| Age | Commit message (Collapse) | Author |
|---|
|
The powerpc kernel/watchdog.o should be built when HARDLOCKUP_DETECTOR
and HAVE_HARDLOCKUP_DETECTOR_ARCH are both selected. If only the former
is selected, then the generic perf watchdog has been selected.
To simplify this check, introduce a new Kconfig symbol PPC_WATCHDOG that
depends on both. This Kconfig option means the powerpc specific
watchdog is enabled.
Without this patch, Book3E will attempt to build the powerpc watchdog.
Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
On 64-bit Book3s, when we're in HV mode, we have already counted the
machine check exception in machine_check_early().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use IS_ENABLED() rather than an #ifdef]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When DLPAR adding or removing memory we need to check the device
offline status before trying to online/offline the memory. This is
needed because calls to device_online() and device_offline() will
return non-zero for memory that is already online and offline
respectively.
This update resolves two scenarios. First, for a kernel built with
auto-online memory enabled (CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y),
memory will be onlined as part of calls to add_memory(). After adding
the memory the pseries DLPAR code tries to online it and fails since
the memory is already online. The DLPAR code then tries to remove the
memory which produces the oops message below because the memory is not
offline.
The second scenario occurs when removing memory that is already
offline, i.e. marking memory offline (via sysfs) and then trying to
remove that memory. This doesn't work because offlining the already
offline memory does not succeed and the DLPAR code then fails the
DLPAR remove operation.
The fix for both scenarios is to check the device.offline status
before making the calls to device_online() or device_offline().
kernel BUG at mm/memory_hotplug.c:1936!
...
NIP [c0000000002ca428] .remove_memory+0xb8/0xc0
LR [c0000000002ca3cc] .remove_memory+0x5c/0xc0
Call Trace:
.remove_memory+0x5c/0xc0 (unreliable)
.dlpar_add_lmb+0x384/0x400
.dlpar_memory+0x5dc/0xca0
.handle_dlpar_errorlog+0x74/0xe0
.pseries_hp_work_fn+0x2c/0x90
.process_one_work+0x17c/0x460
.worker_thread+0x88/0x500
.kthread+0x15c/0x1a0
.ret_from_kernel_thread+0x58/0xc0
Fixes: 943db62c316c ("powerpc/pseries: Revert 'Auto-online hotplugged memory'")
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
[mpe: Use bool, add explicit rc=0 case, change log typos & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
binutils >= 2.26 now warns about misuse of register expressions in
assembler operands that are actually literals, for example:
arch/powerpc/kernel/entry_64.S:535: Warning: invalid register expression
In practice these are almost all uses of r0 that should just be a
literal 0.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Mention r0 is almost always the culprit, fold in purgatory change]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Now that there are no users of smp_mb__before_spinlock() left, remove
it entirely.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since its inception, our understanding of ACQUIRE, esp. as applied to
spinlocks, has changed somewhat. Also, I wonder if, with a simple
change, we cannot make it provide more.
The problem with the comment is that the STORE done by spin_lock isn't
itself ordered by the ACQUIRE, and therefore a later LOAD can pass over
it and cross with any prior STORE, rendering the default WMB
insufficient (pointed out by Alan).
Now, this is only really a problem on PowerPC and ARM64, both of
which already defined smp_mb__before_spinlock() as a smp_mb().
At the same time, we can get a much stronger construct if we place
that same barrier _inside_ the spin_lock(). In that case we upgrade
the RCpc spinlock to an RCsc. That would make all schedule() calls
fully transitive against one another.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This work implements jiting of BPF_J{LT,LE,SLT,SLE} instructions
with BPF_X/BPF_K variants for the ppc64 eBPF JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CPUs start and stop the watchdog, they manipulate shared data
that is normally protected by the lock. Other CPUs can be running
concurrently at this time, so it's a good idea to use locking here
to be on the safe side.
Remove the barrier which is undocumented and didn't do anything.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When the SMP detector finds other CPUs stuck, it iterates over
them and marks them as stuck. This pulls them out of the pending
mask and allows the detector to continue with remaining good
CPUs (if nmi_watchdog=panic is not enabled).
The code to dothat was buggy because when setting a CPU stuck,
if the pending mask became empty, it resets it to keep the
watchdog running. However the iterator will continue to run
over the new pending mask and mark remaining good CPUs sas stuck.
Fix this by doing it with cpumask bitwise operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When the watchdog decides to panic, it takes the lock and double
checks everything (to avoid races with the CPU being unstuck or
panic()ed by something else).
The exit label was misplaced and would result in all-CPUs backtrace
and watchdog panic even in the case that the condition was found to be
resolved.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some code can go into a tight loop calling touch_nmi_watchdog (e.g.,
stop_machine CPU hotplug code). This can cause contention on watchdog
locks particularly if all CPUs with watchdog enabled are spinning in
the loops.
Avoid this storm of activity by running the watchdog timer callback
from this path if we have exceeded the timer period since it was last
run.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
- Hard-disable interrupts before taking the lock, which prevents
soft-NMI re-entrancy and therefore can prevent deadlocks.
- Use raw_ variants of local_irq_disable to avoid irq debugging.
- When the lock is contended, spin at low SMT priority, using
loads only, and with interrupts enabled (where possible).
Some stalls have been noticed at high loads that go away with improved
locking. There should not be so much locking contention in the first
place (which is addressed in a subsequent patch), but locking should
still be improved.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When the NMI IPI lock is contended, spin at low SMT priority, using
loads only, and with interrupts enabled (where possible). This
improves behaviour under high contention (e.g., a system crash when
a number of CPUs are trying to enter the debugger).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In commit 05a4a9527931 ("kernel/watchdog: split up config options"),
CONFIG_LOCKUP_DETECTOR was split into two separate config options,
CONFIG_HARDLOCKUP_DETECTOR and CONFIG_SOFTLOCKUP_DETECTOR.
Our defconfigs still have CONFIG_LOCKUP_DETECTOR=y, but that is no longer
user selectable, and we don't mention the new options, so we end up with
none of them enabled.
So update the defconfigs to turn on the new SOFT and HARD options, the
end result being the same as what we had previously.
Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently, we use the opal call opal_slw_set_reg() to inform the
Sleep-Winkle Engine (SLW) to restore the contents of some of the
Hypervisor state on wakeup from deep idle states that lose full
hypervisor context (characterized by the flag
OPAL_PM_LOSE_FULL_CONTEXT).
However, the current code has a bug in that if opal_slw_set_reg()
fails, we don't disable the use of these deep states (winkle on
POWER8, stop4 onwards on POWER9).
This patch fixes this bug by ensuring that if programing the
sleep-winkle engine to restore the hypervisor states in
pnv_save_sprs_for_deep_states() fails, then we exclude such states by
clearing the OPAL_PM_LOSE_FULL_CONTEXT flag from
supported_cpuidle_states. As a result POWER8 will be prevented from
using winkle for CPU-Hotplug, and POWER9 will put the offlined CPUs to
the default stop state when available.
Further, we ensure in the initialization of the cpuidle-powernv driver
to only include those states whose flags are present in
supported_cpuidle_states, thereby skipping OPAL_PM_LOSE_FULL_CONTEXT
states when they have been disabled due to stop-api failure.
Fixes: 1e1601b38e6 ("powerpc/powernv/idle: Restore SPRs for deep idle
states via stop API.")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
On 64-bit book3s, with the hash MMU, we currently define the kernel
virtual space (vmalloc, ioremap etc.), to be 16T in size. This is a
leftover from pre v3.7 when our user VM was also 16T.
Of that 16T we split it 50/50, with half used for PCI IO and ioremap
and the other 8T for vmalloc.
We never bothered to make it any bigger because 8T of vmalloc ought to
be enough for anybody. But it turns out that's not true, the per cpu
allocator wants large amounts of vmalloc space, not to make large
allocations, but to allow a large stride between allocations, because
we use pcpu_embed_first_chunk().
With a bit of juggling we can increase the entire kernel virtual space
to 64T. The only real complication is the check of the address in the
SLB miss handler, see the comment in the code.
Although we could continue to split virtual space 50/50 as we do now,
no one seems to be running out of PCI IO or ioremap space. So instead
keep that as 8T, and use the remaining 56T for vmalloc.
In future we should be able to increase the kernel virtual space to
512T, the code already supports that, it just needs testing on older
hardware.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
There is a comment in slb_allocate() referring to the load of
paca->vmalloc_sllp, but it's several lines prior in the assembly.
We're about to change this code, and we want to add another comment,
so move the comment immediately prior to the instruction it's talking
about.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently KERN_IO_START is defined as:
#define KERN_IO_START (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))
Although it looks like a constant, both the components are actually
variables, to allow us to have a different value between Radix and
Hash with a single kernel.
However that still requires both Radix and Hash to place the kernel IO
region at the same location relative to the start and end of the
kernel virtual region (namely 1/2 way through it), and we'd like to
change that.
So split KERN_IO_START out into its own variable, and initialise it
for Radix and Hash. In the medium term we should be able to
reconsolidate this, by doing a more involved rearrangement of the
location of the regions.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This adds powernv_get_random_darn() which utilises the darn instruction,
introduced in ISA v3.0/POWER9.
The darn instruction can potentially return an error, which is supported
by the get_random_seed() API, in normal usage if we see an error we just
return that to the caller.
However when detecting whether darn is functional at boot we try up to
10 times, before deciding that darn doesn't work and failing the
registration of get_random_seed(). That way an intermittent failure
at boot doesn't deprive the system of randomness until the next reboot.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
[mpe: Move init into a function, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit d300627c6a536 ("powerpc/6xx: Handle DABR match before calling
do_page_fault") breaks non 6xx platforms.
Failed to execute /init (error -14)
Starting init: /bin/sh exists but couldn't execute it (error -14)
Kernel panic - not syncing: No working init found. Try passing init= ...
CPU: 0 PID: 1 Comm: init Not tainted 4.13.0-rc3-s3k-dev-00143-g7aa62e972a56 #56
Call Trace:
panic+0x108/0x250 (unreliable)
rootfs_mount+0x0/0x58
ret_from_kernel_thread+0x5c/0x64
Rebooting in 180 seconds..
This is because in handle_page_fault(), the call to do_page_fault() has been
mistakenly enclosed inside an #ifdef CONFIG_6xx
Fixes: d300627c6a536 ("powerpc/6xx: Handle DABR match before calling do_page_fault")
Brown-paper-bag-to-be-worn-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
If a vcpu exits due to request a user mode spinlock, then
the spinlock-holder may be preempted in user mode or kernel mode.
(Note that not all architectures trap spin loops in user mode,
only AMD x86 and ARM/ARM64 currently do).
But if a vcpu exits in kernel mode, then the holder must be
preempted in kernel mode, so we should choose a vcpu in kernel mode
as a more likely candidate for the lock holder.
This introduces kvm_arch_vcpu_in_kernel() to decide whether the
vcpu is in kernel-mode when it's preempted. kvm_vcpu_on_spin's
new argument says the same of the spinning VCPU.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
P9 has support for PCI peer-to-peer, enabling a device to write in the
MMIO space of another device directly, without interrupting the CPU.
This patch adds support for it on powernv, by adding a new API to be
called by drivers. The pnv_pci_set_p2p(...) call configures an
'initiator', i.e the device which will issue the MMIO operation, and a
'target', i.e. the device on the receiving side.
P9 really only supports MMIO stores for the time being but that's
expected to change in the future, so the API allows to define both
load and store operations.
/* PCI p2p descriptor */
#define OPAL_PCI_P2P_ENABLE 0x1
#define OPAL_PCI_P2P_LOAD 0x2
#define OPAL_PCI_P2P_STORE 0x4
int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
u64 desc)
It uses a new OPAL call, as the configuration magic is done on the
PHBs by skiboot.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This reverts commit bc4f65e4cf9d6cc43e0e9ba0b8648cf9201cd55f.
As reported by Andreas, this commit is causing unrecoverable SLB misses in the
system call exit path:
Unrecoverable exception 4100 at c00000000000a1ec
Oops: Unrecoverable exception, sig: 6 [#1]
SMP NR_CPUS=2 PowerMac
...
CPU: 0 PID: 18626 Comm: rm Not tainted 4.13.0-rc3 #1
task: c00000018335e080 task.stack: c000000139e50000
NIP: c00000000000a1ec LR: c00000000000a118 CTR: 0000000000000000
REGS: c000000139e53bb0 TRAP: 4100 Not tainted (4.13.0-rc3)
MSR: 9000000000001030 <SF,HV,ME,IR,DR> CR: 24000044 XER: 20000000 SOFTE: 1
GPR00: 0000000000000000 c000000139e53e30 c000000000abb500 fffffffffffffffe
GPR04: c0000001eb866298 0000000000000000 0000000000000000 c00000018335e080
GPR08: 900000000000d032 0000000000000000 0000000000000002 fffffffffffff001
GPR12: c000000139e50000 c00000000ffff000 00003fffa8c0dca0 00003fffa8c0dc88
GPR16: 0000000010000000 0000000000000001 00003fffa8c0eaa0 0000000000000000
GPR20: 00003fffa8c27528 00003fffa8c27b00 0000000000000000 0000000000000000
GPR24: 00003fffa8c0d918 00003ffff1b3efa0 00003fffa8c26d68 0000000000000000
GPR28: 00003fffa8c249e8 00003fffa8c263d0 00003fffa8c27550 00003ffff1b3ef10
NIP [c00000000000a1ec] system_call_exit+0xc0/0x21c
LR [c00000000000a118] system_call+0x58/0x6c
Call Trace:
[c000000139e53e30] [c00000000000a118] system_call+0x58/0x6c (unreliable)
Instruction dump:
64a51000 7c6300d0 f8a101a0 4bffff9c 3c000000 60000006 780007c6 64000000
60000000 7c004039 4082001c e8ed0170 <88070b78> 88c70b79 7c003214 2c200000
This is caused by us trying to load THREAD_LOAD_FP with MSR_RI=0, and taking an
SLB miss on the thread struct.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Diagnosed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for recently merged code:
- a fix for the _PAGE_DEVMAP support, which was breaking KVM on
Power9 radix
- avoid a (harmless) lockdep warning in the early SMP code
- return failure for some uses of dma_set_mask() rather than falling
back to 32-bits
- fix stack setup in watchdog soft_nmi_common() to use emergency
stack
- fix of_irq_to_resource() error check in of_fsl_spi_probe()
Two fixes going to stable:
- fix saving of Transactional Memory SPRs in core dump
- fix __check_irq_replay missing decrementer interrupt
And two misc:
- fix 64-bit boot wrapper build with non-biarch compiler
- work around a POWER9 PMU hang after state-loss idle
Thanks to: Alistair Popple, Aneesh Kumar K.V, Cyril Bur, Gustavo
Romero, Jose Ricardo Ziviani, Laurent Vivier, Nicholas Piggin, Oliver
O'Halloran, Sergei Shtylyov, Suraj Jitindar Singh, Thomas Gleixner"
* tag 'powerpc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Fix __check_irq_replay missing decrementer interrupt
powerpc/perf: POWER9 PMU stops after idle workaround
powerpc/83xx/mpc832x_rdb: fix of_irq_to_resource() error check
powerpc/64s: Fix stack setup in watchdog soft_nmi_common()
powerpc/powernv/pci: Return failure for some uses of dma_set_mask()
powerpc/boot: Fix 64-bit boot wrapper build with non-biarch compiler
powerpc/smp: Call smp_ops->setup_cpu() directly on the boot CPU
powerpc/tm: Fix saving of TM SPRs in core dump
powerpc/mm: Fix pmd/pte_devmap() on non-leaf entries
|
|
If the decrementer wraps again and de-asserts the decrementer
exception while hard-disabled, __check_irq_replay() has a test to
notice the wrap when interrupts are re-enabled.
The decrementer check must be done when clearing the PACA_IRQ_HARD_DIS
flag, not when the PACA_IRQ_DEC flag is tested. Previously this worked
because the decrementer interrupt was always the first one checked
after clearing the hard disable flag, but HMI check was moved ahead of
that, which introduced this bug.
This can cause a missed decrementer interrupt if we soft-disable
interrupts then take an HMI which is recorded in irq_happened, then
hard-disable interrupts for > 4s to wrap the decrementer.
Fixes: e0e0d6b7390b ("powerpc/64: Replay hypervisor maintenance interrupt first")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
POWER9 DD2 PMU can stop after a state-loss idle in some conditions.
A solution is to set then clear MMCRA[60] after wake from state-loss
idle. MMCRA[60] is a non-architected bit, see the user manual for
details.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We have a whole pile of unused code to maintain the ACOP register,
allocate coprocessor PIDs and handle ACOP faults. This mechanism
was used for the HFI adapter on POWER7 which is dead and gone and
whose driver never went upstream. It was used on some A2 core based
stuff that also never saw the light of day.
Take out all that code.
There is still some POWER8 coprocessor code that uses icswx but it's
kernel only and thus doesn't use any of that infrastructure.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When hitting below a VM_GROWSDOWN vma (typically growing the stack),
we check whether it's a valid stack-growing instruction and we
check the distance to GPR1. This is largely open coded with lots
of comments, so move it out to a helper.
While at it, make store_update_sp a boolean.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
If the first iteration returns VM_FAULT_MAJOR but the second
one doesn't, we fail to account the fault as a major fault.
This fixes it and brings the code in line with x86.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Move out the code that sets FAULT_FLAG_WRITE so the block that check
access permissions can be extracted. While at it also set
FAULT_FLAG_INSTRUCTION which will be used for protection keys.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Mostly for the failure cases
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Do the check before we re-enable interrupts and clean the code
up a bit.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This has a page of comment explaining what's going on right in
the middle of do_page_fault() which makes things a bit hard to
follow. Move it to a helper instead. Also do the test earlier
as there's no point waiting until after we found the VMA.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
No need to break those lines, they aren't that long
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
It makes do_page_fault() more readable. No functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
First, handle the normal retry failure in do_page_fault itself,
since it's a simple return statement. That allows us to remove
the "continue" special return code from mm_fault_error().
Once that's done, we can have an implementation much closer to
x86 where we only call mm_fault_error() if VM_FAULT_ERROR is set
and directly return.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Instead of goto labels, instead call those functions and return.
This gets us closer to x86 and allows us to shring do_page_fault()
even more.
The main difference with x86 is that those function return a value
which we then return from do_page_fault(). That value is our
return value from do_page_fault() which we use to generate
kernel faults.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We currently test for is_exec and DSISR_PROTFAULT but that doesn't
make sense as this is the wrong error bit to test for an execute
permission failure.
In fact, we had code that would return early if we had an exec
fault in kernel mode so I think that was just dead code anyway.
Finally the location of that test is awkward and prevents further
simplifications.
So instead move that test into a helper along with the existing
early test for kernel exec faults and out of range accesses,
and put it all in a "bad_kernel_fault()" helper. While at it
test the correct error bits.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Now that we moved the exception state handling to a wrapper, we can
just directly return rather than "goto bail"
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
unclutters the main path
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
A bad page fault is when the HW signals an error such as a bad
copy/paste, an AMO error, or some other type of error that will
not be fixed by updating the PTE.
Use a helper page_fault_is_bad() to check for bad page faults thus
removing the per-processor family open-coding in __do_page_fault()
and trigger a SIGBUS rather than a SIGSEGV which is more appropriate.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There's no point looking for the VMA etc.. when we already know
we are going to fail.
This adds some code to set "code" for the si_code but that will
be gone in subsequent patches.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Define a common page_fault_is_write() helper and use it
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This uses the newly defined constants for this rather than open-coded
numbers. There is a side effect on 64-bit which is to pass through
some of the new P9 bits which we didn't before.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We test a number of bits from DSISR/SRR1 before deciding
to call hash_page(). If any of these is set, we go directly
to do_page_fault() as the bit indicate a fault that needs
to be handled there (no hashing needed).
This updates the current open-coded masks to use the new
DSISR definitions.
This *does* change the masks actually used in two ways:
- We used to test various bits that were defined as "always 0"
in the architecture and could be repurposed for something
else. From now on, we just ignore such bits.
- We were missing some new bits defined on P9
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This updates the definitions for the various DSISR bits to
match both some historical stuff and to match new bits on
POWER9.
In addition, we define some masks corresponding to the "bad"
faults on Book3S, and some masks corresponding to the bits
that match between DSISR and SRR1 for a DSI and an ISI.
This comes with a small code update to change the definition
of DSISR_PGDIRFAULT which becomes DSISR_PRTABLE_FAULT to
match architecture 3.0B
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
On legacy 6xx 32-bit procesors, we checked for the DABR match bit
in DSISR from do_page_fault(), in the middle of a pile of ifdef's
because all other CPU types do it in assembly prior to calling
do_page_fault. Fix that.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Add #ifdef CONFIG_6xx]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
of_irq_to_resource() has recently been fixed to return negative error #'s
along with 0 in case of failure, however the Freescale MPC832x RDB board
code still only regards 0 as a failure indication -- fix it up.
Fixes: 7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
By filtering the relevant SRR1 bits in the assembly rather than
in do_page_fault() itself, we avoid a conditional branch (since we
already come from different path for data and instruction faults).
This will allow more simplifications later
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
