summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2023-08-12Merge tag 'at91-dt-6.6' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt AT91 device tree updates for 6.6 It contains: - TCB timer nodes adition for at91-sama5d3_ksz9477_evb board - device tee cleanups * tag 'at91-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: remove duplicated entries ARM: dts: microchip: split interrupts per cells ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5 ARM: dts: at91: ksz9477_evb: Add missing timer nodes ARM: dts: at91-vinco: Fix "status" values ARM: dts: microchip: add missing space before { ARM: dts: microchip: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/20230804044102.231448-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12ARM: dts: st: spear: split interrupts per cellsKrzysztof Kozlowski
Each interrupt should be in its own cell. This is much more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230730111536.98164-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'renesas-dts-for-v6.6-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.6 - Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC, - Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L SMARC EVK development boards, - Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs, - Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC, - Add LED support for the Spider development board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: spider-cpu: Add GP LEDs arm64: dts: renesas: r8a779f0: Add INTC-EX node arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3 arm64: dts: renesas: r9a07g043: Add MTU3a node ARM dts: renesas: armadillo800eva: Switch to enable-gpios arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0 riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3 arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3 arm64: dts: renesas: Add missing space before { ARM: dts: renesas: Add missing space before { arm64: dts: renesas: Minor whitespace cleanup around '=' arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC arm64: dts: renesas: r9a09g011: Add CSI nodes arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-04ARM: dts: at91: remove duplicated entriesClaudiu Beznea
Remove duplicated DTC_FLAGS_<board> := -@ entries which intends to enable the building of device tree overlays. Commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") added those entries at the beginning of file w/o removing the already available entries spread though file. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230721053918.33944-1-claudiu.beznea@tuxon.dev Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-08-02ARM: dts: microchip: split interrupts per cellsKrzysztof Kozlowski
Each interrupt should be in its own cell. This is much more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230730111542.98238-1-krzysztof.kozlowski@linaro.org Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-07-31ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5Lukasz Majewski
Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows following device warning: 'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"' This is not critical, as KSZ driver by itself assigns default value of tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode). However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps' has been specified with the default value of 2000 ps. Signed-off-by: Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20230727080656.3828397-1-lukma@denx.de Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-07-31ARM: dts: at91: ksz9477_evb: Add missing timer nodesLukasz Majewski
Without this change the KSZ9477-EVB board hangs just after passing execution flow from u-boot to Linux kernel. This code has been copied from at91-sama5d3_xplained.dts. Test setup: Linux 6.5-rc1 Config: arch/arm/configs/sama5_defconfig Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi Signed-off-by: Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20230712152111.3756211-1-lukma@denx.de Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-07-31ARM: dts: at91-vinco: Fix "status" valuesRob Herring
The defined value for "status" is "disabled", not "disable". Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230626221010.3946263-1-robh@kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-07-29ARM: dts: microchip: add missing space before {Krzysztof Kozlowski
Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230705150058.293942-1-krzysztof.kozlowski@linaro.org [claudiu.beznea: added link] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-07-29ARM: dts: microchip: minor whitespace cleanup around '='Krzysztof Kozlowski
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230702185108.43959-1-krzysztof.kozlowski@linaro.org [claudiu.beznea: added link] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-07-27ARM: tegra: Provide specific compatible string for Nexus 7 panelThierry Reding
panel-lvds alone is not a valid compatible string and we always need a specific compatible string as well. Nexus 7 can come with one of (at least) two panels, so pick one of them as the specific compatible string. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-27ARM: tegra: Use Hannstar HSD101PWW2 on Pegatron ChagallThierry Reding
The LVDS bindings require a specific compatible string in addition to the generic "panel-lvds". Add the HannStar HSD101PWW2 which is used on a similar device (ASUS TF201) and seems to work fine with slightly modified timings in DT. Suggested-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-27ARM: tegra: Reuse I2C3 for NVECThierry Reding
Instead of duplicating the I2C3 node and adding NVEC specific properties, reuse the I2C3 node, extend it with NVEC specific properties and drop properties that are not needed by NVEC. This results in a DTB that is a bit cleaner and avoids accidentally using I2C3 and NVEC which would have them fight over the same hardware resources. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-27ARM dts: renesas: armadillo800eva: Switch to enable-gpiosKrzysztof Kozlowski
The recommended name for enable GPIOs property in regulator-gpio is "enable-gpios". This is also required by bindings: r8a7740-armadillo800eva.dtb: regulator-vccq-sdhi0: Unevaluated properties are not allowed ('enable-gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230726070241.103545-1-krzysztof.kozlowski@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-07-25ARM: dts: renesas: Add missing space before {Krzysztof Kozlowski
Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230705145912.293315-1-krzysztof.kozlowski@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-07-21ARM: tegra: Add missing reset-names for Tegra HS UARTThierry Reding
The device tree bindings for the Tegra high-speed UART require the reset-names property, so add it whenever the compatible string for the serial port is overwritten. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-21ARM: tegra: Remove reset-names for UART devicesThierry Reding
The UART devices found on Tegra chips have a single reset connected to them, so a reset-names property isn't needed. In fact, the device tree bindings don't allow this property, so remove them to allow the nodes to be properly validated. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-21ARM: tegra: Remove dmas and dma-names for debug UARTThierry Reding
The debug UART doesn't support DMA and the DT bindings prohibit the use of the dmas and dma-names properties for it, so remove them. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-05ARM: dts: st: add missing space before {Krzysztof Kozlowski
Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230705150033.293832-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-29Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
2023-06-26Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - lots of build cleanups from Arnd spread throughout the arch/arm tree - replace strlcpy() with the preferred strscpy() - use sign_extend32() in the module linker - drop handle_irq() machine descriptor method * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h ARM: 9313/1: vdso: add missing prototypes ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c ARM: 9311/1: decompressor: move function prototypes to misc.h ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype ARM: 9309/1: add missing syscall prototypes ARM: 9308/1: move setup functions to header ARM: 9307/1: nommu: include asm/idmap.h ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning ARM: 9305/1: add clear/copy_user_highpage declarations ARM: 9304/1: add prototype for function called only from asm ARM: 9303/1: kprobes: avoid missing-declaration warnings ARM: 9302/1: traps: hide unused functions on NOMMU ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function ARM: 9300/1: Replace all non-returning strlcpy with strscpy ARM: 9299/1: module: use sign_extend32() to extend the signedness ARM: 9298/1: Drop custom mdesc->handle_irq()
2023-06-22ARM: mvebu: fix unit address on armada-390-db flashArnd Bergmann
The unit address needs to be changed to match the reg property: arch/arm/boot/dts/marvell/armada-390-db.dts:84.10-106.4: Warning (spi_bus_reg): /soc/spi@10680/flash@1: SPI bus unit address format error, expected "0" Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'arm-dts-mv-for-6.5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into soc/dt ARM: dts: Move .dts files to vendor sub-directories The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. * tag 'arm-dts-mv-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include Link: https://lore.kernel.org/r/20230621185025.GA3197738-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21ARM: dts: Add .dts files missing from the buildRob Herring
Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build. Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21ARM: dts: allwinner: Use quoted #includeRob Herring
In preparation to move .dts files into subdirectories, include sunxi-h3-h5-emlid-neutis.dtsi from the current directory rather than the symlinked include path. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21Merge tag 'at91-dt-6.5-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt AT91 DT for 6.5 #2 It contains: - generic names for shutdown controller nodes - enablement of DT overlay support for some AT91 boards - fix reset and SPI CS for lan966x-kontron-kswitch-d10-mmt based boards - addition of PHY interrupts for lan966x-kontron-kswitch-d10-mmt-8g board * tag 'at91-dt-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards ARM: dts: at91: use generic name for shutdown controller Link: https://lore.kernel.org/r/20230621093853.1575312-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21ARM: dts: lan966x: kontron-d10: add PHY interruptsMichael Walle
With interrupt handling fixed in the MaxLinear PHY driver, see commit 97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by default"), we can finally add the correct interrupt description to the device tree. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: lan966x: kontron-d10: fix SPI CSMichael Walle
The pinctrl node was missing which change the pin mux to GPIO mode. Add it so we don't have to rely on the bootloader to set the correct mode. Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-2-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: lan966x: kontron-d10: fix board resetMichael Walle
The pinctrl node was missing which change the pin mux to GPIO mode. Add it. Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support") Signed-off-by: Michael Walle <mwalle@kernel.org> [claudiu.beznea: moved pinctrl-* bindings after compatible] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-1-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: at91: Enable device-tree overlay support for AT91 boardsCristian Birsan
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> [claudiu.beznea: s/arm: dts/ARM: dts: at91/ in commit title] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com
2023-06-20Merge tag 'arm-soc/for-6.5/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20arm: dts: Enable device-tree overlay support for AT91 boardsCristian Birsan
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'mvebu-dt-6.5-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.5 (part 1) Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards * tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: align MTD partition nodes to dtschema ARM: dts: armada-xp: Replace deprecated spi-gpio properties ARM: dts: armada388-clearfog: add missing phy-modes ARM: dts: kirkwood: Add Endian 4i Edge 200 board Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'ti-keystone-dt-for-v6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt Keystone2 device tree updates for v6.5 Cosmetic cleanups: * Do not capitalize hex digits * Unify pinctrl-single pin group nodes for keystone * Fix eeprom node names * tag 'ti-keystone-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: ARM: dts: keystone: Do not capitalize hex digits ARM: dts: keystone: Remove ti,keystone from soc node compatible ARM: dts: keystone: Fix EEPROM node names ARM: dts: Unify pinctrl-single pin group nodes for keystone Link: https://lore.kernel.org/r/20230615164127.qcgwrbwpmclx5wlm@landscape Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-dts-for-6.5-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM32 DeviceTree updates for v6.5 On MSM8960, support for USB is added and the Samsung Galaxy Express is added. GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard. On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved. The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined. Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding. * tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm: dts: qcom: sdx55: Add interconnect path ARM: dts: qcom: msm8226: Add thermal zones node ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells ARM: dts: qcom: msm8226: Add qfprom node ARM: dts: qcom: pm8941: Add thermal zone config ARM: dts: qcom: pm8841: Add thermal zone config ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config ARM: dts: qcom: msm8974: rename labels for DSI nodes ARM: dts: qcom: apq8074-dragonboard: add gpio keys ARM: dts: qcom: apq8074-dragonboard: add onboard leds ARM: dts: qcom: Add Samsung Galaxy Express support ARM: dts: qcom: msm8960: Add USB node ARM: dts: qcom: adapt to LP855X bindings changes ARM: dts: qcom: msm8226: Provide clocks to mmcc node ARM: dts: qcom: msm8226: Use XO from rpmcc where possible Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'v6.4-next-dts32' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt MT7530 (e.g. BPI R2): - several DT clean-ups - add port5 as CPU port * tag 'v6.4-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: add port@5 as CPU port arm: dts: mt7623: enable flow control on port@6 arm: dts: mt7623: change mt7530 switch address arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi arm: dts: mt7623: add gmacs to mt7623.dtsi Link: https://lore.kernel.org/r/98e21acb-d792-6a8c-2de6-12d5af8a8111@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-dts-for-6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.5 NAND support on IPQ4019 boards is restored, after a faulty node rename. On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch gains vibrator support. On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074 Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and modem DSPs are enabled. On SDX65 PCIe controller and PHY are introduced, to provide endpoint functionality. This is enabled on the related MTP. A range of DeviceTree cleanups are also included. * tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) ARM: dts: qcom: apq8074-dragonboard: enable DSI panel ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator ARM: dts: qcom: msm8226: Add IMEM node ARM: dts: qcom: msm8226: Add rpm-stats device node ARM: dts: qcom: msm8226: Add PMU node ARM: dts: qcom: sdx65-mtp: Enable PCIe EP ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY ARM: dts: qcom: sdx65: Add support for PCIe EP ARM: dts: qcom: sdx65: Add support for PCIe PHY ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings ARM: dts: qcom: apq8084: correct thermal sensor unit-address ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus ARM: dts: qcom: ipq8064: align USB node names with bindings ARM: dts: qcom: ipq8064: correct LED node names ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address ARM: dts: qcom: ipq8064: drop leading 0 from unit-address ARM: dts: qcom: msm8974: correct pronto unit-address ... Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'imx-dt-6.5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'sunxi-dt-for-6.5-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'stm32-dt-for-v6.5-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.5, round 1 Highlights: ---------- - MCU/MPU: - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts. - Fix LTDC/DSI warnings. - MPU: - STMP32MP15: - Add OTP part number and Vrefint calibration in bsec. - M4 hold management updated. As SMC call is deprecated, the service is moved on a SCMI service. - Add ADC internal channels (VREFINT/VDDCORE). - ST: - Enable ADC1&2 on STM32MP15 DKx boards. - Adopt generic IIO bindings on STM32MP157C ED1 - Add supplies for OV5640 in STM32MP157C EV1 to fix yaml validation. - Fix i2s bindings to match with the YAML validation (DKx boards). - DH: - Rearrange MAC EEPROM. - Rename AV96 sound card. - Adopt generic IIo bindings. - Fix audio routing. -PHYTEC: - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM. This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. * tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ARM: dts: stm32: add vrefint calibration on stm32mp15 ARM: dts: stm32: add adc internal channels to stm32mp15 ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards ARM: dts: stm32: fix dsi warnings on stm32mp15 boards dt-bindings: display: st,stm32-dsi: Remove unnecessary fields ARM: dts: stm32: fix warnings on stm32f469-disco board ARM: dts: stm32: Shorten the AV96 HDMI sound card name ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15 ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 ARM: dts: stm32: add STM32MP1-based Phytec board ... Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20ARM: dts: at91: use generic name for shutdown controllerClaudiu Beznea
Use poweroff generic name for shdwc node to cope with device tree specifications. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230616101646.879480-2-claudiu.beznea@microchip.com
2023-06-19ARM: dts: BCM5301X: Add cells sizes to PCIe nodesRafał Miłecki
This fixes: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230616105827.21656-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-19ARM: 9311/1: decompressor: move function prototypes to misc.hArnd Bergmann
A number of prototypes are missing for the decompressor, some of them are in the .c files that contain the callers, but are invisible at the function definition: arch/arm/boot/compressed/misc.c:129:17: error: no previous prototype for '__div0' [-Werror=missing-prototypes] arch/arm/boot/compressed/misc.c:138:1: error: no previous prototype for 'decompress_kernel' [-Werror=missing-prototypes] arch/arm/boot/compressed/misc.c:163:6: error: no previous prototype for 'fortify_panic' [-Werror=missing-prototypes] arch/arm/boot/compressed/decompress.c:63:5: error: no previous prototype for 'do_decompress' [-Werror=missing-prototypes] arch/arm/boot/compressed/fdt_check_mem_start.c:63:10: error: no previous prototype for 'fdt_check_mem_start' [-Werror=missing-prototypes] Move these all to misc.h so they are visible by the callee as well. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-16ARM: dts: mvebu: align MTD partition nodes to dtschemaChris Packham
Update the node names for the SPI NOR and NAND partitions to conform to the partition properties in the relevant dtschema. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-06-14arm: dts: qcom: sdx55: Add interconnect pathKrishna chaitanya chundru
Add pcie-mem interconnect path to sdx55 target. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1686752666-13426-3-git-send-email-quic_krichai@quicinc.com
2023-06-13ARM: dts: qcom: msm8226: Add thermal zones nodeMatti Lehtimäki
Add thermal zones present on MSM8226 SoC. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230507201225.89694-7-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: msm8226: Add tsens node and related nvmem cellsMatti Lehtimäki
Specify pre-parsed per-sensor calibration nvmem cells in the qfprom device node rather than parsing the whole data blob in the driver. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230507201225.89694-6-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: msm8226: Add qfprom nodeMatti Lehtimäki
Add missing QFPROM definition for MSM8226 SoC. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230507201225.89694-5-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: pm8941: Add thermal zone configMatti Lehtimäki
Add thermal zone for the PMIC thermal sensor. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230529221501.43455-4-matti.lehtimaki@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 09:57:11 +0000