| Age | Commit message (Collapse) | Author |
|---|
|
Jisheng Zhang <jszhang@kernel.org> says:
Generally, riscv ISA extensions are fixed for any specific hardware
platform, so a hart's features won't change after booting, this
chacteristic makes it straightforward to use a static branch to check
a specific ISA extension is supported or not to optimize performance.
However, some ISA extensions such as SVPBMT and ZICBOM are handled
via. the alternative sequences.
Basically, for ease of maintenance, we prefer to use static branches
in C code, but recently, Samuel found that the static branch usage in
cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE[1]. As
Samuel pointed out, "Having a static branch in cpu_relax() is
problematic because that function is widely inlined, including in some
quite complex functions like in the VDSO. A quick measurement shows
this static branch is responsible by itself for around 40% of the jump
table."
Samuel's findings pointed out one of a few downsides of static branches
usage in C code to handle ISA extensions detected at boot time:
static branch's metadata in the __jump_table section, which is not
discarded after ISA extensions are finalized, wastes some space.
I want to try to solve the issue for all possible dynamic handling of
ISA extensions at boot time. Inspired by Mark[2], this patch introduces
riscv_has_extension_*() helpers, which work like static branches but
are patched using alternatives, thus the metadata can be freed after
patching.
[1]https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/
[2]https://lore.kernel.org/linux-arm-kernel/20220912162210.3626215-8-mark.rutland@arm.com/
[3]https://lore.kernel.org/linux-riscv/20221130225614.1594256-1-heiko@sntech.de/
* b4-shazam-merge:
riscv: remove riscv_isa_ext_keys[] array and related usage
riscv: KVM: Switch has_svinval() to riscv_has_extension_unlikely()
riscv: cpu_relax: switch to riscv_has_extension_likely()
riscv: alternative: patch alternatives in the vDSO
riscv: switch to relative alternative entries
riscv: module: Add ADD16 and SUB16 rela types
riscv: module: move find_section to module.h
riscv: fpu: switch has_fpu() to riscv_has_extension_likely()
riscv: introduce riscv_has_extension_[un]likely()
riscv: cpufeature: extend riscv_cpufeature_patch_func to all ISA extensions
riscv: hwcap: make ISA extension ids can be used in asm
riscv: cpufeature: detect RISCV_ALTERNATIVES_EARLY_BOOT earlier
riscv: move riscv_noncoherent_supported() out of ZICBOM probe
Link: https://lore.kernel.org/r/20230128172856.3814-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
All users have switched to riscv_has_extension_*, remove unused
definitions, vars and related setting code.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230128172856.3814-14-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Switch cpu_relax() from static branch to the new helper
riscv_has_extension_likely()
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-12-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Make it possible to use alternatives in the vDSO, so that better
implementations can be used if possible.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230128172856.3814-11-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Instead of using absolute addresses for both the old instrucions and
the alternative instructions, use offsets relative to the alt_entry
values. So this not only cuts the size of the alternative entry, but
also meets the prerequisite for patching alternatives in the vDSO,
since absolute alternative entries are subject to dynamic relocation,
which is incompatible with the vDSO building.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-10-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Move find_section() to module.h so that the implementation can be shared
by the alternatives code. This will allow us to use alternatives in
the vdso.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230128172856.3814-8-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Switch has_fpu() from static branch to the new helper
riscv_has_extension_likely().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-7-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Generally, riscv ISA extensions are fixed for any specific hardware
platform, so a hart's features won't change after booting. This
chacteristic makes it straightforward to use a static branch to check
if a specific ISA extension is supported or not to optimize
performance.
However, some ISA extensions such as SVPBMT and ZICBOM are handled
via. the alternative sequences.
Basically, for ease of maintenance, we prefer to use static branches
in C code, but recently, Samuel found that the static branch usage in
cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE[1]. As
Samuel pointed out, "Having a static branch in cpu_relax() is
problematic because that function is widely inlined, including in some
quite complex functions like in the VDSO. A quick measurement shows
this static branch is responsible by itself for around 40% of the jump
table."
Samuel's findings pointed out one of a few downsides of static branches
usage in C code to handle ISA extensions detected at boot time:
static branch's metadata in the __jump_table section, which is not
discarded after ISA extensions are finalized, wastes some space.
I want to try to solve the issue for all possible dynamic handling of
ISA extensions at boot time. Inspired by Mark[2], this patch introduces
riscv_has_extension_*() helpers, which work like static branches but
are patched using alternatives, thus the metadata can be freed after
patching.
Link: https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/ [1]
Link: https://lore.kernel.org/linux-arm-kernel/20220912162210.3626215-8-mark.rutland@arm.com/ [2]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-6-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
riscv_cpufeature_patch_func() currently only scans a limited set of
cpufeatures, explicitly defined with macros. Extend it to probe for all
ISA extensions.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-5-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
So that ISA extensions can be used in assembly files, convert the
multi-letter RISC-V ISA extension IDs enums to macros.
In order to make them visible, move the #ifndef __ASSEMBLY__ guard
to a later point in the header
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This is a single fix, but it conflicts with some recent features. I'm
merging it on top of the commit it fixes to ease backporting.
* b4-shazam-merge:
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
Link: https://lore.kernel.org/r/20220922060958.44203-1-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
commit 8eb060e10185 ("arch/riscv: add Zihintpause support") broke
building with CONFIG_CC_OPTIMIZE_FOR_SIZE enabled (gcc 11.1.0):
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <command-line>:
./arch/riscv/include/asm/jump_label.h: In function 'cpu_relax':
././include/linux/compiler_types.h:285:33: warning: 'asm' operand 0 probably does not match constraints
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:285:33: error: impossible constraint in 'asm'
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:249: arch/riscv/kernel/vdso/vgettimeofday.o] Error 1
make: *** [arch/riscv/Makefile:128: vdso_prepare] Error 2
Having a static branch in cpu_relax() is problematic because that
function is widely inlined, including in some quite complex functions
like in the VDSO. A quick measurement shows this static branch is
responsible by itself for around 40% of the jump table.
Drop the static branch, which ends up being the same number of
instructions anyway. If Zihintpause is supported, we trade the nop from
the static branch for a div. If Zihintpause is unsupported, we trade the
jump from the static branch for (what gets interpreted as) a nop.
Fixes: 8eb060e10185 ("arch/riscv: add Zihintpause support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Heiko Stuebner <heiko@sntech.de> says:
From: Heiko Stuebner <heiko.stuebner@vrull.eu>
This series still tries to allow optimized string functions for specific
extensions. The last approach of using an inline base function to hold
the alternative calls did cause some issues in a number of places
So instead of that we're now just using an alternative j at the beginning
of the generic function to jump to a separate place inside the function
itself.
* b4-shazam-merge:
RISC-V: add zbb support to string functions
RISC-V: add infrastructure to allow different str* implementations
Link: https://lore.kernel.org/r/20230113212301.3534711-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add handling for ZBB extension and add support for using it as a
variant for optimized string functions.
Support for the Zbb-str-variants is limited to the GNU-assembler
for now, as LLVM has not yet acquired the functionality to
selectively change the arch option in assembler code.
This is still under review at
https://reviews.llvm.org/D123515
Co-developed-by: Christoph Muellner <christoph.muellner@vrull.eu>
Signed-off-by: Christoph Muellner <christoph.muellner@vrull.eu>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230113212301.3534711-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Depending on supported extensions on specific RISC-V cores,
optimized str* functions might make sense.
This adds basic infrastructure to allow patching the function calls
via alternatives later on.
The Linux kernel provides standard implementations for string functions
but when architectures want to extend them, they need to provide their
own.
The added generic string functions are done in assembler (taken from
disassembling the main-kernel functions for now) to allow us to control
the used registers and extend them with optimized variants.
This doesn't override the compiler's use of builtin replacements. So still
first of all the compiler will select if a builtin will be better suitable
i.e. for known strings. For all regular cases we will want to later
select possible optimized variants and in the worst case fall back to the
generic implemention added with this change.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230113212301.3534711-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Commit b0f4c74eadbf ("RISC-V: Fix unannoted hardirqs-on in return to
userspace slow-path") renamed the do_notify_resume function to
do_work_pending but did not change the prototype in signal.h
Do that now, as the original function does not exist anymore.
Fixes: b0f4c74eadbf ("RISC-V: Fix unannoted hardirqs-on in return to userspace slow-path")
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230118142252.337103-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Alternatives live in a different section, so offsets used by jal
instruction will point to wrong locations after the patch got applied.
Similar to arm64, adjust the location to consider that offset.
Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230113212205.3534622-1-heiko@sntech.de
Fixes: 27c653c06505 ("RISC-V: fix auipc-jalr addresses in patched alternatives")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
KERN_VIRT_SIZE is 1/4 of the entries of the page global directory,
not half.
Fixes: f7ae02333d13 ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230110080419.931185-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
|
|
This cleans up the ISA string handling to more closely match a version
of the ISA spec. This is visible in /proc/cpuinfo and the ordering
changes may break something in userspace, but these orderings have
changed before without issues so with any luck that's still the case.
This also adds documentation so userspace has a better idea of what is
intended when it comes to compatibility for /proc/cpuinfo, which should
help everyone as this will likely keep changing.
* b4-shazam-merge:
Documentation: riscv: add a section about ISA string ordering in /proc/cpuinfo
RISC-V: resort all extensions in consistent orders
RISC-V: clarify ISA string ordering rules in cpu.c
Link: https://lore.kernel.org/r/20221205144525.2148448-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
On the non-assembler-side wrapping alternative-macros inside other macros
to prevent duplication of code works, as the end result will just be a
string that gets fed to the asm instruction.
In real assembler code, wrapping .macro blocks inside other .macro blocks
brings more restrictions on usage it seems and the optimization done by
commit 2ba8c7dc71c0 ("riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2")
results in a compile error like:
../arch/riscv/lib/strcmp.S: Assembler messages:
../arch/riscv/lib/strcmp.S:15: Error: too many positional arguments
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "886:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "887:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "886:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "887:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "886:"
../arch/riscv/lib/strcmp.S:15: Error: attempt to move .org backwards
Wrapping the variables containing assembler code in quotes solves this issue,
compilation and the code in question still works and objdump also shows sane
decompiled results of the affected code.
Fixes: 2ba8c7dc71c0 ("riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2")
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230105192610.1940841-1-heiko@sntech.de
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Per RISC-V semihosting spec [1], implement semihost.h for the existing
Arm semihosting earlycon driver to work on RISC-V.
Link: https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc [1]
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Tested-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221209150437.795918-3-bmeng@tinylab.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ordering between each and every list of extensions is wildly
inconsistent. Per discussion on the lists pick the following policy:
- The array defining order in /proc/cpuinfo follows a narrow
interpretation of the ISA specifications, described in a comment
immediately presiding it.
- All other lists of extensions are sorted alphabetically.
This will hopefully allow for easier review & future additions, and
reduce conflicts between patchsets as the number of extensions grows.
Link: https://lore.kernel.org/all/20221129144742.2935581-2-conor.dooley@microchip.com/
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221205144525.2148448-3-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.
fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221229170545.718264-1-ben-linux@fluff.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now that KVM setup is handled directly in riscv_kvm_init(), tag functions
and data that are used/set only during init with __init/__ro_after_init.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that
all implementations are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Alternatives live in a different section, so addresses used by call
functions will point to wrong locations after the patch got applied.
Similar to arm64, adjust the location to consider that offset.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-13-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Used together U-type and I-type instructions can for example be used to
generate bigger jumps (i.e. in auipc+jalr pairs) by splitting the value
into an upper immediate (i.e. auipc) and a 12bit immediate (i.e. jalr).
Due to both immediates being considered signed this creates some corner
cases, so add some helper to prevent this from getting duplicated in
different places.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-12-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a macro to allow parsing of the rd register from an instruction.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-11-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Similar to other existing types, allow extracting the immediate
for a U-type instruction.
U-type immediates are special in that regard, that the value
in the instruction in bits [31:12] already represents the same
bits of the immediate, so no shifting is required.
U-type immediates are for example used in the auipc instruction,
so these constants make it easier to parse such instructions.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-10-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The current parse_asm header should become a more centralized place
for everything concerning parsing and constructing instructions.
We already have a header insn-def.h similar to aarch64, so rename
parse_asm.h to insn.h (again similar to aarch64) to show that it's
meant for more than simple instruction parsing.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-8-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Right now the riscv kernel has (at least) two independent sets
of functions to check if an encoded instruction is of a specific
type. One in kgdb and one kprobes simulate-insn code.
More parts of the kernel will probably need this in the future,
so instead of allowing this duplication to go on further,
move macros that do the function declaration in a common header,
similar to at least aarch64.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-7-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Instruction parsing should not be done in individual code, but instead
supported by central
Right now kgdb and kprobes parse instructions and at least kprobes (and
the upcoming auipc+jalr alternative fixer-function) need the auipc
instruction.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-6-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
kprobes need to match ebreak instructions, so add the necessary
data to enable us to centralize that functionality.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-5-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Rather than defining funct3, funct4, etc values pre-shifted to their
target-position in an instruction, define the values themselves and
only shift them where needed.
This allows using these funct-values in other places as well, for example
when decoding functions.
At the same time also reduces the use of magic numbers, one would need
a spec manual to understand.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-4-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Some of the constants and macros already have suitable RV_, RVG_ or
RVC_ prefixes.
Extend this to the rest of the file as well, as we want to use these
things in a broader scope soon.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The opcode definition for c.jalr is
c.jalr c_rs1_n0 1..0=2 15..13=4 12=1 6..2=0
This means funct4 consisting of bit [15:12] is 1001b, so the value is 0x9.
Fixes: edde5584c7ab ("riscv: Add SW single-step support for KDB")
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull RISC-V kvm updates from Paolo Bonzini:
- Allow unloading KVM module
- Allow KVM user-space to set mvendorid, marchid, and mimpid
- Several fixes and cleanups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid
RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU
RISC-V: Export sbi_get_mvendorid() and friends
RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h
RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg()
RISC-V: KVM: Remove redundant includes of asm/csr.h
RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
RISC-V: KVM: Simplify kvm_arch_prepare_memory_region()
RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails
RISC-V: KVM: use vma_lookup() instead of find_vma_intersection()
RISC-V: KVM: Add exit logic to main.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the T-Head PMU via the perf subsystem
- ftrace support for rv32
- Support for non-volatile memory devices
- Various fixes and cleanups
* tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
Documentation: RISC-V: patch-acceptance: s/implementor/implementer
Documentation: RISC-V: Mention the UEFI Standards
Documentation: RISC-V: Allow patches for non-standard behavior
Documentation: RISC-V: Fix a typo in patch-acceptance
riscv: Fixup compile error with !MMU
riscv: Fix P4D_SHIFT definition for 3-level page table mode
riscv: Apply a static assert to riscv_isa_ext_id
RISC-V: Add some comments about the shadow and overflow stacks
RISC-V: Align the shadow stack
RISC-V: Ensure Zicbom has a valid block size
RISC-V: Introduce riscv_isa_extension_check
RISC-V: Improve use of isa2hwcap[]
riscv: Don't duplicate _ALTERNATIVE_CFG* macros
riscv: alternatives: Drop the underscores from the assembly macro names
riscv: alternatives: Don't name unused macro parameters
riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
riscv: mm: call best_map_size many times during linear-mapping
riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
riscv: Fix crash during early errata patching
riscv: boot: add zstd support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
|
|
RISC-V kernels support 3,4,5-level page tables at runtime by folding
upper levels.
In case of a 3-level page table, PGDIR is folded into P4D which in turn
is folded into PUD: PGDIR_SHIFT value is correctly set to the same value
as PUD_SHIFT, but P4D_SHIFT is not, then any use of P4D_SHIFT will access
invalid address bits (all set to 1).
Fix this by dynamically defining P4D_SHIFT value, like we already do for
PGDIR_SHIFT.
Fixes: d10efa21a937 ("riscv: mm: Control p4d's folding by pgtable_l5_enabled")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221201135128.1482189-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a static assert to ensure a RISCV_ISA_EXT_* enum is never
created with a value >= RISCV_ISA_EXT_MAX. We can do this by
putting RISCV_ISA_EXT_ID_MAX to more work. Before it was
redundant with RISCV_ISA_EXT_MAX and hence only used to
document the limit. Now it grows with the enum and is used to
check the limit.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221201113750.18021-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
|
Palmer Dabbelt <palmer@rivosinc.com> says:
This contains a pair of cleanups that depend on a fix that has already
landed upstream.
* b4-shazam-merge:
RISC-V: Add some comments about the shadow and overflow stacks
RISC-V: Align the shadow stack
riscv: fix race when vmap stack overflow
Link: https://lore.kernel.org/r/20221130023515.20217-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Andrew Jones <ajones@ventanamicro.com> says:
This series is a collection of cleanups for alternative-macros.h with
the main motivation being that adding new ALTERNATIVE_3, ALTERNATIVE_4,
... will be possible without lots of bloat.
* b4-shazam-merge:
riscv: Don't duplicate _ALTERNATIVE_CFG* macros
riscv: alternatives: Drop the underscores from the assembly macro names
riscv: alternatives: Don't name unused macro parameters
riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
Link: https://lore.kernel.org/r/20221129150053.50464-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Andrew Jones <ajones@ventanamicro.com> says:
When a DT puts zicbom in the isa string, but does not provide a block
size, ALT_CMO_OP() will attempt to do cache operations on address
zero since the start address will be ANDed with zero. We can't simply
BUG() in riscv_init_cbom_blocksize() when we fail to find a block
size because the failure will happen before logging works, leaving
users to scratch their heads as to why the boot hung. Instead, ensure
Zicbom is disabled and output an error which will hopefully alert
people that the DT needs to be fixed. While at it, add a check that
the block size is a power-of-2 too.
* b4-shazam-merge:
RISC-V: Ensure Zicbom has a valid block size
RISC-V: Introduce riscv_isa_extension_check
RISC-V: Improve use of isa2hwcap[]
Link: https://lore.kernel.org/r/20221129143447.49714-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Reduce clutter by only defining the _ALTERNATIVE_CFG* macros once,
rather than once for assembly and once for C. To do that, we need to
add __ALTERNATIVE_CFG* macros to the assembly side, but those are
one-liners. Also take the opportunity to do a bit of reformatting,
taking full advantage of the fact checkpatch gives us 100 char lines.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-5-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The underscores aren't needed because there isn't anything already
named without them and the _CFG extension. This is a bit of a cleanup
by itself, but the real motivation is for a coming patch which would
otherwise need to add two more underscores to these macro names,
i.e. ____ALTERNATIVE_CFG, and that'd be gross.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-4-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Without CONFIG_RISCV_ALTERNATIVE only the first parameter of the
ALTERNATIVE macros is needed. Use ... for the rest to cut down on
clutter. While there, fix a couple space vs. tab issues.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-3-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
