| Age | Commit message (Collapse) | Author |
|---|
|
reset_msr sets the MSR for interrupt injection, but it's cleaner and
more flexible to provide a single op to set both MSR and PC for the
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Currently the reserved bits of the Processor Compatibility
Register (PCR) are cleared as per the Programming Note in Section
1.3.3 of version 3.0B of the Power ISA. This causes all new
architecture features to be made available when running on newer
processors with new architecture features added to the PCR as bits
must be set to disable a given feature.
For example to disable new features added as part of Version 2.07 of
the ISA the corresponding bit in the PCR needs to be set.
As new processor features generally require explicit kernel support
they should be disabled until such support is implemented. Therefore
kernels should set all unknown/reserved bits in the PCR such that any
new architecture features which the kernel does not currently know
about get disabled.
An update is planned to the ISA to clarify that the PCR is an
exception to the Programming Note on reserved bits in Section 1.3.3.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190917004605.22471-2-alistair@popple.id.au
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
|
|
Introduce two options to control the use of the tlbie instruction. A
boot time option which completely disables the kernel using the
instruction, this is currently incompatible with HASH MMU, KVM, and
coherent accelerators.
And a debugfs option can be switched at runtime and avoids using tlbie
for invalidating CPU TLBs for normal process and kernel address
mappings. Coherent accelerators are still managed with tlbie, as will
KVM partition scope translations.
Cross-CPU TLB flushing is implemented with IPIs and tlbiel. This is a
basic implementation which does not attempt to make any optimisation
beyond the tlbie implementation.
This is useful for performance testing among other things. For example
in certain situations on large systems, using IPIs may be faster than
tlbie as they can be directed rather than broadcast. Later we may also
take advantage of the IPIs to do more interesting things such as trim
the mm cpumask more aggressively.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190902152931.17840-7-npiggin@gmail.com
|
|
On POWER9, when userspace reads the value of the DPDES register on a
vCPU, it is possible for 0 to be returned although there is a doorbell
interrupt pending for the vCPU. This can lead to a doorbell interrupt
being lost across migration. If the guest kernel uses doorbell
interrupts for IPIs, then it could malfunction because of the lost
interrupt.
This happens because a newly-generated doorbell interrupt is signalled
by setting vcpu->arch.doorbell_request to 1; the DPDES value in
vcpu->arch.vcore->dpdes is not updated, because it can only be updated
when holding the vcpu mutex, in order to avoid races.
To fix this, we OR in vcpu->arch.doorbell_request when reading the
DPDES value.
Cc: stable@vger.kernel.org # v4.13+
Fixes: 579006944e0d ("KVM: PPC: Book3S HV: Virtualize doorbell facility on POWER9")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
When we are running multiple vcores on the same physical core, they
could be from different VMs and so it is possible that one of the
VMs could have its arch.mmu_ready flag cleared (for example by a
concurrent HPT resize) when we go to run it on a physical core.
We currently check the arch.mmu_ready flag for the primary vcore
but not the flags for the other vcores that will be run alongside
it. This adds that check, and also a check when we select the
secondary vcores from the preempted vcores list.
Cc: stable@vger.kernel.org # v4.14+
Fixes: 38c53af85306 ("KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The Performance Stop Status and Control Register (PSSCR) is used to
control the power saving facilities of the processor. This register
has various fields, some of which can be modified only in hypervisor
state, and others which can be modified in both hypervisor and
privileged non-hypervisor state. The bits which can be modified in
privileged non-hypervisor state are referred to as guest visible.
Currently the L0 hypervisor saves and restores both it's own host
value as well as the guest value of the PSSCR when context switching
between the hypervisor and guest. However a nested hypervisor running
it's own nested guests (as indicated by kvmhv_on_pseries()) doesn't
context switch the PSSCR register. That means if a nested (L2) guest
modifies the PSSCR then the L1 guest hypervisor will run with that
modified value, and if the L1 guest hypervisor modifies the PSSCR and
then goes to run the nested (L2) guest again then the L2 PSSCR value
will be lost.
Fix this by having the (L1) nested hypervisor save and restore both
its host and the guest PSSCR value when entering and exiting a
nested (L2) guest. Note that only the guest visible parts of the PSSCR
are context switched since this is all the L1 nested hypervisor can
access, this is fine however as these are the only fields the L0
hypervisor provides guest control of anyway and so all other fields
are ignored.
This could also have been implemented by adding the PSSCR register to
the hv_regs passed to the L0 hypervisor as input to the H_ENTER_NESTED
hcall, however this would have meant updating the structure layout and
thus required modifications to both the L0 and L1 kernels. Whereas the
approach used doesn't require L0 kernel modifications while achieving
the same result.
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-3-sjitindarsingh@gmail.com
|
|
The performance monitoring unit (PMU) registers are saved on guest
exit when the guest has set the pmcregs_in_use flag in its lppaca, if
it exists, or unconditionally if it doesn't. If a nested guest is
being run then the hypervisor doesn't, and in most cases can't, know
if the PMU registers are in use since it doesn't know the location of
the lppaca for the nested guest, although it may have one for its
immediate guest. This results in the values of these registers being
lost across nested guest entry and exit in the case where the nested
guest was making use of the performance monitoring facility while it's
nested guest hypervisor wasn't.
Further more the hypervisor could interrupt a guest hypervisor between
when it has loaded up the PMU registers and it calling H_ENTER_NESTED
or between returning from the nested guest to the guest hypervisor and
the guest hypervisor reading the PMU registers, in
kvmhv_p9_guest_entry(). This means that it isn't sufficient to just
save the PMU registers when entering or exiting a nested guest, but
that it is necessary to always save the PMU registers whenever a guest
is capable of running nested guests to ensure the register values
aren't lost in the context switch.
Ensure the PMU register values are preserved by always saving their
value into the vcpu struct when a guest is capable of running nested
guests.
This should have minimal performance impact however any impact can be
avoided by booting a guest with "-machine pseries,cap-nested-hv=false"
on the qemu commandline.
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-1-sjitindarsingh@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
as well as some other functions only used by drivers that haven't
(yet?) made it upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf
record -e mem: ...) which could lead to register corruption and
kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
vmalloc when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to
use gas macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
Jitindar Singh, Thiago Jung Bauermann, YueHaibing"
* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
powerpc/eeh: Handle hugepages in ioremap space
ocxl: Update for AFU descriptor template version 1.1
powerpc/boot: pass CONFIG options in a simpler and more robust way
powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
powerpc/module64: Use symbolic instructions names.
powerpc/module32: Use symbolic instructions names.
powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
powerpc/boot: Add lzo support for uImage
powerpc/boot: Add lzma support for uImage
powerpc/boot: don't force gzipped uImage
powerpc/8xx: Add microcode patch to move SMC parameter RAM.
powerpc/8xx: Use IO accessors in microcode programming.
powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
powerpc/8xx: refactor programming of microcode CPM params.
powerpc/8xx: refactor printing of microcode patch name.
powerpc/8xx: Refactor microcode write
powerpc/8xx: refactor writing of CPM microcode arrays
...
|
|
If we enter an L1 guest with a pending decrementer exception then this
is cleared on guest exit if the guest has writtien a positive value
into the decrementer (indicating that it handled the decrementer
exception) since there is no other way to detect that the guest has
handled the pending exception and that it should be dequeued. In the
event that the L1 guest tries to run a nested (L2) guest immediately
after this and the L2 guest decrementer is negative (which is loaded
by L1 before making the H_ENTER_NESTED hcall), then the pending
decrementer exception isn't cleared and the L2 entry is blocked since
L1 has a pending exception, even though L1 may have already handled
the exception and written a positive value for it's decrementer. This
results in a loop of L1 trying to enter the L2 guest and L0 blocking
the entry since L1 has an interrupt pending with the outcome being
that L2 never gets to run and hangs.
Fix this by clearing any pending decrementer exceptions when L1 makes
the H_ENTER_NESTED hcall since it won't do this if it's decrementer
has gone negative, and anyway it's decrementer has been communicated
to L0 in the hdec_expires field and L0 will return control to L1 when
this goes negative by delivering an H_DECREMENTER exception.
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
decrementer
On POWER9 the decrementer can operate in large decrementer mode where
the decrementer is 56 bits and signed extended to 64 bits. When not
operating in this mode the decrementer behaves as a 32 bit decrementer
which is NOT signed extended (as on POWER8).
Currently when reading a guest decrementer value we don't take into
account whether the large decrementer is enabled or not, and this
means the value will be incorrect when the guest is not using the
large decrementer. Fix this by sign extending the value read when the
guest isn't using the large decrementer.
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sprgs are a set of 4 general purpose sprs provided for software use.
SPRG3 is special in that it can also be read from userspace. Thus it is
used on linux to store the cpu and numa id of the process to speed up
syscall access to this information.
This register is overwritten with the guest value on kvm guest entry,
and so needs to be restored on exit again. Thus restore the value on
the guest exit path in kvmhv_p9_guest_entry().
Cc: stable@vger.kernel.org # v4.20+
Fixes: 95a6432ce9038 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Commit 3309bec85e60 ("KVM: PPC: Book3S HV: Fix lockdep warning when
entering the guest") moved calls to trace_hardirqs_{on,off} in the
entry path used for HPT guests. Similar code exists in the new
streamlined entry path used for radix guests on POWER9. This makes
the same change there, so as to avoid lockdep warnings such as this:
[ 228.686461] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
[ 228.686480] WARNING: CPU: 116 PID: 3803 at ../kernel/locking/lockdep.c:4219 check_flags.part.23+0x21c/0x270
[ 228.686544] Modules linked in: vhost_net vhost xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat
+xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter
+ebtables ip6table_filter ip6_tables iptable_filter fuse kvm_hv kvm at24 ipmi_powernv regmap_i2c ipmi_devintf
+uio_pdrv_genirq ofpart ipmi_msghandler uio powernv_flash mtd ibmpowernv opal_prd ip_tables ext4 mbcache jbd2 btrfs
+zstd_decompress zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor
+raid6_pq raid1 raid0 ses sd_mod enclosure scsi_transport_sas ast i2c_opal i2c_algo_bit drm_kms_helper syscopyarea
+sysfillrect sysimgblt fb_sys_fops ttm drm i40e e1000e cxl aacraid tg3 drm_panel_orientation_quirks i2c_core
[ 228.686859] CPU: 116 PID: 3803 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc1-xive+ #42
[ 228.686911] NIP: c0000000001b394c LR: c0000000001b3948 CTR: c000000000bfad20
[ 228.686963] REGS: c000200cdb50f570 TRAP: 0700 Not tainted (5.2.0-rc1-xive+)
[ 228.687001] MSR: 9000000002823033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 48222222 XER: 20040000
[ 228.687060] CFAR: c000000000116db0 IRQMASK: 1
[ 228.687060] GPR00: c0000000001b3948 c000200cdb50f800 c0000000015e7600 000000000000002e
[ 228.687060] GPR04: 0000000000000001 c0000000001c71a0 000000006e655f73 72727563284e4f5f
[ 228.687060] GPR08: 0000200e60680000 0000000000000000 c000200cdb486180 0000000000000000
[ 228.687060] GPR12: 0000000000002000 c000200fff61a680 0000000000000000 00007fffb75c0000
[ 228.687060] GPR16: 0000000000000000 0000000000000000 c0000000017d6900 c000000001124900
[ 228.687060] GPR20: 0000000000000074 c008000006916f68 0000000000000074 0000000000000074
[ 228.687060] GPR24: ffffffffffffffff ffffffffffffffff 0000000000000003 c000200d4b600000
[ 228.687060] GPR28: c000000001627e58 c000000001489908 c000000001627e58 c000000002304de0
[ 228.687377] NIP [c0000000001b394c] check_flags.part.23+0x21c/0x270
[ 228.687415] LR [c0000000001b3948] check_flags.part.23+0x218/0x270
[ 228.687466] Call Trace:
[ 228.687488] [c000200cdb50f800] [c0000000001b3948] check_flags.part.23+0x218/0x270 (unreliable)
[ 228.687542] [c000200cdb50f870] [c0000000001b6548] lock_is_held_type+0x188/0x1c0
[ 228.687595] [c000200cdb50f8d0] [c0000000001d939c] rcu_read_lock_sched_held+0xdc/0x100
[ 228.687646] [c000200cdb50f900] [c0000000001dd704] rcu_note_context_switch+0x304/0x340
[ 228.687701] [c000200cdb50f940] [c0080000068fcc58] kvmhv_run_single_vcpu+0xdb0/0x1120 [kvm_hv]
[ 228.687756] [c000200cdb50fa20] [c0080000068fd5b0] kvmppc_vcpu_run_hv+0x5e8/0xe40 [kvm_hv]
[ 228.687816] [c000200cdb50faf0] [c0080000071797dc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[ 228.687863] [c000200cdb50fb10] [c0080000071755dc] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[ 228.687916] [c000200cdb50fba0] [c008000007165ccc] kvm_vcpu_ioctl+0x424/0x838 [kvm]
[ 228.687957] [c000200cdb50fd10] [c000000000433a24] do_vfs_ioctl+0xd4/0xcd0
[ 228.687995] [c000200cdb50fdb0] [c000000000434724] ksys_ioctl+0x104/0x120
[ 228.688033] [c000200cdb50fe00] [c000000000434768] sys_ioctl+0x28/0x80
[ 228.688072] [c000200cdb50fe20] [c00000000000b888] system_call+0x5c/0x70
[ 228.688109] Instruction dump:
[ 228.688142] 4bf6342d 60000000 0fe00000 e8010080 7c0803a6 4bfffe60 3c82ff87 3c62ff87
[ 228.688196] 388472d0 3863d738 4bf63405 60000000 <0fe00000> 4bffff4c 3c82ff87 3c62ff87
[ 228.688251] irq event stamp: 205
[ 228.688287] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv]
[ 228.688344] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv]
[ 228.688412] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4
[ 228.688464] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210
[ 228.688513] ---[ end trace eb16f6260022a812 ]---
[ 228.688548] possible reason: unannotated irqs-off.
[ 228.688571] irq event stamp: 205
[ 228.688607] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv]
[ 228.688664] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv]
[ 228.688719] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4
[ 228.688758] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210
Cc: stable@vger.kernel.org # v4.20+
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Currently the HV KVM code takes the kvm->lock around calls to
kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call
kvm_for_each_vcpu() internally). However, that leads to a lock
order inversion problem, because these are called in contexts where
the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock
according to Documentation/virtual/kvm/locking.txt. Hence there
is a possibility of deadlock.
To fix this, we simply don't take the kvm->lock mutex around these
calls. This is safe because the implementations of kvm_for_each_vcpu()
and kvm_get_vcpu_by_id() have been designed to be able to be called
locklessly.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Currently the HV KVM code uses kvm->lock in conjunction with a flag,
kvm->arch.mmu_ready, to synchronize MMU setup and hold off vcpu
execution until the MMU-related data structures are ready. However,
this means that kvm->lock is being taken inside vcpu->mutex, which
is contrary to Documentation/virtual/kvm/locking.txt and results in
lockdep warnings.
To fix this, we add a new mutex, kvm->arch.mmu_setup_lock, which nests
inside the vcpu mutexes, and is taken in the places where kvm->lock
was taken that are related to MMU setup.
Additionally we take the new mutex in the vcpu creation code at the
point where we are creating a new vcore, in order to provide mutual
exclusion with kvmppc_update_lpcr() and ensure that an update to
kvm->arch.lpcr doesn't get missed, which could otherwise lead to a
stale vcore->lpcr value.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This merges in the ppc-kvm topic branch from the powerpc tree to get
patches which touch both general powerpc code and KVM code, one of
which is a prerequisite for following patches.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
On POWER9 and later processors where the host can schedule vcpus on a
per thread basis, there is a streamlined entry path used when the guest
is radix. This entry path saves/restores the fp and vr state in
kvmhv_p9_guest_entry() by calling store_[fp/vr]_state() and
load_[fp/vr]_state(). This is the same as the old entry path however the
old entry path also saved/restored the VRSAVE register, which isn't done
in the new entry path.
This means that the vrsave register is now volatile across guest exit,
which is an incorrect change in behaviour.
Fix this by saving/restoring the vrsave register in kvmhv_p9_guest_entry().
This restores the old, correct, behaviour.
Fixes: 95a6432ce9038 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
When running on POWER9 with kvm_hv.indep_threads_mode = N and the host
in SMT1 mode, KVM will run guest VCPUs on offline secondary threads.
If those guests are in radix mode, we fail to load the LPID and flush
the TLB if necessary, leading to the guest crashing with an
unsupported MMU fault. This arises from commit 9a4506e11b97 ("KVM:
PPC: Book3S HV: Make radix handle process scoped LPID flush in C,
with relocation on", 2018-05-17), which didn't consider the case
where indep_threads_mode = N.
For simplicity, this makes the real-mode guest entry path flush the
TLB in the same place for both radix and hash guests, as we did before
9a4506e11b97, though the code is now C code rather than assembly code.
We also have the radix TLB flush open-coded rather than calling
radix__local_flush_tlb_lpid_guest(), because the TLB flush can be
called in real mode, and in real mode we don't want to invoke the
tracepoint code.
Fixes: 9a4506e11b97 ("KVM: PPC: Book3S HV: Make radix handle process scoped LPID flush in C, with relocation on")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
I made the same typo when trying to grep for uses of smp_wmb and figured
I might as well fix it.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The trace_hardirqs_on() sets current->hardirqs_enabled and from here
the lockdep assumes interrupts are enabled although they are remain
disabled until the context switches to the guest. Consequent
srcu_read_lock() checks the flags in rcu_lock_acquire(), observes
disabled interrupts and prints a warning (see below).
This moves trace_hardirqs_on/off closer to __kvmppc_vcore_entry to
prevent lockdep from being confused.
DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
WARNING: CPU: 16 PID: 8038 at kernel/locking/lockdep.c:4128 check_flags.part.25+0x224/0x280
[...]
NIP [c000000000185b84] check_flags.part.25+0x224/0x280
LR [c000000000185b80] check_flags.part.25+0x220/0x280
Call Trace:
[c000003fec253710] [c000000000185b80] check_flags.part.25+0x220/0x280 (unreliable)
[c000003fec253780] [c000000000187ea4] lock_acquire+0x94/0x260
[c000003fec253840] [c00800001a1e9768] kvmppc_run_core+0xa60/0x1ab0 [kvm_hv]
[c000003fec253a10] [c00800001a1ed944] kvmppc_vcpu_run_hv+0x73c/0xec0 [kvm_hv]
[c000003fec253ae0] [c00800001a1095dc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000003fec253b00] [c00800001a1056bc] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[c000003fec253b90] [c00800001a0f3618] kvm_vcpu_ioctl+0x460/0x850 [kvm]
[c000003fec253d00] [c00000000041c4f4] do_vfs_ioctl+0xe4/0x930
[c000003fec253db0] [c00000000041ce04] ksys_ioctl+0xc4/0x110
[c000003fec253e00] [c00000000041ce78] sys_ioctl+0x28/0x80
[c000003fec253e20] [c00000000000b5a4] system_call+0x5c/0x70
Instruction dump:
419e0034 3d220004 39291730 81290000 2f890000 409e0020 3c82ffc6 3c62ffc5
3884be70 386329c0 4bf6ea71 60000000 <0fe00000> 3c62ffc6 3863be90 4801273d
irq event stamp: 1025
hardirqs last enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>] (null)
---[ end trace 31180adcc848993e ]---
possible reason: unannotated irqs-off.
irq event stamp: 1025
hardirqs last enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>] (null)
Fixes: 8b24e69fc47e ("KVM: PPC: Book3S HV: Close race with testing for signals on guest entry", 2017-06-26)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Implement a virtual mode handler for the H_CALL H_PAGE_INIT which can be
used to zero or copy a guest page. The page is defined to be 4k and must
be 4k aligned.
The in-kernel handler halves the time to handle this H_CALL compared to
handling it in userspace for a radix guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This adds a flag so that the DAWR can be enabled on P9 via:
echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous
The DAWR was previously force disabled on POWER9 in:
9654153158 powerpc: Disable DAWR in the base POWER9 CPU features
Also see Documentation/powerpc/DAWR-POWER9.txt
This is a dangerous setting, USE AT YOUR OWN RISK.
Some users may not care about a bad user crashing their box
(ie. single user/desktop systems) and really want the DAWR. This
allows them to force enable DAWR.
This flag can also be used to disable DAWR access. Once this is
cleared, all DAWR access should be cleared immediately and your
machine once again safe from crashing.
Userspace may get confused by toggling this. If DAWR is force
enabled/disabled between getting the number of breakpoints (via
PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an
inconsistent view of what's available. Similarly for guests.
For the DAWR to be enabled in a KVM guest, the DAWR needs to be force
enabled in the host AND the guest. For this reason, this won't work on
POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the
dawr_enable_dangerous file will fail if the hypervisor doesn't support
writing the DAWR.
To double check the DAWR is working, run this kernel selftest:
tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
Any errors/failures/skips mean something is wrong.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There is a hardware bug in some POWER9 processors where a treclaim in
fake suspend mode can cause an inconsistency in the XER[SO] bit across
the threads of a core, the workaround being to force the core into SMT4
when doing the treclaim.
The FAKE_SUSPEND bit (bit 10) in the PSSCR is used to control whether a
thread is in fake suspend or real suspend. The important difference here
being that thread reconfiguration is blocked in real suspend but not
fake suspend mode.
When we exit a guest which was in fake suspend mode, we force the core
into SMT4 while we do the treclaim in kvmppc_save_tm_hv().
However on the new exit path introduced with the function
kvmhv_run_single_vcpu() we restore the host PSSCR before calling
kvmppc_save_tm_hv() which means that if we were in fake suspend mode we
put the thread into real suspend mode when we clear the
PSSCR[FAKE_SUSPEND] bit. This means that we block thread reconfiguration
and the thread which is trying to get the core into SMT4 before it can
do the treclaim spins forever since it itself is blocking thread
reconfiguration. The result is that that core is essentially lost.
This results in a trace such as:
[ 93.512904] CPU: 7 PID: 13352 Comm: qemu-system-ppc Not tainted 5.0.0 #4
[ 93.512905] NIP: c000000000098a04 LR: c0000000000cc59c CTR: 0000000000000000
[ 93.512908] REGS: c000003fffd2bd70 TRAP: 0100 Not tainted (5.0.0)
[ 93.512908] MSR: 9000000302883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE,TM[SE]> CR: 22222444 XER: 00000000
[ 93.512914] CFAR: c000000000098a5c IRQMASK: 3
[ 93.512915] PACATMSCRATCH: 0000000000000001
[ 93.512916] GPR00: 0000000000000001 c000003f6cc1b830 c000000001033100 0000000000000004
[ 93.512928] GPR04: 0000000000000004 0000000000000002 0000000000000004 0000000000000007
[ 93.512930] GPR08: 0000000000000000 0000000000000004 0000000000000000 0000000000000004
[ 93.512932] GPR12: c000203fff7fc000 c000003fffff9500 0000000000000000 0000000000000000
[ 93.512935] GPR16: 2000000000300375 000000000000059f 0000000000000000 0000000000000000
[ 93.512951] GPR20: 0000000000000000 0000000000080053 004000000256f41f c000003f6aa88ef0
[ 93.512953] GPR24: c000003f6aa89100 0000000000000010 0000000000000000 0000000000000000
[ 93.512956] GPR28: c000003f9e9a0800 0000000000000000 0000000000000001 c000203fff7fc000
[ 93.512959] NIP [c000000000098a04] pnv_power9_force_smt4_catch+0x1b4/0x2c0
[ 93.512960] LR [c0000000000cc59c] kvmppc_save_tm_hv+0x40/0x88
[ 93.512960] Call Trace:
[ 93.512961] [c000003f6cc1b830] [0000000000080053] 0x80053 (unreliable)
[ 93.512965] [c000003f6cc1b8a0] [c00800001e9cb030] kvmhv_p9_guest_entry+0x508/0x6b0 [kvm_hv]
[ 93.512967] [c000003f6cc1b940] [c00800001e9cba44] kvmhv_run_single_vcpu+0x2dc/0xb90 [kvm_hv]
[ 93.512968] [c000003f6cc1ba10] [c00800001e9cc948] kvmppc_vcpu_run_hv+0x650/0xb90 [kvm_hv]
[ 93.512969] [c000003f6cc1bae0] [c00800001e8f620c] kvmppc_vcpu_run+0x34/0x48 [kvm]
[ 93.512971] [c000003f6cc1bb00] [c00800001e8f2d4c] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[ 93.512972] [c000003f6cc1bb90] [c00800001e8e3918] kvm_vcpu_ioctl+0x460/0x7d0 [kvm]
[ 93.512974] [c000003f6cc1bd00] [c0000000003ae2c0] do_vfs_ioctl+0xe0/0x8e0
[ 93.512975] [c000003f6cc1bdb0] [c0000000003aeb24] ksys_ioctl+0x64/0xe0
[ 93.512978] [c000003f6cc1be00] [c0000000003aebc8] sys_ioctl+0x28/0x80
[ 93.512981] [c000003f6cc1be20] [c00000000000b3a4] system_call+0x5c/0x70
[ 93.512983] Instruction dump:
[ 93.512986] 419dffbc e98c0000 2e8b0000 38000001 60000000 60000000 60000000 40950068
[ 93.512993] 392bffff 39400000 79290020 39290001 <7d2903a6> 60000000 60000000 7d235214
To fix this we preserve the PSSCR[FAKE_SUSPEND] bit until we call
kvmppc_save_tm_hv() which will mean the core can get into SMT4 and
perform the treclaim. Note kvmppc_save_tm_hv() clears the
PSSCR[FAKE_SUSPEND] bit again so there is no need to explicitly do that.
Fixes: 95a6432ce9038 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next
PPC KVM update for 5.1
There are no major new features this time, just a collection of bug
fixes and improvements in various areas, including machine check
handling and context switching of protection-key-related registers.
|
|
This merges in the "ppc-kvm" topic branch of the powerpc tree to get a
series of commits that touch both general arch/powerpc code and KVM
code. These commits will be merged both via the KVM tree and the
powerpc tree.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Currently trying to build without IOMMU support will fail:
(.text+0x1380): undefined reference to `kvmppc_h_get_tce'
(.text+0x1384): undefined reference to `kvmppc_rm_h_put_tce'
(.text+0x149c): undefined reference to `kvmppc_rm_h_stuff_tce'
(.text+0x14a0): undefined reference to `kvmppc_rm_h_put_tce_indirect'
This happens because turning off IOMMU support will prevent
book3s_64_vio_hv.c from being built because it is only built when
SPAPR_TCE_IOMMU is set, which depends on IOMMU support.
Fix it using ifdefs for the undefined references.
Fixes: 76d837a4c0f9 ("KVM: PPC: Book3S PR: Don't include SPAPR TCE code on non-pseries platforms")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This adds an "in_guest" parameter to machine_check_print_event_info()
so that we can avoid trying to translate guest NIP values into
symbolic form using the host kernel's symbol table.
Reviewed-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This makes the handling of machine check interrupts that occur inside
a guest simpler and more robust, with less done in assembler code and
in real mode.
Now, when a machine check occurs inside a guest, we always get the
machine check event struct and put a copy in the vcpu struct for the
vcpu where the machine check occurred. We no longer call
machine_check_queue_event() from kvmppc_realmode_mc_power7(), because
on POWER8, when a vcpu is running on an offline secondary thread and
we call machine_check_queue_event(), that calls irq_work_queue(),
which doesn't work because the CPU is offline, but instead triggers
the WARN_ON(lazy_irq_pending()) in pnv_smp_cpu_kill_self() (which
fires again and again because nothing clears the condition).
All that machine_check_queue_event() actually does is to cause the
event to be printed to the console. For a machine check occurring in
the guest, we now print the event in kvmppc_handle_exit_hv()
instead.
The assembly code at label machine_check_realmode now just calls C
code and then continues exiting the guest. We no longer either
synthesize a machine check for the guest in assembly code or return
to the guest without a machine check.
The code in kvmppc_handle_exit_hv() is extended to handle the case
where the guest is not FWNMI-capable. In that case we now always
synthesize a machine check interrupt for the guest. Previously, if
the host thinks it has recovered the machine check fully, it would
return to the guest without any notification that the machine check
had occurred. If the machine check was caused by some action of the
guest (such as creating duplicate SLB entries), it is much better to
tell the guest that it has caused a problem. Therefore we now always
generate a machine check interrupt for guests that are not
FWNMI-capable.
Reviewed-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
kvmhv_p9_guest_entry() implements a fast-path guest entry for Power9
when guest and host are both running with the Radix MMU.
Currently in that path we don't save the host AMR (Authority Mask
Register) value, and we always restore 0 on return to the host. That
is OK at the moment because the AMR is not used for storage keys with
the Radix MMU.
However we plan to start using the AMR on Radix to prevent the kernel
from reading/writing to userspace outside of copy_to/from_user(). In
order to make that work we need to save/restore the AMR value.
We only restore the value if it is different from the guest value,
which is already in the register when we exit to the host. This should
mean we rarely need to actually restore the value when running a
modern Linux as a guest, because it will be using the same value as
us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Russell Currey <ruscur@russell.cc>
|
|
grow_halt_poll_ns() have a strange behaviour in case
(vcpu->halt_poll_ns != 0) &&
(vcpu->halt_poll_ns < halt_poll_ns_grow_start).
In this case, vcpu->halt_poll_ns will be multiplied by grow factor
(halt_poll_ns_grow) which will require several grow iteration in order
to reach a value bigger than halt_poll_ns_grow_start.
This means that growing vcpu->halt_poll_ns from value of 0 is slower
than growing it from a positive value less than halt_poll_ns_grow_start.
Which is misleading and inaccurate.
Fix issue by changing grow_halt_poll_ns() to set vcpu->halt_poll_ns
to halt_poll_ns_grow_start in any case that
(vcpu->halt_poll_ns < halt_poll_ns_grow_start).
Regardless if vcpu->halt_poll_ns is 0.
use READ_ONCE to get a consistent number for all cases.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The hard-coded value 10000 in grow_halt_poll_ns() stands for the initial
start value when raising up vcpu->halt_poll_ns.
It actually sets the first timeout to the first polling session.
This value has significant effect on how tolerant we are to outliers.
On the standard case, higher value is better - we will spend more time
in the polling busyloop, handle events/interrupts faster and result
in better performance.
But on outliers it puts us in a busy loop that does nothing.
Even if the shrink factor is zero, we will still waste time on the first
iteration.
The optimal value changes between different workloads. It depends on
outliers rate and polling sessions length.
As this value has significant effect on the dynamic halt-polling
algorithm, it should be configurable and exposed.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
grow_halt_poll_ns() have a strange behavior in case
(halt_poll_ns_grow == 0) && (vcpu->halt_poll_ns != 0).
In this case, vcpu->halt_pol_ns will be set to zero.
That results in shrinking instead of growing.
Fix issue by changing grow_halt_poll_ns() to not modify
vcpu->halt_poll_ns in case halt_poll_ns_grow is zero
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Suggested-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, the KVM code assumes that if the host kernel is using the
XIVE interrupt controller (the new interrupt controller that first
appeared in POWER9 systems), then the in-kernel XICS emulation will
use the XIVE hardware to deliver interrupts to the guest. However,
this only works when the host is running in hypervisor mode and has
full access to all of the XIVE functionality. It doesn't work in any
nested virtualization scenario, either with PR KVM or nested-HV KVM,
because the XICS-on-XIVE code calls directly into the native-XIVE
routines, which are not initialized and cannot function correctly
because they use OPAL calls, and OPAL is not available in a guest.
This means that using the in-kernel XICS emulation in a nested
hypervisor that is using XIVE as its interrupt controller will cause a
(nested) host kernel crash. To fix this, we change most of the places
where the current code calls xive_enabled() to select between the
XICS-on-XIVE emulation and the plain XICS emulation to call a new
function, xics_on_xive(), which returns false in a guest.
However, there is a further twist. The plain XICS emulation has some
functions which are used in real mode and access the underlying XICS
controller (the interrupt controller of the host) directly. In the
case of a nested hypervisor, this means doing XICS hypercalls
directly. When the nested host is using XIVE as its interrupt
controller, these hypercalls will fail. Therefore this also adds
checks in the places where the XICS emulation wants to access the
underlying interrupt controller directly, and if that is XIVE, makes
the code use the virtual mode fallback paths, which call generic
kernel infrastructure rather than doing direct XICS access.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Replace kmalloc_node and memset with kzalloc_node
Signed-off-by: wangbo <wang.bo116@zte.com.cn>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
quadrants 1 & 2
A guest cannot access quadrants 1 or 2 as this would result in an
exception. Thus introduce the hcall H_COPY_TOFROM_GUEST to be used by a
guest when it wants to perform an access to quadrants 1 or 2, for
example when it wants to access memory for one of its nested guests.
Also provide an implementation for the kvm-hv module.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Allow for a device which is being emulated at L0 (the host) for an L1
guest to be passed through to a nested (L2) guest.
The existing kvmppc_hv_emulate_mmio function can be used here. The main
challenge is that for a load the result must be stored into the L2 gpr,
not an L1 gpr as would normally be the case after going out to qemu to
complete the operation. This presents a challenge as at this point the
L2 gpr state has been written back into L1 memory.
To work around this we store the address in L1 memory of the L2 gpr
where the result of the load is to be stored and use the new io_gpr
value KVM_MMIO_REG_NESTED_GPR to indicate that this is a nested load for
which completion must be done when returning back into the kernel. Then
in kvmppc_complete_mmio_load() the resultant value is written into L1
memory at the location of the indicated L2 gpr.
Note that we don't currently let an L1 guest emulate a device for an L2
guest which is then passed through to an L3 guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The kvmppc_ops struct is used to store function pointers to kvm
implementation specific functions.
Introduce two new functions load_from_eaddr and store_to_eaddr to be
used to load from and store to a guest effective address respectively.
Also implement these for the kvm-hv module. If we are using the radix
mmu then we can call the functions to access quadrant 1 and 2.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This adds code to flush the partition-scoped page tables for a radix
guest when dirty tracking is turned on or off for a memslot. Only the
guest real addresses covered by the memslot are flushed. The reason
for this is to get rid of any 2M PTEs in the partition-scoped page
tables that correspond to host transparent huge pages, so that page
dirtiness is tracked at a system page (4k or 64k) granularity rather
than a 2M granularity. The page tables are also flushed when turning
dirty tracking off so that the memslot's address space can be
repopulated with THPs if possible.
To do this, we add a new function kvmppc_radix_flush_memslot(). Since
this does what's needed for kvmppc_core_flush_memslot_hv() on a radix
guest, we now make kvmppc_core_flush_memslot_hv() call the new
kvmppc_radix_flush_memslot() rather than calling kvm_unmap_radix()
for each page in the memslot. This has the effect of fixing a bug in
that kvmppc_core_flush_memslot_hv() was previously calling
kvm_unmap_radix() without holding the kvm->mmu_lock spinlock, which
is required to be held.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Currently, kvm_arch_commit_memory_region() gets called with a
parameter indicating what type of change is being made to the memslot,
but it doesn't pass it down to the platform-specific memslot commit
functions. This adds the `change' parameter to the lower-level
functions so that they can use it in future.
[paulus@ozlabs.org - fix book E also.]
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Testing has revealed an occasional crash which appears to be caused
by a race between kvmppc_switch_mmu_to_hpt and kvm_unmap_hva_range_hv.
The symptom is a NULL pointer dereference in __find_linux_pte() called
from kvm_unmap_radix() with kvm->arch.pgtable == NULL.
Looking at kvmppc_switch_mmu_to_hpt(), it does indeed clear
kvm->arch.pgtable (via kvmppc_free_radix()) before setting
kvm->arch.radix to NULL, and there is nothing to prevent
kvm_unmap_hva_range_hv() or the other MMU callback functions from
being called concurrently with kvmppc_switch_mmu_to_hpt() or
kvmppc_switch_mmu_to_radix().
This patch therefore adds calls to spin_lock/unlock on the kvm->mmu_lock
around the assignments to kvm->arch.radix, and makes sure that the
partition-scoped radix tree or HPT is only freed after changing
kvm->arch.radix.
This also takes the kvm->mmu_lock in kvmppc_rmap_reset() to make sure
that the clearing of each rmap array (one per memslot) doesn't happen
concurrently with use of the array in the kvm_unmap_hva_range_hv()
or the other MMU callbacks.
Fixes: 18c3640cefc7 ("KVM: PPC: Book3S HV: Add infrastructure for running HPT guests on radix host")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
While running a nested guest VCPU on L0 via H_ENTER_NESTED hcall, a
pending signal in the L0 QEMU process can generate the following
sequence:
ret0 = kvmppc_pseries_do_hcall()
ret1 = kvmhv_enter_nested_guest()
ret2 = kvmhv_run_single_vcpu()
if (ret2 == -EINTR)
return H_INTERRUPT
if (ret1 == H_INTERRUPT)
kvmppc_set_gpr(vcpu, 3, 0)
return -EINTR
/* skipped: */
kvmppc_set_gpr(vcpu, 3, ret)
vcpu->arch.hcall_needed = 0
return RESUME_GUEST
which causes an exit to L0 userspace with ret0 == -EINTR.
The intention seems to be to set the hcall return value to 0 (via
VCPU r3) so that L1 will see a successful return from H_ENTER_NESTED
once we resume executing the VCPU. However, because we don't set
vcpu->arch.hcall_needed = 0, we do the following once userspace
resumes execution via kvm_arch_vcpu_ioctl_run():
...
} else if (vcpu->arch.hcall_needed) {
int i
kvmppc_set_gpr(vcpu, 3, run->papr_hcall.ret);
for (i = 0; i < 9; ++i)
kvmppc_set_gpr(vcpu, 4 + i, run->papr_hcall.args[i]);
vcpu->arch.hcall_needed = 0;
since vcpu->arch.hcall_needed == 1 indicates that userspace should
have handled the hcall and stored the return value in
run->papr_hcall.ret. Since that's not the case here, we can get an
unexpected value in VCPU r3, which can result in
kvmhv_p9_guest_entry() reporting an unexpected trap value when it
returns from H_ENTER_NESTED, causing the following register dump to
console via subsequent call to kvmppc_handle_exit_hv() in L1:
[ 350.612854] vcpu 00000000f9564cf8 (0):
[ 350.612915] pc = c00000000013eb98 msr = 8000000000009033 trap = 1
[ 350.613020] r 0 = c0000000004b9044 r16 = 0000000000000000
[ 350.613075] r 1 = c00000007cffba30 r17 = 0000000000000000
[ 350.613120] r 2 = c00000000178c100 r18 = 00007fffc24f3b50
[ 350.613166] r 3 = c00000007ef52480 r19 = 00007fffc24fff58
[ 350.613212] r 4 = 0000000000000000 r20 = 00000a1e96ece9d0
[ 350.613253] r 5 = 70616d00746f6f72 r21 = 00000a1ea117c9b0
[ 350.613295] r 6 = 0000000000000020 r22 = 00000a1ea1184360
[ 350.613338] r 7 = c0000000783be440 r23 = 0000000000000003
[ 350.613380] r 8 = fffffffffffffffc r24 = 00000a1e96e9e124
[ 350.613423] r 9 = c00000007ef52490 r25 = 00000000000007ff
[ 350.613469] r10 = 0000000000000004 r26 = c00000007eb2f7a0
[ 350.613513] r11 = b0616d0009eccdb2 r27 = c00000007cffbb10
[ 350.613556] r12 = c0000000004b9000 r28 = c00000007d83a2c0
[ 350.613597] r13 = c000000001b00000 r29 = c0000000783cdf68
[ 350.613639] r14 = 0000000000000000 r30 = 0000000000000000
[ 350.613681] r15 = 0000000000000000 r31 = c00000007cffbbf0
[ 350.613723] ctr = c0000000004b9000 lr = c0000000004b9044
[ 350.613765] srr0 = 0000772f954dd48c srr1 = 800000000280f033
[ 350.613808] sprg0 = 0000000000000000 sprg1 = c000000001b00000
[ 350.613859] sprg2 = 0000772f9565a280 sprg3 = 0000000000000000
[ 350.613911] cr = 88002848 xer = 0000000020040000 dsisr = 42000000
[ 350.613962] dar = 0000772f95390000
[ 350.614031] fault dar = c000000244b278c0 dsisr = 00000000
[ 350.614073] SLB (0 entries):
[ 350.614157] lpcr = 0040000003d40413 sdr1 = 0000000000000000 last_inst = ffffffff
[ 350.614252] trap=0x1 | pc=0xc00000000013eb98 | msr=0x8000000000009033
followed by L1's QEMU reporting the following before stopping execution
of the nested guest:
KVM: unknown exit, hardware reason 1
NIP c00000000013eb98 LR c0000000004b9044 CTR c0000000004b9000 XER 0000000020040000 CPU#0
MSR 8000000000009033 HID0 0000000000000000 HF 8000000000000000 iidx 3 didx 3
TB 00000000 00000000 DECR 00000000
GPR00 c0000000004b9044 c00000007cffba30 c00000000178c100 c00000007ef52480
GPR04 0000000000000000 70616d00746f6f72 0000000000000020 c0000000783be440
GPR08 fffffffffffffffc c00000007ef52490 0000000000000004 b0616d0009eccdb2
GPR12 c0000000004b9000 c000000001b00000 0000000000000000 0000000000000000
GPR16 0000000000000000 0000000000000000 00007fffc24f3b50 00007fffc24fff58
GPR20 00000a1e96ece9d0 00000a1ea117c9b0 00000a1ea1184360 0000000000000003
GPR24 00000a1e96e9e124 00000000000007ff c00000007eb2f7a0 c00000007cffbb10
GPR28 c00000007d83a2c0 c0000000783cdf68 0000000000000000 c00000007cffbbf0
CR 88002848 [ L L - - E L G L ] RES ffffffffffffffff
SRR0 0000772f954dd48c SRR1 800000000280f033 PVR 00000000004e1202 VRSAVE 0000000000000000
SPRG0 0000000000000000 SPRG1 c000000001b00000 SPRG2 0000772f9565a280 SPRG3 0000000000000000
SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000
HSRR0 0000000000000000 HSRR1 0000000000000000
CFAR 0000000000000000
LPCR 0000000003d40413
PTCR 0000000000000000 DAR 0000772f95390000 DSISR 0000000042000000
Fix this by setting vcpu->arch.hcall_needed = 0 to indicate completion
of H_ENTER_NESTED before we exit to L0 userspace.
Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: linuxppc-dev@ozlabs.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some things that I missed due to travel, or that came in late.
Two fixes also going to stable:
- A revert of a buggy change to the 8xx TLB miss handlers.
- Our flushing of SPE (Signal Processing Engine) registers on fork
was broken.
Other changes:
- A change to the KVM decrementer emulation to use proper APIs.
- Some cleanups to the way we do code patching in the 8xx code.
- Expose the maximum possible memory for the system in
/proc/powerpc/lparcfg.
- Merge some updates from Scott: "a couple device tree updates, and a
fix for a missing prototype warning"
A few other minor fixes and a handful of fixes for our selftests.
Thanks to: Aravinda Prasad, Breno Leitao, Camelia Groza, Christophe
Leroy, Felipe Rechia, Joel Stanley, Naveen N. Rao, Paul Mackerras,
Scott Wood, Tyrel Datwyler"
* tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
selftests/powerpc: Fix compilation issue due to asm label
selftests/powerpc/cache_shape: Fix out-of-tree build
selftests/powerpc/switch_endian: Fix out-of-tree build
selftests/powerpc/pmu: Link ebb tests with -no-pie
selftests/powerpc/signal: Fix out-of-tree build
selftests/powerpc/ptrace: Fix out-of-tree build
powerpc/xmon: Relax frame size for clang
selftests: powerpc: Fix warning for security subdir
selftests/powerpc: Relax L1d miss targets for rfi_flush test
powerpc/process: Fix flush_all_to_thread for SPE
powerpc/pseries: add missing cpumask.h include file
selftests/powerpc: Fix ptrace tm failure
KVM: PPC: Use exported tb_to_ns() function in decrementer emulation
powerpc/pseries: Export maximum memory value
powerpc/8xx: Use patch_site for perf counters setup
powerpc/8xx: Use patch_site for memory setup patching
powerpc/code-patching: Add a helper to get the address of a patch_site
Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
powerpc/8xx: add missing header in 8xx_mmu.c
powerpc/8xx: Add DT node for using the SEC engine of the MPC885
...
|
|
This changes the KVM code that emulates the decrementer function to do
the conversion of decrementer values to time intervals in nanoseconds
by calling the tb_to_ns() function exported by the powerpc timer code,
in preference to open-coded arithmetic using values from the
decrementer_clockevent struct. Similarly, the HV-KVM code that did
the same conversion using arithmetic on tb_ticks_per_sec also now
uses tb_to_ns().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This disables the use of the streamlined entry path for radix guests
on early POWER9 chips that need the workaround added in commit
a25bd72badfa ("powerpc/mm/radix: Workaround prefetch issue with KVM",
2017-07-24), because the streamlined entry path does not include
that workaround. This also means that we can't do nested HV-KVM
on those chips.
Since the chips that need that workaround are the same ones that can't
run both radix and HPT guests at the same time on different threads of
a core, we use the existing 'no_mixing_hpt_and_radix' variable that
identifies those chips to identify when we can't use the new guest
entry path, and when we can't do nested virtualization.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This adds a KVM_PPC_NO_HASH flag to the flags field of the
kvm_ppc_smmu_info struct, and arranges for it to be set when
running as a nested hypervisor, as an unambiguous indication
to userspace that HPT guests are not supported. Reporting the
KVM_CAP_PPC_MMU_HASH_V3 capability as false could be taken as
indicating only that the new HPT features in ISA V3.0 are not
supported, leaving it ambiguous whether pre-V3.0 HPT features
are supported.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
With this, userspace can enable a KVM-HV guest to run nested guests
under it.
The administrator can control whether any nested guests can be run;
setting the "nested" module parameter to false prevents any guests
becoming nested hypervisors (that is, any attempt to enable the nested
capability on a guest will fail). Guests which are already nested
hypervisors will continue to be so.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This merges in the "ppc-kvm" topic branch of the powerpc tree to get a
series of commits that touch both general arch/powerpc code and KVM
code. These commits will be merged both via the KVM tree and the
powerpc tree.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
With this, the KVM-HV module can be loaded in a guest running under
KVM-HV, and if the hypervisor supports nested virtualization, this
guest can now act as a nested hypervisor and run nested guests.
This also adds some checks to inform userspace that HPT guests are not
supported by nested hypervisors (by returning false for the
KVM_CAP_PPC_MMU_HASH_V3 capability), and to prevent userspace from
configuring a guest to use HPT mode.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This adds a one-reg register identifier which can be used to read and
set the virtual PTCR for the guest. This register identifies the
address and size of the virtual partition table for the guest, which
contains information about the nested guests under this guest.
Migrating this value is the only extra requirement for migrating a
guest which has nested guests (assuming of course that the destination
host supports nested virtualization in the kvm-hv module).
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
