| Age | Commit message (Collapse) | Author |
|---|
|
Conor reports that risc-v tries to enable IPIs before telling the
core code to enable RCU. With the introduction of the mapple tree
as a backing store for the irq descriptors, this results in
a very shouty boot sequence, as RCU is legitimately upset.
Restore some sanity by moving the risc_ipi_enable() call after
notify_cpu_starting(), which explicitly enables RCU on the calling
CPU.
Fixes: 832f15f42646 ("RISC-V: Treat IPIs as normal Linux IRQs")
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230703-dupe-frying-79ae2ccf94eb@spud
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230703183126.1567625-1-maz@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Here are some bits that were discussed with Drew on the "should we
allow caps" threads that I have now created patches for:
- splitting of riscv_of_processor_hartid() into two distinct functions,
one for use purely during early boot, prior to the establishment of
the possible-cpus mask & another to fit the other current use-cases
- that then allows us to then completely skip some validation of the
hartid in the parser
- the biggest diff in the series is a rework of the comments in the
parser, as I have mostly found the existing (sparse) ones to not be
all that helpful whenever I have to go back and look at it
- from writing the comments, I found a conditional doing a bit of a
dance that I found counter-intuitive, so I've had a go at making that
match what I would expect a little better
- `i` implies 4 other extensions, so add them as extensions and set
them for the craic. Sure why not like...
* b4-shazam-merge:
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
Link: https://lore.kernel.org/r/20230607-audacity-overhaul-82bb867a825f@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Some back and forth with Drew [1] about riscv_fill_hwcap() resulted in
the realisation that it is not very useful to parse the DT & perform
validation of riscv,isa every time we would like to get the id for a
hart.
Although it is no longer called in riscv_fill_hwcap(),
riscv_of_processor_hartid() is called in several other places.
Notably in setup_smp() it forms part of the logic for filling the mask
of possible CPUs. Since a possible CPU must have passed this basic
validation of riscv,isa, a repeat validation is not required.
Rename riscv_of_processor_id() to riscv_early_of_processor_id(),
which will be called from setup_smp() & introduce a new
riscv_of_processor_id() which makes use of the pre-populated mask of
possible cpus.
Link: https://lore.kernel.org/linux-riscv/xvdswl3iyikwvamny7ikrxo2ncuixshtg3f6uucjahpe3xpc5c@ud4cz4fkg5dj/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-glade-pastel-d8cbd9d9f3c6@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Andy Chiu <andy.chiu@sifive.com> says:
This is the v21 patch series for adding Vector extension support in
Linux. Please refer to [1] for the introduction of the patchset. The
v21 patch series was aimed to solve build issues from v19, provide usage
guideline for the prctl interface, and address review comments on v20.
Thank every one who has been reviewing, suggesting on the topic. Hope
this get a step closer to the final merge.
* b4-shazam-merge: (27 commits)
selftests: add .gitignore file for RISC-V hwprobe
selftests: Test RISC-V Vector prctl interface
riscv: Add documentation for Vector
riscv: Enable Vector code to be built
riscv: detect assembler support for .option arch
riscv: Add sysctl to set the default vector rule for new processes
riscv: Add prctl controls for userspace vector management
riscv: hwcap: change ELF_HWCAP to a function
riscv: KVM: Add vector lazy save/restore support
riscv: kvm: Add V extension to KVM ISA
riscv: prevent stack corruption by reserving task_pt_regs(p) early
riscv: signal: validate altstack to reflect Vector
riscv: signal: Report signal frame size to userspace via auxv
riscv: signal: Add sigcontext save/restore for vector
riscv: signal: check fp-reserved words unconditionally
riscv: Add ptrace vector support
riscv: Allocate user's vector context in the first-use trap
riscv: Add task switch support for vector
riscv: Introduce struct/helpers to save/restore per-task Vector state
riscv: Introduce riscv_v_vsize to record size of Vector context
...
Link: https://lore.kernel.org/r/20230605110724.21391-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This patch is used to detect the size of CPU vector registers and use
riscv_v_vsize to save the size of all the vector registers. It assumes all
harts has the same capabilities in a SMP system. If a core detects VLENB
that is different from the boot core, then it warns and turns off V
support for user space.
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-9-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Enable SMP boot on ACPI based platforms by using the RINTC
structures in the MADT table.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-13-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
setup_smp() currently assumes DT-based platforms. To enable ACPI,
first make this a wrapper function and move existing code to
a separate DT-specific function.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-12-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
|
|
This allows userspace to select various routines to use based on the
performance of misaligned access on the target hardware.
Rather than adding DT bindings, this change taps into the alternatives
mechanism used to probe CPU errata. Add a new function pointer alongside
the vendor-specific errata_patch_func() that probes for desirable errata
(otherwise known as "features"). Unlike the errata_patch_func(), this
function is called on each CPU as it comes up, so it can save
feature information per-CPU.
The T-head C906 has fast unaligned access, both as defined by GCC [1],
and in performing a basic benchmark, which determined that byte copies
are >50% slower than a misaligned word copy of the same data size (source
for this test at [2]):
bytecopy size f000 count 50000 offset 0 took 31664899 us
wordcopy size f000 count 50000 offset 0 took 5180919 us
wordcopy size f000 count 50000 offset 1 took 13416949 us
[1] https://github.com/gcc-mirror/gcc/blob/master/gcc/config/riscv/riscv.cc#L353
[2] https://pastebin.com/EPXvDHSW
Co-developed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-5-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.
Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.
We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-4-apatel@ventanamicro.com
|
|
If "capacity-dmips-mhz" is present in a CPU DT node,
topology_parse_cpu_capacity() will fail to allocate memory. arm64, with
which this code path is shared, does not call
topology_parse_cpu_capacity() until later in boot where memory
allocation is available. While "capacity-dmips-mhz" is not yet a valid
property on RISC-V, invalid properties should be ignored rather than
cause issues. Move init_cpu_topology(), which calls
topology_parse_cpu_capacity(), to a later initialization stage, to match
arm64.
As a side effect of this change, RISC-V is "protected" from changes to
core topology code that would work on arm64 where memory allocation is
safe but on RISC-V isn't.
Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Link: https://lore.kernel.org/r/20230105033705.3946130-1-leyfoon.tan@starfivetech.com
[Palmer: use Conor's commit text]
Link: https://lore.kernel.org/linux-riscv/20230104183033.755668-1-pierre.gondois@arm.com/T/#me592d4c8b9508642954839f0077288a353b0b9b2
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.
On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
Core L#0
L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The hartid can be a 64bit value on RV64 platforms.
Add support for 64bit hartid in riscv_of_processor_hartid() and
update its callers.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220527051743.2829940-5-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Move the application of boot alternatives to after the hw-capabilities
are populated. This allows to check for available extensions when
determining which alternatives to apply and also makes it actually
work if CONFIG_SMP is disabled for whatever reason.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220511192921.2223629-8-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Right now the alternatives need to be explicitly enabled and
erratas are limited to SiFive ones.
We want to use alternatives not only for patching soc erratas,
but in the future also for handling different behaviour depending
on the existence of future extensions.
So move the core alternatives over to the kernel subdirectory
and move the CONFIG_RISCV_ALTERNATIVE to be a hidden symbol
which we expect relevant erratas and extensions to just select
if needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, SBI APIs accept a hartmask that is generated from struct
cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it
is not the correct data structure for hartids as it can be higher
than NR_CPUs for platforms with sparse or discontguous hartids.
Remove all association between hartid mask and struct cpumask.
Reviewed-by: Anup Patel <anup@brainfault.org> (For Linux RISC-V changes)
Acked-by: Anup Patel <anup@brainfault.org> (For KVM RISC-V changes)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
As pointed out by commit
de9b8f5dcbd9 ("sched: Fix crash trying to dequeue/enqueue the idle thread")
init_idle() can and will be invoked more than once on the same idle
task. At boot time, it is invoked for the boot CPU thread by
sched_init(). Then smp_init() creates the threads for all the secondary
CPUs and invokes init_idle() on them.
As the hotplug machinery brings the secondaries to life, it will issue
calls to idle_thread_get(), which itself invokes init_idle() yet again.
In this case it's invoked twice more per secondary: at _cpu_up(), and at
bringup_cpu().
Given smp_init() already initializes the idle tasks for all *possible*
CPUs, no further initialization should be required. Now, removing
init_idle() from idle_thread_get() exposes some interesting expectations
with regards to the idle task's preempt_count: the secondary startup always
issues a preempt_disable(), requiring some reset of the preempt count to 0
between hot-unplug and hotplug, which is currently served by
idle_thread_get() -> idle_init().
Given the idle task is supposed to have preemption disabled once and never
see it re-enabled, it seems that what we actually want is to initialize its
preempt_count to PREEMPT_DISABLED and leave it there. Do that, and remove
init_idle() from idle_thread_get().
Secondary startups were patched via coccinelle:
@begone@
@@
-preempt_disable();
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512094636.2958515-1-valentin.schneider@arm.com
|
|
Introduce the "alternative" mechanism from ARM64 and x86 to apply the CPU
vendors' errata solution at runtime. The main purpose of this patch is
to provide a framework. Therefore, the implementation is quite basic for
now so that some scenarios could not use this schemei, such as patching
code to a module, relocating the patching code and heterogeneous CPU
topology.
Users could use the macro ALTERNATIVE to apply an errata to the existing
code flow. In the macro ALTERNATIVE, users need to specify the manufacturer
information(vendorid, archid, and impid) for this errata. Therefore, kernel
will know this errata is suitable for which CPU core. During the booting
procedure, kernel will select the errata required by the CPU core and then
patch it. It means that the kernel only applies the errata to the specified
CPU core. In this case, the vendor's errata does not affect each other at
runtime. The above patching procedure only occurs during the booting phase,
so we only take the overhead of the "alternative" mechanism once.
This "alternative" mechanism is enabled by default to ensure that all
required errata will be applied. However, users can disable this feature by
the Kconfig "CONFIG_RISCV_ERRATA_ALTERNATIVE".
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Use the generic numa implementation to add NUMA support for RISC-V.
This is based on Greentime's patch[1] but modified to use generic NUMA
implementation and few more fixes.
[1] https://lkml.org/lkml/2020/1/10/233
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
counter register for clocksource and CLINT MMIO compare register
for clockevent device.
We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
We add mechanism to set custom IPI operations so that CLINT driver
from drivers directory can provide custom IPI operations.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The following warnings are reported by kbuild with W=1.
>> arch/riscv/kernel/smpboot.c:109:5: warning: no previous prototype for
'start_secondary_cpu' [-Wmissing-prototypes]
109 | int start_secondary_cpu(int cpu, struct task_struct *tidle)
| ^~~~~~~~~~~~~~~~~~~
arch/riscv/kernel/smpboot.c:146:34: warning: no previous prototype for
'smp_callin' [-Wmissing-prototypes]
146 | asmlinkage __visible void __init smp_callin(void)
| ^~~~~~~~~~
Fix the warnings by marking the local functions static and adding the prototype
for the global function.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The trap vector is set only in trap_init which may be too late in some
cases. Early ioremap/efi spits many warning messages which may be useful.
Setup the trap vector early so that any warning/bug can be handled before
generic code invokes trap_init.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The cpu_running is not a lock-class, it lacks the dep_map member in
completion. It causes the error as follow:
arch/riscv/kernel/smpboot.c: In function '__cpu_up':
./include/linux/lockdep.h:364:52: error: 'struct completion' has no member named 'dep_map'
364 | #define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map)
| ^~
./include/asm-generic/bug.h:113:25: note: in definition of macro 'WARN_ON'
113 | int __ret_warn_on = !!(condition); \
| ^~~~~~~~~
./include/linux/lockdep.h:390:27: note: in expansion of macro 'lockdep_is_held'
390 | WARN_ON(debug_locks && !lockdep_is_held(l)); \
| ^~~~~~~~~~~~~~~
arch/riscv/kernel/smpboot.c:118:2: note: in expansion of macro 'lockdep_assert_held'
118 | lockdep_assert_held(&cpu_running);
There are a lot of archs which use cpu_running in smpboot.c (arm,
arm64, openrisc, xtensa, s390, x86, mips), but none of them try
lockdep_assert_held(&cpu_running.wait.lock). So Just remove it.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Store the smp_processor_id() in a local variable to save some
pointer chasing.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, all harts have to jump Linux in RISC-V. This complicates the
multi-stage boot process as every transient stage also has to ensure all
harts enter to that stage and jump to Linux afterwards. It also obstructs
a clean Kexec implementation.
SBI HSM extension provides alternate solutions where only a single hart
need to boot and enter Linux. The booting hart can bring up secondary
harts one by one afterwards.
Add SBI HSM based cpu_ops that implements an ordered booting method in
RISC-V. This change is also backward compatible with older firmware not
implementing HSM extension. If a latest kernel is used with older
firmware, it will continue to use the default spinning booting method.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently, all non-booting harts start booting after the booting hart
updates the per-hart stack pointer. This is done in a way that, it's
difficult to implement any other booting method without breaking the
backward compatibility.
Define a cpu_ops method that allows to introduce other booting methods
in future. Modify the current booting method to be compatible with
cpu_ops.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
RISC-V has the concept of a cpu level interrupt controller. The
interface for it is split between a standardized part that is exposed
as bits in the mstatus/sstatus register and the mie/mip/sie/sip
CRS. But the bit to actually trigger IPIs is not standardized and
just mentioned as implementable using MMIO.
Add support for IPIs using MMIO using the SiFive clint layout (which
is also shared by Ariane, Kendryte and the Qemu virt platform).
Additionally the MMIO block also supports the time value and timer
compare registers, so they are also set up using the same OF node.
Support for other layouts should also be relatively easy to add in the
future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: update include guard format; fix checkpatch
issues; minor commit message cleanup]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Rather than adding prototypes for C functions called only by assembly
code, mark them as __visible. This avoids adding prototypes that will
never be used by the callers. Resolves the following sparse warnings:
arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static?
arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static?
arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static?
arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static?
arch/riscv/kernel/traps.c:100:1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static?
arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static?
arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static?
arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static?
Based on a suggestion from Luc Van Oostenryck.
This version includes changes based on feedback from Christoph Hellwig
<hch@lst.de>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de> # for do_syscall_trace_*
|
|
sparse identifies several missing prototypes caused by missing
preprocessor include directives:
arch/riscv/kernel/cpufeature.c:16:6: warning: symbol 'has_fpu' was not declared. Should it be static?
arch/riscv/kernel/process.c:26:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static?
arch/riscv/kernel/reset.c:15:6: warning: symbol 'pm_power_off' was not declared. Should it be static?
arch/riscv/kernel/syscall_table.c:15:6: warning: symbol 'sys_call_table' was not declared. Should it be static?
arch/riscv/kernel/traps.c:149:13: warning: symbol 'trap_init' was not declared. Should it be static?
arch/riscv/kernel/vdso.c:54:5: warning: symbol 'arch_setup_additional_pages' was not declared. Should it be static?
arch/riscv/kernel/smp.c:64:6: warning: symbol 'arch_match_cpu_phys_id' was not declared. Should it be static?
arch/riscv/kernel/module-sections.c:89:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static?
arch/riscv/mm/context.c:42:6: warning: symbol 'switch_mm' was not declared. Should it be static?
Fix by including the appropriate header files in the appropriate
source files.
This patch should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add prototypes for assembly language functions defined in head.S,
and include these prototypes into C source files that call those
functions.
This patch resolves the following warnings from sparse:
arch/riscv/kernel/setup.c:39:10: warning: symbol 'hart_lottery' was not declared. Should it be static?
arch/riscv/kernel/setup.c:42:13: warning: symbol 'parse_dtb' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:33:6: warning: symbol '__cpu_up_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:34:6: warning: symbol '__cpu_up_task_pointer' was not declared. Should it be static?
arch/riscv/mm/fault.c:25:17: warning: symbol 'do_page_fault' was not declared. Should it be static?
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Currently, there are no topology defined for RISC-V.
Parse the cpu-map node from device tree and setup the
cpu topology.
CPU topology after applying the patch.
$cat /sys/devices/system/cpu/cpu2/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/physical_package_id
0
$cat /sys/devices/system/cpu/cpu3/topology/core_id
3
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If nr_cpus command line option is set, maximum possible cpu should be
set to that value.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
nosmp command line option sets max_cpus to zero. No secondary harts
will boot if this is enabled. But present cpu mask will still point to
all possible masks.
Fix present cpu mask for nosmp usecase.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
We should never have a cpuid greater that NR_CPUS. Compare with NR_CPUS
before creating the mapping between logical and physical CPU ids. This
is also mandatory as NR_CPUS check is removed from
riscv_of_processor_hartid.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
In SMP path, __cpu_up waits for other CPU to come online indefinitely.
This is wrong as other CPU might be disabled in machine mode and
possible CPU is set to the cpus present in DT.
Introduce a completion variable and waits only for a second.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Use the new for_each_of_cpu_node() helper to iterate over cpu nodes
instead of open coding. Note that this will allow matching also on the
node name instead of the (for FDT) deprecated device_type property.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
of_find_node_by_type already calls of_node_put, don't call it again.
Fixes: 94f9bf118f ("RISC-V: Fix of_node_* refcount")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Fix of_node* refcount at various places by using of_node_put.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
commit f1f1007644ff ("mm: add new mmgrab() helper") added a
helper that we missed out on.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The old name was a bit odd.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes. I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This isn't readily apparent from reading the code.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The RISC-V ISA defines a per-hart real-time clock and timer, which is
present on all systems. The clock is accessed via the 'rdtime'
pseudo-instruction (which reads a CSR), and the timer is set via an SBI
call.
Contains various improvements from Atish Patra <atish.patra@wdc.com>.
Signed-off-by: Dmitriy Cherkasov <dmitriy@oss-tech.org>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
[hch: remove dead code, add SPDX tags, used riscv_of_processor_hart(),
minor cleanups, merged hotplug cpu support and other improvements
from Atish]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This contains the various __init C functions, the initial assembly
kernel entry point, and the code to reset the system. When a file was
init-related this patch contains the entire file.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
