summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/85xx
AgeCommit message (Collapse)Author
2023-06-21powerpc: drop MPC85xx_CDS platform supportPaul Gortmaker
The MPC8541/8548/8555 Configurable Development System (CDS) were the vehicle used to provide evaluation of the 1st e500-v2 CPUs around 2007. Similar to the earlier MPC83xx-MDS systems we removed, the "brains" exist on a PCI-X card, but additional connectors exist to the right of the PCI-X slot, two structural metal pins are used to provide stability in a vertical ATX mounting, and the CPU is now on a daughter-card vs. a clamped down BGA. Given the extra complexity and risk of connector damage, the 8548CDS I had access to came pre-assembled in a basic white Antec case common for that era, and I'm inclined to assume that was the default. Power was typical "Pentium4" 2005 ATX - the main 20 pin connector went to the PCI ATX form factor backplane, and the 4 pin black/yellow went to the CPU card. Like previous evaluation boards, they attempted to provide break-out connectors for as many features as possible, and that made for a fairly complex looking system. In any case, these are over 15 years old, and fairly complex systems, originally made for a small group of industry related people, and made for use where quiet fan operation wasn't important. Given that, it makes sense to remove support from them in 2023. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230620043300.197546-3-paul.gortmaker@windriver.com
2023-06-21powerpc: drop MPC8540_ADS and MPC8560_ADS platform supportPaul Gortmaker
Based on the revision history in the manual(s), these e500-v1 platforms were first available around 2002. Like a lot of evaluation boards, they attempted to provide break-out connectors for all possible features, and that combined with four PCI-X slots (and the age/era) meant for a considerably large board. As I recall it, from a Linux point of view, the biggest difference between 8540 and 8560 was in the UART implementation, and that is reflected in a diff of the defconfigs. In any case, these are over 20 years old, and by today's standards only have a small amount of DDR1 memory, and were not widely available. Given that, it makes sense to remove support from them in 2023. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com
2023-04-20powerpc/85xx: p2020: Enable boards by new config option CONFIG_PPC_P2020Pali Rohár
Generic unified P2020 machine description which supports all P2020-based boards is now in separate file p2020.c. So create a separate config option CONFIG_PPC_P2020 for it. Previously machine descriptions for P2020 boards were enabled by CONFIG_MPC85xx_DS or CONFIG_MPC85xx_RDB option. So set CONFIG_PPC_P2020 to be enabled by default when one of those option is enabled. This allows to compile support for P2020 boards without need to have enabled support for older mpc85xx boards. And to compile kernel for old mpc85xx boards without having enabled support for new P2020 boards. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-13-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Define just one machine descriptionPali Rohár
Combine machine descriptions and code of all P2020 boards into just one generic unified P2020 machine description. This allows kernel to boot on any P2020-based board with P2020 DTS file without need to patch kernel and define a new machine description in 85xx powerpc platform directory. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-12-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Unify .setup_arch and .init_IRQ callbacksPali Rohár
Make just one .setup_arch and one .init_IRQ callback implementation for all P2020 board code. This deduplicate repeated and same code. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-11-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_ds: Move i8259 code into own filePali Rohár
In order to share mpc85xx i8259 code between DS and P2020. Prefix i8259 debug and error messages by i8259 word. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix some coding style warnings in the moved code] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-10-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Move all P2020 RDB machine descriptions to p2020.cPali Rohár
This moves P2020 RDB machine descriptions into new p2020.c source file. This is preparation for code de-duplication and providing one unified machine description for all P2020 boards. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-9-pali@kernel.org
2023-04-20powerpc/85xx: p2020: Move all P2020 DS machine descriptions to p2020.cPali Rohár
This moves P2020 DS machine descriptions into new p2020.c source file. This is preparation for code de-duplication and providing one unified machine description for all P2020 boards. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-8-pali@kernel.org
2023-04-20powerpc/85xx: Remove #ifdef CONFIG_QUICC_ENGINE in mpc85xx_rdbChristophe Leroy
mpc85xx_qe_par_io_init() is a stub when CONFIG_QUICC_ENGINE is not set. CONFIG_UCC_GETH and CONFIG_SERIAL_QE depend on CONFIG_QUICC_ENGINE. Remove #ifdef CONFIG_QUICC_ENGINE Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-7-pali@kernel.org
2023-04-20powerpc/85xx: Remove #ifdefs CONFIG_PPC_I8259 in mpc85xx_dsChristophe Leroy
All necessary items are declared all the time, no need to use a #ifdef CONFIG_PPC_I8259. Refactor CONFIG_PPC_I8259 actions into a dedicated init function. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-6-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_{ds/rdb} replace prink by pr_xxx macroChristophe Leroy
Use pr_debug() instead of printk(KERN_DEBUG Use pr_err() instead of printk(KERN_ERR Use pr_info() instead of printk(KERN_INFO or printk(" Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-5-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_{ds/rdb} replace BUG_ON() by WARN_ON()Christophe Leroy
No need to BUG() in case mpic_alloc() fails. Use WARN_ON(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-4-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_{ds/rdb} compact the call to mpic_alloc()Christophe Leroy
Reduce number of lines in the call to mpic_alloc(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-3-pali@kernel.org
2023-04-20powerpc/85xx: Remove DBG() macroChristophe Leroy
DBG() macro is defined at three places while used only one time at one place. Replace its only use by a pr_debug() and remove the macro. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230408140122.25293-2-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_rdb: Do not automatically select FSL_ULI1575Pali Rohár
Boards provided by CONFIG_MPC85xx_RDB option do not initialize fsl_uli1575.c driver. So remove explicit select dependency on it. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-6-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_ds: Move uli_init() code into its own driver filePali Rohár
Move uli_init() function into existing driver fsl_uli1575.c file in order to share its code between more platforms and board files. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-5-pali@kernel.org
2023-04-20powerpc/fsl_uli1575: Simplify uli_exclude_device() usagePali Rohár
Function uli_exclude_device() is called only from mpc86xx_exclude_device() and mpc85xx_exclude_device() functions. Both those functions are same, so merge its logic directly into the uli_exclude_device() function. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-4-pali@kernel.org
2023-04-20powerpc/85xx: mpc85xx_ds: Simplify mpc85xx_exclude_device() functionPali Rohár
Function mpc85xx_exclude_device() is installed and used only when pci_with_uli is fsl_pci_primary. So replace check for pci_with_uli by fsl_pci_primary in mpc85xx_exclude_device() and move pci_with_uli variable declaration into function mpc85xx_ds_uli_init() where it is used. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-3-pali@kernel.org
2023-04-20powerpc/fsl_uli1575: Misc cleanupChristophe Leroy
Use a single line for uli_exclude_device(). Add uli_exclude_device() prototype in ppc-pci.h and guard it. Remove that prototype from mpc85xx_ds.c and mpc86xx_hpcn.c files. Make uli_pirq_to_irq[] static as it is used only in that file. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230409000812.18904-2-pali@kernel.org
2023-03-16powerpc: Make generic_calibrate_decr() the defaultChristophe Leroy
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never checked so it must be non null on all platforms. Most platforms define generic_calibrate_decr() as their ppc_md.calibrate_decr(). Have time_init() call generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL, and remove default assignment from all machines. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-16powerpc/85xx: Fix function naming for p1023_rdb platformChristophe Leroy
p1023_rdb platform is a copy of mpc85xx_rdb platform and some of its functions have kept mpc85xx_rdb names. Rename the said functions. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-15powerpc/platforms: Use 'compatible' property for simple casesChristophe Leroy
Use the new 'compatible' property for simple cases. checkpatch complains about the new compatible being undocumented but in reality nothing is new so just ignore it for the time being. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2022-11-24powerpc/sgy_cts1000: convert to using gpiod API and faceliftDmitry Torokhov
This patch converts the driver to newer gpiod API, and away from OF-specific legacy gpio API that we want to stop using. While at it, let's address a few more issues: - switch to using dev_info()/pr_info() and friends - cancel work when unbinding the driver Note that the original code handled halt GPIO polarity incorrectly: in halt callback, when line polarity is "low" it would set trigger to "1" and drive halt line high, which is counter to the annotation. gpiod API will drive such line low. However I do not see any DTSes in mainline that have a DT node with "sgy,gpio-halt" compatible. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YzNNznewTyCJiGFz@google.com
2022-09-26powerpc: Cleanup idle for e500Christophe Leroy
e500 idle setup is a bit messy. e500_idle() is used for PPC32 while book3e_idle() is used for PPC64. As they are mutually exclusive, call them all e500_idle(). Use CONFIG_MPC_85xx instead of PPC32 + E500 in Makefile and rename idle_e500.c to idle_85xx.c . Rename idle_book3e.c to idle_64e.c and remove #ifdef PPC64 in as it's only built on PPC64. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8039301334e948974c85ec5ef2db37751075185b.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Replace PPC_85xx || PPC_BOOKE_64 by PPC_E500Christophe Leroy
PPC_E500 is the same as PPC_85xx || PPC_BOOKE_64 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/af79696f8cb8536fb4e20c0d98a6bf159a9e371b.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove redundant selection of E500 and E500MCChristophe Leroy
PPC_85xx and PPC_BOOK3E_64 already select E500 so no need to select it again by PPC_QEMU_E500 and CORENET_GENERIC as they depend on PPC_85xx || PPC_BOOK3E_64. PPC_BOOK3E_64 already selects E500MC so no need to select it again by PPC_QEMU_E500 if PPC64, PPC_BOOK3E_64 is the only way into PPC_QEMU_E500 with PPC64. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/44f03fa1506892fabf626dceb2f47a049908b6af.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove CONFIG_PPC_BOOK3EChristophe Leroy
CONFIG_PPC_BOOK3E is redundant with CONFIG_PPC_BOOK3E_64. The later is more explicit about the fact that it's a 64 bits target. Remove CONFIG_PPC_BOOK3E. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5d0891490813c19cdcfc04678f512ea68cba3e64.1663606876.git.christophe.leroy@csgroup.eu
2022-09-08powerpc/85xx: Fix fall-through warning for ClangGustavo A. R. Silva
Fix the following fallthrough warning: arch/powerpc/platforms/85xx/mpc85xx_cds.c:161:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/KSPP/linux/issues/198 Link: https://lore.kernel.org/lkml/202209061224.KxORRGVg-lkp@intel.com/ Link: https://lore.kernel.org/r/Yxe8XTY5C9qJLd0Z@work
2022-09-05powerpc/85xx: Add missing of_node_get/put() in ge_imp3a_pci_assign_primary()Liang He
for_each_node_by_type() will automatically increase and decrease the refcount during the iteration. However, there is a reference escaped into global 'fsl_pci_primary' and we need to handle it. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220701140119.245435-1-windhl@126.com
2022-09-05powerpc/85xx: Add missing of_node_put() in sgy_cst1000Liang He
In gpio_halt_probe(), of_find_matching_node() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() in the failure path. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220617105011.4041123-1-windhl@126.com
2022-09-05powerpc/85xx: Add missing of_node_put() in ksi8560.cLiang He
In ksi8560_setup_arch(), of_find_compatible_node() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220616132922.3987053-1-windhl@126.com
2022-07-28powerpc/85xx: Fix description of MPC85xx and P1/P2 boards optionsPali Rohár
More MPC85xx and P1/P2 boards options have incorrect description. Fix them to include list of all boards for which they enable/disable support. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220709124305.17559-1-pali@kernel.org
2022-05-22powerpc/85xx: Remove FSL_85XX_CACHE_SRAMChristophe Leroy
CONFIG_FSL_85XX_CACHE_SRAM is an option that is not user selectable and which is not selected by any driver nor any defconfig. Remove it and all associated code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9949813a6b758903b7bee910f798ba2ca82ff8ee.1648720908.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Add missing headersChristophe Leroy
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy
Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
2022-05-05powerpc: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
2022-04-27powerpc/85xx: Fix virt_to_phys() off-by-one in smp_85xx_start_cpu()Michael Ellerman
In smp_85xx_start_cpu() we are passed an address but we're unsure if it's a real or virtual address, so there's a check to determine that. The check has an off-by-one in that it tests if the address is greater than high_memory, but high_memory is the first address of high memory, so the check should be greater-or-equal. It seems this has never been a problem in practice, but it also triggers the DEBUG_VIRTUAL checks in __pa() which we would like to avoid. We can fix both issues by converting high_memory - 1 to a physical address and testing against that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220406145802.538416-3-mpe@ellerman.id.au
2022-02-07powerpc/corenet: Change criteria to set MPIC_ENABLE_COREINTChristophe Leroy
Don't use ppc_md function comparison. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c8ef82ee5f2713f4c36eb5d2d49b0905c7472801.1630667612.git.christophe.leroy@csgroup.eu
2022-01-31powerpc/e500/qemu-e500: allow core to idle without waitingTobias Waldekranz
This means an idle guest won't needlessly consume an entire core on the host, waiting for work to show up. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220112112459.1033754-1-troglobit@gmail.com
2022-01-14Merge tag 'powerpc-5.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Optimise radix KVM guest entry/exit by 2x on Power9/Power10. - Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10 or later CPUs. - Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits. - Several fixes and improvements to our hard lockup watchdog. - Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit. - Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only. - Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit). - Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10. - A series of small performance improvements to 64-bit interrupt entry. - Several commits fixing issues when building with the clang integrated assembler. - Many other small features and fixes. Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang Guang. * tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits) powerpc/xmon: Dump XIVE information for online-only processors. powerpc/opal: use default_groups in kobj_type powerpc/cacheinfo: use default_groups in kobj_type powerpc/sched: Remove unused TASK_SIZE_OF powerpc/xive: Add missing null check after calling kmalloc powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API selftests/powerpc: Add a test of sigreturning to an unaligned address powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings powerpc/64s: Mask NIP before checking against SRR0 powerpc/perf: Fix spelling of "its" powerpc/32: Fix boot failure with GCC latent entropy plugin powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests powerpc/code-patching: Move code patching selftests in its own file powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h powerpc/code-patching: Move patch_exception() outside code-patching.c powerpc/code-patching: Use test_trampoline for prefixed patch test powerpc/code-patching: Fix patch_branch() return on out-of-range failure powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling powerpc/code-patching: Fix unmap_patch_area() error handling powerpc/code-patching: Fix error handling in do_patch_instruction() ...
2021-12-23powerpc/85xx: Add __init attribute to eligible functionsNick Child
Some functions defined in 'arch/powerpc/platforms/85xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-19-nick.child@ibm.com
2021-11-29powerpc/85xx: Make c293_pcie_pic_init() staticMichael Ellerman
To fix the W=1 warning: linux/arch/powerpc/platforms/85xx/c293pcie.c:22:13: error: no previous prototype for ‘c293_pcie_pic_init’ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211124093254.1054750-3-mpe@ellerman.id.au
2021-11-29powerpc/85xx: Make mpc85xx_smp_kexec_cpu_down() staticMichael Ellerman
To fix the W=1 warning: arch/powerpc/platforms/85xx/smp.c:369:6: error: no previous prototype for ‘mpc85xx_smp_kexec_cpu_down’ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211124093254.1054750-2-mpe@ellerman.id.au
2021-11-29powerpc/85xx: Fix no previous prototype warning for mpc85xx_setup_pmc()Michael Ellerman
Fixes the following W=1 warning: arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c:89:12: warning: no previous prototype for 'mpc85xx_setup_pmc' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211124093254.1054750-1-mpe@ellerman.id.au
2021-11-29powerpc/85xx: Fix oops when CONFIG_FSL_PMC=nXiaoming Ni
When CONFIG_FSL_PMC is set to n, no value is assigned to cpu_up_prepare in the mpc85xx_pm_ops structure. As a result, oops is triggered in smp_85xx_start_cpu(). smp: Bringing up secondary CPUs ... kernel tried to execute user page (0) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch (NULL pointer?) Faulting instruction address: 0x00000000 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [00000000] 0x0 LR [c0021d2c] smp_85xx_kick_cpu+0xe8/0x568 Call Trace: [c1051da8] [c0021cb8] smp_85xx_kick_cpu+0x74/0x568 (unreliable) [c1051de8] [c0011460] __cpu_up+0xc0/0x228 [c1051e18] [c0031bbc] bringup_cpu+0x30/0x224 [c1051e48] [c0031f3c] cpu_up.constprop.0+0x180/0x33c [c1051e88] [c00322e8] bringup_nonboot_cpus+0x88/0xc8 [c1051eb8] [c07e67bc] smp_init+0x30/0x78 [c1051ed8] [c07d9e28] kernel_init_freeable+0x118/0x2a8 [c1051f18] [c00032d8] kernel_init+0x14/0x124 [c1051f38] [c0010278] ret_from_kernel_thread+0x14/0x1c Fixes: c45361abb918 ("powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n") Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Tested-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211126041153.16926-1-nixiaoming@huawei.com
2021-10-09powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=nXiaoming Ni
When CONFIG_SMP=y, timebase synchronization is required when the second kernel is started. arch/powerpc/kernel/smp.c: int __cpu_up(unsigned int cpu, struct task_struct *tidle) { ... if (smp_ops->give_timebase) smp_ops->give_timebase(); ... } void start_secondary(void *unused) { ... if (smp_ops->take_timebase) smp_ops->take_timebase(); ... } When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n, smp_85xx_ops.give_timebase is NULL, smp_85xx_ops.take_timebase is NULL, As a result, the timebase is not synchronized. Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU. Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
2021-10-09powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be foundXiaoming Ni
When the field described in mpc85xx_smp_guts_ids[] is not configured in dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts" variable. As a result, the oops is triggered when mpc85xx_freeze_time_base() is executed. Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210929033646.39630-2-nixiaoming@huawei.com
2021-08-27powerpc: retire sbc8548 board supportPaul Gortmaker
The support was for this was mainlined 13 years ago, in v2.6.25 [0e0fffe88767] just around the ppc --> powerpc migration. I believe the board was introduced a year or two before that, so it is roughly a 15 year old platform - with the CPU speed and memory size that was typical for that era. I haven't had one of these boards for several years, and availability was discontinued several years before that. Given that, there is no point in adding a burden to testing coverage that builds all possible defconfigs, so it makes sense to remove it. Of course it will remain in the git history forever, for anyone who happens to find a functional board and wants to tinker with it. Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2020-11-19powerpc/85xx: Fix declaration made after definitionMichael Ellerman
Currently the clang build of corenet64_smp_defconfig fails with: arch/powerpc/platforms/85xx/corenet_generic.c:210:1: error: attribute declaration must precede definition machine_arch_initcall(corenet_generic, corenet_gen_publish_devices); Fix it by moving the initcall definition prior to the machine definition, and directly below the function it calls, which is the usual style anyway. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201023020838.3274226-1-mpe@ellerman.id.au
2020-09-18powerpc/smp: Move ppc_md.cpu_die() to smp_ops.cpu_offline_self()Michael Ellerman
We have smp_ops->cpu_die() and ppc_md.cpu_die(). One of them offlines the current CPU and one offlines another CPU, can you guess which is which? Also one is in smp_ops and one is in ppc_md? So rename ppc_md.cpu_die(), to cpu_offline_self(), because that's what it does. And move it into smp_ops where it belongs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015634.1974478-3-mpe@ellerman.id.au
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 07:22:04 +0000