summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-04-28Merge tag 'ixp4xx-for-armsoc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc This modernizes the IXP4xx platform and adds initial Device Tree Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to offset 16, converts to SPARSE_IRQ, then we add proper subsystem drivers in each subsystem for irqchip, GPIO and clocksource and switch over to using these new drivers. Next we modernize the NPE and QMGR drivers and push them down into drivers/soc. This has been tested on the IXP4xx NSLU2 and the Gateworks GW2358-4. * tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits) ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ARM: ixp4xx: Move IXP4xx QMGR and NPE headers ARM: ixp4xx: Move NPE and QMGR to drivers/soc ARM: dts: Add some initial IXP4xx device trees ARM: ixp4xx: Add device tree boot support ARM: ixp4xx: Add DT bindings gpio: ixp4xx: Add OF probing support gpio: ixp4xx: Add DT bindings clocksource/drivers/ixp4xx: Add OF initialization support clocksource/drivers/ixp4xx: Add DT bindings ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm-soc-for-v5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/soc Renesas ARM Based SoC Updates for v5.2 * Power Management - Fix a leaked reference by adding missing of_node_put * R-Car M2-W (R8A77910) based Porter board - Enable regulator quirk * tag 'renesas-arm-soc-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: fix a leaked reference by adding missing of_node_put ARM: shmobile: porter: enable R-Car Gen2 regulator quirk Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm-defconfig-for-v5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig Renesas ARM Based SoC Defconfig Updates for v5.2 shmobile and multi_v7 defconfigs * Enable support for CFI NOR FLASH shmobile defconfig * Enable USB [EO]HCI HCD PLATFORM and PHY_RCAR_GEN3_USB2 * Refresh for v5.1-rc1 * tag 'renesas-arm-defconfig-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH ARM: shmobile: defconfig: Enable support for CFI NOR FLASH ARM: shmobile: defconfig: Refresh for v5.1-rc1 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig ARM: tegra: Default configuration updates for v5.2-rc1 Enable Trusted Foundations support in the default configurations for Tegra and multi-v7. This is necessary because the symbol is no longer selected by default. * tag 'tegra-for-5.2-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: Enable Trusted Foundations for multiplatform ARM v7 ARM: tegra: Enable Trusted Foundations by default ARM: tegra: Update default configuration for v5.1-rc1 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers ARM: tegra: Core changes for v5.2-rc1 One of these patches enables PM by default on 32-bit ARM, following the same default that we already have on 64-bit ARM. The other patch fixes a cosmetic issue in the cpuidle driver for Tegra20 and Tegra30. * tag 'tegra-for-5.2-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 ARM: tegra: enforce PM requirement Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-memory' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers memory: tegra: Changes for v5.2-rc1 These are a set of fixes for various issues related to the Tegra memory controller. * tag 'tegra-for-5.2-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching memory: tegra: Properly spell "tegra" memory: tegra: Make terga20_mc_reset_ops static Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-firmware' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc firmware: tegra: Changes for v5.2-rc1 This set of changes includes improvements for Trusted Foundations and also moves the source files for this support into the standard location under drivers/firmware. * tag 'tegra-for-5.2-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: Move Trusted Foundations support ARM: tegra: Sort dependencies alphabetically ARM: tegra: Add firmware calls required for suspend-resume on Tegra30 ARM: tegra: Always boot CPU in ARM-mode ARM: tegra: Don't apply CPU erratas in insecure mode ARM: tegra: Set up L2 cache using Trusted Foundations firmware ARM: trusted_foundations: Provide information about whether firmware is registered ARM: trusted_foundations: Make prepare_idle call to take mode argument ARM: trusted_foundations: Support L2 cache maintenance Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: debug-ll: add default address for digicolorArnd Bergmann
The digicolor platform has three UARTs, but the Kconfig.debug file explicitly lists port zero as the one to be used for the console, while not providing any default values. This can get an automated randconfig build stuck in a loop waiting for the user to input the number. As we already know the physical address, this patch provides that number as default, along with a reasonable default value for the virtual address. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'multi-v7-defconfig-for-v5.2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig Update multi_v7_defconfig for dropped and moved options This series of two patches first updates multi_v7_defconfig for dropped options, and then updates it for moved options. We want to do this on regular basis to make it easier to patch multi_v7_defconfig without introducing errors and merge conflicts. We update the defconfig in two patches to make sure we're not accidentally losing any needed options. After this, updating multi_v7_defconfig will become trivial, and most likely only a small follow-up patches are needed after the merge window to update it again for moved options. * tag 'multi-v7-defconfig-for-v5.2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: multi_v7_defconfig: Update for moved options ARM: multi_v7_defconfig: Update for dropped options Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: u300: regulator: add MODULE_LICENSE()Arnd Bergmann
The missing license showed up as a randconfig warning now, no idea why we never saw that earlier. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: ep93xx: move private headers out of mach/*Arnd Bergmann
gpio-ep93xx.h, hardware.h, and platform.h are only used in arch/arm/mach-ep93xx, so we can move them one there and no longer expose them to device drivers. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: ep93xx: move pinctrl interfaces into include/linux/socArnd Bergmann
ep93xx does not have a proper pinctrl driver, but does things ad-hoc through mach/platform.h, which is also used for setting up the boards. To avoid using mach/*.h headers completely, let's move the interfaces into include/linux/soc/. This is far from great, but gets the job done here, without the need for a proper pinctrl driver. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: ep93xx: move network platform data to separate headerArnd Bergmann
The header file is the only thing preventing us from building the driver in a cross-platform configuration, so move the structure we are interested in to the global platform_data location and enable compile testing. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'davinci-for-v5.2/soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc This update for DaVinci SoC support simplifies the VBUS enable and overcurrent handling code in DA8XX OHCI driver by modeling vbus GPIO as a regulator. This unifies code for all users, device tree and non-device-tree. The OHCI driver patches have been acked by its maintainer. * tag 'davinci-for-v5.2/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: usb: ohci-da8xx: drop the vbus GPIO ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx usb: ohci-da8xx: disable the regulator if the overcurrent irq fired usb: ohci-da8xx: let the regulator framework keep track of use count ARM: davinci: add missing sentinels to GPIO lookup tables Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'pxa-for-5.2' of https://github.com/rjarzmik/linux into arm/socOlof Johansson
This is the pxa changes for 5.2 cycle : - only a little fix the PXA SSP removal path * tag 'pxa-for-5.2' of https://github.com/rjarzmik/linux: ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data" Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-soc-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.2 1. Cleanup in mach code. 2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested with Odroid XU3/XU4/HC1 family). Finally this brings a working S2R on these Odroid boards (still other drivers might have some issues but mach code seems to be finished). 3. Require MCPM for Exynos542x boards because otherwise not all of cores will come online. 4. GPIO regulator cleanup on S3C6410 Craig. * tag 'samsung-soc-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c64xx: Tidy up handling of regulator GPIO lookups ARM: exynos: Set MCPM as mandatory for Exynos542x/5800 SoCs ARM: exynos: Fix infinite loops on CPU powerup failure ARM: exynos: Fix a leaked reference by adding missing of_node_put ARM: exynos: Fix undefined instruction during Exynos5422 resume ARM: exynos: Add CPU state management for Exynos542x under secure firmware ARM: exynos: Add Exynos SMC values for secure memory write ARM: exynos: Move Exynos542x CPU state reset to pm_prepare() Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/am4-pm-v2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers PM changes for am335x and am437x This series adds support for am437x RTC-only mode in suspend. In the RTC-only mode suspend, everything is shut down except the RTC. This makes the power consumption very low for suspend mode. To support RTC-only mode, we need to export omap_rtc_power_off_program() from the rtc driver and improve PM code to save and restore the wkup domain context. As RTC-only mode depends on the device being wired properly for things like memory, we need to also check for the machine type before we allow it. We also need to run DDR3 hardware leveling on resume. Note that there is a trivial merge conflict between the RTC branch and these changes where the RTC branch makes tm2bcd() a void function and the error handling parts can be just dropped. * tag 'omap-for-v5.2/am4-pm-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume path memory: ti-emif-sram: Add ti_emif_run_hw_leveling for DDR3 hardware leveling soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top ARM: OMAP2+: pm33xx: Add support for rtc+ddr in self refresh mode rtc: OMAP: Add support for rtc-only mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/ti-sysc-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc Driver changes for ti-sysc for v5.2 merge window This series of changes for ti-sysc interconnect target module driver gets us to the point where we can actually drop legacy platform data for many devices in favor of device tree data. To do this, we improve ti-sysc driver not to rely on platform data callbacks to manage module clocks, and handle more quirks needed for some devices. Also few minor fixes are needed, but were considered not needed to be sent separately as they only show up with this series. Then we drop several thousands of lines of legacy platform data for omap4, omap5, dra7, am335x and am437x. We drop platform data for mmc, i2c, gpio and uart devices to start with as those are typically easily tested on all devices. In case of unexpected issues, we can just add back the legacy platform data for a single device type if needed. Finally we add initial support for enabling and disabling some devices without legacy platform data callbacks. I was planning on sending the dropping of legacy platform data as a separate series, but already applied Roger's patch on top and pushed it out. Note that this series depends on related SoC and is based on those. * tag 'omap-for-v5.2/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (33 commits) bus: ti-sysc: Add generic enable/disable functions ARM: OMAP2+: Drop mcspi platform data for omap4 ARM: OMAP2+: Drop uart platform data for dra7 ARM: OMAP2+: Drop gpio platform data for dra7 ARM: OMAP2+: Drop i2c platform data for dra7 ARM: OMAP2+: Drop mmc platform data for dra7 ARM: OMAP2+: Drop uart platform data for omap5 ARM: OMAP2+: Drop gpio platform data for omap5 ARM: OMAP2+: Drop i2c platform data for omap5 ARM: OMAP2+: Drop mmc platform data for omap5 ARM: OMAP2+: Drop uart platform data for am33xx and am43xx ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx ARM: OMAP2+: Drop mmc platform data for am330x and am43xx ARM: OMAP2+: Drop uart platform data for omap4 ARM: OMAP2+: Drop gpio platform data for omap4 ARM: OMAP2+: Drop i2c platform data for omap4 ARM: OMAP2+: Drop mmc platform data for omap4 Documentation: bus: ti-sysc: fix spelling mistakes "multipe" and "interconnet" bus: ti-sysc: Detect DMIC for debugging ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/soc-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc SoC changes for omap variants for v5.2 merge window This series of changes mostly consists of ti-sysc interconnect driver related preparation work. With these changes and the related ti-sysc driver changes, we can start dropping legacy omap_hwmod_*data.c platform data for many devices. There are also two am335x and am437x related PM changes for secure devices that have ROM handling some parts and needs EFUSE power domain active. * tag 'omap-for-v5.2/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: pm33xx-core: Do not Turn OFF CEFUSE as PPA may be using it ARM: OMAP2+: Wakeupgen: AM43xx HS devices should save context like non-HS ARM: OMAP2+: Handle reset quirks for dynamically allocated modules ARM: OMAP2+: Remove hwmod .rev data and use local SoC checks instead ARM: OMAP2+: Allocate struct omap_hwmod based on dts data ARM: OMAP2+: Define _HWMOD_STATE_DEFAULT and use it ARM: OMAP2+: Prepare class allocation for dynamically allocated modules ARM: OMAP2+: Make interconnect target module allocation functions static ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset() ARM: dts: Fix dcan clkctrl clock for am3 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: multi_v7_defconfig: Enable support for STPMIC1Pascal Paillet
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: stm32: add AMBA support for stm32 familyLudovic Barre
This patch enables AMBA support for stm32 family. stm32 family embeds different amba pl180 variants. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-fixes-5.1-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 5.1, round 3: - A fix on LS1021A-TWR board that SGMII PCS link remains down for eTSEC0 upon an ifdown/ifup sequence. * tag 'imx-fixes-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-fixes-for-5.1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 5.1 - Pinctrl related fixes for the A33 NAND controller - Fix the refcounting of DT nodes in our core code - Fix for a typo'd DT property * tag 'sunxi-fixes-for-5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-fixes-5.1-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 5.1, round 2: - A couple of imx6q-logicpd device tree fixes to reduce inrush current, so that the board can always work properly. - Fix buggy device trees that use AR803X to set up phy-mode as rgmii-id. These device trees are broken since day one, and the bug gets exposed by the AR803X phy driver changes. i.MX community agreed to fix those broken device trees rather than supporting messy back compatibility in driver code. * tag 'imx-fixes-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1 ARM: dts: imx6q-logicpd: Reduce inrush current on start ARM: dts: imx: Fix the AR803X phy-mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt-5.2-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2, second round 1. DTC warning fixes: move timer and pmu nodes outside of soc node, 2. Properly override MDMA0 on Universal C210, 3. Fix camera clock provider (to match bindings and driver) on Goni. * tag 'samsung-dt-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: Fix camera clock provider on Goni board ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210 ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250 ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250 ARM: dts: exynos: Move pmu and timer nodes out of soc Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: dts: gemini: Indent DIR-685 partition tableLinus Walleij
It is discouraged to have OF partitions as subnodes directly under the device, create a "partitions" subnode and put the partitions inside it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-dts-for-5.2-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.2 - Part 2 * Add cxo_board as ref clk for DSI phy * tag 'qcom-dts-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts32-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Much love for rk3288 in general (power coefficients for the scheduler) and veyron chromeos devices in particular (regulators, suspend, cleanups) and bulk conversion of the remaining gpios to the helper constants denoting the iomux. * tag 'v5.2-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: vdd_gpu off in suspend for rk3288-veyron ARM: dts: rockchip: vcc33_ccd off in suspend for rk3288-veyron-chromebook ARM: dts: rockchip: Add DDR retention/poweroff to rk3288-veyron hogs ARM: dts: rockchip: Add dynamic-power-coefficient for rk3288 ARM: dts: rockchip: bulk convert gpios to their constant counterparts ARM: dts: rockchip: Add BT_EN to the power sequence for veyron ARM: dts: rockchip: Remove unnecessary setting of UART0 SCLK rate on veyron Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" propertiesRobin Murphy
The old "cooling-{min,max}-state" properties for thermal bindings were ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level"), which were later removed entirely by commit e04907dbc259 ("dt-bindings: thermal: Remove "cooling-{min|max}-level" properties"). The pwm-fan binding, however, was apparently in-flight in parallel with that ratification, and so managed to introduce an example of the old properties which escaped the scope of the later cleanup and has thus continued to be dutifully copied for new boards despite being useless. Clean up these remaining undocumented anachronisms to minimise any further confusion. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt for 5.2 (part 1) - Add interrupt support for wathdog on Armada 38x * tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: add interrupts for watchdog Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge branch 'at91-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt * 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91-vinco: use SPDX-License-Identifier ARM: dts: atmel boards: use SPDX-License-Identifier ARM: dts: at91sam9xe: use SPDX-License-Identifier ARM: dts: sama5d{2,4}: use SPDX-License-Identifier ARM: dts: at91: sama5d2_xplained: Add proper regulator states for suspend-to-mem ARM: dts: at91: sama5d2: add labels to soc dtsi for derivative boards Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-dts-for-5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.2 * Add gpio ranges for Qualcomm platforms * Correct the IPQ4019 PCIe BAR range * tag 'qcom-dts-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: ipq4019: enlarge PCIe BAR range ARM: dts: qcom: pma8084: add gpio-ranges ARM: dts: qcom: msm8660: add gpio-ranges ARM: dts: qcom: mdm9615: add gpio-ranges ARM: dts: qcom: apq8064: add gpio-ranges Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-dt-5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm device tree update for 5.2: - New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann, imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4. - Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL. - Use new 'reset-gpios' property describing CODEC reset pin for board mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart. - Specify viewport count for PCIE block on SoC imx7d and imx6qdl. - Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs. - Rename MMDC memory controller device to be generic and add MMDC device for imx7ulp SoC. - Add OCOTP device support for imx7ulp SoC. - Improve ZII board DTS by switching to SPDX identifier and using generic device node name. - A series from Rui Miguel Silva to add various media related devices for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board. - Random small updates on various board support. * tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (59 commits) ARM: dts: imx7s: Specify #io-channel-cells in ADC nodes ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0 ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAIN ARM: dts: Add support for ZII i.MX7 RPU2 board ARM: dts: bugfix tqma7 soft reset issue ARM: dts: imx53: Add Menlosystems M53 board ARM: dts: imx53: Rename M53 SoM touchscreen node ARM: dts: imx6dl-sabreauto: update opp table for auto part ARM: dts: imx: Use generic node names for Zii dts ARM: dts: imx: Switch Zii dts to SPDX identifier ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend ARM: dts: imx6q-logicpd: Enable Analog audio capture ARM: dts: imx6sll: add cooling-cells for cpu-freq cooling device ARM: dts: imx50: Add Kobo Aura DTS ARM: dts: imx6qdl-var-dart: Use new CODEC reset pin name ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2, round 2 - enable RTC on odroid-c1, ec100 - meson8: add internal clock measurer * tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroid-c1: prepare support for the RTC ARM: dts: meson8b: ec100: enable the RTC ARM: dts: meson: add support for the RTC Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm-dt-for-v5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.2 * R-Car E2 (r8a7794) based Alt board - Enable USB and DA9063 PMIC * R-Car V2H (R8A77920) based Blanche board - Enable IIC3 and DA9063 PMIC * RZ/G1C (r8a77470) based iWave SBC - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB * RZ/G1C (r8a77470) SoC - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT * RZ/A1H (R7S7210) based rskrza1 board - Enable remaining LEDs and I2C * R-Mobile A1 (r8a7740) based ape6evm, R-Car H1 (r8a7779) based marzen, R-Car M1A (R8A7778) based bockw and Emma Mobile EV2 based kzm9d boads - Tidy up bootargs * R-Mobile A1 (r8a7740) based ape6evm - Enable NOR FLASH * tag 'renesas-arm-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits) ARM: dts: ape6evm: Reorder bootargs ARM: dts: marzen: Add rw to bootargs and use ip=dhcp ARM: dts: bockw: Reorder bootargs ARM: dts: kzm9d: Add rw parameter to bootargs ARM: dts: iwg23s-sbc: Enable HS-USB ARM: dts: r8a77470: Add HSUSB device nodes ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device ARM: dts: iwg23s-sbc: Enable USB Phy[01] ARM: dts: r8a77470: Add USB PHY DT support ARM: dts: r8a77470: Add VIN support ARM: dts: r8a77470: Add PWM support ARM: dts: r8a77470: Add HSCIF support ARM: dts: alt: Enable USB support ARM: dts: rskrza1: Add remaining LEDs ARM: dts: rskrza1: Add I2C support ARM: dts: iwg23s-sbc: Add HDMI support ARM: dts: r8a77470: Add DU support ARM: dts: ape6evm: Add NOR FLASH ARM: dts: alt: Add DA9063 PMIC node ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-h3-h5-for-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3/H5 changes for 5.2 Our usual bunch of changes shared between arm and arm64, the most notable one being: - Fix of improper usage of DT bindings, thanks to the DT validation - Add the SID for the H3 and H5 - New board: RerVision H3-DVK * tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: mapleboard: Remove cd-inverted ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board ARM: dts: sun8i: h3: Add default dr_mode ARM: dts: sun8i: h3: Refactor the pinctrl node names ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry ARM: dts: sunxi: h3/h5: Add device node for SID ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-dt-for-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.2 This PR is pretty significant, but it been mostly about: - Fixing the DTC warnings in most of our DT. We're now down to 2 warnings, from several thousands. - Fixing a good number of minor issues, typos, and so on thanks to the DT validation tools - Describe the MBUS controller and the special DMA RAM mapping on the A13 - Add support for the LRADC on the A83t - Add support for the I2C bus used for the PMIC on the A33 - Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes * tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits) ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards ARM: dtsi: axp81x: add USB power supply node ARM: dts: sun5i: Reorder pinctrl nodes ARM: dts: sun6i: i7: Remove useless property ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences. ARM: dts: sun5i: Add the MBUS controller dt-bindings: sunxi: Add compatible for OrangePi 3 board ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins dt-bindings: arm: sunxi: Add Beelink GS1 board ARM: dts: sun8i: tbs-a711: Add support for volume keys input ARM: dts: sunxi: Add R_LRADC support for A83T ARM: dts: sunxi: Improve A33 NAND transfers by using DMA ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module) ARM: dts: sunxi: Remove useless pinctrl nodes ARM: dts: sunxi: Remove pinctrl groups setting bias ARM: dts: sunxi: Remove useless address and size cells ARM: dts: sunxi: Conform to DT spec for NAND controller ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.2-rc1 This contains a set of changes to move PLL power supplies to the XUSB pad controller, which is necessary to ensure the proper sequencing during boot. Other patches in this set clean up usage of SPDX license identifiers in device tree files as well as add support for the ACTMON hardware on Tegra30. * tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add ACTMON support on Tegra30 ARM: tegra: venice2: Move PLL power supplies to XUSB pad controller ARM: tegra: nyan: Move PLL power supplies to XUSB pad controller ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controller ARM: tegra: apalis: Move PLL power supplies to XUSB pad controller ARM: tegra: Remove gratuitous parentheses in SPDX license identifier ARM: tegra: Convert to SPDX license tags for Tegra124 Apalis Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-am3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Add am335x pinmux defines and start using them This series of changes adds a new pinmux instance defines for am335x, and a new AM33XX_PADCONF macro. And then the rest of the series updates the dts files to use it. The reasons for doing this is the pinmux configuration has been hard to use and read. And we need to do this for eventually for moving to use values. This change is done one machine at a time, and can be easily reverted as needed in case of unexpected trouble. The old macro is still working, and we're planning to keep it around until we eventually change to use * tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits) ARM: dts: am335x: wega: Replaced register offsets with defines ARM: dts: am335x: sl50: Replaced register offsets with defines ARM: dts: am335x: shc: Replaced register offsets with defines ARM: dts: am335x: sbc-t335: Replaced register offsets with defines ARM: dts: am335x: sancloud-bbe: Replaced register offsets with defines ARM: dts: am335x: phycore-som: Replaced register offsets with defines ARM: dts: am335x: pepper: Replaced register offsets with defines ARM: dts: am335x: pdu001: Replaced register offsets with defines ARM: dts: am335x: pcm-953: Replaced register offsets with defines ARM: dts: am335x: osd335x-common: Replaced register offsets with defines ARM: dts: am335x: osd3358-sm-red: Replaced register offsets with defines ARM: dts: am335x: nano: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-8100-me-t: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2101: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2100-common: Replaced register offsets with defines ARM: dts: am335x: lxm: Replaced register offsets with defines ARM: dts: am335x: igep0033: Replaced register offsets with defines ARM: dts: am335x: icev2: Replaced register offsets with defines ARM: dts: am335x: evmsk: Replaced register offsets with defines ARM: dts: am335x: evm: Replaced register offsets with defines ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'socfpga_dts_updates_for_v5.2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.2 - Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz * tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA arm64: dts: stratix10: increase QSPI max frequency to 100MHz arm64: dts: stratix10: enable MMC highspeed support ARM: dts: socfpga: enable MMC highspeed support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'ux500-dts-v5.2-armsoc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.2 kernel cycle. - This adds the MCDE display controller and some displays. - The Lima MALI-400 driver is added to the kernel, so let's add this block to the Ux500 DTS file. * tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Ux500: Add MCDE and Samsung display ARM: dts: ux500: Add Mali-400 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap4 and 5 l4 abe interconnect This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place. This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late. * tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits) ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5 ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4 ARM: dts: Add common mcpdm dts file for omap4 bus: ti-sysc: Add generic enable/disable functions ARM: OMAP2+: Drop mcspi platform data for omap4 ARM: OMAP2+: Drop uart platform data for dra7 ARM: OMAP2+: Drop gpio platform data for dra7 ARM: OMAP2+: Drop i2c platform data for dra7 ARM: OMAP2+: Drop mmc platform data for dra7 ARM: OMAP2+: Drop uart platform data for omap5 ARM: OMAP2+: Drop gpio platform data for omap5 ARM: OMAP2+: Drop i2c platform data for omap5 ARM: OMAP2+: Drop mmc platform data for omap5 ARM: OMAP2+: Drop uart platform data for am33xx and am43xx ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx ARM: OMAP2+: Drop mmc platform data for am330x and am43xx ARM: OMAP2+: Drop uart platform data for omap4 ARM: OMAP2+: Drop gpio platform data for omap4 ARM: OMAP2+: Drop i2c platform data for omap4 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap variants This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810. We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss. * tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Separate AM57 dtsi files dt-binding: arm: omap: Add information for AM5748 ARM: dts: omap2420-n810: Use new CODEC reset pin name ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on ARM: dts: dra7: Add properties to enable PCIe x2 lane mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt-5.2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2 1. Use proper ADC on Exynos4412. 2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps, unused regulators, ADC and UHS-I SD card support. Beside that adjust regulators to proper level and add always-on when needed. 3. Extend the Exynos5260: high speed I2C and proper external interrupts. Also fix shared external interrupt line and use better PLL for MMC clocks. 4. Fix audio recording (broken around v5.1) and microphone recording (since v4.14) on Exynos5422 Odroid XU3 boards. 5. Minor cleanups (stdout-path and bootargs). * tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Remove console argument from bootargs ARM: dts: exynos: Use stdout-path property instead of console in bootargs ARM: dts: exynos: Fix spelling mistake of EXYNOS5420 ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3 ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa ARM: dts: exynos: Extend the eMMC node on Arndale Octa ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa ARM: dts: exynos: Fix audio routing on Odroid XU3 ARM: dts: exynos: Enable ADC on Arndale Octa ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260 ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260 ARM: dts: exynos: Add high speed I2C ports for Exynos5260 ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260 ARM: dts: exynos: Order nodes alphabetically in Arndale Octa ARM: dts: exynos: Add CPU cooling on Arndale Octa ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board ARM: dts: exynos: Use stdout path property on Arndale Octa board ARM: dts: exynos: Document regulator used by ADC on Odroid U3 ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'stm32-dt-for-v5.2-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.2, round 1 Highlights: ---------- MPU part: - Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add sysconfig clock support on stm32mp157c. - Add romem and temperature calibration support on stm32mp157c. - Add SPDIFRX support on stm32mp157c. - Enable CEC on stm32mp157a-dk1/dk2. MCU part: - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. - Add romem and temperature calibration support on stm32f429 (and so stm32f469). - Enable stm32f769 clock driver * tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: enable cec on stm32mp157a-dk1 board ARM: dts: stm32: add cec pins muxing on stm32mp157 ARM: dts: stm32: add ltdc pins muxing on stm32mp157 ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157 ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 ARM: dts: stm32: Enable STM32F769 clock driver ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board ARM: dts: stm32: add spdfirx pins to stm32mp157c ARM: dts: stm32: add spdifrx support on stm32mp157c ARM: dts: stm32: Add romem and temperature calibration on stm32f429 ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c ARM: dts: stm32: Add clock on stm32mp157c syscfg ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1 ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1 ARM: dts: stm32: add IPCC mailbox support on STM32MP157c ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'aspeed-5.2-devicetree' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.2 - RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs * tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: witherspoon: Update BMC partitioning ARM: dts: aspeed: cmm: enable iio-hwmon-adc ARM: dts: aspeed: tiogapass: Enable VUART ARM: dts: aspeed-g5: Add video engine ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: witherspoon: Enable vhub ARM: dts: aspeed: palmetto: Fix flash_memory region ARM: dts: aspeed: ast2500: Update flash layout Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts32-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Quite a bit of love for the rk3288-veyron chromeos devices and a number of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. * tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808 ARM: dts: rockchip: add rk3066 hdmi nodes ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty ARM: dts: rockchip: Add vdd_logic to rk3288-veyron ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288 ARM: dts: rockchip: Enable WiFi on rk3288-tinker ARM: dts: rockchip: add grf reference in rk3288 tsadc node ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2 - add GPIO line names for odroid-c1 boards - support internal clock measure driver * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add the GPIO line names ARM: dts: meson8b: add the internal clock measurer ARM: dts: meson8: add the internal clock measurer Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-defconfig' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/defconfig ARM: defconfig: Amlogic updates for v5.2 - multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers * tag 'amlogic-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A small number of ARM fixes - Fix function tracer and unwinder dependencies so that we don't end up building kernels that will crash - Fix ARMv7M nommu initialisation (missing register initialisation) - Fix EFI decompressor entry (ensuring barrier instructions are enabled prior to use)" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled ARM: fix function graph tracer and unwinder dependencies
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 10:15:15 +0000