| Age | Commit message (Collapse) | Author |
|---|
|
Add DTS files in support of EcoNet platform, including SmartFiber XP8421-B,
a low cost commercially available board based on EN751221.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add platform support for EcoNet MIPS SoCs.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
mmc-controller binding
Rename the sdhci nodename from "sdhci@" to "mmc@" to align with
linux common mmc-controller binding.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When CONFIG_HOTPLUG_PARALLEL is enabled, the code executing before
cpuhp_ap_sync_alive() is executed in parallel, while after it is
serialized. The functions set_cpu_sibling_map() and set_cpu_core_map()
were not designed to be executed in parallel, so by moving the
cpuhp_ap_sync_alive() before cpuhp_ap_sync_alive(), we then ensure
they will be called serialized.
The measurement done on EyeQ5 did not show any relevant boot time
increase after applying this patch.
Fixes: 76c43eb507bc ("MIPS: SMP: Implement parallel CPU bring up for EyeQ")
Reported-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-26-jirislaby@kernel.org
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc7).
Conflicts:
tools/testing/selftests/drivers/net/hw/ncdevmem.c
97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au
Adjacent changes:
net/core/devmem.c
net/core/devmem.h
0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload")
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no reason for people configuring the kernel to be asked about
CRYPTO_MANAGER, so make it a hidden symbol.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
tcrypt is actually a benchmarking module and not the actual tests. This
regularly causes confusion. Update the kconfig option name and help
text accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add explicit array bounds to the function prototypes for the parameters
that didn't already get handled by the conversion to use chacha_state:
- chacha_block_*():
Change 'u8 *out' or 'u8 *stream' to u8 out[CHACHA_BLOCK_SIZE].
- hchacha_block_*():
Change 'u32 *out' or 'u32 *stream' to u32 out[HCHACHA_OUT_WORDS].
- chacha_init():
Change 'const u32 *key' to 'const u32 key[CHACHA_KEY_WORDS]'.
Change 'const u8 *iv' to 'const u8 iv[CHACHA_IV_SIZE]'.
No functional changes. This just makes it clear when fixed-size arrays
are expected.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit 61444cde9170 ("ARM:
8591/1: mm: use fully constructed struct pages for EFI pgd allocations"),
they also are for special page tables like efi_mm. The one case where
split locks are definitely unused is pgtables owned by init_mm; this is
consistent with the behaviour of apply_to_pte_range().
The approach chosen in this series is therefore to pass the mm associated
to the pgtables being constructed to pagetable_{pte,pmd}_ctor() (patch 1),
and skip ptlock_init() if mm == &init_mm (patch 3 and 7). This makes it
possible to call the PTE ctor/dtor from pte_{alloc,free}_kernel() without
unintended consequences (patch 3). As a result the accounting functions
are now called at all levels for kernel pgtables, and split locks are
never initialised.
In configurations where ptlocks are dynamically allocated (32-bit,
PREEMPT_RT, etc.) and ARCH_ENABLE_SPLIT_PMD_PTLOCK is selected, this
series results in the removal of a kmem_cache allocation for every kernel
PMD. Additionally, for certain architectures that do not use
<asm-generic/pgalloc.h> such as s390, the same optimisation occurs at the
PTE level.
===
Things get more complicated when it comes to special pgtable allocators
(patch 8-12). All architectures need such allocators to create initial
kernel pgtables; we are not concerned with those as the ctor cannot be
called so early in the boot sequence. However, those allocators may also
be used later in the boot sequence or during normal operations. There are
two main use-cases:
1. Mapping EFI memory: efi_mm (arm, arm64, riscv)
2. arch_add_memory(): init_mm
The ctor is already explicitly run (at the PTE/PMD level) in the first
case, as required for pgtables that are not associated with init_mm.
However the same allocators may also be used for the second use-case (or
others), and this is where it gets messy. Patch 1 calls the ctor with
NULL as mm in those situations, as the actual mm isn't available.
Practically this means that ptlocks will be unconditionally initialised.
This is fine on arm - create_mapping_late() is only used for the EFI
mapping. On arm64, __create_pgd_mapping() is also used by
arch_add_memory(); patch 8/9/11 ensure that ctors are called at all levels
with the appropriate mm. The situation is similar on riscv, but
propagating the mm down to the ctor would require significant refactoring.
Since they are already called unconditionally, this series leaves riscv
no worse off - patch 10 adds comments to clarify the situation.
From a cursory look at other architectures implementing arch_add_memory(),
s390 and x86 may also need a similar treatment to add constructor calls.
This is to be taken care of in a future version or as a follow-up.
===
The complications in those special pgtable allocators beg the question:
does it really make sense to treat efi_mm and init_mm differently in e.g.
apply_to_pte_range()? Maybe what we really need is a way to tell if an mm
corresponds to user memory or not, and never use split locks for non-user
mm's. Feedback and suggestions welcome!
This patch (of 12):
In preparation for calling constructors for all kernel page tables while
eliding unnecessary ptlock initialisation, let's pass down the associated
mm to the PTE/PMD level ctors. (These are the two levels where ptlocks
are used.)
In most cases the mm is already around at the point of calling the ctor so
we simply pass it down. This is however not the case for special page
table allocators:
* arch/arm/mm/mmu.c
* arch/arm64/mm/mmu.c
* arch/riscv/mm/init.c
In those cases, the page tables being allocated are either for standard
kernel memory (init_mm) or special page directories, which may not be
associated to any mm. For now let's pass NULL as mm; this will be refined
where possible in future patches.
No functional change in this patch.
Link: https://lore.kernel.org/linux-mm/20250103184415.2744423-1-kevin.brodsky@arm.com/ [1]
Link: https://lore.kernel.org/linux-hardening/20250203101839.1223008-1-kevin.brodsky@arm.com/ [2]
Link: https://lkml.kernel.org/r/20250408095222.860601-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20250408095222.860601-2-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: <x86@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to syscall_set_arguments() that complements
syscall_get_arguments(), introduce syscall_set_nr() that complements
syscall_get_nr().
syscall_set_nr() is going to be needed along with syscall_set_arguments()
on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit 7962c2eddbfe ("arch: remove unused function
syscall_set_arguments()") by reusing some of old syscall_set_arguments()
implementations.
[nathan@kernel.org: fix compile time fortify checks]
Link: https://lkml.kernel.org/r/20250408213131.GA2872426@ax162
Link: https://lkml.kernel.org/r/20250303112009.GC24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> [mips]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures simply call pfn_pte(). Centralise that as the normal
definition and remove the definition of mk_pte() from the architectures
which have either that exact definition or something similar.
Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
|
|
Make the architecture-optimized CRC code do its CPU feature checks in
subsys_initcalls instead of arch_initcalls. This makes it consistent
with arch/*/lib/crypto/ and ensures that it runs after initcalls that
possibly could be a prerequisite for kernel-mode FPU, such as x86's
xfd_update_static_branch() and loongarch's init_euen_mask().
Note: as far as I can tell, x86's xfd_update_static_branch() isn't
*actually* needed for kernel-mode FPU. loongarch's init_euen_mask() is
needed to enable save/restore of the vector registers, but loongarch
doesn't yet have any CRC or crypto code that uses vector registers
anyway. Regardless, let's be consistent with arch/*/lib/crypto/ and
robust against any potential future dependency on an arch_initcall.
Link: https://lore.kernel.org/r/20250510035959.87995-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The block layer bounce buffering support is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Export the block functions as GPL only, there is no reason
to let arbitrary modules use these internal functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that every architecture provides a block function, use that
to implement the lib/poly1305 and remove the old per-arch code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add block-only interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge mainline to pick up bcachefs poly1305 patch 4bf4b5046de0
("bcachefs: use library APIs for ChaCha20 and Poly1305"). This
is a prerequisite for removing the poly1305 shash algorithm.
|
|
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506eb ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
All of the CRC library's CPU feature static_keys are initialized by
initcalls and never change afterwards, so there's no need for them to be
in the regular .data section. Put them in .data..ro_after_init instead.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250413154350.10819-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that the architecture-optimized Poly1305 kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to
the generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the architecture-optimized ChaCha kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the
generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the mips ChaCha and Poly1305 library
functions into a new directory arch/mips/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Check the return values of kcalloc() and exit early to avoid potential
NULL pointer dereferences.
Compile-tested only.
Cc: stable@vger.kernel.org
Fixes: 75fa6a583882e ("MIPS: CPS: Introduce struct cluster_boot_config")
Fixes: 0856c143e1cd3 ("MIPS: CPS: Boot CPUs in secondary clusters")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Recently the rollback region has been changed into an
idle interrupt region [1]. This patch make the appropriate
changes renaming functions and macro, to reflect the change.
[1] https://lore.kernel.org/linux-mips/20250403161143.361461-2-marco.crivellari@suse.com/
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix missing .cpuidle.text section assignment for r4k_wait() to correct
backtracing with nmi_backtrace().
Fixes: 97c8580e85cf ("MIPS: Annotate cpu_wait implementations with __cpuidle")
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
MIPS re-enables interrupts on its idle routine and performs
a TIF_NEED_RESCHED check afterwards before putting the CPU to sleep.
The IRQs firing between the check and the 'wait' instruction may set the
TIF_NEED_RESCHED flag. In order to deal with this possible race, IRQs
interrupting __r4k_wait() rollback their return address to the
beginning of __r4k_wait() so that TIF_NEED_RESCHED is checked
again before going back to sleep.
However idle IRQs can also queue timers that may require a tick
reprogramming through a new generic idle loop iteration but those timers
would go unnoticed here because __r4k_wait() only checks
TIF_NEED_RESCHED. It doesn't check for pending timers.
Fix this with fast-forwarding idle IRQs return address to the end of the
idle routine instead of the beginning, so that the generic idle loop
handles both TIF_NEED_RESCHED and pending timers.
CONFIG_CPU_MICROMIPS has been removed along with the nop instructions.
There, NOPs are 2 byte in size, so change the code with 3 _ssnop which are
always 4 byte and remove the ifdef. Added ehb to make sure the hazard
is always cleared.
Fixes: c65a5480ff29 ("[MIPS] Fix potential latency problem due to non-atomic cpu_wait.")
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
strcpy() is deprecated; use strscpy() instead.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
strcpy() is deprecated; use strscpy() instead.
Link: https://github.com/KSPP/linux/issues/88
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Use tabs instead of spaces in regs_query_register_offset() and
syscall_trace_leave(), and properly indent multiple getters.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Added support for starting CPUs in parallel on EyeQ to speed up boot time.
On EyeQ5, booting 8 CPUs is now ~90ms faster.
On EyeQ6, booting 32 CPUs is now ~650ms faster.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
GCC 15 changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, mips/vdso code uses
its own CFLAGS without a '-std=' value, which break with this dialect
change because of the kernel's own definitions of bool, false, and true
conflicting with the C23 reserved keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add -std as specified in KBUILD_CFLAGS to the decompressor and purgatory
CFLAGS to eliminate these errors and make the C standard version of these
areas match the rest of the kernel.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Similar to commit 98a9e2ac3755 ("MIPS: Loongson64: DTS: Fix msi node for ls7a").
Fix follow warnings:
arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts:28.31-36.4: Warning (interrupt_provider): /bus@10000000/msi-controller@2ff00000: Missing '#interrupt-cells' in interrupt provider
arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Fixes: 24af105962c8 ("MIPS: Loongson64: DeviceTree for LS7A PCH")
Tested-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add a device tree node for the MDIO controller on the RTL9300 chips.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the drivers to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Also switch to the generic export format.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
arch/mips/crypto/Kconfig is sourced only when CONFIG_MIPS is enabled, so
there is no need for options defined in that file to depend on it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Following the example of the crc32, crc32c, and chacha code, make the
crypto subsystem register both generic and architecture-optimized
poly1305 shash algorithms, both implemented on top of the appropriate
library functions. This eliminates the need for every architecture to
implement the same shash glue code.
Note that the poly1305 shash requires that the key be prepended to the
data, which differs from the library functions where the key is simply a
parameter to poly1305_init(). Previously this was handled at a fairly
low level, polluting the library code with shash-specific code.
Reorganize things so that the shash code handles this quirk itself.
Also, to register the architecture-optimized shashes only when
architecture-optimized code is actually being used, add a function
poly1305_is_arch_optimized() and make each arch implement it. Change
each architecture's Poly1305 module_init function to arch_initcall so
that the CPU feature detection is guaranteed to run before
poly1305_is_arch_optimized() gets called by crypto/poly1305.c. (In
cases where poly1305_is_arch_optimized() just returns true
unconditionally, using arch_initcall is not strictly needed, but it's
still good to be consistent across architectures.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
