| Age | Commit message (Collapse) | Author |
|---|
|
The original clock (3 MHz) is too fast for the clocksource,
there will be a chance that the system may get stuck.
Reported-by: Nikolaus Schaller <hns@goldelico.com>
Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add MAC syscon nodes for X1000 SoC and X1830 SoC from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N * X) cells.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
checkpatch looks for SPDX-License-Identifier.
So change the '_' to '-'
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The GMAC module is now supported, enable it.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The GMAC module is now supported, enable it.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a 1 MiB memory area dedicated to the video driver. This area will be
managed by Linux' CMA, so that the ingenic-drm driver can be sure to
always be able to allocate contiguous buffers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When using the FM radio, we must not have capacitors on the headphones
line, since it is used as the antenna.
The "FM Radio" widget is removed so that the cap-less mode can be
enabled dynamically through DAPM when the line input is used.
This widget was useless anyway.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The "ingenic,jz4780-i2c" should have "ingenic,jz4770-i2c" as a fallback
compatible, as per the Device Tree documentation found in
Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Allow specifying from the config the UART to use on Ingenic SoCs when
compressed kernel debugging is enabled.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following W=1 kernel build warning(s):
arch/mips/boot/dts/loongson/rs780e-pch.dtsi:24.7-41.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name
arch/mips/boot/dts/loongson/rs780e-pch.dtsi:24.7-41.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000"
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following W=1 kernel build warning(s):
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:410.7-415.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:410.7-415.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000"
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following W=1 kernel build warning(s):
arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts:91.7-96.5: Warning (unit_address_vs_reg): /bus@10000000/isa: node has a reg or ranges property, but no unit name
arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts:91.7-96.5: Warning (simple_bus_reg): /bus@10000000/isa: simple-bus unit address format error, expected "18000000"
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following W=1 kernel build warning(s):
arch/mips/boot/dts/loongson/loongson64g-package.dtsi:42.30-49.5: Warning (simple_bus_reg): /bus@1fe00000/serial@1fe001e0: simple-bus unit address format error, expected "1fe00100"
arch/mips/boot/dts/loongson/loongson64g-package.dtsi:51.30-59.5: Warning (simple_bus_reg): /bus@1fe00000/serial@1fe001e8: simple-bus unit address format error, expected "1fe00110"
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following W=1 kernel build warning(s):
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:26.9-32.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Both, MAC and switch support flow control, so add pause property for the
MAC <> switch link.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add SOM9331 based Board. It has 3 LAN ports, usb to uart controller and
USB type A port.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
make dtbs_check:
eth@1f010000: $nodename:0: 'eth@1f010000' does not match '^ethernet(@.*)?$'
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
from Loongson-2K user manual know that Loongson-2K have two
pcie controller pcie0 and pcie1, pcie0 have four port named port0~port3
and pcie1 have 2 port named port0~port1. the device id of port0 is 7a19
in each pcie controller and others are 7a09.
Signed-off-by: Xiaochuan Mao <maoxiaochuan@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
make license from GPL3.0 to GPL2.0
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
from Loongson-2K1000 user manual know that under pci bus
the device num is 4, function number is 2 and register is 0x2200
is ohci. the ohci interrupt number is 51. because Loongson-2K1000 has
64 interrupt sources, 0-31 correspond to the device tree liointc0 device
node, and the other correspond to liointc1 node. so it should be
number 19 correspon to liointc1.
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add hsspi-osc clock.
- Add watchdog.
- Add HS SPI controller
- Add NAND controller.
- Add USBH PHY.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add watchdog controller.
- Add SPI controller.
- Add NAND controller.
- Add USBH PHY controller.
- Add RNG controller.
- Add cfi-flash controller.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add hsspi-osc clock.
- Add watchdog.
- Add SPI controller.
- Add HS SPI controller.
- Add NAND controller.
- Add USBH PHY.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add watchdog.
- Add SPI controller.
- Add USBH PHY.
- Add cfi-flash.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add hsspi-osc clock.
- Add watchdog.
- Add HS SPI controller.
- Add NAND controller.
- Add USBH PHY.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit a23c4134955e added the clock controller nodes, incorrectly changing the
syscon-reboot nodes addresses.
Fixes: a23c4134955e ("MIPS: BMIPS: add clock controller nodes")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add DeviceTree files for Loongson-2K1000 processor, currently only
supports single-core boot.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Tested-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The NT39016 panel is a fun beast, even though the documentation states
that the CS line is active-low, it will work just fine if the CS line is
configured as active-high, but it won't work if the CS line is forced
low or forced high.
Since it did actually work with the spi-cs-high property, this is not a
bugfix, but we should nonetheless remove that property to match the
documentation.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there are proper device tree bindings we can start using them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Change /include/ with #include in order to be able to include header files
from dt-bindings.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since 5.12-rc1, the Device Tree blob must now be properly aligned.
Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.
This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.
Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Nintendo N64
- added support for Realtek RTL83XX SoCs
- kaslr support for Loongson64
- first steps to get rid of set_fs()
- DMA runtime coherent/non-coherent selection cleanup
- cleanups and fixes
* tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits)
Revert "MIPS: Add basic support for ptrace single step"
vmlinux.lds.h: catch more UBSAN symbols into .data
MIPS: kernel: Drop kgdb_call_nmi_hook
MAINTAINERS: Add git tree for KVM/mips
MIPS: Use common way to parse elfcorehdr
MIPS: Simplify EVA cache handling
Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"
MIPS: remove CONFIG_DMA_PERDEV_COHERENT
MIPS: remove CONFIG_DMA_MAYBE_COHERENT
driver core: lift dma_default_coherent into common code
MIPS: refactor the runtime coherent vs noncoherent DMA indicators
MIPS/alchemy: factor out the DMA coherent setup
MIPS/malta: simplify plat_setup_iocoherency
MIPS: Add basic support for ptrace single step
MAINTAINERS: replace non-matching patterns for loongson{2,3}
MIPS: Make check condition for SDBBP consistent with EJTAG spec
mips: Replace lkml.org links with lore
Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"
MIPS: crash_dump.c: Simplify copy_oldmem_page()
Revert "mips: Manually call fdt_init_reserved_mem() method"
...
|
|
Commit 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer
UBSAN") added a possibility to build the entire kernel with UBSAN
instrumentation for MIPS, with the exception for VDSO.
However, self-extracting head wasn't been added to exceptions, so
this occurs:
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
in function `FSE_buildDTable_wksp':
decompress.c:(.text.FSE_buildDTable_wksp+0x278): undefined reference
to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2a8):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2c4):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
decompress.c:(.text.FSE_buildDTable_raw+0x9c): more undefined references
to `__ubsan_handle_shift_out_of_bounds' follow
Add UBSAN_SANITIZE := n to mips/boot/compressed/Makefile to exclude
it from instrumentation scope and fix this issue.
Fixes: 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN")
Cc: stable@vger.kernel.org # 5.0+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The RTL838x/839x family of SoCs are Realtek switches with an embedded
MIPS core.
* RTL838x - 500MHz 4kce single core - 1Gbit ports and L2 features
* RTL839x - 700MHz 34Kc single core - 1Gbit ports and L2 features
These switches, depending on the exact part number, will have anywhere
between 8 and 52 ports. The MIPS core is wired to a switch cpu port which
has a tagging feature allowing us to make use of the DSA subsystem.
The SoCs are somewhat basic in certain areas, getting better with more
advanced features on newer series.
The switch functionality is MMIO-mapped via a large MFD region.
The SoCs have the following peripherals
* ethernet
* switch
* uart - ns16550a
* spi-flash interface
* gpio
* wdt
* led
The code was derived from various vendor SDKs based on Linux v2.6
kernels.
This patchset allows us to boot RTL838x/RTL839x units with basic support.
Most of the other drivers are already written and functional, and work to
get them upstream is already in progress.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 2ee1503e546f ("MIPS: zboot: head.S clean up").
After .noreorder removed, clear BSS fall into endless loop. The bne
instruction will add nop to the delay slot at compile time. So a0
register will not increment by 4. Fix it and clear BSS from _edata
to (_end - 1).
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
.cprestore is removed as we don't expect Position Independent
zboot ELF.
.noreorder is also removed and rest instructions are massaged
to improve readability.
t9 register is used for indirect jump as MIPS ABI requirement.
start label is removed as it already defined in LEAF.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The compressed payload is not necesarily 4-byte aligned, at least when
compiling with Clang. In that case, the 4-byte value appended to the
compressed payload that corresponds to the uncompressed kernel image
size must be read using get_unaligned_le32().
This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic
JZ4770 board).
Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Enable gcov profiling of the entire kernel on mips. Required changes
include disabling profiling for:
* arch/kernel/boot/compressed: not linked to main kernel.
Lightly tested on Loongson 3A3000 an 3A4000, seems to work as expected.
without "GCOV_PROFILE := n" in compressed Makefile,
build errors as follows:
...
ld: arch/mips/boot/compressed/string.o:(.data+0x88):
undefined reference to `__gcov_merge_add'
ld: arch/mips/boot/compressed/string.o:
in function `_GLOBAL__sub_I_00100_0_memcpy':
string.c:(.text.startup+0x4): undefined reference to `__gcov_init'
ld: arch/mips/boot/compressed/string.o:
in function `_GLOBAL__sub_D_00100_1_memcpy':
string.c:(.text.exit+0x0): undefined reference to `__gcov_exit'
...
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
BCM63268 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
BCM6368 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
BCM6362 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
