| Age | Commit message (Collapse) | Author |
|---|
|
We currently have a non-standard SYS_ prefix in the constants generated
for the SPE register bitfields. Drop this in preparation for automatic
register definition generation.
The SPE mask defines were unshifted, and the SPE register field
enumerations were shifted. The autogenerated defines are the opposite,
so make the necessary adjustments.
No functional changes.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-2-327f860daf28@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64DFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220910163354.860255-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The naming scheme the architecture uses for the fields in ID_AA64DFR0_EL1
does not align well with kernel conventions, using as it does a lot of
MixedCase in various arrangements. In preparation for automatically
generating the defines for this register rename the defines used to match
what is in the architecture.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220910163354.860255-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In preparation for converting the ID_AA64MMFR1_EL1 system register
defines to automatic generation, rename them to follow the conventions
used by other automatically generated registers:
* Add _EL1 in the register name.
* Rename fields to match the names in the ARM ARM:
* LOR -> LO
* HPD -> HPDS
* VHE -> VH
* HADBS -> HAFDBS
* SPECSEI -> SpecSEI
* VMIDBITS -> VMIDBits
There should be no functional change as a result of this patch.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-11-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Our standard is to include the _EL1 in the constant names for registers but
we did not do that for ID_AA64PFR1_EL1, update to do so in preparation for
conversion to automatic generation. No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-8-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64PFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64MMFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In order to be able to completely disable SVE even if the HW
seems to support it (most likely because the FW is broken),
move the SVE setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64zfr0_el1 as a byproduct, and
that SME also gets disabled, due to the dependency between the
two features.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-9-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to be able to completely disable SME even if the HW
seems to support it (most likely because the FW is broken),
move the SME setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64smfr0_el1 as a byproduct.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-8-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We currently have a non-standard SYS_ prefix in the constants generated
for SMIDR_EL1 bitfields. Drop this in preparation for automatic register
definition generation, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
SME requires similar setup to that for SVE: disable traps to EL2 and
make sure that the maximum vector length is available to EL1, for SME we
have two traps - one for SME itself and one for TPIDR2.
In addition since we currently make no active use of priority control
for SCMUs we map all SME priorities lower ELs may configure to 0, the
architecture specified minimum priority, to ensure that nothing we
manage is able to configure itself to consume excessive resources. This
will need to be revisited should there be a need to manage SME
priorities at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-8-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix typo in comment.
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Link: https://lore.kernel.org/r/1647831387-3686-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In commit:
114945d84a30a5fe ("arm64: Fix labels in el2_setup macros")
We renamed a label from '1' to '.Lskip_gicv3_\@', but failed to update
a branch to it, which now targets a later label also called '1'.
The branch is taken rarely, when GICv3 is present but SRE is disabled
at EL3, causing a boot-time crash.
Update the caller to the new label name.
Fixes: 114945d84a30 ("arm64: Fix labels in el2_setup macros")
Cc: <stable@vger.kernel.org> # 5.12.x
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Link: https://lore.kernel.org/r/20220214175643.21931-1-joakim.tjernlund@infinera.com
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits)
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
arm64: replace in_irq() with in_hardirq()
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
...
|
|
Commit 31c00d2aeaa2 ("arm64: Disable fine grained traps on boot") zeroed
the fine grained trap registers to prevent unwanted register traps from
occuring. However, for the PMSNEVFR_EL1 register, the corresponding
HDFG{R,W}TR_EL2.nPMSNEVFR_EL1 fields must be 1 to disable trapping. Set
both fields to 1 if FEAT_SPEv1p2 is detected to disable read and write
traps.
Fixes: 31c00d2aeaa2 ("arm64: Disable fine grained traps on boot")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210824154523.906270-1-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In __init_el2_timers we initialize CNTHCTL_EL2.{EL1PCEN,EL1PCTEN} with a
RMW sequence, leaving all other bits UNKNOWN.
In general, we should initialize all bits in a register rather than
using an RMW sequence, since most bits are UNKNOWN out of reset, and as
new bits are added to the reigster their reset value might not result in
expected behaviour.
In the case of CNTHCTL_EL2, FEAT_ECV added a number of new control bits
in previously RES0 bits, which reset to UNKNOWN values, and may cause
issues for EL1 and EL0:
* CNTHCTL_EL2.ECV enables the CNTPOFF_EL2 offset (which itself resets to
an UNKNOWN value) at EL0 and EL1. Since the offset could reset to
distinct values across CPUs, when the control bit resets to 1 this
could break timekeeping generally.
* CNTHCTL_EL2.{EL1TVT,EL1TVCT} trap EL0 and EL1 accesses to the EL1
virtual timer/counter registers to EL2. When reset to 1, this could
cause unexpected traps to EL2.
Initializing these bits to zero avoids these problems, and all other
bits in CNTHCTL_EL2 other than EL1PCEN and EL1PCTEN can safely be reset
to zero.
This patch ensures we initialize CNTHCTL_EL2 accordingly, only setting
EL1PCEN and EL1PCTEN, and setting all other bits to zero.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210818161535.52786-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
|
The arm64 FEAT_FGT extension introduces a set of traps to EL2 for accesses
to small sets of registers and instructions from EL1 and EL0. Currently
Linux makes no use of this feature, ensure that it is not active at boot by
disabling the traps during EL2 setup.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210401180942.35815-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For a nvhe host, the EL2 must allow the EL1&0 translation
regime for TraceBuffer (MDCR_EL2.E2TB == 0b11). This must
be saved/restored over a trip to the guest. Also, before
entering the guest, we must flush any trace data if the
TRBE was enabled. And we must prohibit the generation
of trace while we are in EL1 by clearing the TRFCR_EL1.
For vhe, the EL2 must prevent the EL1 access to the Trace
Buffer.
The MDCR_EL2 bit definitions for TRBE are available here :
https://developer.arm.com/documentation/ddi0601/2020-12/AArch64-Registers/
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405164307.1720226-8-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
As init_el2_state is now nVHE only, let's simplify it and drop
the VHE setup.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-9-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When running VHE, we set MDSCR_EL2.TPMS very early on to force
the trapping of EL1 SPE accesses to EL2.
However:
- we are running with HCR_EL2.{E2H,TGE}={1,1}, meaning that there
is no EL1 to trap from
- before entering a guest, we call kvm_arm_setup_debug(), which
sets MDCR_EL2_TPMS in the per-vcpu shadow mdscr_el2, which gets
applied on entry by __activate_traps_common().
The early setting of MDSCR_EL2.TPMS is therefore useless and can
be dropped.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210208095732.3267263-7-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If someone happens to write the following code:
b 1f
init_el2_state vhe
1:
[...]
they will be in for a long debugging session, as the label "1f"
will be resolved *inside* the init_el2_state macro instead of
after it. Not really what one expects.
Instead, rewite the EL2 setup macros to use unambiguous labels,
thanks to the usual macro counter trick.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When a CPU is booted in EL2, the kernel checks for VHE support and
initializes the CPU core accordingly. For nVHE it also installs the stub
vectors and drops down to EL1.
Once KVM gains the ability to boot cores without going through the
kernel entry point, it will need to initialize the CPU the same way.
Extract the relevant bits of el2_setup into an init_el2_state macro
with an argument specifying whether to initialize for VHE or nVHE.
The following ifdefs are removed:
* CONFIG_ARM_GIC_V3 - always selected on arm64
* CONFIG_COMPAT - hstr_el2 can be set even without 32-bit support
No functional change intended. Size of el2_setup increased by
148 bytes due to duplication.
Signed-off-by: David Brazdil <dbrazdil@google.com>
[maz: reworked to fit the new PSTATE initial setup code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-9-dbrazdil@google.com
|
