| Age | Commit message (Collapse) | Author |
|---|
|
Switch Schmitt Trigger functions for PIN_INPUT* macros by default. This is
HW PoR configuration, the slew rate requirements without ST enabled are
pretty tough for these devices. We've noticed spurious GPIO interrupts even
with noise-free edges but not meeting slew rate requirements (3.3E+6 V/s
for 3.3v LVCMOS).
It's not obvious why one might want to disable the PoR-enabled ST on any
pin. Just enable it by default. As it's not possible to provide OR-able
macros to disable the ST, shall anyone require it, provide a set of
new macros with _NOST suffix.
Fixes: fe49f2d776f7 ("arm64: dts: ti: Use local header for pinctrl register values")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250701105437.3539924-1-alexander.sverdlin@siemens.com
[vigneshr@ti.com: Add Fixes tag]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Fix the compatible string, node label and pinmux function name to match
what the datasheets use. A change to the device tree binding is sent
separately.
Fixes: 56766ca6c4f6 ("arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC")
Fixes: acca163f3f51 ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Fixes: c6800f15998b ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Link: https://patch.msgid.link/20250628054438.2864220-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Enable MT25QU512ABB8E12 FLASH connected to XSPI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable MT25QU512ABB8E12 FLASH connected to XSPI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add XSPI node to RZ/V2H(P) ("R9A09G057") SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add XSPI node to RZ/V2N ("R9A09G056") SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Rename the GBETH1 pinctrl node from "eth0" to "eth1" to avoid duplicate
node names in the DT and correctly reflect the label "eth1_pins".
Fixes: f111192baa80 ("arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable GBETH")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250703235544.715433-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Rename the GBETH1 pinctrl node from "eth0" to "eth1" to avoid duplicate
node names in the DT and correctly reflect the label "eth1_pins".
Fixes: 802292ee27a7 ("arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable GBETH")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250703235544.715433-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The target to consider the dtbo file for installation is missing, add
it.
Fixes: a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20250701112612.3957799-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the Gigabit Ethernet Interfaces (GBETH) populated on the RZ/G3E SMARC EVK
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702005706.1200059-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/G3E SMARC EVK has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3 and SLEEP button with NMI support. Add a DT node in device tree
to instantiate the gpio-keys driver for these buttons.
The system can enter into STR state by pressing the sleep button and
wakeup from STR is done by pressing power button. The USER_SW{1,2,3}
configured as wakeup-source, so it can wakeup the system during s2idle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702092755.70847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add in mt8395-genio-1200-evk devicetree file a sub node in pmic for
the mt6359-keys compatible to add the Power and Home MT6359 PMIC keys
support.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250703-add-mt6359-pmic-keys-support-v1-3-21a4d2774e34@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add in mt8390-genio-common dtsi file the support of Home MT6359 PMIC
key.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250703-add-mt6359-pmic-keys-support-v1-2-21a4d2774e34@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Bananapi R4 has a green and a blue led which can be switched by gpio.
Green led is for running state so default on.
Green led also shares pin with eeprom writeprotect where led off allows
writing to eeprom.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-14-linux@fw-web.de
[Angelo: Fixed missing dt-bindings/leds/common.h header inclusion]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This adds the USB support for the s32g2 and s32g3 SoCs.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/e3e5041e-254d-44c3-b645-532d4d7a8f9e@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pins were moved from SoC dtsi to Board level dtsi without cleaning up
to needed ones. Drop the unused pins now.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-13-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
CCI requires proc-supply. Add it on board level.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-12-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add cci devicetree node for cpu frequency scaling.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-9-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Introduce ethernet controller nodes to EN7581 SoC and EN7581 evaluation
board.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20250520-en7581-net-v1-1-5317f8e829ad@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
fail-needs-probe
Different Spherion variants use different trackpads on the same I2C2
bus. Instead of enabling all of them by default, mark them as
"fail-needs-probe" and let the implementation determine which one is
actually present.
Additionally, move the trackpad pinctrl entry back to the individual
trackpad nodes.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250318102259.189289-3-laura.nao@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a device tree for the MT8186 based Squirtle Chromebooks, also known
as the Acer Chromebook Spin 311 (R724T). The device is a 2-in-1
convertible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
There are only two different SKUs of Voltorb, and the only difference
between them is whether a touchscreen is present or not. This can be
detected by a simple I2C transfer to the address, instead of having
separate device trees.
Merge the two device trees together and simplify the compatible string
list. The dtsi is still kept separate since there is an incoming device
that shares the same design, but with slightly difference components.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-6-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Steelix design has two possible trackpad component sources. Currently
they are all marked as available, along with having workarounds for
shared pinctrl muxing and GPIOs.
Instead, mark them all as "fail-needs-probe" and have the implementation
try to probe which one is present.
Also remove the shared resource workaround by moving the pinctrl entry
for the trackpad interrupt line back into the individual trackpad nodes.
Cc: stable+noautosel@kernel.org # Needs accompanying new driver to work
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
LDO5 regulator is used to power the i.MX8MM NVCC_SD2 I/O supply, that is
used for the SD2 card interface and also for some GPIOs.
When the SD card interface is not enabled the regulator subsystem could
turn off this supply, since it is not used anywhere else, however this
will also remove the power to some other GPIOs, for example one I/O that
is used to power the ethernet phy, leading to a non working ethernet
interface.
[ 31.820515] On-module +V3.3_1.8_SD (LDO5): disabling
[ 31.821761] PMIC_USDHC_VSELECT: disabling
[ 32.764949] fec 30be0000.ethernet end0: Link is Down
Fix this keeping the LDO5 supply always on.
Cc: stable@vger.kernel.org
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The OrangePi 4A is a typical Raspberry Pi model B sized development
board from Xunlong designed around an Allwinner T527 SoC.
The board has the following features:
- Allwinner T527 SoC
- AXP717B + AXP323 PMICs
- Up to 4GB LPDDR4 DRAM
- micro SD slot
- optional eMMC module
- M.2 slot for PCIe 2.0 x1
- 16 MB SPI-NOR flash
- 4x USB 2.0 type-A ports (one can be used in gadget mode)
- 1x Gigabit ethernet w/ Motorcomm PHY (through yet to be supported GMAC200)
- 3.5mm audio jack via internal audio codec
- HDMI 2.0 output
- eDP, MIPI CSI (2-lane and 4-lane) and MIPI DSI (4-lane) connectors
- USB type-C port purely for power
- AP6256 (Broadcom BCM4345) WiFi 5.0 + BT 5.0
- unsoldered headers for ADC and an additional USB 2.0 host port
- 40-pin GPIO header
Add a device tree for it, enabling all peripherals currently supported.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
UART1 is normally used to connect to the Bluetooth side of a Broadcom
WiFi+BT combo chip. The connection uses 4 pins.
Add pinmux nodes for UART1, one for the RX/TX pins, and one for the
RTS/CTS pins.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Nodes are supposed to be sorted by address, or if no addresses
apply, by node name. The rgmii0 pins are out of order, possibly
due to multiple patches adding pin mux settings conflicting.
Move the rgmii0 pins to the correct location.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
When the mmc nodes were added to the dtsi file, they were inserted in
the incorrect position.
Move them to the correct place.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91fdb ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-3-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91fdb ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-2-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
In gadget mode, USB connections are sluggish. The device won't send
packets to the host unless the host sends packets to the device. For
instance, SSH-ing through the USB network would apparently not work
unless you're flood-pinging the device's IP.
Add the property snps,usb2-gadget-lpm-disable to the dwc3 node, which
seems to solve this issue.
Fixes: d6f3a7f91fdb ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-1-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
We now have support in Mesa and everything is ready in distros such as
Debian.
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250522092940.3293889-1-tomeu@tomeuvizoso.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add pinctrl device to support Amlogic S6.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250527-s6-s7-pinctrl-v3-6-44f6a0451519@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add pinctrl device to support Amlogic S7D.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250527-s6-s7-pinctrl-v3-5-44f6a0451519@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add pinctrl device to support Amlogic S7.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250527-s6-s7-pinctrl-v3-4-44f6a0451519@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Ugoos AM3 is a small set-top box based on the Amlogic S912 SoC,
with a board design that is very close to the Q20x development boards.
The MMC max-frequency properties are copied from the downstream device
tree.
https://ugoos.com/ugoos-am3-16g
The following functionality has been tested and is known to work:
- debug serial port
- "update" button inside the case
- USB host mode, on all three ports
- HDMI video/audio output
- eMMC, MicroSD, and SDIO WLAN
- S/PDIF audio output
- Ethernet
- Infrared remote control input
The following functionality doesn't seem to work:
- USB role switching and device mode on the "OTG" port
- case LED
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250613-ugoos-am3-v3-2-f8a43e6bbfdb@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
meson-gxm-rbox-pro.dtb: brcmf@1: $nodename:0: 'brcmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250424084721.105113-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Configure timer nodes on stm32mp257f-ev1:
- Timer3 CH2 is available on mikroBUS connector for PWM
- timer8 CH1, timer8 CH4, timer10 CH1 and timer12 CH2 are available
on EXPANSION connector.
Timers are kept disabled by default, so the pins can be used for any
other purpose (and the timers can be assigned to any of the processors).
Arbitrary choice is to use all these timers as PWM (or counter on
internal clock signal), except for timer10 that is configured with
CH1 as an input (for capture).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-9-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add timer pins available on stm32mp257f-ev1, configured for PWM:
- timer3 CH2 is available on mikroBUS connector
- timer8 CH1, timer8 CH4, timer10 CH1 and timer12 CH2 are available
on EXPANSION connector
Arbitrary define all these pins to be used as PWM (output) channels,
except for timer10 CH1, to be used as counter input.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-8-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add timers support on STM32MP25 SoC. Use dedicated compatible to handle
new features and instances introduced with this SoC. STM32MP25 SoC has
various timer flavours, each group has its own specific feature list:
- Advanced-control timers (TIM1/TIM8/TIM20)
- General-purpose timers (TIM2/TIM3/TIM4/TIM5)
- Basic timers (TIM6/TIM7)
- General-purpose timers (TIM10/TIM11/TIM12/TIM13/TIM14)
- General purpose timers (TIM15/TIM16/TIM17)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-7-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add internal pull-up to the SD_1 card detect signal, without this the CD
signal is floating and spurious detects events can happen.
Fixes: 87f95ea316ac ("arm64: dts: ti: Add Toradex Verdin AM62P")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250701081643.71406-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The TBU clock belongs to the Translation Buffer Unit, part of the SMMU.
The ref clock is already being driven upstream through some of the
branches.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250521-topic-8150_pcie_drop_clocks-v1-4-3d42e84f6453@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The TBU clock belongs to the Translation Buffer Unit, part of the SMMU.
The ref clock is already being driven upstream through some of the
branches.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250521-topic-8150_pcie_drop_clocks-v1-3-3d42e84f6453@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.17, please pull the following:
- Linus updates the 64-bit BCMBCA SoCs Device Tree with the common
peripherals that exit as well as correct IRQ assignments
- Andrea adds support for the RP1 companion chip on the Raspberry Pi 5
systems with clocks, gpios, pinctrl, all of that using an overlay to
describe those peripherals
- Rob drops the interrupt-parent property from the GICv2M node on
Northstar2 SoCs
* tag 'arm-soc/for-6.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: northstar2: Drop GIC V2M "interrupt-parent"
arm64: dts: broadcom: Add overlay for RP1 device
arm64: dts: broadcom: Add board DTS for Rpi5 which includes RP1 node
arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
arm64: dts: rp1: Add support for RaspberryPi's RP1 device
dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
ARM64: dts: bcm63158: Add BCMBCA peripherals
ARM64: dts: bcm6858: Add BCMBCA peripherals
ARM64: dts: bcm6856: Add BCMBCA peripherals
ARM64: dts: bcm4908: Add BCMBCA peripherals
Link: https://lore.kernel.org/r/20250630190216.1518354-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.17
- Add SPI FLASH, camera, and Ethernet support on the RZ/G3E SoC and/or
the RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add Ethernet, USB2, and PMIC support on the RZ/V2H and RZ/V2N SoCs
and EVK boards,
- Add timer, I2C, watchdog, and GPU support on the RZ/V2N SoC and the
RZ/V2N EVK board,
- Add debug LED support for the RZN1D-DB development board,
- Improve PCIe clock description on the Retronix Sparrow Hawk board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r9a09g047: Add GBETH nodes
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Rename fixed regulator node names
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Add RAA215300 PMIC
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add RAA215300 PMIC
arm64: dts: renesas: rcar-gen3: Add bootph-all to sysinfo EEPROMs
arm64: dts: renesas: sparrow-hawk: Describe split PCIe clock
arm64: dts: renesas: r8a779g0: Describe PCIe root ports
arm64: dts: renesas: ebisu: Add CAN0 support
ARM: dts: renesas: r9a06g032: Add second clock input to RTC
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable USB2.0 support
arm64: dts: renesas: r9a09g056: Add USB2.0 support
arm64: dts: renesas: r8a779g3-sparrow-hawk: Sort DTS
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe debug LEDs
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2.0 support
PCI/pwrctrl: Add optional slot clock for PCI slots
arm64: dts: renesas: r9a09g057: Add USB2.0 support
arm64: dts: renesas: r9a09g047e57-smarc: Enable CRU, CSI support
arm64: dts: renesas: renesas-smarc2: Enable I2C0 node
arm64: dts: renesas: r9a09g047e57-smarc: Add I2C0 pincontrol
arm64: dts: renesas: r9a09g047: Add CRU, CSI2 nodes
...
Link: https://lore.kernel.org/r/cover.1751026664.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The
Thunder2 SoC is missing the core "uartclk". In this case, the Linux
driver uses single clock for both clock inputs. Let's assume that's how
the h/w is wired and make the DT reflect that.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250609215706.3009692-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The
LG131x SoCs are missing the core "uartclk". In this case, the Linux
driver uses single clock for both clock inputs. Let's assume that's how
the h/w is wired and make the DT reflect that.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20250609-dt-lg-fixes-v1-2-e210e797c2d7@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The LG1312 and LG1313 DT are almost identical with the exception of the
ethernet node. Refactor the common parts into a separate .dtsi file and
include it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20250609-dt-lg-fixes-v1-1-e210e797c2d7@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Introduce device tree overlays for supporting the eMMC (RTK0EF0186B02000BJ)
and microSD (RTK0EF0186B01000BJ) sub-boards connected via the CN15
connector on the RZ/V2H and RZ/V2N evaluation kits.
These overlays enable SDHI0 with appropriate pin control settings, power
regulators, and GPIO handling. Both sub-boards are supported using shared
overlay files that can be applied to either EVK due to their identical
connector layout and interface support.
To support this, new DT overlay files are added:
- `rzv2-evk-cn15-emmc.dtso` for eMMC
- `rzv2-evk-cn15-sd.dtso` for microSD
Additionally, the base DTS files for both EVKs are updated to include a
fixed 1.8V regulator (`reg_1p8v`) needed by the eMMC sub-board and
potential future use cases such as HDMI output.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250627193742.110818-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The Gray Hawk Single board with R-Car V4M-7 (R8A779H2) uses an updated
version of the R-Car V4M (R8A779H0) SoC.
For now, there are no visible differences compared to the variant
equipped with an R-Car V4M (R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/d2e0e7b746063368b83148100aa553cff55b8b60.1750931027.git.geert+renesas@glider.be
|
