summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2017-08-18Merge tag 'arm-soc/for-4.14/devicetree' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs Device Tree changes for 4.14, please pull the following: - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance problem and would have required either duplication or cross merges - Stefan changes how the pinmuxing is defined and pushes it at the board level to support Raspberry Pi Zero Wireless. He then adds supports for the actual Raspberry Pi Zero Wireless board along with binding documentation. Stefan also defines a proper SMP enable-method property and binding for BCM2836 (Raspbery Pi 2) - Rafal describes the BCM5301X USB ports correctly in Device Tree such that it becomes possible to assign them to specific LED triggers (e.g: USB activity). He does the same thing for BCM53573 and defines default LED triggers for USB. - Jon provides a fix for Northstar Plus which consists in correctly defining the "dma-coherent" property for peripherals which are DMA coherent. He also does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY and host controller support for NorthStar Plus - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is based on BCM47182/53573 and which supports external MoCA (BCM6802) - Ray fixes the wrong UART2 base address for Cygnus - Scott moves the v3d node in the proper unit address order and defines the correct UART alias for the BCM91130_entphn reference board to be UART3 - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: SDHCI, Keypad, SPI, DMA and pinmux configurations - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes * tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux: ARM: BCM53573: Specify ports for USB LED for Tenda AC9 ARM: dts: cygnus: Add generic-ehci/ohci nodes ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn ARM: dts: cygnus: Add additional peripherals to dtsi ARM: dts: cygnus: Enable Performance Monitoring Unit ARM: dts: cygnus: place v3d in proper address ordered location ARM: dts: cygnus: Fix incorrect UART2 register base ARM: dts: bcm283x: Add 32-bit enable method for SMP dt-bindings: arm: add SMP enable-method for BCM2836 ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices ARM: dts: NSP: Add USB3 and USB3 PHY to NSP ARM: dts: NSP: Rearrage USB entries ARM: dts: NSP: Add dma-coherent to relevant DT entries ARM: dts: bcm2835: Add Raspberry Pi Zero W dt-bindings: bcm: Add Raspberry Pi Zero W ARM: bcm283x: Define UART pinmuxing on board level ARM: dts: BCM5301X: Specify USB ports for each controller ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.
2017-08-18Merge tag 'omap-for-v4.14/dt-v3-pt2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "device tree changes for omaps for v4.14, part2" from Tony Lindgren: Second set of device tree changes for omaps for v4.14 merge window. These got delayed a bit because the iodelay changes had to be reworked for a missing Signed-off-by. And the beagleboard-x15 wants to use iodelay too for mmc: - A series of changes to add dra7 iodelay data used for mmc - Add support for new beagleBoard-x15 revision c - Fix logicpd-torpedo-37xx-devkit mmc card detect direction * tag 'omap-for-v4.14/dt-v3-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpio ARM: dts: am57xx-beagle-x15: Add support for rev C ARM: dts: dra71-evm: Add pinmux configuration for MMC ARM: dts: dra72-evm-revc: Add pinmux configuration for MMC ARM: dts: dra72-evm: Add pinmux configuration for MMC ARM: dts: am572x-idk: Add pinmux configuration for MMC ARM: dts: am571x-idk: Add pinmux configuration for MMC ARM: dts: am57xx-idk: Move common MMC/SD properties to common file ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMC ARM: dts: dra7-evm: Add pinmux configuration for MMC ARM: dts: dra74x: Create a common file with MMC/SD IOdelay data ARM: dts: dra72x: Create a common file with MMC/SD IOdelay data
2017-08-18Merge tag 'tegra-for-4.14-arm-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig Pull "ARM: tegra: Default configuration updates for v4.14-rc1" from Thierry Reding: Enables the ChipIdea UDC driver and selects some symbols that were previously being selected by other drivers but will no longer be in v4.14. * tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1
2017-08-18Merge tag 'imx-defconfig-4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig Pull "i.MX defconfig updates for 4.14" from Shawn Guo: - Enable SPI_GPIO and GPIO_74X164 support which are useful for some boards like imx7d-sabresd. - Enable build of CODA video codec and staging video4linux drivers. * tag 'imx-defconfig-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers ARM: imx_v6_v7_defconfig: Select the coda driver as module ARM: imx_v6_v7_defconfig: Enable GPIO_74X164 ARM: imx_v6_v7_defconfig: Enable SPI_GPIO
2017-08-18Merge tag 'arm-soc/for-4.14/defconfig' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/defconfig Pull "Broadcom defconfig changes for 4.14" from Florian Fainelli: This pull request contains defconfig file changes for Broadcom ARM-based SoCs for 4.14, please pull the following: - Markus enables the Broadcom STB AVS thermal monitoring driver as a module which is currently queued in Rui Zhang's tree - Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI mini UART is enabled by default, the default CMA pool is bumped up to 32MB to support VC4 usages and finally BRCMFMAC is enabled as module since this is the wireless driver used on Raspberry Pi Zero Wireless. * tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL ARM: bcm2835_defconfig: Enable wifi driver for RPi Zero W ARM: bcm2835_defconfig: Increase CMA for VC4 ARM: bcm2835_defconfig: Enable Mini UART console support
2017-08-18Merge tag 'renesas-defconfig2-for-v4.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Pull "Second Round of Renesas ARM Based SoC Defconfig Updates for v4.14" from Simon Horman: * Enable BQ32000 rtc in shmobile_defconfig Biju Das says "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration." * tag 'renesas-defconfig2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig
2017-08-18Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A small number of bugfixes, nothing serious this time. Here is a full list. 4.13 regression fix: - imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete patch DT fixes for recently added devices: - badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset - sama5d2 memory controller had the wrong ID and registers - imx7 power domains did not work correctly with deferred probing (driver added in 4.12) - Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO interrupts Fixes for older bugs that just got noticed: - i.MX25 ADC support (added in 4.6) apparently never worked right due to a missing 'ranges' property in DT. - Renesas Salvador Audio support (added in v4.5) was broken for device repeated bind/unbind due to a naming conflict. - Various allwinner boards are missing an 'ethernet' alias in DT, leading to unstable device naming. Preventive bugfix: - TI Keystone needs a fix to prevent a NULL pointer dereference with an upcoming PM change" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: ti: ti_sci_pm_domains: Populate name for genpd ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias arm64: renesas: salvator-common: avoid audio_clkout naming conflict ARM: dts: i.MX25: add ranges to tscadc soc: imx: gpcv2: fix regulator deferred probe ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
2017-08-19ARM: sun8i: a83t: h8homlet-v2: Enable USB portsChen-Yu Tsai
The h8homlet board has the A83T's standard USB 1.1/2.0 host pair routed to a USB host port on the board. The other USB host port is routed to USB OTG controller. Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-19ARM: sun8i: a83t: cubietruck-plus: Enable onboard USB peripheralsChen-Yu Tsai
The Cubietruck-plus has a GL830 USB-to-SATA bridge connected to EHCI0, and a USB3503 HSIC USB 2.0 hub connected to EHCI1. The USB3503's I2C control interface is not connected. This patch enables both EHCI controllers, adds a device node for the USB hub, and includes sunxi-common-regulators.dtsi for the VBUS regulators. The existing reg_vcc3v3 is dropped as it is also available in the set of common regulators. Other unused regulators are disabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-19ARM: sun8i: a83t: Add device node for USB OTG controllerChen-Yu Tsai
The USB OTG controller found on the A83T is compatible with the one found on the A33. Add a device node for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-19ARM: sun8i: a83t: Add USB PHY and host device nodesChen-Yu Tsai
The A83T has 3 USB PHYs, 1 for USB OTG, 1 for standard USB 2.0, 1 for USB HSIC. EHCI0/OHCI0 are the standard USB host pair, while EHCI1 is the host controller for HSIC. OTG is not added yet. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-18Merge tag 'imx-fixes-4.13-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.13, round 3" from Shawn Guo: - Fix PCIe reset GPIO of imx6qdl-nitrogen6_som2 board, which was a bad copy from nitrogen6_max device tree. * tag 'imx-fixes-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
2017-08-18irqchip/hip04: Report that effective affinity is a single targetMarc Zyngier
The HIP04 driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-11-marc.zyngier@arm.com
2017-08-18ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe resetGary Bisson
Previous value was a bad copy of nitrogen6_max device tree. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-17ARM: BCM53573: Specify ports for USB LED for Tenda AC9Rafał Miłecki
This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings: leds: document new trigger-sources property") to specify USB ports. Such an information can be used by operating system to setup LEDs behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-17ARM: dts: cygnus: Add generic-ehci/ohci nodesRaveendra Padasalagi
Add dt nodes for generic-ehci/ohci host controller. Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-17ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphnScott Branden
Use serial0 alias to select stdout-path on Cygnus bcm911360_entphon board. Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-17ARM: dts: cygnus: Add additional peripherals to dtsiJonathan Richardson
Add nodes for peripherals in Cygnus dtsi: sdhci, keypad, spi, dma, pinmux configs. Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-17ARM: dts: cygnus: Enable Performance Monitoring UnitJason Uy
Add PMU capability to Cygnus so trace and performance profiling can be used. Signed-off-by: Jason Uy <jason.uy@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-17ARM: dts: cygnus: place v3d in proper address ordered locationScott Branden
Move v3d devicetree node to proper address ordered location in Cygnus dtsi. Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-17ARM: dts: cygnus: Fix incorrect UART2 register baseRay Jui
Fix incorrect Cygnus UART2 register base. Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus") Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-17ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpioAdam Ford
Fixes commit 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") This patch corrects an issue where the cd-gpios was improperly setup using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-17ARM: dts: am57xx-beagle-x15: Add support for rev CRobert Nelson
Latest update to the BeagleBoard-X15 platform (revision C). This board contains a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when running at 1000 Mbps speeds. This board can be indentified by the [C.00] after [BBRDX15_] in the at24 eeprom: [BBRDX15_C.001731PX150249] Rev C is now in full production and boards are available for end users. https://beagleboard.org/x15 https://github.com/beagleboard/beagleboard-x15/ Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Nishanth Menon <nm@ti.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-17arch: Remove spin_unlock_wait() arch-specific definitionsPaul E. McKenney
There is no agreed-upon definition of spin_unlock_wait()'s semantics, and it appears that all callers could do just as well with a lock/unlock pair. This commit therefore removes the underlying arch-specific arch_spin_unlock_wait() for all architectures providing them. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: <linux-arch@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Boqun Feng <boqun.feng@gmail.com>
2017-08-17soc/tegra: Register SoC deviceThierry Reding
Move this code from arch/arm/mach-tegra and make it common among 32-bit and 64-bit Tegra SoCs. This is slightly complicated by the fact that on 32-bit Tegra, the SoC device is used as the parent for all devices that are instantiated from device tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: tegra: Enable UDC on AC100Dmitry Osipenko
Override the compatible string of the first USB controller to enable device mode. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: tegra: Enable UDC on Jetson TK1Thierry Reding
Override the compatible string of the first USB controller to enable device mode. Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: tegra: Enable UDC on DalmoreThierry Reding
Override the compatible string of the first USB controller to enable device mode. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: tegra: Enable UDC on BeaverThierry Reding
Override the compatible string of the first USB controller to enable device mode. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: defconfig: tegra: Enable ChipIdea UDC driverDmitry Osipenko
Since NVIDIA Tegra is supported now by the ChipIdea USB driver, let's enable this driver in tegra_defconfig. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfigPaul Kocialkowski
This selects both the Tegra20 and Tegra30 I2S interfaces (that were previously auto-selected by Kconfig but are not anymore) to multi_v7_defconfig, as modules. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: tegra: Add Tegra I2S interfaces to defconfigPaul Kocialkowski
This selects both the Tegra20 and Tegra30 I2S interfaces (that were previously auto-selected by Kconfig but are not anymore) to tegra_defconfig, as built-ins. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17ARM: tegra: Update default configuration for v4.13-rc1Thierry Reding
Regenerate the default configuration on top of v4.13-rc1. This shuffles around a couple of symbols and drops some that have become defaults or which were dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17Merge tag 'keystone_config_4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig Pull "ARM: Keystone config bits for 4.14" from Santosh Shilimkar: Enables: - Message Manager - TI SCI & GenPD driver - Reset drivers - MMC & regulators - DCAN driver * tag 'keystone_config_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: configs: keystone: Enable D_CAN driver ARM: configs: keystone: Enable MMC and regulators ARM: configs: keystone: Enable reset drivers ARM: configs: keystone: Enable TI-SCI protocol and genpd driver ARM: configs: keystone: Enable Message Manager
2017-08-17ARM: dts: r8a7791: Use R-Car SATA Gen2 fallback compat stringSimon Horman
Use newly added R-Car SATA Gen2 fallback compat string in the DT of the r8a7791 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before the fallback compat string is considered. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-17ARM: dts: r8a7790: Use R-Car SATA Gen2 fallback compat stringSimon Horman
Use newly added R-Car SATA Gen2 fallback compat string in the DT of the r8a7790 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before the fallback compat string is considered. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-17Merge tag 'amlogic-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit DT changes for v4.14" from Kevin Hilman: - update clock controler for use as reset controller - misc. updates/fixups/improvements * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson6: use stable UART bindings ARM: dts: meson: mark the clock controller also as reset controller ARM: dts: meson: add a node which describes the SRAM ARM: dts: meson8b: use the existing wdt node to override the compatible ARM: dts: meson8: add the PWM controller nodes ARM: dts: move the pwm_ab and pwm_cd nodes to meson.dtsi
2017-08-17Merge tag 'keystone_dts_for_4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Pull "ARM: Keystone DTS for 4.14" from Santosh Shilimkar: Contents: - ti-sci power domain, clock and reset controller support - DSP nodes for k2h/k2l/k2e evms - DSP CMA memory pools for k2h/k2l/k2e/keg evms - MMC/hsmmc suport for k2g - eDMA support for k2g - DCAN support for k2g * tag 'keystone_dts_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: (22 commits) ARM: dts: keystone-k2g-ice: Add and enable DSP CMA memory pool ARM: dts: keystone-k2g-evm: Add and enable DSP CMA memory pool ARM: dts: keystone-k2g: Add DSP node ARM: dts: k2g: Add DCAN nodes dt-bindings: net: c_can: Update binding for clock and power-domains property ARM: dts: keystone-k2g-evm: Enable MMC0 and MMC1 ARM: dts: keystone-k2g: add MMC0 and MMC1 nodes ARM: dts: keystone-k2g: Add eDMA nodes dt-bindings: ti,omap-hsmmc: Add 66AK2G mmc controller dt-bindings: ti,edma: Add 66AK2G specific information ARM: dts: keystone-k2g: Add gpio nodes ARM: dts: keystone-k2e-evm: Add and enable DSP CMA memory pool ARM: dts: keystone-k2l-evm: Add and enable common DSP CMA memory pool ARM: dts: keystone-k2hk-evm: Add and enable common DSP CMA memory pool ARM: dts: keystone-k2e: Add DSP node ARM: dts: keystone-k2l: Add DSP nodes ARM: dts: keystone-k2hk: Add DSP nodes ARM: dts: keystone-k2g: Add TI SCI reset-controller node ARM: dts: keystone-k2g: Add ti-sci clock provider node ARM: dts: keystone-k2g: Add ti-sci power domain node ...
2017-08-17ARM: dts: r8a7743: Add OPP table for frequency scalingBiju Das
Add needed information inside CPU0 for the generic cpufreq-cpu0 driver. - clock-latency = 300 us Approximate worst-case latency to do clock transition for every OPPs. Using an arbitrary safe value similar to r8a7791(R-Car M2) Soc. - operating-points = < kHz - uV > List of 6 operating points. All of them are using the same voltage since DVS is not supported in RZ/G1 Soc. Note:This also fixes the below errors seen on kernel logs [ 0.876877] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19) [ 0.883727] cpu cpu1: cpufreq_init: failed to get clk: -2 Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-17ARM: dts: r8a7743: Add APMU node and second CPU coreBiju Das
Add DT nodes for the Advanced Power Management Unit (APMU) and the second CPU core. Use the enable-method to point out that the APMU should be used for SMP support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-17ARM: dts: koelsch: Add CEC clock for HDMI transmitterHans Verkuil
The adv7511 on the Koelsch board has a 12 MHz fixed clock for the CEC block. Specify this in the dts to enable CEC support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-17Merge branch 'linus' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-16Merge tag 'v4.14-rockchip-soc32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc Pull "Rockchip soc32 changes for 4.14" from Heiko Stübner: 32bit arch changes for Rockchip socs containing enablement for ZONE_DMA for LPAE builds due to the peripherals only being 32bit capable and conversion to the exclusive reset controls in smp code. * tag 'v4.14-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: enable ZONE_DMA for non 64-bit capable peripherals ARM: rockchip: explicitly request exclusive reset control in smp code
2017-08-16Merge tag 'qcom-dts-for-4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Pull "Qualcomm Device Tree Changes for v4.14" from Andy Gross: * Fixup XO, timer nodes, and pinctrl on IPQ4019 * Add IPQ4019 RNG and wifi blocks * Update MSM8974 coresight node * Add IPQ8074 bindings * tag 'qcom-dts-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: add and enable both wifi blocks on the IPQ4019 ARM: dts: qcom-msm8974: dts: Update coresight replicator ARM: dts: qcom: add pseudo random number generator on the IPQ4019 ARM: dts: ipq4019: Move xo and timer nodes to SoC dtsi ARM: dts: ipq4019: Fix pinctrl node name dt-bindings: qcom: Add IPQ8074 bindings
2017-08-16Merge tag 'uniphier-dt-v4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt Pull "UniPhier ARM SoC DT updates for v4.14" from Masahiro Yamada: - complete migrating to SPDX License Identifier - remove support for old SoC - add nodes for NAND, Audio pinctrl - replace /include/ with #include * tag 'uniphier-dt-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add Denali NAND controller node ARM: dts: uniphier use #include instead of /include/ ARM: dts: uniphier: remove sLD3 SoC support ARM: dts: uniphier: add audio out pin-mux node ARM: dts: uniphier: use SPDX-License-Identifier (2nd)
2017-08-16Merge tag 'omap-for-v4.14/dt-v3-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Device tree changes for omaps for v4.14 merge window" from Tony Lindgren: - A series of changes for dra7 and am572 to use generic MMC vqmmc regulator - Clean-up tps65217 internal interrupts to define them only in tps65217.dtsi - Add dra7 iodelay pinctrl driver configuration - Add buzzer support for am437x-gp-evm - Disable HDMI CEC internal pull-ups as it seems that all boards have an external pull for these - Remove unnecessary interrupt-parent for omap3 - Configure droid 4 vaudio regulator initial mode and add vibrator - Enable NAND dma prefetch for am335x-evm, am437x and dra7 - Add pcie1 dt node for EP mode for am57x and dra7 - Add support for new dra76x SoCs and dra76x-evm * tag 'omap-for-v4.14/dt-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits) ARM: dts: nokia n900: update dts with camera support ARM: dts: Add support for dra76-evm ARM: dts: Add support for dra76x family of devices ARM: dts: DRA7: Add pcie1 dt node for EP mode ARM: dts: am335x: add support for Moxa UC-8100-ME-T open platform ARM: dts: dra7xx: Enable NAND dma prefetch by default ARM: dts: am437xx: Enable NAND dma prefetch by default ARM: dts: am335x-evm: Enable NAND dma prefetch by default ARM: dts: omap4-droid4: Add vibrator ARM: dts: motorola-cpcap-mapphone: set initial mode for vaudio ARM: dts: omap3: Remove needless interrupt-parent property ARM: dts: Disable HDMI CEC internal pull-ups ARM: dts: am437x-gp-evm: Add support for buzzer ARM: dts: Add dra7 iodelay configuration ARM: dts: tps65217: Add power button interrupt to the common tps65217.dtsi file ARM: dts: tps65217: Add charger interrupts to the common tps65217.dtsi file ARM: dts: omap*: Replace deprecated "vmmc_aux" with "vqmmc" ARM: dts: am572x-idk: Fix GPIO polarity for MMC1 card detect ARM: dts: am571x-idk: Fix GPIO polarity for MMC1 card detect ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes ...
2017-08-16Merge tag 'mvebu-dt-4.14-1' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann
Pull "mvebu dt for 4.14 (part 1)" from Gregory CLEMENT: Add arm_global_timer node on Armada 38x Fix PCI bus dtc warnings on mvebu 32 bits device tree files * tag 'mvebu-dt-4.14-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: Add arm_global_timer node ARM: dts: marvell: fix PCI bus dtc warnings
2017-08-16Merge tag 'gemini-dts-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt Pull "Gemini DTS updates for ARM SoC take one" from Linus Walleij: * tag 'gemini-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: add pin control set-up for the SoC ARM: dts: Add DTS file for D-Link DIR-685 ARM: dts: gemini: Switch to using macros
2017-08-16Merge tag 'sunxi-dt-for-4.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner dts changes for 4.14" from Chen-Yu Tsai: The usual improvement patches: - R_INTC interrupt controller compatible string update and device node addition - Battery charger enabled on the Cubietruck - New board: Bananapi M2 Magic - Ethernet and USB OTG enabled on the Beelink X2 - MMC enabled for A83T boards * tag 'sunxi-dt-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMC ARM: dts: sun8i: a83t: Add pingroup for 8-bit eMMC on mmc2 ARM: dts: sun8i: a83t: Add MMC controller device nodes ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2 ARM: dts: sun8i: h3: Enable USB OTG on the Beelink X2 ARM: dts: sun8i: Add BananaPI M2-Magic DTS ARM: dts: sun7i: enable battery power supply subnode on cubietruck ARM: dts: sun8i: a83t: Add device node for R_INTC interrupt controller ARM: dts: sun8i: a23/a33: Use new sun6i-a31-r-intc compatible for NMI/R_INTC ARM: dts: sun6i: a31: Use new sun6i-a31-r-intc compatible for NMI/R_INTC
2017-08-16Merge tag 'v4.14-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 changes for 4.14" from Heiko Stübner: Removal of the deprectated num-slots property from all Rockchip dw-mmc nodes. The rv1108 gains support for sd-cards on the evaluation board and the general nodes get a bit of cosmetic. On rk3288 the evb gains support saradc and the adc-key connected to it while some more boards also get their mali gpu enabled (fennec, evb, tinker). The biggest set of changes can be found on the rk3228/rk3229 combo this time. It gets core support for efuse, sdmmc, sdio, io-domans and spdif as well as a separate rk3229.dtsi that will keep the slight differences between the two brothers rk3228/rk3229. The evaluation board also gets some attention and abled nodes (regulators, io-domains, emmc, tsadc keys) But I think the most interesting change is the cpu enable-method for it. Instead of using the older in-kernel method, we're now also moving to handling this in firmware via the psci interface on 32bit Rockchip socs. In a recently merged pull request [0] support for the rk3228/rk3229 was added to OP-TEE including the psci support and it seems supporting other 32bit Rockchip socs that way is also planned for the future. [0] https://github.com/OP-TEE/optee_os/pull/1666 * tag 'v4.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits) ARM: dts: rockchip: fix property-ordering in rv1108 mmc nodes ARM: dts: rockchip: enable sdmmc for rv1108 evb ARM: dts: rockchip: add efuse device node for rk3228 ARM: dts: rockchip: add gpio power-key for rk3229-evb ARM: dts: rockchip: enable tsadc for rk3229-evb ARM: dts: rockchip: enable eMMC for rk3229-evb ARM: dts: rockchip: enable io-domain for rk3229-evb ARM: dts: rockchip: add cpu-supply property for cpu node of rk3229-evb ARM: dts: rockchip: add regulator nodes for rk3229-evb ARM: dts: rockchip: add sdmmc and sdio nodes for rk3228 SoC ARM: dts: rockchip: fix compatible string for eMMC node of rk3228 SoC ARM: dts: rockchip: add cpu enable method for rk3228 SoC ARM: dts: rockchip: remove num-slots from all platforms ARM: dts: rockchip: Add io-domain node for rk3228 ARM: dts: rockchip: add basic dtsi file for RK3229 SoC ARM: dts: rockchip: enable adc key for rk3288-evb ARM: dts: rockchip: enable saradc for rk3288-evb ARM: dts: rockchip: enable ARM Mali GPU on rk3288-fennec ARM: dts: rockchip: enable ARM Mali GPU on rk3288-evb ARM: dts: rockchip: enable ARM Mali GPU on rk3288-tinker ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 22:39:48 +0000