summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2024-08-24ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO nodeManikandan Muralidharan
The driver data specific to each pinctrl GPIO bank compatible nodes are not the same and declaring additional compatible string as fallback has no specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from sam9x60 SoC DT. Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string to find the number of active GPIO banks and identify the pinmux nodes.It should used as a constant across all DT for GPIO node banks that uses PIO3 based pinctrl driver Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodesManikandan Muralidharan
The driver data specific to each pinctrl GPIO bank compatible nodes are not the same and declaring additional compatible string as fallback has no specific purpose, hence, removing the additional compatible string from the pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-3-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux ↵Manikandan Muralidharan
controller The pinctrl subnodes that define the pin configuration of other devices under PIO3 pinmux controller are not simple memory mapped nodes.Ergo, change simple-bus to simple-mfd. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-2-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24crypto: simd - Do not call crypto_alloc_tfm during registrationHerbert Xu
Algorithm registration is usually carried out during module init, where as little work as possible should be carried out. The SIMD code violated this rule by allocating a tfm, this then triggers a full test of the algorithm which may dead-lock in certain cases. SIMD is only allocating the tfm to get at the alg object, which is in fact already available as it is what we are registering. Use that directly and remove the crypto_alloc_tfm call. Also remove some obsolete and unused SIMD API. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-08-22ARM: dts: aspeed: harma: Remove pca9546Peter Yin
Remove pca9546 device from i2c bus 9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-12-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warningsPeter Yin
Revise spi-gpio node and property name and remove max-ngpios. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-11-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Enable mctp controllerPeter Yin
Enable the mctp controller in i2c9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-10-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add temperature devicePeter Yin
Add temperature device in i2c0 and i2c2. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com [andrew: Fixed 'deivce' typo in commit message] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add fru devicePeter Yin
Add Aegis fru device and gpio expander device in bus 11. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-8-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Remove multi-host propertyPeter Yin
Harma is single host, so remove multi-host property. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-7-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add power monitor xdp710Peter Yin
Add HSC xdp710 device in i2c4. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-6-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add ina238Peter Yin
Add INA238 power monitor for Harma fan board. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-5-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add sgpio namePeter Yin
Add power-chassis-control and power-chassis-power for phosphor-power. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add VR devicesPeter Yin
Add isl69260, xdpe152c4 devices. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Revise hsc chipPeter Yin
Revise HSC chip name and address to match LTC4287. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed-g6: Drop cells properties from ethernet nodesAndrew Jeffery
These are not specified in the binding and produce warnings such as the following: arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:254.27-262.5: Warning (avoid_unnecessary_addr_size): /ahb/ethernet@1e670000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:264.27-272.5: Warning (avoid_unnecessary_addr_size): /ahb/ethernet@1e690000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dtb: ethernet@1e660000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-7-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodesAndrew Jeffery
Squash warnings such as: arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dtb: ftgmac@1e670000: $nodename:0: 'ftgmac@1e670000' does not match '^ethernet(@.*)?$' Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-6-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Clean up AST2500 pinctrl propertiesAndrew Jeffery
Many platforms were specifying the `aspeed,external-nodes` property required by the AST2500 pinctrl. However, its been specified in the pinctrl node directly in aspeed-g5.dtsi for quite a long time now. Remove the unnecessary override from all relevant platform dts files. Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-5-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Remove undocumented XDMA nodesAndrew Jeffery
There's no binding defined for the device, so remove it from the devicetrees until someone has the motivation to write one. Squash warnings such as: arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb: /ahb/apb@1e6e0000/xdma@1e6e7000: failed to match any schema with compatible: ['aspeed,ast2500-xdma'] Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-4-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Specify required properties for sram nodeAndrew Jeffery
Squash warnings such as: ``` arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# ``` Fixes: d44a1138cd82 ("arm/dts: Add Aspeed ast2400 device tree") Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-3-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Specify correct generic compatible for CVICAndrew Jeffery
The ASPEED CVIC binding documents `aspeed,cvic` as the required generic compatible, but the devicetrees contained `aspeed-cvic`. Update the devictrees to use `aspeed,cvic` as documented and as required by the driver implementation. Presumably the bug was the result of some incoherent thoughts while removing the SoC name at the time of writing. Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-2-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Fix coprocessor interrupt controller node nameAndrew Jeffery
Squash schema warnings such as: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: copro-interrupt-controller@1e6c2000: $nodename:0: 'copro-interrupt-controller@1e6c2000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-1-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add LEDsChanh Nguyen
Add LED nodes as the gpio-leds devices. They are led-bmc-ready, led-sw-heartbeat, led-identify, led-fault, led-fan-fault, led-psu-fault Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-6-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15Chanh Nguyen
Enable the BMC I2C10. Enable the BMC I2C15 and add the GPIO Expander as a child node. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-5-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add Riser cardsChanh Nguyen
Define the I2C alias ports for the riser cards. Add the i2c muxes to switch to the i2c alias ports and the eeprom nodes to read the FRU contents on riser cards. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-4-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias portsChanh Nguyen
Add the I2C alias ports to read temperature sensors via channels of the I2C muxes. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-3-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensorsChanh Nguyen
Define I2C alias ports from I2C Switch 0x70 at BMC I2C5. Add the tmp421 sensors via the I2C alias ports as OCP device temperature sensors. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-2-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: catalina: add Meta Catalina BMCPotin Lai
Add linux device tree entry for Meta(Facebook) Catalina compute-tray BMC using AT2600 SoC. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240805-potin-catalina-dts-v7-2-286bfd2ab93b@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add host0-ready pinYang Chen
Add host0-ready pin for phosphor-state-manager. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240711130501.2900301-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Add spi-gpioYang Chen
Add spi-gpio for TPM device. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-18-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add ltc4287 deviceYang Chen
Enable LTC4287 device on i2c-0. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240626130332.929534-17-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: remove unused power deviceYang Chen
Remove unused power device. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240626130332.929534-16-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Switch the i2c bus numberYang Chen
Switch the i2c bus number to map the i2c tag according to the hardware design. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-15-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: revise sgpio line nameYang Chen
Revise the SGPIO naming to mapping the SGPIO from the CPLD. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-14-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add power monitor xdp710Yang Chen
Add HSC xdp710 on i2c bus0. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-13-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add tmp75 sensorYang Chen
Add tmp75 sensor on the i2c bus connect to each fan board. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-12-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: enable ehci0 for USBYang Chen
Enable ehci0 for USB. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-11-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add linename of two pinsYang Chen
Add linename of two pins for power good/control. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-10-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Add adc sensors for fan boardYang Chen
Add ina238 support to read the sensors in front of fans. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-9-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Define the LEDs node nameYang Chen
Define the LEDs node name. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-8-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: remove unused bus and deviceYang Chen
Remove unused bus and device. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-7-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: enable mdio3Yang Chen
Change usage of I2C bus 11 to mdio3. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-6-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change RTC referenceYang Chen
Change the RTC reference from on-chip to externel on i2c bus 9 and address is 0x51. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-5-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add eeprom on i2c busYang Chen
Add eeprom on the i2c-9 address 0x50 and i2c-15 address 0x56. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-4-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change aliases for uartYang Chen
Change and add aliases name for uart interface. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-3-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change the address of tmp75Yang Chen
Revise the address of tmp75 on I2C bus 1 from 0x48 to 0x4f due to design change. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-20ARM: OMAP1: Remove unused declarations in arch/arm/mach-omap1/pm.hGaosheng Cui
The omap1510_idle_loop_suspend/_sz() and omap1610_idle_loop_suspend/_sz() has been removed since commit feb72f3b313e ("ARM: OMAP1: Remove omap_sram_idle()"), so remove them. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20240813071125.1044697-1-cuigaosheng1@huawei.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-08-20ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550Artur Weber
The BCM21664 is nearly identical in terms of register layout to the BCM23550. Move the shared nodes into a new file, bcm2166x-common.dtsi, and make both bcm21664.dtsi and bcm23550.dtsi include it. This new common file is based on the former bcm23550.dtsi file, and inherits its licensing. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20240729-bcm21664-common-v2-2-ebc21a89bf63@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-08-20ARM: 9412/1: Convert to arch_cpu_is_hotpluggable()Jinjie Ruan
Convert arm32 to use the arch_cpu_is_hotpluggable() helper rather than arch_register_cpu(). Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2024-08-20ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu()Jinjie Ruan
Currently, almost all architectures have switched to GENERIC_CPU_DEVICES, except for arm32. Also switch over to GENERIC_CPU_DEVICES, and provide an arch_register_cpu() that populates the hotpluggable flag for arm32. The struct cpu in struct cpuinfo_arm is never used directly, remove it to use the one GENERIC_CPU_DEVICES provides. This also has the effect of moving the registration of CPUs from subsys to driver core initialisation, prior to any initcalls running. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 05:02:34 +0000