376] Modules linked in:
[ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE
[ 0.088833] Hardware name: riscv-virtio,qemu (DT)
[ 0.088948] epc : __virt_to_phys+0xae/0xe8
[ 0.089001] ra : __virt_to_phys+0xae/0xe8
[ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0
[ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976
[ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0
[ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000
[ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001
[ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec
[ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000
[ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7
[ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8
[ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003
[ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8
[ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8
[ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c
[ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258
[ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c
[ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc
[ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244
[ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90
[ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118
[ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8
[ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4
[ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c
[ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0
[ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18
[ 0.090560] ---[ end trace 0000000000000000 ]---
[ 1.179875] CPU1: failed to come online
[ 1.190324] smp: Brought up 1 node, 1 CPU
Cc: stable@vger.kernel.org
Reported-by: Han Gao <rabenda.cn@gmail.com>
Fixes: 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250624-riscv-hsm-boot-data-array-v1-1-50b5eeafbe61@iscas.ac.cn
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
access handling"
commit 2f73c62d4e13df67380ff6faca39eec2bf08dd93 upstream.
This reverts commit 61a74ad25462 ("riscv: misaligned: fix sleeping function
called during misaligned access handling"). The commit addresses a sleeping
in atomic context problem, but it is not the correct fix as explained by
Clément:
"Using nofault would lead to failure to read from user memory that is paged
out for instance. This is not really acceptable, we should handle user
misaligned access even at an address that would generate a page fault."
This bug has been properly fixed by commit 453805f0a28f ("riscv:
misaligned: enable IRQs while handling misaligned accesses").
Revert this improper fix.
Link: https://lore.kernel.org/linux-riscv/b779beed-e44e-4a5e-9551-4647682b0d21@rivosinc.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 61a74ad25462 ("riscv: misaligned: fix sleeping function called during misaligned access handling")
Link: https://lore.kernel.org/r/20250620110939.1642735-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
handling
[ Upstream commit 61a74ad254628ccd9e88838c3c622885dfb6c588 ]
Use copy_from_user_nofault() and copy_to_user_nofault() instead of
copy_from/to_user functions in the misaligned access trap handlers.
The following bug report was found when executing misaligned memory
accesses:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:162
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 115, name: two
preempt_count: 0, expected: 0
CPU: 0 UID: 0 PID: 115 Comm: two Not tainted 6.14.0-rc5 #24
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff800160ea>] dump_backtrace+0x1c/0x24
[<ffffffff80002304>] show_stack+0x28/0x34
[<ffffffff80010fae>] dump_stack_lvl+0x4a/0x68
[<ffffffff80010fe0>] dump_stack+0x14/0x1c
[<ffffffff8004e44e>] __might_resched+0xfa/0x104
[<ffffffff8004e496>] __might_sleep+0x3e/0x62
[<ffffffff801963c4>] __might_fault+0x1c/0x24
[<ffffffff80425352>] _copy_from_user+0x28/0xaa
[<ffffffff8000296c>] handle_misaligned_store+0x204/0x254
[<ffffffff809eae82>] do_trap_store_misaligned+0x24/0xee
[<ffffffff809f4f1a>] handle_exception+0x146/0x152
Fixes: b686ecdeacf6 ("riscv: misaligned: Restrict user access to kernel memory")
Fixes: 441381506ba7 ("riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code")
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Link: https://lore.kernel.org/r/20250411073850.3699180-3-nylon.chen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a79be02bba5c31f967885c7f3bf3a756d77d11d9 upstream.
This was triggered by one of my mis-uses causing odd build warnings on
sparc in linux-next, but while figuring out why the "obviously correct"
use of cc-option caused such odd breakage, I found eight other cases of
the same thing in the tree.
The root cause is that 'cc-option' doesn't work for checking negative
warning options (ie things like '-Wno-stringop-overflow') because gcc
will silently accept options it doesn't recognize, and so 'cc-option'
ends up thinking they are perfectly fine.
And it all works, until you have a situation where _another_ warning is
emitted. At that point the compiler will go "Hmm, maybe the user
intended to disable this warning but used that wrong option that I
didn't recognize", and generate a warning for the unrecognized negative
option.
Which explains why we have several cases of this in the tree: the
'cc-option' test really doesn't work for this situation, but most of the
time it simply doesn't matter that ity doesn't work.
The reason my recently added case caused problems on sparc was pointed
out by Thomas Weißschuh: the sparc build had a previous explicit warning
that then triggered the new one.
I think the best fix for this would be to make 'cc-option' a bit smarter
about this sitation, possibly by adding an intentional warning to the
test case that then triggers the unrecognized option warning reliably.
But the short-term fix is to replace 'cc-option' with an existing helper
designed for this exact case: 'cc-disable-warning', which picks the
negative warning but uses the positive form for testing the compiler
support.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20250422204718.0b4e3f81@canb.auug.org.au/
Explained-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 453805f0a28fc5091e46145e6560c776f7c7a611 ]
We can safely reenable IRQs if coming from userspace. This allows to
access user memory that could potentially trigger a page fault.
Fixes: b686ecdeacf6 ("riscv: misaligned: Restrict user access to kernel memory")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-3-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd94de9f9e7aac11ec659e386b9db1203d502023 ]
Since both load/store and user/kernel should use almost the same path and
that we are going to add some code around that, factorize it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-2-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Stable-dep-of: 453805f0a28f ("riscv: misaligned: enable IRQs while handling misaligned accesses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb16b3727c05ed36420c90eca1e8f0e279514c1c ]
Add support for the Zcb extension's compressed half-word instructions
(C.LHU, C.LH, and C.SH) in the RISC-V misaligned access trap handler.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250411073850.3699180-2-nylon.chen@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d1d19a11cfbfd8bae1d89cc010b2cc397cd0c48 ]
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up.
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 550c2aa787d1b06efcb11de1877354502a1237f2 ]
[ Quoting Samuel Holland: ]
This is a separate issue, but using ".option rvc" here is a bug.
It will unconditionally enable the C extension for the rest of
the file, even if the kernel is being built with CONFIG_RISCV_ISA_C=n.
[ Quoting Palmer Dabbelt: ]
We're just looking at the address of kgdb_compiled_break, so it's
fine if it ends up as a c.ebreak.
[ Quoting Alexandre Ghiti: ]
.option norvc is used to prevent the assembler from using compressed
instructions, but it's generally used when we need to ensure the
size of the instructions that are used, which is not the case here
as noted by Palmer since we only care about the address. So yes
it will work fine with C enabled :)
So let's just remove them all.
Link: https://lore.kernel.org/all/4b4187c1-77e5-44b7-885f-d6826723dd9a@sifive.com/
Link: https://lore.kernel.org/all/mhng-69513841-5068-441d-be8f-2aeebdc56a08@palmer-ri-x1c9a/
Link: https://lore.kernel.org/all/23693e7f-4fff-40f3-a437-e06d827278a5@ghiti.fr/
Fixes: fe89bd2be866 ("riscv: Add KGDB support")
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/8B431C6A4626225C+20250411073222.56820-2-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3af4bec9c1db3f003be4d5ae09b6a737e4be1612 ]
The arch_kgdb_breakpoint() function defines the kgdb_compiled_break
symbol using inline assembly.
There's a potential issue where the compiler might inline
arch_kgdb_breakpoint(), which would then define the kgdb_compiled_break
symbol multiple times, leading to fail to link vmlinux.o.
This isn't merely a potential compilation problem. The intent here
is to determine the global symbol address of kgdb_compiled_break,
and if this function is inlined multiple times, it would logically
be a grave error.
Link: https://lore.kernel.org/all/4b4187c1-77e5-44b7-885f-d6826723dd9a@sifive.com/
Link: https://lore.kernel.org/all/5b0adf9b-2b22-43fe-ab74-68df94115b9a@ghiti.fr/
Link: https://lore.kernel.org/all/23693e7f-4fff-40f3-a437-e06d827278a5@ghiti.fr/
Fixes: fe89bd2be866 ("riscv: Add KGDB support")
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/F22359AFB6FF9FD8+20250411073222.56820-1-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ee1313f4722e6d67c6e9447ee81d24d6e3ff4ad ]
apply_r_riscv_plt32_rela() may need to emit a PLT entry for the
referenced symbol, so there must be space allocated in the PLT.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250409171526.862481-2-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b4cce68efb93e31a8e51795d696df6e379cb41c ]
The current code allows rel[j] to access one element past the end of the
relocation section. Simplify to num_relocations which is equivalent to
the existing size expression.
Fixes: 080c4324fa5e ("riscv: optimize ELF relocation function in riscv")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409171526.862481-1-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e94eb7ea6f206e229791761a5fdf9389f8dbd183 ]
The /proc/iomem represents the kernel's memory map. Regions marked
with "Reserved" tells the user that the range should not be tampered
with. Kexec-tools, when using the older kexec_load syscall relies on
the "Reserved" regions to build the memory segments, that will be the
target of the new kexec'd kernel.
The RISC-V port tries to expose all reserved regions to userland, but
some regions were not properly exposed: Regions that resided in both
the "regular" and reserved memory block, e.g. the EFI Memory Map. A
missing entry could result in reserved memory being overwritten.
It turns out, that arm64, and loongarch had a similar issue a while
back:
commit d91680e687f4 ("arm64: Fix /proc/iomem for reserved but not memory regions")
commit 50d7ba36b916 ("arm64: export memblock_reserve()d regions via /proc/iomem")
Similar to the other ports, resolve the issue by splitting the regions
in an arch initcall, since we need a working allocator.
Fixes: ffe0e5261268 ("RISC-V: Improve init_resources()")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409182129.634415-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8578b2f7e1fb79d4b92b62fbbe913548bb363654 ]
The number of relocations may be a huge value that is unallocatable
by kmalloc. Use kvmalloc instead so that it does not fail.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Suggested-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Will Pierce <wgpierce17@gmail.com>
Link: https://lore.kernel.org/r/20250402081426.5197-1-wgpierce17@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28093cfef5dd62f4cbd537f2bdf6f0bf85309c45 ]
Commit 58ff537109ac ("riscv: Omit optimized string routines when
using KASAN") introduced calls to EXPORT_SYMBOL() in assembly string
routines, which result in R_RISCV_64 relocations against
.export_symbol section. As these rountines are reused by RISC-V
purgatory and our relocator doesn't recognize these relocations, this
fails kexec-file-load with dmesg like
[ 11.344251] kexec_image: Unknown rela relocation: 2
[ 11.345972] kexec_image: Error loading purgatory ret=-8
Let's support R_RISCV_64 relocation to fix kexec on 64-bit RISC-V.
32-bit variant isn't covered since KEXEC_FILE and KEXEC_PURGATORY isn't
available.
Fixes: 58ff537109ac ("riscv: Omit optimized string routines when using KASAN")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250326051445.55131-2-ziyao@disroot.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c6ec1e1b078d8e2ecd075e46db6197a14930a3fc upstream.
Comparison of bitmaps should be done using bitmap_equal(), not memcmp(),
use the former one to compare isa bitmaps.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Fixes: 625034abd52a8c ("riscv: add ISA extensions validation callback")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250210155615.1545738-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 564fc8eb6f78e01292ff10801f318feae6153fdd upstream.
The init_rt_signal_env() funciton is called before the alternative patch
is applied, so using the alternative-related API to check the availability
of an extension within this function doesn't have the intended effect.
This patch reorders the init_rt_signal_env() and apply_boot_alternatives()
to get the correct signal_minsigstksz.
Fixes: e92f469b0771 ("riscv: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-3-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb8179ce2996bffaa36a04e2b6262843b01b7565 upstream.
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Link: https://lore.kernel.org/r/20241104190314.270095-1-robh@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa49bc2ca8524186ceb0811c23a7f00c3dea6987 upstream.
The signal context of certain RISC-V extensions will be appended after
struct __riscv_extra_ext_header, which already includes an empty context
header. Therefore, there is no need to preserve a separate hdr for the
END of signal context.
Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <AndybnAC@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-2-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9d87cf525fd2e1a5fcbbb40ee3df216d1d266c88 ]
This trips up with Xtheadvector enabled, but as far as I can tell it's
just been an issue since the original patchset.
Fixes: 7ca7a7b9b635 ("riscv: Add sysctl to set the default vector rule for new processes")
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250115180251.31444-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 13134cc949148e1dfa540a0fe5dc73569bc62155 upstream.
p->ainsn.api.insn is a pointer to u32, therefore arithmetic operations are
multiplied by four. This is clearly undesirable for this case.
Cast it to (void *) first before any calculation.
Below is a sample before/after. The dumped memory is two kprobe slots, the
first slot has
- c.addiw a0, 0x1c (0x7125)
- ebreak (0x00100073)
and the second slot has:
- c.addiw a0, -4 (0x7135)
- ebreak (0x00100073)
Before this patch:
(gdb) x/16xh 0xff20000000135000
0xff20000000135000: 0x7125 0x0000 0x0000 0x0000 0x7135 0x0010 0x0000 0x0000
0xff20000000135010: 0x0073 0x0010 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
After this patch:
(gdb) x/16xh 0xff20000000125000
0xff20000000125000: 0x7125 0x0073 0x0010 0x0000 0x7135 0x0073 0x0010 0x0000
0xff20000000125010: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Fixes: b1756750a397 ("riscv: kprobes: Use patch_text_nosync() for insn slots")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241119111056.2554419-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6a97f4118ac07cfdc316433f385dbdc12af5025e upstream.
die() can be called in exception handler, and therefore cannot sleep.
However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled.
That causes the following warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex
preempt_count: 110001, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
dump_backtrace+0x1c/0x24
show_stack+0x2c/0x38
dump_stack_lvl+0x5a/0x72
dump_stack+0x14/0x1c
__might_resched+0x130/0x13a
rt_spin_lock+0x2a/0x5c
die+0x24/0x112
do_trap_insn_illegal+0xa0/0xea
_new_vmalloc_restore_context_a0+0xcc/0xd8
Oops - illegal instruction [#1]
Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT
enabled.
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241118091333.1185288-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5cd900b8b7e42c492431eb4261c18927768db1f9 ]
Local labels should be prefix by '.L' or they'll be exported in the
symbol table. Additionally, this messes up the backtrace by displaying
an incorrect symbol:
...
[ 12.751810] [<ffffffff80441628>] _copy_from_user+0x28/0xc2
[ 12.752035] [<ffffffff800152ca>] handle_misaligned_load+0x1ca/0x2fc
[ 12.752310] [<ffffffff80a033e8>] do_trap_load_misaligned+0x24/0xee
[ 12.752596] [<ffffffff80a0dcae>] _new_vmalloc_restore_context_a0+0xc2/0xce
After:
...
[ 10.243916] [<ffffffff804415e4>] _copy_from_user+0x28/0xc2
[ 10.244026] [<ffffffff800152ca>] handle_misaligned_load+0x1ca/0x2fc
[ 10.244150] [<ffffffff80a033a0>] do_trap_load_misaligned+0x24/0xee
[ 10.244268] [<ffffffff80a0dc66>] handle_exception+0x146/0x152
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 503638e0babf3 ("riscv: Stop emitting preventive sfence.vma for new vmalloc mappings")
Link: https://lore.kernel.org/r/20250103141814.508865-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51356ce60e5915a6bd812873186ed54e45c2699d ]
Prior to commit 5d5fc33ce58e ("riscv: Improve exception and system call
latency"), backtrace through exception worked since ra was filled with
ret_from_exception symbol address and the stacktrace code checked 'pc' to
be equal to that symbol. Now that handle_exception uses regular 'call'
instructions, this isn't working anymore and backtrace stops at
handle_exception(). Since there are multiple call site to C code in the
exception handling path, rather than checking multiple potential return
addresses, add a new symbol at the end of exception handling and check pc
to be in that range.
Fixes: 5d5fc33ce58e ("riscv: Improve exception and system call latency")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241209155714.1239665-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03f0b548537f758830bdb2dc3f2aba713069cef2 ]
relocation_head's list_head member, rel_entry, doesn't need to be
allocated, its storage can just be part of the allocated relocation_head.
Remove the pointer which allows to get rid of the allocation as well as
an existing memory leak found by Kai Zhang using kmemleak.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Reported-by: Kai Zhang <zhangkai@iscas.ac.cn>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241128081636.3620468-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c796e187201242992d6d292bfeff41aadfdf3f29 upstream.
riscv uses fixmap addresses to map the dtb so we can't use __pa() which
is reserved for linear mapping addresses.
Fixes: b2473a359763 ("of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241209074508.53037-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d20a739f17a2de9e269db72330f5655d6545dd4 upstream.
Originally, the check_unaligned_access_emulated_all_cpus function
only checked the boot hart. This fixes the function to check all
harts.
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-1-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c528b5f7927b857b40f3c46afbc869827af3c94 upstream.
The check_unaligned_access_emulated() function should have been called
during CPU hotplug to ensure that if all CPUs had emulated unaligned
accesses, the new CPU also does.
This patch adds the call to check_unaligned_access_emulated() in
the hotplug path.
Fixes: 55e0bf49a0d0 ("RISC-V: Probe misaligned access speed in parallel")
Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241017-jesse_unaligned_vector-v10-2-5b33500160f8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b2473a359763e27567993e7d8f37de82f57a0829 ]
__pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().
Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.
Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This fix is part of a series on for-next, but it fixes broken builds so
I'm picking it up as a fix.
* commit 'bf40167d54d5':
riscv: vdso: Prevent the compiler from inserting calls to memset()
|
|
The macro GET_RM defined twice in this file, one can be removed.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241008094141.549248-3-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The macro is not used in the current version of kernel, it looks like
can be removed to avoid a build warning:
../arch/riscv/kernel/asm-offsets.c: At top level:
../arch/riscv/kernel/asm-offsets.c:7: warning: macro "GENERATING_ASM_OFFSETS" is not used [-Wunused-macros]
7 | #define GENERATING_ASM_OFFSETS
Fixes: 9639a44394b9 ("RISC-V: Provide a cleaner raw_smp_processor_id()")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20241008094141.549248-2-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
'cpu' is an unsigned integer, so its conversion specifier should
be %u, not %d.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2409122309090.40372@angie.orcam.me.uk/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: f1e58583b9c7 ("RISC-V: Support cpu hotplug")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4C127DEECDA287C8+20241017032010.96772-1-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But when ACPI is enabled we go through a
specific branch which returns early and does not call 'of_node_put' for
the node that was acquired.
Since we are not using a CPU device node for the ACPI code anyways, we
can simply move the initialization of it just passed the ACPI block, and
we are guaranteed to have an 'of_node_put' call for the acquired node.
This prevents a bad reference count of the CPU device node.
Moreover, the previous function did not check for errors when acquiring
the device node, so a return -ENOENT has been added for that case.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 604f32ea6909 ("riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240913080053.36636-1-mikisabate@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT informs the firmware that the
EFI binary does not rely on pages that are both executable and
writable.
The flag is used by some distro versions of GRUB to decide if the EFI
binary may be executed.
As the Linux kernel neither has RWX sections nor needs RWX pages for
relocation we should set the flag.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes: cb7d2dd5612a ("RISC-V: Add PE/COFF header for EFI stub")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240929140233.211800-1-heinrich.schuchardt@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Early code designates the code executed when the MMU is not yet enabled,
and this comes with some limitations (see
Documentation/arch/riscv/boot.rst, section "Pre-MMU execution").
FORTIFY_SOURCE must be disabled then since it can trigger kernel panics
as reported in [1].
Reported-by: Jason Montleon <jmontleo@redhat.com>
Closes: https://lore.kernel.org/linux-riscv/CAJD_bPJes4QhmXY5f63GHV9B9HFkSCoaZjk-qCT2NGS7Q9HODg@mail.gmail.com/ [1]
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20241009072749.45006-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When SVPBMT is enabled, __acpi_map_table() will directly access the
data in DDR through the IO attribute, rather than through hardware
cache consistency, resulting in incorrect data in the obtained ACPI
table.
The log: ACPI: [ACPI:0x18] Invalid zero length.
We do not assume whether the bootloader flushes or not. We should
access in a cacheable way instead of maintaining cache consistency
by software.
Fixes: 3b426d4b5b14 ("RISC-V: ACPI : Fix for usage of pointers in different address space")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20241014130141.86426-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The compiler is smart enough to insert a call to memset() in
riscv_vdso_get_cpus(), which generates a dynamic relocation.
So prevent this by using -fno-builtin option.
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20241016083625.136311-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
|
|
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> (arm64 platform)
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240729035958.1957185-1-haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series fixes two areas where uninstrumented assembly routines
caused gaps in KASAN coverage on RISC-V, which were caught by KUnit
tests. The KASAN KUnit test suite passes after applying this series.
This series fixes the following test failures:
# kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1520
KASAN failure expected in "kasan_int_result = strcmp(ptr, "2")", but none occurred
# kasan_strings: EXPECTATION FAILED at mm/kasan/kasan_test.c:1524
KASAN failure expected in "kasan_int_result = strlen(ptr)", but none occurred
not ok 60 kasan_strings
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1531
KASAN failure expected in "set_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1533
KASAN failure expected in "clear_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1535
KASAN failure expected in "clear_bit_unlock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1536
KASAN failure expected in "__clear_bit_unlock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1537
KASAN failure expected in "change_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1543
KASAN failure expected in "test_and_set_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1545
KASAN failure expected in "test_and_set_bit_lock(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1546
KASAN failure expected in "test_and_clear_bit(nr, addr)", but none occurred
# kasan_bitops_generic: EXPECTATION FAILED at mm/kasan/kasan_test.c:1548
KASAN failure expected in "test_and_change_bit(nr, addr)", but none occurred
not ok 61 kasan_bitops_generic
Samuel Holland (2):
riscv: Omit optimized string routines when using KASAN
riscv: Enable bitops instrumentation
arch/riscv/include/asm/bitops.h | 43 ++++++++++++++++++---------------
arch/riscv/include/asm/string.h | 2 ++
arch/riscv/kernel/riscv_ksyms.c | 3 ---
arch/riscv/lib/Makefile | 2 ++
arch/riscv/lib/strcmp.S | 1 +
arch/riscv/lib/strlen.S | 1 +
arch/riscv/lib/strncmp.S | 1 +
arch/riscv/purgatory/Makefile | 2 ++
8 files changed, 32 insertions(+), 23 deletions(-)
* b4-shazam-merge:
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
Link: https://lore.kernel.org/r/20240801033725.28816-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The optimized string routines are implemented in assembly, so they are
not instrumented for use with KASAN. Fall back to the C version of the
routines in order to improve KASAN coverage. This fixes the
kasan_strings() unit test.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240801033725.28816-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
acpi_numa_get_nid() is only called in acpi_numa.c for riscv,
no need to add it in head file, so make it static and remove
related functions in the asm/acpi.h.
Spotted by doing some cleanup for arm64 ACPI.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Link: https://lore.kernel.org/r/20240811031804.3347298-1-guohanjun@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Implement arch_align_stack() to randomize the lower bits
of the stack address.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240625030502.68988-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since this array is only used in this file, it should be static.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407241530.ej5SVgX1-lkp@intel.com/
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240807-make_andes_static-v1-1-b64bf4c3d941@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240904013344.2026738-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Until now, the generic weak kgdb_roundup_cpus() has been used for kgdb on
RISCV. A custom one allows to debug CPUs that are stuck with interrupts
disabled with NMI support in the future. And using an IPI is better than
the generic one since it avoids the potential situation described in the
generic kgdb_call_nmi_hook(). As Andrew pointed out, once there is NMI
support, we can easily extend this and the CPU backtrace support
to use NMIs.
After this patch, the kgdb test show that:
# echo g > /proc/sysrq-trigger
[2]kdb> btc
btc: cpu status: Currently on cpu 2
Available cpus: 0-1(-), 2, 3(-)
Stack traceback for pid 0
0xffffffff81c13a40 0 0 1 0 - 0xffffffff81c14510 swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-g3120273055b6-dirty #51
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006c48>] dump_backtrace+0x28/0x30
[<ffffffff80fceb38>] show_stack+0x38/0x44
[<ffffffff80fe6a04>] dump_stack_lvl+0x58/0x7a
[<ffffffff80fe6a3e>] dump_stack+0x18/0x20
[<ffffffff801143fa>] kgdb_cpu_enter+0x682/0x6b2
[<ffffffff801144ca>] kgdb_nmicallback+0xa0/0xac
[<ffffffff8000a392>] handle_IPI+0x9c/0x120
[<ffffffff800a2baa>] handle_percpu_devid_irq+0xa4/0x1e4
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff800a9e5c>] ipi_mux_process+0xe8/0x110
[<ffffffff806e1e30>] imsic_handle_irq+0xf8/0x13a
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff806dff12>] riscv_intc_aia_irq+0x2e/0x40
[<ffffffff80fe6ab0>] handle_riscv_irq+0x54/0x86
[<ffffffff80ff2e4a>] call_on_irq_stack+0x32/0x40
Rebased on Ryo Takakura's "RISC-V: Enable IPI CPU Backtrace" patch.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240727063438.886155-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|