summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2023-05-30ARM: dts: qcom: msm8226: Add IMEM nodeMatti Lehtimäki
This enables userspace to signal the bootloader to go into the bootloader or recovery mode. The magic values can be found in both the downstream kernel and the LK kernel (bootloader). Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230520121933.15533-5-matti.lehtimaki@gmail.com
2023-05-30ARM: dts: qcom: msm8226: Add rpm-stats device nodeMatti Lehtimäki
Add device node for the rpm-stats pseudo device. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230520121933.15533-4-matti.lehtimaki@gmail.com
2023-05-30ARM: dts: qcom: msm8226: Add PMU nodeMatti Lehtimäki
Enable perf events on MSM8226 devices by adding the PMU node. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230520121933.15533-3-matti.lehtimaki@gmail.com
2023-05-30ARM: dts: qcom: sdx65-mtp: Enable PCIe EPRohit Agarwal
Enable PCIe Endpoint controller on the SDX65 MTP board based on Qualcomm SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1684432073-28490-6-git-send-email-quic_rohiagar@quicinc.com
2023-05-30ARM: dts: qcom: sdx65-mtp: Enable PCIe PHYRohit Agarwal
Enable PCIe PHY on SDX65 MTP for PCIe EP. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1684432073-28490-5-git-send-email-quic_rohiagar@quicinc.com
2023-05-30ARM: dts: qcom: sdx65: Add support for PCIe EPRohit Agarwal
Add support for PCIe Endpoint controller on the Qualcomm SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1684432073-28490-4-git-send-email-quic_rohiagar@quicinc.com
2023-05-30ARM: dts: qcom: sdx65: Add support for PCIe PHYRohit Agarwal
Add devicetree support for PCIe PHY used in SDX65 platform. This PHY is used by the PCIe EP controller. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1684432073-28490-3-git-send-email-quic_rohiagar@quicinc.com
2023-05-30ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindingsKrzysztof Kozlowski
Bindings expect WCNSS Bluetooth child to be named "bluetooth": remoteproc@fb204000: smd-edge:wcnss: 'bt' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230421195437.31513-1-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: apq8084: correct thermal sensor unit-addressKrzysztof Kozlowski
Match unit-address to reg entry to fix dtbs W=1 warnings: Warning (simple_bus_reg): /soc/thermal-sensor@fc4a8000: simple-bus unit address format error, expected "fc4a9000" Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-10-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: msm8960-cdp: move regulator out of simple-busKrzysztof Kozlowski
Regulators is not a bus, so drop incomplete simple-bus usage to fix dtbs W=1 warning: Warning (simple_bus_reg): /regulators/gpio-regulator: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-9-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-busKrzysztof Kozlowski
Regulators is not a bus, so drop incomplete simple-bus usage to fix dtbs W=1 warnings: Warning (simple_bus_reg): /regulators/regulator-fixed: missing or empty reg/ranges property Warning (simple_bus_reg): /regulators/xc622a331mrg: missing or empty reg/ranges property Warning (simple_bus_reg): /regulators/nds332p: missing or empty reg/ranges property Warning (simple_bus_reg): /regulators/txb0104rgyr: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-8-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: ipq8064: align USB node names with bindingsKrzysztof Kozlowski
Bindings expect USB controller node names to be named "usb". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-7-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: ipq8064: correct LED node namesKrzysztof Kozlowski
GPIO LEDs is not a bus, so drop unit-address and also start suffix numbering from 0: Warning (unit_address_vs_reg): /soc/leds/led@7: node has a unit name, but no reg or ranges property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-6-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-addressKrzysztof Kozlowski
GCC comes with syscon compatible so the thermal-sensor child node should not have unit-address (bindings also do not expect it): Warning (unit_address_vs_reg): /soc/clock-controller@900000/thermal-sensor@900000: node has a unit name, but no reg or ranges property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-5-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: ipq8064: drop leading 0 from unit-addressKrzysztof Kozlowski
Unit-address should not start with 0: Warning (simple_bus_reg): /soc/syscon@03000000: simple-bus unit address format error, expected "3000000" Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-4-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: msm8974: correct pronto unit-addressKrzysztof Kozlowski
Match unit-address to reg entry to fix dtbs W=1 warnings: Warning (simple_bus_reg): /soc/remoteproc@fb21b000: simple-bus unit address format error, expected "fb204000" Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-3-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: sdx55: correct rsc unit-addressKrzysztof Kozlowski
Match unit-address to reg entry to fix dtbs W=1 warnings: Warning (simple_bus_reg): /soc/rsc@17840000: simple-bus unit address format error, expected "17830000" Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-2-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: ipq4019: correct syscon unit-addressKrzysztof Kozlowski
Match unit-address to reg entry to fix dtbs W=1 warnings: Warning (simple_bus_reg): /soc/syscon@1fcb000: simple-bus unit address format error, expected "1fc0000" Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-1-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: ipq4019: fix broken NAND controller properties overrideKrzysztof Kozlowski
After renaming NAND controller node name from "qpic-nand" to "nand-controller", the board DTS/DTSI also have to be updated: Warning (unit_address_vs_reg): /soc/qpic-nand@79b0000: node has a unit name, but no reg or ranges property Cc: <stable@vger.kernel.org> Fixes: 9e1e00f18afc ("ARM: dts: qcom: Fix node name for NAND controller node") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420072811.36947-1-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: msm8974: drop unit addresses from USB physKrzysztof Kozlowski
The ulpi node does not allow children to have unit address: Warning (unit_address_vs_reg): /soc/usb@f9a55000/ulpi/phy@a: node has a unit name, but no reg or ranges property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420065318.23503-1-krzysztof.kozlowski@linaro.org
2023-05-30ARM: dts: qcom: msm8660: Fix regulator node namesLinus Walleij
commit 04715461abf7 altered the node names in a DTSI file used by qcom-apq8060-dragonboard.dts breaking the board. Align the node names in the DTS file and the board boots again. Cc: stable@vger.kernel.org Fixes: 85055a1eecc1 ("ARM: dts: qcom-msm8660: align RPM regulators node name with bindings") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230414135747.34994-1-linus.walleij@linaro.org
2023-05-30ARM: dts: s5pv210: Fix typo in comments, fix pinctrl headerArtur Weber
Change 'specfic' to 'specific' and make the pinctrl DTSI header more like the s3c64xx pinctrl DTSI (previously it was copied from the main s5pv210 DTSI, and not changed to match the new contents). Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20230519190625.7844-4-aweber.kernel@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-30ARM: dts: s3c64xx: Fix some typos in commentsArtur Weber
Change 'specfic' to 'specific'. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20230519190625.7844-3-aweber.kernel@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-30ARM: dts: exynos: Fix some typos in commentsArtur Weber
Change 'specfic' to 'specific', 'optiosn' to 'options' and remove duplicated 'are listed' in DTSI heading comments. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20230519190625.7844-2-aweber.kernel@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-30ARM: dts: stm32: fix ltdc warnings in stm32mp15 boardsRaphael Gallais-Pou
Those concern: * "#size-cells" and "#address-cells" wrongly used * residual "reg" property appearing on endpoints where it could be avoided Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-05-30ARM: dts: stm32: fix dsi warnings on stm32mp15 boardsRaphael Gallais-Pou
Fixes DSI related warnings: * "#size-cells" and "#address-cells" wrongly used * Changed 'panel-dsi@0' to 'panel@0' according to dsi-controller.yaml Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-05-30ARM: dts: stm32: fix warnings on stm32f469-disco boardRaphael Gallais-Pou
Several warnings appear when building and checking stm32f429 device-tree: arch/arm/boot/dts/stm32f469-disco.dts:182.28-184.5: Warning (unit_address_vs_reg): /soc/display-controller@40016800/port/endpoint@0: node has a unit name, but no reg or ranges property .../arch/arm/boot/dts/stm32f469-disco.dtb: dsi@40016c00: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected) From schema: .../Documentation/devicetree/bindings/display/st,stm32-dsi.yaml Fix those. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-05-30ARM: s3c: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20230526214003.2134595-1-u.kleine-koenig@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-30ARM: dts: stm32: Shorten the AV96 HDMI sound card nameMarek Vasut
Fix the following error in kernel log due to too long sound card name: " asoc-audio-graph-card sound: ASoC: driver name too long 'STM32MP1-AV96-HDMI' -> 'STM32MP1-AV96-H' " Fixes: e027da342772 ("ARM: dts: stm32: Add bindings for audio on AV96") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-05-29ARM: mm: Make virt_to_pfn() a static inlineLinus Walleij
Making virt_to_pfn() a static inline taking a strongly typed (const void *) makes the contract of a passing a pointer of that type to the function explicit and exposes any misuse of the macro virt_to_pfn() acting polymorphic and accepting many types such as (void *), (unitptr_t) or (unsigned long) as arguments without warnings. Doing this is a bit intrusive: virt_to_pfn() requires PHYS_PFN_OFFSET and PAGE_SHIFT to be defined, and this is defined in <asm/page.h>, so this must be included *before* <asm/memory.h>. The use of macros were obscuring the unclear inclusion order here, as the macros would eventually be resolved, but a static inline like this cannot be compiled with unresolved macros. The naive solution to include <asm/page.h> at the top of <asm/memory.h> does not work, because <asm/memory.h> sometimes includes <asm/page.h> at the end of itself, which would create a confusing inclusion loop. So instead, take the approach to always unconditionally include <asm/page.h> at the end of <asm/memory.h> arch/arm uses <asm/memory.h> explicitly in a lot of places, however it turns out that if we just unconditionally include <asm/memory.h> into <asm/page.h> and switch all inclusions of <asm/memory.h> to <asm/page.h> instead, we enforce the right order and <asm/memory.h> will always have access to the definitions. Put an inclusion guard in place making it impossible to include <asm/memory.h> explicitly. Link: https://lore.kernel.org/linux-mm/20220701160004.2ffff4e5ab59a55499f4c736@linux-foundation.org/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-27ARM: dts: vf610: ZII: Add missing phy-mode and fixed linksAndrew Lunn
The DSA framework has got more picky about always having a phy-mode for the CPU port. The Vybrid FEC is a Fast Ethrnet using RMII. Additionally, the cpu label has never actually been used in the binding, so remove it. Lastly, for DSA links between switches, add a fixed-link node indicating the expected speed/duplex of the link. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6qdl-icore-rqs: Use the 'vmmc-supply' propertyFabio Estevam
'vmcc-supply' is not a valid property. Use 'vmmc-supply' supply instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: vfxxx: Remove invalid wdog propertyFabio Estevam
The 'clock-names' property is not a valid property for wdog. Remove it to fix the following DT check warning: vf610-zii-ssmb-dtu.dtb: watchdog@4003e000: Unevaluated properties are not allowed ('clock-names' was unexpected) From schema: /Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx35: Remove invalid wdog propertyFabio Estevam
The 'clock-names' property is not a valid property for wdog. Remove it to fix the following DT check warning: watchdog@53fdc000: Unevaluated properties are not allowed ('clock-names' was unexpected) From schema: Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx7d-flex-concentrator: Remove invalid ecspi propertyFabio Estevam
The 'num-chipselects' property is not a valid property for ecspi. Remove it to fix the following DT check warning: spi@30630000: Unevaluated properties are not allowed ('num-chipselects' was unexpected) From schema: Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6ull-phytec-tauri: Remove invalid propertyFabio Estevam
The 'rs485-rts-active-high' property is not a valid property and is not documented anywhere. Remove it to fix the following DT schema warning: serial@21f0000: Unevaluated properties are not allowed ('rs485-rts-active-high' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx7d-smegw01: Pass Ethernet aliasesFabio Estevam
Pass Ethernet aliases, so that the bootloader can properly pass MAC address to Linux. This fixes the problem of getting a random MAC address for eth1 in Linux. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx7d-smegw01: Use pinctrl-0 for pinctrl_rfkillFabio Estevam
Use pinctrl-0 for pinctrl_rfkill to fix the following 'make CHECK_DTBS=y imx7d-smegw01.dtb' warning: regulator-wlan-rfkill: 'pinctrl-0' is a dependency of 'pinctrl-names' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx7d-smegw01: Pass 'gpr' to the pinctrl groupsFabio Estevam
Pass 'gpr' to the pinctrl groups to fix the following 'make CHECK_DTBS=y imx7d-smegw01.dtb' warning: pinctrl@30330000: 'rfkillrp', 'usbotg1', 'usbotg1-pwr', 'usbotg1-pwr-gpio' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx7d-smegw01: Remove unneeded #address-cells/#size-cellsFabio Estevam
Remove the unneeded #address-cells/#size-cells from sram@0 to fix the following 'make CHECK_DTBS=y imx7d-smegw01.dtb' warning: sram@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) From schema: Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6qdl-gw5912: remove invalid nodes from fan-controllerTim Harvey
Remove the invalid #address-cells and #size-cells nodes from the fan-controller. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6qdl-gw54xx: remove invalid nodes from fan-controllerTim Harvey
Remove the invalid #address-cells and #size-cells nodes from the fan-controller. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6sx: Add LDB supportFabio Estevam
i.MX6SX has an LVDS controller that is connected to the eLCDIF. Add support for it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO configOtavio Salvador
The KERNEL_GZIP is used in most config and is the default, there is no clear reason to diverge so let default be used. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6sll-evk: avoid underscores in node nameHaibo Chen
usdhc1 and usdhc3 node name contain underscores, so replace the '_' by '-'. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6sll-evk: add eMMC node supportHaibo Chen
On imx6sll-evk board, eMMC is connect on the usdhc2. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6qdl: Add HDMI to TQMa6x/MBa6Alexander Stein
This adds support for a COTS monitor connected to X17. 4k monitors can be used, but are limited to 1080p. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-27ARM: dts: imx6qdl-mba6: add mac address for USB ethernet controllerAlexander Stein
The mac address is stored in mainboard eeprom. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-26mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATEDVlastimil Babka
As discussed at LSF/MM [1] [2] and with no objections raised there, deprecate the SLAB allocator. Rename the user-visible option so that users with CONFIG_SLAB=y get a new prompt with explanation during make oldconfig, while make olddefconfig will just switch to SLUB. In all defconfigs with CONFIG_SLAB=y remove the line so those also switch to SLUB. Regressions due to the switch should be reported to linux-mm and slab maintainers. [1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/ [2] https://lwn.net/Articles/932201/ Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: Helge Deller <deller@gmx.de> # parisc
2023-05-26Merge tag 'gpio-omap-descriptors-v6.5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into soc/arm This removes all usage of global GPIO numbers from arch/arm/mach-omap[12]. The patches have been reviewed and tested by everyone who showed interest which was one person that tested on OSK1 and Nokia 770, and we smoked out the bugs and also addressed all review comments. Any remaining problems can certainly be fixed in-tree. * tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: ARM/musb: omap2: Remove global GPIO numbers from TUSB6010 ARM: omap2: Rewrite WLAN quirk to use GPIO descriptors ARM: omap2: Get USB hub reset GPIO from descriptor ARM/gpio: Push OMAP2 quirk down into TWL4030 driver ARM: omap1: Exorcise the legacy GPIO header ARM: omap1: Make serial wakeup GPIOs use descriptors ARM: omap1: Fix up the Nokia 770 board device IRQs ARM/mmc: Convert old mmci-omap to GPIO descriptors Input: ads7846 - Convert to use software nodes ARM: omap1: Remove reliance on GPIO numbers from SX1 ARM: omap1: Remove reliance on GPIO numbers from PalmTE ARM: omap1: Drop header on AMS Delta ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 21:27:16 +0000