| Age | Commit message (Collapse) | Author |
|---|
|
LoongArch already supports two crashkernel regions in kexec-tools, so we
can directly use the common interface to support crashkernel=X,[high,low]
after commit 0ab97169aa0517079b ("crash_core: add generic function to do
reservation").
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, then define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX and CRASH_ADDR_HIGH_MAX and in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic();
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/loongarch/Kconfig.
One can reserve the crash kernel from high memory above DMA zone range
by explicitly passing "crashkernel=X,high"; or reserve a memory range
below 4G with "crashkernel=X,low". Besides, there are few rules need to
take notice:
1) "crashkernel=X,[high,low]" will be ignored if "crashkernel=size" is
specified.
2) "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed
and there is enough memory to be allocated under 4G.
3) When allocating crashkernel above 4G and no "crashkernel=X,low" is
specified, a 128M low memory will be allocated automatically for
swiotlb bounce buffer.
See Documentation/admin-guide/kernel-parameters.txt for more information.
Following test cases have been performed as expected:
1) crashkernel=256M //low=256M
2) crashkernel=1G //low=1G
3) crashkernel=4G //high=4G, low=128M(default)
4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored
5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored
6) crashkernel=4G,high //high=4G, low=128M(default)
7) crashkernel=256M,low //low=0M, invalid
8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M
9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid
10) crashkernel=512M@2560M //low=512M
11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M
Recommended usage in general:
1) In the case of small memory: crashkernel=512M
2) In the case of large memory: crashkernel=1024M,high crashkernel=128M,low
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There has been a lingering bug in LoongArch Linux systems causing some
GCC tests to intermittently fail (see Closes link). I've made a minimal
reproducer:
zsh% cat measure.s
.align 4
.globl _start
_start:
movfcsr2gr $a0, $fcsr0
bstrpick.w $a0, $a0, 16, 16
beqz $a0, .ok
break 0
.ok:
li.w $a7, 93
syscall 0
zsh% cc mesaure.s -o measure -nostdlib
zsh% echo $((1.0/3))
0.33333333333333331
zsh% while ./measure; do ; done
This while loop should not stop as POSIX is clear that execve must set
fenv to the default, where FCSR should be zero. But in fact it will
just stop after running for a while (normally less than 30 seconds).
Note that "$((1.0/3))" is needed to reproduce this issue because it
raises FE_INVALID and makes fcsr0 non-zero.
The problem is we are currently relying on SET_PERSONALITY2() to reset
current->thread.fpu.fcsr. But SET_PERSONALITY2() is executed before
start_thread which calls lose_fpu(0). We can see if kernel preempt is
enabled, we may switch to another thread after SET_PERSONALITY2() but
before lose_fpu(0). Then bad thing happens: during the thread switch
the value of the fcsr0 register is stored into current->thread.fpu.fcsr,
making it dirty again.
The issue can be fixed by setting current->thread.fpu.fcsr after
lose_fpu(0) because lose_fpu() clears TIF_USEDFPU, then the thread
switch won't touch current->thread.fpu.fcsr.
The only other architecture setting FCSR in SET_PERSONALITY2() is MIPS.
I've ran a similar test on MIPS with mainline kernel and it turns out
MIPS is buggy, too. Anyway MIPS do this for supporting different FP
flavors (NaN encodings, etc.) which do not exist on LoongArch. So for
LoongArch, we can simply remove the current->thread.fpu.fcsr setting
from SET_PERSONALITY2() and do it in start_thread(), after lose_fpu(0).
The while loop failing with the mainline kernel has survived one hour
after this change on LoongArch.
Fixes: 803b0fc5c3f2baa ("LoongArch: Add process management")
Closes: https://github.com/loongson-community/discussions/issues/7
Link: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now loongson_system_configuration::cores_io_master only covers 64 cpus,
if NR_CPUS > 64 there will be memory corruption. So let cores_io_master
cover the largest NR_CPUS (256).
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch has hardware page coloring for L1 Cache, so we don't have
cache aliases. But SFB (Store Fill Buffer) still has aliases. So we
define SHMLBA to SZ_64K previously. But there are losts of applications
use PAGE_SIZE rather than SHMLBA to mmap() file pages and shared pages.
Of course we can fix them one by one, but not easy.
On the other hand, we can simply disable SFB for 4KB page size to fix
cache alias (there will be performance decrease, but acceptable), and
in future we will fix SFB in hardware. So we can safely define SHMLBA to
PAGE_SIZE (use the generic shmparam.h) to make life easier.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
ESRT (EFI System Resource Table) is needed for UEFI's "Capsule Update"
feature. But ESRT initialization is missing on LoongArch now, so add a
call to efi_esrt_init() at the end of efi_init().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Generally, we can get cpu-related information, such as model name, from
/proc/cpuinfo. For FDT-based systems, we need to parse the relevant
information from DTS.
BTW, set loongson_sysconf.cores_per_package to num_processors if SMBIOS
doesn't provide a valid number (usually FDT-based systems).
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.
We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.
And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Fix a syzbot reported issue in efivarfs where concurrent accesses to
the file system resulted in list corruption
- Add support for accessing EFI variables via the TEE subsystem (and a
trusted application in the secure world) instead of via EFI runtime
firmware running in the OS's execution context
- Avoid linker tricks to discover the image base on LoongArch
* tag 'efi-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: memmap: fix kernel-doc warnings
efi/loongarch: Directly position the loaded image file
efivarfs: automatically update super block flag
efi: Add tee-based EFI variable driver
efi: Add EFI_ACCESS_DENIED status code
efi: expose efivar generic ops register function
efivarfs: Move efivarfs list into superblock s_fs_info
efivarfs: Free s_fs_info on unmount
efivarfs: Move efivar availability check into FS context init
efivarfs: force RO when remounting if SetVariable is not supported
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
loongarch's signal.c uses rseq_signal_deliver() so it should
pull in the appropriate header to prevent a build error:
../arch/loongarch/kernel/signal.c: In function 'handle_signal':
../arch/loongarch/kernel/signal.c:1034:9: error: implicit declaration of function 'rseq_signal_deliver' [-Werror=implicit-function-declaration]
1034 | rseq_signal_deliver(ksig, regs);
| ^~~~~~~~~~~~~~~~~~~
Fixes: b74baf4ad05b ("LoongArch: Add signal handling support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: loongarch@lists.linux.dev
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
The use of the 'kernel_offset' variable to position the image file that
has been loaded by UEFI or GRUB is unnecessary, because we can directly
position the loaded image file through using the image_base field of the
efi_loaded_image struct provided by UEFI.
Replace kernel_offset with image_base to position the image file that has
been loaded by UEFI or GRUB.
Signed-off-by: Wang Yao <wangyao@lemote.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This patch adds LASX (256bit SIMD) support for LoongArch KVM.
There will be LASX exception in KVM when guest use the LASX instructions.
KVM will enable LASX and restore the vector registers for guest and then
return to guest to continue running.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This patch adds LSX (128bit SIMD) support for LoongArch KVM.
There will be LSX exception in KVM when guest use the LSX instructions.
KVM will enable LSX and restore the vector registers for guest and then
return to guest to continue running.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6
issues"
* tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mglru: reclaim offlined memcgs harder
mm/mglru: respect min_ttl_ms with memcgs
mm/mglru: try to stop at high watermarks
mm/mglru: fix underprotected page cache
mm/shmem: fix race in shmem_undo_range w/THP
Revert "selftests: error out if kernel header files are not yet built"
crash_core: fix the check for whether crashkernel is from high memory
x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC
sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC
loongarch, kexec: change dependency of object files
mm/damon/core: make damon_start() waits until kdamond_fn() starts
selftests/mm: cow: print ksft header before printing anything else
mm: fix VMA heap bounds checking
riscv: fix VMALLOC_START definition
kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
|
|
Patch series "kexec: fix the incorrect ifdeffery and dependency of
CONFIG_KEXEC".
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
E.g on mips, below link error are seen:
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------
Here, change the incorrect dependency of building kexec_core related
object files, and the ifdeffery on architectures from CONFIG_KEXEC to
CONFIG_KEXEC_CORE.
Testing:
========
Passed on mips and loognarch with the LKP reproducer.
This patch (of 5):
Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o
relocate_kernel.o depends on CONFIG_KEXEC.
Whereas, since we will drop the select of KEXEC for CRASH_DUMP in
kernel/Kconfig.kexec, compiling error will be triggered if below config
items are set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
---------------------------------------------------------------
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209':
>> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287':
>> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown'
>> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5':
>> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown'
loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec'
---------------------------------------------------------------
Here, change the dependency of machine_kexec.o relocate_kernel.o to
CONFIG_KEXEC_CORE can fix above building error.
Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sanity check that makes sure the nodes cover all memory loops over
numa_meminfo to count the pages that have node id assigned by the
firmware, then loops again over memblock.memory to find the total amount
of memory and in the end checks that the difference between the total
memory and memory that covered by nodes is less than some threshold.
Worse, the loop over numa_meminfo calls __absent_pages_in_range() that
also partially traverses memblock.memory.
It's much simpler and more efficient to have a single traversal of
memblock.memory that verifies that amount of memory not covered by nodes
is less than a threshold.
Introduce memblock_validate_numa_coverage() that does exactly that and use
it instead of numa_meminfo_cover_memory().
Link: https://lkml.kernel.org/r/20231026020329.327329-1-zhiguangni01@gmail.com
Signed-off-by: Liam Ni <zhiguangni01@gmail.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feiyang Chen <chenfeiyang@loongson.cn>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During unwinding, unwind_done() is used as an end condition. Normally it
unwind to the user stack and then set the stack type to unknown, which
is a normal exit. When something unexpected happens in unwind process
and we cannot unwind anymore, we should set the error flag, and also set
the stack type to unknown to indicate that the unwind process can not
continue. The error flag emphasizes that the unwind process produce an
unexpected error. There is no unexpected things when we unwind the PT_REGS
in the top of IRQ stack and find out that is an user mode PT_REGS. Thus,
we should not set error flag and just set stack type to unknown.
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Convert loongarch to use the arch_cpu_is_hotpluggable() helper rather
than arch_register_cpu(). Also remove the export as nothing should be
using arch_register_cpu() outside of the core kernel/acpi code.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/E1r5R4B-00Ct0G-Kk@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
LoongArch provides its own arch_unregister_cpu(). This clears the
hotpluggable flag, then unregisters the CPU.
It isn't necessary to clear the hotpluggable flag when unregistering
a cpu. unregister_cpu() writes NULL to the percpu cpu_sys_devices
pointer, meaning cpu_is_hotpluggable() will return false, as
get_cpu_device() has returned NULL.
Remove arch_unregister_cpu() and use the __weak version.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/E1r5R46-00Ct0A-GJ@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that GENERIC_CPU_DEVICES calls arch_register_cpu(), which can be
overridden by the arch code, switch over to this to allow common code
to choose when the register_cpu() call is made.
This allows topology_init() to be removed.
This is an intermediate step to the logic being moved to drivers/acpi,
where GENERIC_CPU_DEVICES will do the work when booting with acpi=off.
This is a subtle change. Originally:
- on boot, topology_init() would have marked present CPUs that
io_master() is true for as hotplug-incapable.
- if a CPU is hotplugged that is an io_master(), it can later be
hot-unplugged.
The new behaviour is that any CPU that io_master() is true for will
now always be marked as hotplug-incapable, thus even if it was
hotplugged, it can no longer be hot-unplugged.
This patch also has the effect of moving the registration of CPUs from
subsys to driver core initialisation, prior to any initcalls running.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/E1r5R41-00Ct04-Bg@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
arch_register_cpu() and arch_unregister_cpu() are not used by anything
that can be a module - they are used by drivers/base/cpu.c and
drivers/acpi/acpi_processor.c, neither of which can be a module.
Remove the exports.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/E1r5R2w-00Csyn-E2@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When -Wmissing-prototypes is enabled, the some asm-offsets.c files fail
to build, even when this warning is disabled in the Makefile for normal
files:
arch/sparc/kernel/asm-offsets.c:22:5: error: no previous prototype for 'sparc32_foo' [-Werror=missing-prototypes]
arch/sparc/kernel/asm-offsets.c:48:5: error: no previous prototype for 'foo' [-Werror=missing-prototypes]
Address this by making use of the same trick as x86, marking these
functions as 'static __used' to avoid the need for a prototype
by not drop them in dead-code elimination.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/lkml/CAK7LNARfEmFk0Du4Hed19eX_G6tUC5wG0zP+L1AyvdpOF4ybXQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When a cpu is hot-unplugged, it is put in idle state and the function
arch_cpu_idle_dead() is called. The timer interrupt for this processor
should be disabled, otherwise there will be pending timer interrupt for
the unplugged cpu, so that vcpu is prevented from giving up scheduling
when system is running in vm mode.
This patch implements the timer shutdown interface so that the constant
timer will be properly disabled when a CPU is hot-unplugged.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The kernel parameter 'nokaslr' is handled before start_kernel(), so we
don't need early_param() to mark it technically. But it can cause a boot
warning as follows:
Unknown kernel command line parameters "nokaslr", will be passed to user space.
When we use 'init=/bin/bash', 'nokaslr' which passed to user space will
even cause a kernel panic. So we use early_param() to mark 'nokaslr',
simply print a notice and silence the boot warning (also fix a potential
panic). This logic is similar to RISC-V.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
To clarify, the previous version functioned flawlessly. However, it's
worth noting that the LLVM's LoongArch backend currently lacks support
for cross-section label calculations. With this patch, we enable the use
of clang to compile relocatable kernels.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
|
|
rcutree_report_cpu_starting() must be called before cpu_probe() to avoid
the following lockdep splat that triggered by calling __alloc_pages() when
CONFIG_PROVE_RCU_LIST=y:
=============================
WARNING: suspicious RCU usage
6.6.0+ #980 Not tainted
-----------------------------
kernel/locking/lockdep.c:3761 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by swapper/1/0:
#0: 900000000c82ef98 (&pcp->lock){+.+.}-{2:2}, at: get_page_from_freelist+0x894/0x1790
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.0+ #980
Stack : 0000000000000001 9000000004f79508 9000000004893670 9000000100310000
90000001003137d0 0000000000000000 90000001003137d8 9000000004f79508
0000000000000000 0000000000000001 0000000000000000 90000000048a3384
203a656d616e2065 ca43677b3687e616 90000001002c3480 0000000000000008
000000000000009d 0000000000000000 0000000000000001 80000000ffffe0b8
000000000000000d 0000000000000033 0000000007ec0000 13bbf50562dad831
9000000005140748 0000000000000000 9000000004f79508 0000000000000004
0000000000000000 9000000005140748 90000001002bad40 0000000000000000
90000001002ba400 0000000000000000 9000000003573ec8 0000000000000000
00000000000000b0 0000000000000004 0000000000000000 0000000000070000
...
Call Trace:
[<9000000003573ec8>] show_stack+0x38/0x150
[<9000000004893670>] dump_stack_lvl+0x74/0xa8
[<900000000360d2bc>] lockdep_rcu_suspicious+0x14c/0x190
[<900000000361235c>] __lock_acquire+0xd0c/0x2740
[<90000000036146f4>] lock_acquire+0x104/0x2c0
[<90000000048a955c>] _raw_spin_lock_irqsave+0x5c/0x90
[<900000000381cd5c>] rmqueue_bulk+0x6c/0x950
[<900000000381fc0c>] get_page_from_freelist+0xd4c/0x1790
[<9000000003821c6c>] __alloc_pages+0x1bc/0x3e0
[<9000000003583b40>] tlb_init+0x150/0x2a0
[<90000000035742a0>] per_cpu_trap_init+0xf0/0x110
[<90000000035712fc>] cpu_probe+0x3dc/0x7a0
[<900000000357ed20>] start_secondary+0x40/0xb0
[<9000000004897138>] smpboot_entry+0x54/0x58
raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.
See also commit 29368e093921 ("x86/smpboot: Move rcu_cpu_starting() earlier"),
commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier").
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.7
Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.
Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
such as IPI, irqchips, pci devices etc.
|
|
Currently the code disables WUC only disables it for ioremap_wc(), which
is only used when mapping writecombine pages like ioremap() (mapped to
the kernel space). But for VRAM mapped in TTM/GEM, it is mapped with a
crafted pgprot by the pgprot_writecombine() function, in which case WUC
isn't disabled now.
Disable WUC for pgprot_writecombine() (fallback to SUC) if needed, like
ioremap_wc().
This improves the AMDGPU driver's stability (solves some misrendering)
on Loongson-3A5000/3A6000 machines.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As described in include/linux/linkage.h,
FUNC -- C-like functions (proper stack frame etc.)
CODE -- non-C code (e.g. irq handlers with different, special stack etc.)
SYM_FUNC_{START, END} -- use for global functions
SYM_CODE_{START, END} -- use for non-C (special) functions
So use SYM_CODE_* to annotate exception handlers.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After the vga console no longer relies on global screen_info, there are
only two remaining use cases:
- on the x86 architecture, it is used for multiple boot methods
(bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer
settings to a number of device drivers.
- on other architectures, it is only used as part of the EFI stub,
and only for the three sysfb framebuffers (simpledrm, simplefb, efifb).
Remove the duplicate data structure definitions by moving it into the
efi-init.c file that sets it up initially for the EFI case, leaving x86
as an exception that retains its own definition for non-EFI boots.
The added #ifdefs here are optional, I added them to further limit the
reach of screen_info to configurations that have at least one of the
users enabled.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231017093947.3627976-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On non-x86 architectures, the screen_info variable is generally only
used for the VGA console where supported, and in some cases the EFI
framebuffer or vga16fb.
Now that we have a definite list of which architectures actually use it
for what, use consistent #ifdef checks so the global variable is only
defined when it is actually used on those architectures.
Loongarch and riscv have no support for vgacon or vga16fb, but
they support EFI firmware, so only that needs to be checked, and the
initialization can be removed because that is handled by EFI.
IA64 has both vgacon and EFI, though EFI apparently never uses
a framebuffer here.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added. Make adjustments in
all call sites of parse_crashkernel() in arch.
Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement LoongArch vcpu world switch, including vcpu enter guest and
vcpu exit from guest, both operations need to save or restore the host
and guest registers.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:
kmod: zsmalloc: Unknown relocation type 109
kmod: fuse: Unknown relocation type 109
kmod: fuse: Unknown relocation type 109
kmod: radeon: Unknown relocation type 109
kmod: nf_tables: Unknown relocation type 109
kmod: nf_tables: Unknown relocation type 109
This is because the latest upstream binutils replaces a pair of ADD64
and SUB64 with 64_PCREL, so add support for 64_PCREL relocation type.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:
kmod: zsmalloc: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: pstore: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: fat: Unsupport relocation type 99, please add its support.
This is because the latest upstream binutils replaces a pair of ADD32
and SUB32 with 32_PCREL, so add support for 32_PCREL relocation type.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The relocation types from 101 to 109 are used by GNU binutils >= 2.41,
add their definitions to use them in later patches.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=include/elf/loongarch.h#l230
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
For 64bit kernel without HIGHMEM, high_memory is the virtual address of
the highest physical address in the system. But __va(get_num_physpages()
<< PAGE_SHIFT) is not what we want for high_memory because there may be
holes in the physical address space. On the other hand, max_low_pfn is
calculated from memblock_end_of_DRAM(), which is exactly corresponding
to the highest physical address, so use it for high_memory calculation.
Cc: <stable@vger.kernel.org>
Fixes: d4b6f1562a3c3284adce ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()")
we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled:
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733
[ 0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90
[ 0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0
[ 0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000
[ 0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800
[ 0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20
[ 0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000
[ 0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000
[ 0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000
[ 0.000000] ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c
[ 0.000000] ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c
[ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE)
[ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 0.000000] ECFG: 00070800 (LIE=11 VS=7)
[ 0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0)
[ 0.000000] BADV: 0000000000002b82
[ 0.000000] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000)
[ 0.000000] Modules linked in:
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____))
[ 0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00
[ 0.000000] 900000000470e000 90000000002c1918 0000000000000000 9000000004110780
[ 0.000000] 00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748
[ 0.000000] 0000000000000000 900000000421ca84 9000000004620000 9000000004564970
[ 0.000000] 90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000
[ 0.000000] 9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000
[ 0.000000] 0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918
[ 0.000000] 90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000
[ 0.000000] 90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c
[ 0.000000] 9000000004270008 0000000000000001 0000000000000000 90000000045ccd00
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c
[ 0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350
[ 0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc
[ 0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4
[ 0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc
[ 0.000000]
[ 0.000000] Code: 02eb21ad 00410f4c 380c31ac <262b818d> 6800b70d 02c1c196 0015001c 57fe4bb1 260002cd
The reason is early memblock_reserve() in memblock_init() set node id to
MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain
reserve_bootmem_region() -> init_reserved_page(). After memblock_init(),
those late calls of memblock_reserve() operate on subregions of memblock
.memory regions. As a result, these reserved regions will be set to the
correct node at the first iteration of memmap_init_reserved_pages().
So set all reserved memblocks on Node#0 at initialization can avoid this
panic.
Reported-by: WANG Xuerui <git@xen0n.name>
Tested-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: WANG Xuerui <git@xen0n.name> # with nits addressed
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The initial aim is to silence the following objtool warning:
arch/loongarch/kernel/relocate_kernel.o: warning: objtool: relocate_new_kernel+0x74: unreachable instruction
There are two adjacent "b" instructions, the second one is unreachable,
it is dead code, just remove it.
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There are some building warnings when building LoongArch kernel with W=1
as following, this patch fixes them.
arch/loongarch/kernel/acpi.c:284:13: warning: no previous prototype for ‘acpi_numa_arch_fixup’ [-Wmissing-prototypes]
284 | void __init acpi_numa_arch_fixup(void) {}
| ^~~~~~~~~~~~~~~~~~~~
arch/loongarch/kernel/time.c:32:13: warning: no previous prototype for ‘constant_timer_interrupt’ [-Wmissing-prototypes]
32 | irqreturn_t constant_timer_interrupt(int irq, void *data)
| ^~~~~~~~~~~~~~~~~~~~~~~~
arch/loongarch/kernel/traps.c:496:25: warning: no previous prototype for 'do_fpe' [-Wmissing-prototypes]
496 | asmlinkage void noinstr do_fpe(struct pt_regs *regs
| ^~~~~~
arch/loongarch/kernel/traps.c:813:22: warning: variable ‘opcode’ set but not used [-Wunused-but-set-variable]
813 | unsigned int opcode;
| ^~~~~~
arch/loongarch/kernel/signal.c:895:14: warning: no previous prototype for ‘get_sigframe’ [-Wmissing-prototypes]
895 | void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
| ^~~~~~~~~~~~
arch/loongarch/kernel/syscall.c:21:40: warning: initialized field overwritten [-Woverride-init]
21 | #define __SYSCALL(nr, call) [nr] = (call),
| ^
arch/loongarch/kernel/syscall.c:40:14: warning: no previous prototype for ‘do_syscall’ [-Wmissing-prototypes]
40 | void noinstr do_syscall(struct pt_regs *regs)
| ^~~~~~~~~~
arch/loongarch/kernel/smp.c:502:17: warning: no previous prototype for ‘start_secondary’ [-Wmissing-prototypes]
502 | asmlinkage void start_secondary(void)
| ^~~~~~~~~~~~~~~
arch/loongarch/kernel/process.c:309:15: warning: no previous prototype for ‘arch_align_stack’ [-Wmissing-prototypes]
309 | unsigned long arch_align_stack(unsigned long sp)
| ^~~~~~~~~~~~~~~~
arch/loongarch/kernel/topology.c:13:5: warning: no previous prototype for ‘arch_register_cpu’ [-Wmissing-prototypes]
13 | int arch_register_cpu(int cpu)
| ^~~~~~~~~~~~~~~~~
arch/loongarch/kernel/topology.c:27:6: warning: no previous prototype for ‘arch_unregister_cpu’ [-Wmissing-prototypes]
27 | void arch_unregister_cpu(int cpu)
| ^~~~~~~~~~~~~~~~~~~
arch/loongarch/kernel/module-sections.c:103:5: warning: no previous prototype for ‘module_frob_arch_sections’ [-Wmissing-prototypes]
103 | int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
arch/loongarch/mm/hugetlbpage.c:56:5: warning: no previous prototype for ‘is_aligned_hugepage_range’ [-Wmissing-prototypes]
56 | int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Since commit 0a6b58c5cd0d ("lockdep: fix static memory detection even
more") the lockdep code uses is_kernel_core_data(), is_kernel_rodata()
and init_section_contains() to verify if a lock is located inside a
kernel static data section.
This change triggers a failure on LoongArch, for which the vmlinux.lds.S
script misses to put the locks (as part of in the .data.rel symbols)
into the Linux data section.
This patch fixes the lockdep problem by moving *(.data.rel*) symbols
into the kernel data section (from _sdata to _edata).
Additionally, move other wrongly assigned symbols too:
- altinstructions into the _initdata section,
- PLT symbols behind the read-only section, and
- *(.la_abs) into the data section.
Cc: stable <stable@kernel.org> # v6.4+
Fixes: 0a6b58c5cd0d ("lockdep: fix static memory detection even more")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Allow usage of LSX/LASX in the kernel, and use them for
SIMD-optimized RAID5/RAID6 routines
- Add Loongson Binary Translation (LBT) extension support
- Add basic KGDB & KDB support
- Add building with kcov coverage
- Add KFENCE (Kernel Electric-Fence) support
- Add KASAN (Kernel Address Sanitizer) support
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add KASAN (Kernel Address Sanitizer) support
LoongArch: Simplify the processing of jumping new kernel for KASLR
kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
LoongArch: Add KFENCE (Kernel Electric-Fence) support
LoongArch: Get partial stack information when providing regs parameter
LoongArch: mm: Add page table mapped mode support for virt_to_page()
kfence: Defer the assignment of the local variable addr
LoongArch: Allow building with kcov coverage
LoongArch: Provide kaslr_offset() to get kernel offset
LoongArch: Add basic KGDB & KDB support
LoongArch: Add Loongson Binary Translation (LBT) extension support
raid6: Add LoongArch SIMD recovery implementation
raid6: Add LoongArch SIMD syndrome calculation
LoongArch: Add SIMD-optimized XOR routines
LoongArch: Allow usage of LSX/LASX in the kernel
LoongArch: Define symbol 'fault' as a local label in fpu.S
LoongArch: Adjust {copy, clear}_user exception handler behavior
LoongArch: Use static defined zero page rather than allocated
...
|
|
1/8 of kernel addresses reserved for shadow memory. But for LoongArch,
There are a lot of holes between different segments and valid address
space (256T available) is insufficient to map all these segments to kasan
shadow memory with the common formula provided by kasan core, saying
(addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
So LoongArch has a arch-specific mapping formula, different segments are
mapped individually, and only limited space lengths of these specific
segments are mapped to shadow.
At early boot stage the whole shadow region populated with just one
physical page (kasan_early_shadow_page). Later, this page is reused as
readonly zero shadow for some memory that kasan currently don't track.
After mapping the physical memory, pages for shadow memory are allocated
and mapped.
Functions like memset()/memcpy()/memmove() do a lot of memory accesses.
If bad pointer passed to one of these function it is important to be
caught. Compiler's instrumentation cannot do this since these functions
are written in assembly.
KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions in
mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in names, so we could call non-instrumented variant
if needed.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Modified relocate_kernel() doesn't return new kernel's entry point but
the random_offset. In this way we share the start_kernel() processing
with the normal kernel, which avoids calling 'jr a0' directly and allows
some other operations (e.g, kasan_early_init) before start_kernel() when
KASLR (CONFIG_RANDOMIZE_BASE) is turned on.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
