| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Restructure the function graph shadow stack to prepare it for use
with kretprobes
With the goal of merging the shadow stack logic of function graph and
kretprobes, some more restructuring of the function shadow stack is
required.
Move out function graph specific fields from the fgraph
infrastructure and store it on the new stack variables that can pass
data from the entry callback to the exit callback.
Hopefully, with this change, the merge of kretprobes to use fgraph
shadow stacks will be ready by the next merge window.
- Make shadow stack 4k instead of using PAGE_SIZE.
Some architectures have very large PAGE_SIZE values which make its
use for shadow stacks waste a lot of memory.
- Give shadow stacks its own kmem cache.
When function graph is started, every task on the system gets a
shadow stack. In the future, shadow stacks may not be 4K in size.
Have it have its own kmem cache so that whatever size it becomes will
still be efficient in allocations.
- Initialize profiler graph ops as it will be needed for new updates to
fgraph
- Convert to use guard(mutex) for several ftrace and fgraph functions
- Add more comments and documentation
- Show function return address in function graph tracer
Add an option to show the caller of a function at each entry of the
function graph tracer, similar to what the function tracer does.
- Abstract out ftrace_regs from being used directly like pt_regs
ftrace_regs was created to store a partial pt_regs. It holds only the
registers and stack information to get to the function arguments and
return values. On several archs, it is simply a wrapper around
pt_regs. But some users would access ftrace_regs directly to get the
pt_regs which will not work on all archs. Make ftrace_regs an
abstract structure that requires all access to its fields be through
accessor functions.
- Show how long it takes to do function code modifications
When code modification for function hooks happen, it always had the
time recorded in how long it took to do the conversion. But this
value was never exported. Recently the code was touched due to new
ROX modification handling that caused a large slow down in doing the
modifications and had a significant impact on boot times.
Expose the timings in the dyn_ftrace_total_info file. This file was
created a while ago to show information about memory usage and such
to implement dynamic function tracing. It's also an appropriate file
to store the timings of this modification as well. This will make it
easier to see the impact of changes to code modification on boot up
timings.
- Other clean ups and small fixes
* tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
ftrace: Show timings of how long nop patching took
ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash()
ftrace: Use guard to take the ftrace_lock in release_probe()
ftrace: Use guard to lock ftrace_lock in cache_mod()
ftrace: Use guard for match_records()
fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph()
fgraph: Give ret_stack its own kmem cache
fgraph: Separate size of ret_stack from PAGE_SIZE
ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value
selftests/ftrace: Fix check of return value in fgraph-retval.tc test
ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros
ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs
ftrace: Make ftrace_regs abstract from direct use
fgragh: No need to invoke the function call_filter_check_discard()
fgraph: Simplify return address printing in function graph tracer
function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr()
function_graph: Support recording and printing the function return address
ftrace: Have calltime be saved in the fgraph storage
ftrace: Use a running sleeptime instead of saving on shadow stack
fgraph: Use fgraph data to store subtime for profiler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii
Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian
Hunter)
VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space
(Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg
Nesterov)"
* tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/core: Correct perf sampling with guest VMs
perf/x86: Refactor misc flag assignments
perf/powerpc: Use perf_arch_instruction_pointer()
perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
perf/arm: Drop unused functions
uprobes: Re-order struct uprobe_task to save some space
perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init
perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling
perf/x86/intel/pt: Add support for pause / resume
perf/core: Add aux_pause, aux_resume, aux_start_paused
perf/x86/intel/pt: Fix buffer full but size is 0 case
uprobes: SRCU-protect uretprobe lifetime (with timeout)
uprobes: allow put_uprobe() from non-sleepable softirq context
perf/x86/rapl: Clean up cpumask and hotplug
perf/x86/rapl: Move the pmu allocation out of CPU hotplug
uprobe: Add support for session consumer
uprobe: Add data pointer to consumer handlers
perf/x86/amd: Warn only on new bits set
uprobes: fold xol_take_insn_slot() into xol_get_insn_slot()
uprobes: kill xol_area->slot_count
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
|
Enhance the vpa_pmu driver with a feature to observe context switch
latency event for both per-task (tid) and per-pid (pid) option.
Couple of new helper functions are added to hide the abstraction of
reading the context switch latency counter from kvm_vcpu_arch struct
and these helper functions are defined in the "kvm/book3s_hv.c".
"PERF_ATTACH_TASK" flag is used to decide whether to read the counter
values from lppaca or kvm_vcpu_arch struct.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241118114114.208964-4-kjain@linux.ibm.com
|
|
Commit e1f288d2f9c69 ("KVM: PPC: Book3S HV nestedv2: Add support
for reading VPA counters for pseries guests") introduced support for new
Virtual Process Area(VPA) based software counters. These counters are
useful when observing context switch latency of L1 <-> L2. It also
added access to counters in lppaca, which is good enough to understand
latency details per-cpu level. But to extend and aggregate
per-process level(qemu) or per-pid/tid level(vcpu), these
counters also needs to be added as part of kvm_vcpu_arch struct.
Additional code added to update these new kvm_vcpu_arch variables
in do_trace_nested_cs_time function.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241118114114.208964-3-kjain@linux.ibm.com
|
|
To support performance measurement for KVM on PowerVM(KoP)
feature, PowerVM hypervisor has added couple of new software
counters in Virtual Process Area(VPA) of the partition.
Commit e1f288d2f9c69 ("KVM: PPC: Book3S HV nestedv2: Add
support for reading VPA counters for pseries guests")
have updated the paca fields with corresponding changes.
Proposed perf interface is to expose these new software
counters for monitoring of context switch latencies and
runtime aggregate. Perf interface driver is called
"vpa_pmu" and it has dependency on KVM and perf, hence
added new config called "VPA_PMU" which depends on
"CONFIG_KVM_BOOK3S_64_HV" and "CONFIG_HV_PERF_CTRS".
Since, kvm and kvm_host are currently compiled as built-in
modules, this perf interface takes the same path and
registered as a module.
vpa_pmu perf interface needs access to some of the kvm
functions and structures like kvmhv_get_l2_counters_status(),
hence kvm_book3s_64.h and kvm_ppc.h are included.
Below are the events added to monitor KoP:
vpa_pmu/l1_to_l2_lat/
vpa_pmu/l2_to_l1_lat/
vpa_pmu/l2_runtime_agg/
and vpa_pmu driver supports only per-cpu monitoring with this patch.
Example usage:
[command]# perf stat -e vpa_pmu/l1_to_l2_lat/ -a -I 1000
1.001017682 727,200 vpa_pmu/l1_to_l2_lat/
2.003540491 1,118,824 vpa_pmu/l1_to_l2_lat/
3.005699458 1,919,726 vpa_pmu/l1_to_l2_lat/
4.007827011 2,364,630 vpa_pmu/l1_to_l2_lat/
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241118114114.208964-1-kjain@linux.ibm.com
|
|
Pull xattr updates from Al Viro:
"Sanitize xattr and io_uring interactions with it, add *xattrat()
syscalls, sanitize struct filename handling in there"
* tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr: remove redundant check on variable err
fs/xattr: add *at family syscalls
new helpers: file_removexattr(), filename_removexattr()
new helpers: file_listxattr(), filename_listxattr()
replace do_getxattr() with saner helpers.
replace do_setxattr() with saner helpers.
new helper: import_xattr_name()
fs: rename struct xattr_ctx to kernel_xattr_ctx
xattr: switch to CLASS(fd)
io_[gs]etxattr_prep(): just use getname()
io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE
getname_maybe_null() - the third variant of pathname copy-in
teach filename_lookup() to treat NULL filename as ""
|
|
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ocfs2: uncache inode which has failed entering the group
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
mm, doc: update read_ahead_kb for MADV_HUGEPAGE
fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args()
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
mm/mremap: fix address wraparound in move_page_tables()
tools/mm: fix compile error
mm, swap: fix allocation and scanning race with swapoff
|
|
A hwcap feature bit is passed to cpu_has_feature, resulting in testing
for CPU_FTR_MMCRA instead of the 3.1 platform revision.
Fixes: c954b252dee9 ("crypto: powerpc/p10-aes-gcm - Register modules as SIMD")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes: 75bc255a7444 ("crash: clean up kdump related config items")
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Reported-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Closes: https://lists.debian.org/debian-powerpc/2024/07/msg00001.html
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unlike all other arches, powerpc doesn't allow the user to override CPP,
because it sets it unconditionally in the arch Makefile. This can lead
to strange build failures.
Instead add the required flags to KBUILD_CPPFLAGS, which are passed
to CPP, CC and AS invocations by the generic Makefile logic.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240607061629.530301-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[mpe: Rebase, write change log, add Arnd's SoB as communicated privately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241107112646.32401-1-mpe@ellerman.id.au
|
|
The use of the __free macro allows the cleanup to be based on scope
instead of on another function called later. This makes the cleanup
automatic and less susceptible to errors later.
Signed-off-by: David Hunter <david.hunter.linux@gmail.com>
[mpe: Fix over-long line & change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240709143553.117053-1-david.hunter.linux@gmail.com
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_property_read_u64() can fail and leave the variable uninitialized,
which will then be used. Return error if reading the property failed.
Fixes: 2e6bd221d96f ("powerpc/kexec_file: Enable early kernel OPAL calls")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240930075628.125138-1-zhangzekun11@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.13
1. Add iocsr and mmio bus simulation in kernel.
2. Add in-kernel interrupt controller emulation.
3. Add virt extension support for eiointc irqchip.
|
|
Replace an of_get_property() call by of_property_match_string()
so that this function implementation can be simplified.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/linuxppc-dev/d9bdc1b6-ea7e-47aa-80aa-02ae649abf72@csgroup.eu/
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linuxppc-dev/87cyk97ufp.fsf@mail.lhotse/
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/ede25e03-7a14-4787-ae1b-4fc9290add5a@web.de
|
|
Commit 384e338a9187 ("powerpc: drop MPC8540_ADS and MPC8560_ADS platform
support") and commit b751ed04bc5e ("powerpc: drop MPC85xx_CDS platform
support") removes the platform support for MPC8540_ADS, MPC8560_ADS and
MPC85xx_CDS in the source tree, but misses to remove the config options in
the Kconfig file. Hence, these three config options are without any effect
since then.
Drop these three dead config options.
Fixes: 384e338a9187 ("powerpc: drop MPC8540_ADS and MPC8560_ADS platform support")
Fixes: b751ed04bc5e ("powerpc: drop MPC85xx_CDS platform support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240927095203.392365-1-lukas.bulwahn@redhat.com
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids`
with the more readable `!cpumask_intersects(a, b)`.
Comparison between cpumask_any_and() and cpumask_intersects()
The cpumask_any_and() function expands using FIND_FIRST_BIT(),
resulting in a loop that iterates through each bit of the bitmask:
for (idx = 0; idx * BITS_PER_LONG < sz; idx++) {
val = (FETCH);
if (val) {
sz = min(idx * BITS_PER_LONG + __ffs(MUNGE(val)), sz);
break;
}
}
The cpumask_intersects() function expands using __bitmap_intersects(),
resulting in that the first loop iterates through each long word of the bitmask,
and the second through each bit within a long word:
unsigned int k, lim = bits/BITS_PER_LONG;
for (k = 0; k < lim; ++k)
if (bitmap1[k] & bitmap2[k])
return true;
if (bits % BITS_PER_LONG)
if ((bitmap1[k] & bitmap2[k]) & BITMAP_LAST_WORD_MASK(bits))
return true;
Conclusion: cpumask_intersects() is at least as efficient as cpumask_any_and(),
if not more so, as it typically performs fewer loops and comparisons.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240926092623.399577-2-costa.shul@redhat.com
|
|
Currently this cannot lookup symbol beyond 64 characters in some cases
like "ls", "lp" and "t"
Fix this by using KSYM_NAME_LEN instead of fixed 64 characters
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241024191232.1570894-2-mchauras@linux.ibm.com
|
|
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc0e ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
arch/powerpc/platforms/82xx/ep8248e.c: In function 'ep8248e_mdio_probe':
arch/powerpc/platforms/82xx/ep8248e.c:131:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
131 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241014-ep8248e-pa-fmt-v1-1-009ea0dcc18f@kernel.org
|
|
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240930112121.95324-12-Julia.Lawall@inria.fr
|
|
Fix typo in the following kvm function names from:
kmvhv_counters_tracepoint_regfunc -> kvmhv_counters_tracepoint_regfunc
kmvhv_counters_tracepoint_unregfunc -> kvmhv_counters_tracepoint_unregfunc
Fixes: e1f288d2f9c6 ("KVM: PPC: Book3S HV nestedv2: Add support for reading VPA counters for pseries guests")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241114085020.1147912-1-kjain@linux.ibm.com
|
|
Make sure PowerPC uses the arch-specific function now that those have
been reorganized.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-4-coltonlewis@google.com
|
|
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
|
|
These functions are not used outside of sstep.c
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241001130356.14664-1-msuchanek@suse.de
|
|
Commit 6398326b9ba1 ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
dropped the use of vcore->dpdes for msgsndp / SMT emulation. Prior to that
commit, the below code at L1 level (see [1] for terminology) was
responsible for setting vc->dpdes for the respective L2 vCPU:
if (!nested) {
kvmppc_core_prepare_to_enter(vcpu);
if (vcpu->arch.doorbell_request) {
vc->dpdes = 1;
smp_wmb();
vcpu->arch.doorbell_request = 0;
}
L1 then sent vc->dpdes to L0 via kvmhv_save_hv_regs(), and while
servicing H_ENTER_NESTED at L0, the below condition at L0 level made sure
to abort and go back to L1 if vcpu->arch.doorbell_request = 1 so that L1
sets vc->dpdes as per above if condition:
} else if (vcpu->arch.pending_exceptions ||
vcpu->arch.doorbell_request ||
xive_interrupt_pending(vcpu)) {
vcpu->arch.ret = RESUME_HOST;
goto out;
}
This worked fine since vcpu->arch.doorbell_request was used more like a
flag and vc->dpdes was used to pass around the doorbell state. But after
Commit 6398326b9ba1 ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes"),
vcpu->arch.doorbell_request is the only variable used to pass around
doorbell state.
With the plumbing for handling doorbells for nested guests updated to use
vcpu->arch.doorbell_request over vc->dpdes, the above "else if" stops
doorbells from working correctly as L0 aborts execution of L2 and
instead goes back to L1.
Remove vcpu->arch.doorbell_request from the above "else if" condition as
it is no longer needed for L0 to correctly handle the doorbell status
while running L2.
[1] Terminology
1. L0 : PowerNV linux running with HV privileges
2. L1 : Pseries KVM guest running on top of L0
2. L2 : Nested KVM guest running on top of L1
Fixes: 6398326b9ba1 ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241109063301.105289-4-gautam@linux.ibm.com
|
|
commit 6398326b9ba1 ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
introduced an optimization to use only vcpu->doorbell_request for SMT
emulation for Power9 and above guests, but the code for nested guests
still relies on the old way of handling doorbells, due to which an L2
guest (see [1]) cannot be booted with XICS with SMT>1. The command to
repro this issue is:
// To be run in L1
qemu-system-ppc64 \
-drive file=rhel.qcow2,format=qcow2 \
-m 20G \
-smp 8,cores=1,threads=8 \
-cpu host \
-nographic \
-machine pseries,ic-mode=xics -accel kvm
Fix the plumbing to utilize vcpu->doorbell_request instead of vcore->dpdes
for nested KVM guests on P9 and above.
[1] Terminology
1. L0 : PowerNV linux running with HV privileges
2. L1 : Pseries KVM guest running on top of L0
2. L2 : Nested KVM guest running on top of L1
Fixes: 6398326b9ba1 ("KVM: PPC: Book3S HV P9: Stop using vc->dpdes")
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241109063301.105289-3-gautam@linux.ibm.com
|
|
This reverts commit 7c3ded5735141ff4d049747c9f76672a8b737c49.
On PowerNV, when a nested guest tries to use a feature prohibited by
HFSCR, the nested hypervisor (L1) should get a H_FAC_UNAVAILABLE trap
so that L1 can emulate the feature. But with the change introduced by
commit 7c3ded573514 ("KVM: PPC: Book3S HV Nested: Stop forwarding all HFUs
to L1") the L1 ends up getting a H_EMUL_ASSIST because of which, the L1
ends up injecting a SIGILL when L2 (nested guest) tries to use doorbells.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241109063301.105289-2-gautam@linux.ibm.com
|
|
These offsets are not used anymore, delete them.
Fixes: c39b1dcf055d ("powerpc/vdso: Add a page for non-time data")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241113-vdso-powerpc-asm-offsets-v1-1-3f7e589f090d@linutronix.de
|
|
- Drop obsolete references to PPC970 KVM, which was removed 10 years ago.
- Fix incorrect references to non-existing ioctls
- List registers supported by KVM_GET/SET_ONE_REG on s390
- Use rST internal links
- Reorganize the introduction to the API document
|
|
spu_priv1_beat_ops were removed in commit bf4981a00636 ("powerpc: Remove
the celleb support"), remove the unneeded extern.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241112114805.453894-1-mpe@ellerman.id.au
|
|
Remove the use of contractions and use proper punctuation in #error
directive messages that discourage the direct inclusion of header files.
Link: https://lkml.kernel.org/r/20241105032231.28833-1-natanielfarzan@gmail.com
Signed-off-by: Nataniel Farzan <natanielfarzan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
... if they are identical to fallbacks, just leave them alone.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which is less efficient
than seq_put_decimal_ull_width(), stress reading /proc/interrupts
indicates ~30% performance improvement with this patch.
Signed-off-by: David Wang <00107082@163.com>
[mpe: Flesh out change log based on original submission]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/all/20241103080552.4787-1-00107082@163.com
Link: https://patch.msgid.link/20241108162327.9887-1-00107082@163.com
|
|
As per the kernel documentation[1], hardlockup detector should
be disabled in KVM guests as it may give false positives. On
PPC, hardlockup detector is enabled inside KVM guests because
disable_hardlockup_detector() is marked as early_initcall and it
relies on kvm_guest static key (is_kvm_guest()) which is initialized
later during boot by check_kvm_guest(), which is a core_initcall.
check_kvm_guest() is also called in pSeries_smp_probe(), which is called
before initcalls, but it is skipped if KVM guest does not have doorbell
support or if the guest is launched with SMT=1.
Call check_kvm_guest() in disable_hardlockup_detector() so that
is_kvm_guest() check goes through fine and hardlockup detector can be
disabled inside the KVM guest.
[1]: Documentation/admin-guide/sysctl/kernel.rst
Fixes: 633c8e9800f3 ("powerpc/pseries: Enable hardlockup watchdog for PowerVM partitions")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241108094839.33084-1-gautam@linux.ibm.com
|
|
The param area is a memory region where the kernel places additional
command-line arguments for fadump kernel. Currently, the param memory
area is reserved in fadump kernel if it is above boot_mem_top. However,
it should be reserved if it is below boot_mem_top because the fadump
kernel already reserves memory from boot_mem_top to the end of DRAM.
Currently, there is no impact from not reserving param memory if it is
below boot_mem_top, as it is not used after the early boot phase of the
fadump kernel. However, if this changes in the future, it could lead to
issues in the fadump kernel.
Fixes: 3416c9daa6b1 ("powerpc/fadump: pass additional parameters when fadump is active")
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241107055817.489795-2-sourabhjain@linux.ibm.com
|
|
Memory for passing additional parameters to fadump capture kernel
is allocated during subsys_initcall level, using memblock. But
as slab is already available by this time, allocation happens via
the buddy allocator. This may work for radix MMU but is likely to
fail in most cases for hash MMU as hash MMU needs this memory in
the first memory block for it to be accessible in real mode in the
capture kernel (second boot). So, allocate memory for additional
parameters area as soon as MMU mode is obvious.
Fixes: 683eab94da75 ("powerpc/fadump: setup additional parameters for dump capture kernel")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/lkml/a70e4064-a040-447b-8556-1fd02f19383d@linux.vnet.ibm.com/T/#u
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241107055817.489795-1-sourabhjain@linux.ibm.com
|
|
Booting a KASAN=y kernel with the recently added ftrace out-of-line
support causes a warning at boot:
------------[ cut here ]------------
Stub index overflow (1729 > 1728)
WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/trace/ftrace.c:209 ftrace_init_nop+0x408/0x444
...
NIP ftrace_init_nop+0x408/0x444
LR ftrace_init_nop+0x404/0x444
Call Trace:
ftrace_init_nop+0x404/0x444 (unreliable)
ftrace_process_locs+0x544/0x8a0
ftrace_init+0xb4/0x22c
start_kernel+0x1dc/0x4d4
start_here_common+0x1c/0x20
...
ftrace failed to modify
[<c0000000030beddc>] _sub_I_65535_1+0x8/0x3c
actual: 00:00:00:60
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c00000000008b418
------------[ cut here ]------------
The function in question, _sub_I_65535_1 is some sort of trampoline
generated for KASAN, and is in the .text.startup section. That section
is part of INIT_TEXT, meaning is_kernel_inittext() returns true for it.
But the script that determines how many out-of-line ftrace stubs are
needed isn't doesn't consider .text.startup as inittext, leading to
there not being enough space for the init stubs.
Conversely the logic to calculate how many stubs are needed for the text
section isn't filtering out the symbols in .text.startup and so ends up
over counting.
Fix both problems by calculating the total number of stubs first, then
the number that count as inittext, and then subtract the latter from the
former to get the count for the text section.
Fixes: eec37961a56a ("powerpc64/ftrace: Move ftrace sequence out of line")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241107111630.31068-1-mpe@ellerman.id.au
|
|
KVM/riscv changes for 6.13
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
|
|
This was only needed for PPC970 support, which is long gone: the
implementation was removed in 2014.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241023124507.280382-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Simplify the cell_iommu_get_fixed_address() dma-ranges parsing to use
the for_each_of_range() iterator.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106212647.341857-1-robh@kernel.org
|
|
Simplify the ppc44x PCI dma-ranges parsing to use the
for_each_of_range() iterator.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106212640.341677-1-robh@kernel.org
|
|
Several architectures support text patching, but they name the header
files that declare patching functions differently.
Make all such headers consistently named text-patching.h and add an empty
header in asm-generic for architectures that do not support text patching.
Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
