| Age | Commit message (Collapse) | Author |
|---|
|
tcrypt is actually a benchmarking module and not the actual tests. This
regularly causes confusion. Update the kconfig option name and help
text accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add explicit array bounds to the function prototypes for the parameters
that didn't already get handled by the conversion to use chacha_state:
- chacha_block_*():
Change 'u8 *out' or 'u8 *stream' to u8 out[CHACHA_BLOCK_SIZE].
- hchacha_block_*():
Change 'u32 *out' or 'u32 *stream' to u32 out[HCHACHA_OUT_WORDS].
- chacha_init():
Change 'const u32 *key' to 'const u32 key[CHACHA_KEY_WORDS]'.
Change 'const u8 *iv' to 'const u8 iv[CHACHA_IV_SIZE]'.
No functional changes. This just makes it clear when fixed-size arrays
are expected.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
htmdump_init calls is_kvm_guest() to check for guest environment.
is_kvm_guest() is defined in kvm_guest.h header file. Without including
the header file, build hits error failing to find the function.
arch/powerpc/platforms/pseries/htmdump.c: In function 'htmdump_init':
arch/powerpc/platforms/pseries/htmdump.c:469:6: error: implicit declaration of function 'is_kvm_guest';
did you mean '__key_get'? [-Werror=implicit-function-declaration]
if (is_kvm_guest()) {
^~~~~~~~~~~~
__key_get
This is observed in configs where CONFIG_KVM_GUEST is disabled.
Include header file explicitly to avoid the build error
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061324.elUl4njU-lkp@intel.com/
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250506135232.69014-1-atrajeev@linux.ibm.com
|
|
The commit 9576730d0e6e ("KVM: PPC: select IRQ_BYPASS_MANAGER") enabled
IRQ_BYPASS_MANAGER when CONFIG_KVM was set. Subsequently, commit
c57875f5f9be ("KVM: PPC: Book3S HV: Enable IRQ bypass") enabled IRQ
bypass and added the necessary callbacks to create/remove the mappings
between host real IRQ and the guest GSI.
The availability of IRQ bypass is determined by the arch-specific
function kvm_arch_has_irq_bypass(), which invokes
kvmppc_irq_bypass_add_producer_hv(). This function, in turn, calls
kvmppc_set_passthru_irq_hv() to create a mapping in the passthrough IRQ
map, associating a host IRQ to a guest GSI.
However, when a pSeries KVM guest (L2) is booted within an LPAR (L1)
with the kernel boot parameter `xive=off`, it defaults to using emulated
XICS controller. As an attempt to establish host IRQ to guest GSI
mappings via kvmppc_set_passthru_irq() on a PCI device hotplug
(passhthrough) operation fail, returning -ENOENT. This failure occurs
because only interrupts with EOI operations handled through OPAL calls
(verified via is_pnv_opal_msi()) are currently supported.
These mapping failures lead to below repeated warnings in the L1 host:
[ 509.220349] kvmppc_set_passthru_irq_hv: Could not assign IRQ map for (58,4970)
[ 509.220368] kvmppc_set_passthru_irq (irq 58, gsi 4970) fails: -2
[ 509.220376] vfio-pci 0015:01:00.0: irq bypass producer (token 0000000090bc635b) registration fails: -2
...
[ 509.291781] vfio-pci 0015:01:00.0: irq bypass producer (token 000000003822eed8) registration fails: -2
Fix this by restricting IRQ bypass enablement on pSeries systems by
making the IRQ bypass callbacks unavailable when running on pSeries
platform.
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250425185641.1611857-1-amachhiw@linux.ibm.com
|
|
8xx has three large page sizes: 8M, 512k and 16k.
A too big alignment can lead to wasting memory. On a board which has
only 32 MBytes of RAM, every single byte is worth it and a 512k
alignment is sometimes too much.
Allow mapping kernel memory with 16k pages and reduce the constraint
on kernel memory alignment. 512k and 16k pages are handled the same
way so reverse tests in order to make 8M pages the special case and
other ones (512k and 16k) the alternative.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/fa9927b70df13627cdf10b992ea71d6562c7760e.1746191262.git.christophe.leroy@csgroup.eu
|
|
The generic implementation of pte_{alloc_one,free}_kernel now calls the
[cd]tor, without initialising the ptlock needlessly as
pagetable_pte_ctor() skips it for init_mm.
On powerpc, all functions related to PTE allocation are implemented by
common helpers, which are passed a boolean to differentiate user from
kernel pgtables. This patch aligns the powerpc implementation with the
generic one by calling pagetable_pte_[cd]tor() unconditionally in those
helpers.
Link: https://lkml.kernel.org/r/20250408095222.860601-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit 61444cde9170 ("ARM:
8591/1: mm: use fully constructed struct pages for EFI pgd allocations"),
they also are for special page tables like efi_mm. The one case where
split locks are definitely unused is pgtables owned by init_mm; this is
consistent with the behaviour of apply_to_pte_range().
The approach chosen in this series is therefore to pass the mm associated
to the pgtables being constructed to pagetable_{pte,pmd}_ctor() (patch 1),
and skip ptlock_init() if mm == &init_mm (patch 3 and 7). This makes it
possible to call the PTE ctor/dtor from pte_{alloc,free}_kernel() without
unintended consequences (patch 3). As a result the accounting functions
are now called at all levels for kernel pgtables, and split locks are
never initialised.
In configurations where ptlocks are dynamically allocated (32-bit,
PREEMPT_RT, etc.) and ARCH_ENABLE_SPLIT_PMD_PTLOCK is selected, this
series results in the removal of a kmem_cache allocation for every kernel
PMD. Additionally, for certain architectures that do not use
<asm-generic/pgalloc.h> such as s390, the same optimisation occurs at the
PTE level.
===
Things get more complicated when it comes to special pgtable allocators
(patch 8-12). All architectures need such allocators to create initial
kernel pgtables; we are not concerned with those as the ctor cannot be
called so early in the boot sequence. However, those allocators may also
be used later in the boot sequence or during normal operations. There are
two main use-cases:
1. Mapping EFI memory: efi_mm (arm, arm64, riscv)
2. arch_add_memory(): init_mm
The ctor is already explicitly run (at the PTE/PMD level) in the first
case, as required for pgtables that are not associated with init_mm.
However the same allocators may also be used for the second use-case (or
others), and this is where it gets messy. Patch 1 calls the ctor with
NULL as mm in those situations, as the actual mm isn't available.
Practically this means that ptlocks will be unconditionally initialised.
This is fine on arm - create_mapping_late() is only used for the EFI
mapping. On arm64, __create_pgd_mapping() is also used by
arch_add_memory(); patch 8/9/11 ensure that ctors are called at all levels
with the appropriate mm. The situation is similar on riscv, but
propagating the mm down to the ctor would require significant refactoring.
Since they are already called unconditionally, this series leaves riscv
no worse off - patch 10 adds comments to clarify the situation.
From a cursory look at other architectures implementing arch_add_memory(),
s390 and x86 may also need a similar treatment to add constructor calls.
This is to be taken care of in a future version or as a follow-up.
===
The complications in those special pgtable allocators beg the question:
does it really make sense to treat efi_mm and init_mm differently in e.g.
apply_to_pte_range()? Maybe what we really need is a way to tell if an mm
corresponds to user memory or not, and never use split locks for non-user
mm's. Feedback and suggestions welcome!
This patch (of 12):
In preparation for calling constructors for all kernel page tables while
eliding unnecessary ptlock initialisation, let's pass down the associated
mm to the PTE/PMD level ctors. (These are the two levels where ptlocks
are used.)
In most cases the mm is already around at the point of calling the ctor so
we simply pass it down. This is however not the case for special page
table allocators:
* arch/arm/mm/mmu.c
* arch/arm64/mm/mmu.c
* arch/riscv/mm/init.c
In those cases, the page tables being allocated are either for standard
kernel memory (init_mm) or special page directories, which may not be
associated to any mm. For now let's pass NULL as mm; this will be refined
where possible in future patches.
No functional change in this patch.
Link: https://lore.kernel.org/linux-mm/20250103184415.2744423-1-kevin.brodsky@arm.com/ [1]
Link: https://lore.kernel.org/linux-hardening/20250203101839.1223008-1-kevin.brodsky@arm.com/ [2]
Link: https://lkml.kernel.org/r/20250408095222.860601-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20250408095222.860601-2-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: <x86@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ptdump: Drop assumption that pxd_val() is u64", v2.
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM. A similar problem exists for effective_prot(),
although it is restricted to x86 platform.
This series splits note_page() and effective_prot() into individual page
table level specific callbacks which accepts corresponding pxd_t page
table entry as an argument instead and later on all subscribing platforms
could derive pxd_val() from the table entries as required and proceed as
before.
Define ptdesc_t type which describes the basic page table descriptor
layout on arm64 platform. Subsequently all level specific pxxval_t
descriptors are derived from ptdesc_t thus establishing a common original
format, which can also be appropriate for page table entries, masks and
protection values etc which are used at all page table levels.
This patch (of 3):
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM.
Split note_page() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then subscribing
platforms just derive pxd_val() from the entries as required and proceed
as earlier.
Also add a note_page_flush() callback for flushing the last page table
page that was being handled earlier via level = -1.
Link: https://lkml.kernel.org/r/20250407053113.746295-1-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/20250407053113.746295-2-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to syscall_set_arguments() that complements
syscall_get_arguments(), introduce syscall_set_nr() that complements
syscall_get_nr().
syscall_set_nr() is going to be needed along with syscall_set_arguments()
on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit 7962c2eddbfe ("arch: remove unused function
syscall_set_arguments()") by reusing some of old syscall_set_arguments()
implementations.
[nathan@kernel.org: fix compile time fortify checks]
Link: https://lkml.kernel.org/r/20250408213131.GA2872426@ax162
Link: https://lkml.kernel.org/r/20250303112009.GC24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> [mips]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures simply call pfn_pte(). Centralise that as the normal
definition and remove the definition of mk_pte() from the architectures
which have either that exact definition or something similar.
Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add poly1305_emit_arch with fallback instead of calling assembly
directly. This is because the state format differs between p10
and that of the generic implementation.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 14d31979145d ("crypto: powerpc/poly1305 - Add block-only interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the architecture-optimized CRC code do its CPU feature checks in
subsys_initcalls instead of arch_initcalls. This makes it consistent
with arch/*/lib/crypto/ and ensures that it runs after initcalls that
possibly could be a prerequisite for kernel-mode FPU, such as x86's
xfd_update_static_branch() and loongarch's init_euen_mask().
Note: as far as I can tell, x86's xfd_update_static_branch() isn't
*actually* needed for kernel-mode FPU. loongarch's init_euen_mask() is
needed to enable save/restore of the vector registers, but loongarch
doesn't yet have any CRC or crypto code that uses vector registers
anyway. Regardless, let's be consistent with arch/*/lib/crypto/ and
robust against any potential future dependency on an arch_initcall.
Link: https://lore.kernel.org/r/20250510035959.87995-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Move this macro to the canonical TIMER_* namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-7-mingo@kernel.org
|
|
Rename poly1305_emit_64 to poly1305_emit_arch to conform with
the expectation of the poly1305 library.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Fixes: 14d31979145d ("crypto: powerpc/poly1305 - Add block-only interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Similar to x86 the ppc boot code does not build with GCC 15.
Copy the fix from
commit ee2ab467bddf ("x86/boot: Use '-std=gnu11' to fix build with GCC 15")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250331105722.19709-1-msuchanek@suse.de
|
|
Export the block functions as GPL only, there is no reason
to let arbitrary modules use these internal functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit c4741b23059794bd99beef0f700103b0d983b3fd.
Crypto API self-tests no longer run at registration time and now
occur either at late_initcall or upon the first use.
Therefore the premise of the above commit no longer exists. Revert
it and subsequent additions of subsys_initcall and arch_initcall.
Note that lib/crypto calls will stay at subsys_initcall (or rather
downgraded from arch_initcall) because they may need to occur
before Crypto API registration.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that every architecture provides a block function, use that
to implement the lib/poly1305 and remove the old per-arch code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add block-only interface.
Also remove the unnecessary SIMD fallback path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge mainline to pick up bcachefs poly1305 patch 4bf4b5046de0
("bcachefs: use library APIs for ChaCha20 and Poly1305"). This
is a prerequisite for removing the poly1305 shash algorithm.
|
|
Support dumping HTM capabilities information from Hardware
Trace Macro (HTM) function via debugfs interface. Under
debugfs folder "/sys/kernel/debug/powerpc/htmdump", add
file "htmcaps".
The interface allows only read of this file which will present the
content of HTM buffer from the hcall.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-9-atrajeev@linux.ibm.com
|
|
Under debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file
"htmflags". Currently supported flag value is to enable/disable
HTM buffer wrap. wrap is used along with "configure" to prevent
HTM buffer from wrapping. Writing 1 will set noWrap while
configuring HTM
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-8-atrajeev@linux.ibm.com
|
|
Add htm setup support to htmdump module. To use the
HTM (Hardware Trace Macro), HTM buffer has to be allocated.
Support setup of HTM buffers via debugfs interface. Under
debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file
"htmsetup". The interface allows setup of HTM buffer by writing
size of HTM buffer in power of 2 to the "htmsetup" file
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-7-atrajeev@linux.ibm.com
|
|
Support dumping system processor configuration from Hardware
Trace Macro (HTM) function via debugfs interface. Under
debugfs folder "/sys/kernel/debug/powerpc/htmdump", add
file "htminfo".
The interface allows only read of this file which will present the
content of HTM buffer from the hcall. The 16th offset of HTM
buffer has value for the number of entries for array of processors.
Use this information to copy data to the debugfs file
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-6-atrajeev@linux.ibm.com
|
|
Support dumping status of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmstatus".
The interface allows only read of this file which will present the
content of HTM status buffer from the hcall. The 16th offset of HTM
status buffer has value for the number of HTM entries in the status
buffer. Each nest htm status entry is 0x6 bytes, where as core HTM
status entry is 0x8 bytes. Calculate the number of bytes to read
based on this detail.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-5-atrajeev@linux.ibm.com
|
|
Support starting of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmstart".
The interface allows starting of htm via this file by
writing value "1". Also allows stopping of htm tracing by
writing value "0" to this file. Any other value returns
-EINVAL.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-4-atrajeev@linux.ibm.com
|
|
Support configuring of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmconfigure".
The interface allows configuring of htm via this file
by writing value "1". Allow deconfiguring of htm via this file
by writing value "0". Any other value returns -EINVAL.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-3-atrajeev@linux.ibm.com
|
|
H_HTM (Hardware Trace Macro) hypervisor call is an HCALL to export data
from Hardware Trace Macro (HTM) function. The debugfs interface to
export the HTM function data in an lpar currently supports only dumping
of HTM data in an lpar. To add support for setup, configuration and
control of HTM function via debugfs interface, update the hcall wrapper
function. Rename and update htm_get_dump_hardware to htm_hcall_wrapper()
so that it can be used for other HTM operations as well. Additionally
include parameter "htm_op". Update htmdump module to check the return
code of hcall in a separate function so that it can be reused for other
option too. Add check to disable the interface in guest environment.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-2-atrajeev@linux.ibm.com
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc 8xx
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-5-488e43e325bf@linaro.org
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-4-488e43e325bf@linaro.org
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-3-488e43e325bf@linaro.org
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-2-488e43e325bf@linaro.org
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-1-488e43e325bf@linaro.org
|
|
Fix the following build warning:
usr/include/asm/papr-platform-dump.h:12: found __[us]{8,16,32,64} type without #include <linux/types.h>
Fixes: 8aa9efc0be66 ("powerpc/pseries: Add papr-platform-dump character driver for dump retrieval")
Closes: https://lore.kernel.org/linux-next/20250429185735.034ba678@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
[Maddy: fixed the commit to combine tags together]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250429211419.1081354-1-haren@linux.ibm.com
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a kernel log containing --- at the start of a line is copied into
a patch message, 'git am' drops everything located after that ---.
Replace --- by ---- to avoid that.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/54a1f8d2c3fb5b95434039724c8c141052ae5cc0.1739346038.git.christophe.leroy@csgroup.eu
|
|
In non-smp configurations, crash_kexec_prepare is never called in
the crash shutdown path. One result of this is that the crashing_cpu
variable is never set, preventing crash_save_cpu from storing the
NT_PRSTATUS elf note in the core dump.
Fixes: c7255058b543 ("powerpc/crash: save cpu register data in crash_smp_send_stop()")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250211162054.857762-1-eajames@linux.ibm.com
|
|
The Fixes commit below tried to add CONFIG_PPC_BOOK3S to one of the
conditions to enable the build of ppc_save_regs.o. But it failed to do
so, in fact. The commit omitted to add a dollar sign.
Therefore, ppc_save_regs.o is built always these days (as
"(CONFIG_PPC_BOOK3S)" is never an empty string).
Fix this by adding the missing dollar sign.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250417105305.397128-1-jirislaby@kernel.org
|
|
When a system is being suspended to RAM, the PCI devices are also
suspended and the PPC code ends up calling pseries_msi_compose_msg() and
this triggers the BUG_ON() in __pci_read_msi_msg() because the device at
this point is in reduced power state. In reduced power state, the memory
mapped registers of the PCI device are not accessible.
To replicate the bug:
1. Make sure deep sleep is selected
# cat /sys/power/mem_sleep
s2idle [deep]
2. Make sure console is not suspended (so that dmesg logs are visible)
echo N > /sys/module/printk/parameters/console_suspend
3. Suspend the system
echo mem > /sys/power/state
To fix this behaviour, read the cached msi message of the device when the
device is not in PCI_D0 power state instead of touching the hardware.
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250305090237.294633-1-gautam@linux.ibm.com
|
|
arch_bpf_trampoline_size() provides JIT size of the BPF trampoline
before the buffer for JIT'ing it is allocated. The total number of
instructions emitted for BPF trampoline JIT code depends on where
the final image is located. So, the size arrived at with the dummy
pass in arch_bpf_trampoline_size() can vary from the actual size
needed in arch_prepare_bpf_trampoline(). When the instructions
accounted in arch_bpf_trampoline_size() is less than the number of
instructions emitted during the actual JIT compile of the trampoline,
the below warning is produced:
WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc
which is:
/* Make sure the trampoline generation logic doesn't overflow */
if (image && WARN_ON_ONCE(&image[ctx->idx] >
(u32 *)rw_image_end - BPF_INSN_SAFETY)) {
So, during the dummy pass, instead of providing some arbitrary image
location, account for maximum possible instructions if and when there
is a dependency with image location for JIT'ing.
Fixes: d243b62b7bd3 ("powerpc64/bpf: Add support for bpf trampolines")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/6168bfc8-659f-4b5a-a6fb-90a916dde3b3@linux.ibm.com/
Cc: stable@vger.kernel.org # v6.13+
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250422082609.949301-1-hbathini@linux.ibm.com
|
|
While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is
not restored in livepatch sequence leading to not so obvious fails
like below:
BUG: Unable to handle kernel data access on write at 0xc0000000000f9078
Faulting instruction address: 0xc0000000018ff958
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790
REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000
CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1
GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488
GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d
GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000
GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070
GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88
GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000
GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078
...
Call Trace:
check_heap_object+0x34/0x390 (unreliable)
__mutex_unlock_slowpath.isra.0+0xe4/0x230
seq_read_iter+0x430/0xa90
proc_reg_read_iter+0xa4/0x200
vfs_read+0x41c/0x510
ksys_read+0xa4/0x190
system_call_exception+0x1d0/0x440
system_call_vectored_common+0x15c/0x2ec
Fix it by restoring r15 always.
Fixes: eec37961a56a ("powerpc64/ftrace: Move ftrace sequence out of line")
Reported-by: Viktor Malik <vmalik@redhat.com>
Closes: https://lore.kernel.org/lkml/1aec4a9a-a30b-43fd-b303-7a351caeccb7@redhat.com
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416191227.201146-1-hbathini@linux.ibm.com
|
|
Rename crc32-vpmsum_core.S to crc-vpmsum-template.S to properly convey
that (a) it actually generates code for both 32-bit and 16-bit CRCs, not
just 32-bit CRCs; and (b) it has "template" semantics, like x86's
crc-pclmul-template.S, in the sense that it's included by other files.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250424002038.179114-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The use of the term "glue" in filenames is a Crypto API-ism that rarely
shows up elsewhere in lib/ or arch/*/lib/. I think adopting it there
was a mistake. The library just uses standard functions, so the amount
of code that could be considered "glue" is quite small. And while often
the C functions just wrap the assembly functions, there are also cases
like crc32c_arch() in arch/x86/lib/crc32-glue.c that blur the line by
in-lining the actual implementation into the C function. That's not
"glue code", but rather the actual code.
Therefore, let's drop "glue" from the filenames and instead use e.g.
crc32.c instead of crc32-glue.c.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250424002038.179114-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
All of the CRC library's CPU feature static_keys are initialized by
initcalls and never change afterwards, so there's no need for them to be
in the regular .data section. Put them in .data..ro_after_init instead.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250413154350.10819-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that the architecture-optimized Poly1305 kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to
the generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the architecture-optimized ChaCha kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the
generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
