summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2025-04-22ARM: dts: opos6ul: add ksz8081 phy propertiesSébastien Szymanski
Commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup") removed a PHY fixup that setted the clock mode and the LED mode. Make the Ethernet interface work again by doing as advised in the commit's log, set clock mode and the LED mode in the device tree. Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-04-22ARM: dts: imx: Fix the iim compatible stringFabio Estevam
Per imx-iim.yaml, the compatible string should only contain a single entry. Change it accordingly to fix the following dt-schema warnings: efuse@83f98000: compatible: ['fsl,imx51-iim', 'fsl,imx27-iim', 'syscon'] is too long Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-04-22ARM: dts: imx31/imx6: Use flash as the NOR node nameFabio Estevam
According to mtd-physmap.yaml, 'nor' is not a valid node name. Change it to 'flash' to fix the following dt-schema warning: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-04-20Merge branch 'arm32-for-6.15' into arm64-for-6.16Bjorn Andersson
Changes queued for v6.15 would have had the potential to break bisectability and was therefor not accepted. Merge the whole set towards v6.16, as this is no longer a concern.
2025-04-14ARM: dts: qcom: sdx55/sdx65: Fix CPU power-domain-namesRob Herring (Arm)
"rpmhpd" is not documented nor used anywhere. The power-domain is used for performance scaling (cpufreq), so "perf" is the correct name to use. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-7-63d7dc9ddd0a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-04-14ARM: dts: renesas: r9a06g032-rzn1d400-eb: describe SD card portWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250410071406.9669-6-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14ARM: dts: renesas: r9a06g032: Describe SDHCI controllersWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250410071406.9669-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe keysWolfram Sang
The keys are connected to the I2C GPIO extender which has the interrupt pin not connected. So, we need to poll. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250328153134.2881-12-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe I2C busWolfram Sang
The actual sensor might differ, but all known are LM75B compatible. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250328153134.2881-10-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe I2C busWolfram Sang
Schematics mention a 24cs64 on the bus, but I definitely have only a 24c64. So, it is only mentioned as a comment. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250328153134.2881-9-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14ARM: dts: renesas: r9a06g032: Describe I2C controllersWolfram Sang
To match the documentation and schematics, they are numbered from 1 and not from 0. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250328153134.2881-8-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-14ARM: dts: renesas: Add r9a06g032-rzn1d400-eb board device-treeClément Léger
The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb. It adds support for the 2 additional switch ports (port C and D) that are available on that board. Signed-off-by: Clément Léger <clement.leger@bootlin.com> [Thomas: move the DTS to the Renesas directory, declare the PHY LEDs] Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/20250324-rzn1d400-eb-v4-1-d7ebbbad1918@bootlin.com [wsa: Correct LAN LED nodes] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250411095425.1842-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-11ARM: dts: at91: at91sam9263: fix NAND chip selectsWolfram Sang
NAND did not work on my USB-A9263. I discovered that the offending commit converted the PIO bank for chip selects wrongly, so all A9263 boards need to be fixed. Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-11ARM: dts: at91: usb_a9g20: move wrong RTC nodeWolfram Sang
Only the LPW variant has the external RTC. Move it to that board specific DT. As a result, the common include for A9G20 boards can go now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402204856.5197-5-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-11ARM: dts: at91: calao_usb: simplify chosen nodeWolfram Sang
All devices use equal parameters in 'chosen'. So, the memory node can be put into the most generic DTSI. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402204856.5197-4-wsa+renesas@sang-engineering.com [claudiu.beznea: s/can bet put/can be put/g in commit description] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-11ARM: dts: at91: usb_a9260: use 'stdout-path'Wolfram Sang
Do not use the kernel command line for specifying the default serial console. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402204856.5197-3-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-11ARM: dts: at91: calao_usb: simplify memory nodeWolfram Sang
All devices have 64MB RAM. So, the memory node can be put into the most generic DTSI. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402204856.5197-2-wsa+renesas@sang-engineering.com [claudiu.beznea: s/can bet put/can be put/g in commit description] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-11ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip selectWolfram Sang
Dataflash did not work on my board. After checking schematics and using the proper GPIO, it works now. Also, make it active low to avoid: flash@0 enforce active low on GPIO handle Fixes: 2432d201468d ("ARM: at91: dt: usb-a9263: add dataflash support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250404112742.67416-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-11ARM: dts: at91: usb_a9g20: add SPI EEPROMWolfram Sang
Schematics and board layout indicate that versions with a dataflash instead of an EEPROM might exist. Let's handle that once we have hardware to test. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250403064336.4846-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-10ARM: dts: nokia n900: remove useless io-channel-cells propertyDavid Heidelberg
This property is irrelevant for the ad5820 DAC, the driver nor the hardware indicate use of channel cells. Fixes: d510d12f26f4 ("ARM: dts: nokia n900: update dts with camera support") Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20250213203208.93316-1-david@ixit.cz Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-04-08ARM: dts: qcom: msm8974: Use the header with DSI phy clock IDsKrzysztof Kozlowski
Use the header with DSI phy clock IDs to make code more readable. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-2-73b482a6dd02@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-04-08ARM: dts: qcom: msm8226: Use the header with DSI phy clock IDsKrzysztof Kozlowski
Use the header with DSI phy clock IDs to make code more readable. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250408-dts-qcom-dsi-phy-clocks-v2-1-73b482a6dd02@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-04-08ARM: dts: nuvoton: Add MMC NodesWilliam A. Kennington III
We have the driver support code, now we just need to expose the device node which can export the SDHCI and SDMMC properties for the 2 MMC controllers in the npcm7xx. Tested on real hardware to verify that the MMC controller is functional with filesystem access. Signed-off-by: William A. Kennington III <william@wkennington.com> Link: https://patch.msgid.link/20250404191144.4111788-1-william@wkennington.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-04-08ARM: dts: nuvoton: Add OHCI nodeWilliam A. Kennington III
The EHCI peripheral already exists in the devicetree, but the hardware also supports a discrete OHCI unit on the same USB PHY. Generic OHCI works fine for this device already and has been tested on real hardware. Signed-off-by: William A. Kennington III <william@wkennington.com> Link: https://patch.msgid.link/20250401233409.3215091-1-william@wkennington.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-04-08ARM: dts: nuvoton: Add UDC nodesWilliam A. Kennington III
The driver support was already added but we are missing the nodes in our common devicetree. Signed-off-by: William A. Kennington III <william@wkennington.com> Link: https://patch.msgid.link/20250401235630.3220150-1-william@wkennington.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-04-08ARM: dts: nuvoton: Add EDAC nodeWilliam A. Kennington III
We have the driver support code, now we just need to expose the device node which can export the EDAC properties for the system memory controller. Tested on real hardware to verify that error counters show up. Signed-off-by: William A. Kennington III <william@wkennington.com> Link: https://patch.msgid.link/20250401231001.3202669-1-william@wkennington.com [arj: Add another colon to patch subject] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-04-08ARM: dts: nuvoton: Align GPIO hog name with bindingsKrzysztof Kozlowski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warnings like: nuvoton-npcm750-runbmc-olympus.dtb: G1A_P0_0: $nodename:0: 'G1A_P0_0' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250116090047.87499-1-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-04-07ARM: dts: Drop DTS for BCM59056 PMUArtur Weber
The BCM59056 PMU has its own separate DTSI, meant to be included in a DTS file after defining the pmu node on some I2C bus. This seems rather unintuitive; drop the DTS in favor of adding the BCM59056 PMU node directly into the device DTS files. If the amount of subdevices supported by the BCM590xx grows, and a common device tree turns out to be beneficial, it can be reintroduced in the future. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20250304-bcm59054-v6-3-ae8302358443@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-04-07ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSIArtur Weber
Add common DTSI with common pin control configs for BCM21664/BCM23550 and include it in bcm2166x-common.dtsi. The configs are kept in a separate DTSI to keep things cleaner (pin config definitions take up quite a lot of space). Currently contains pins for BSC buses and SD/MMC; more pins can be added in the future. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20250303-bcm21664-pinctrl-v3-6-5f8b80e4ab51@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-04-07ARM: dts: bcm2166x-common: Add pinctrl nodeArtur Weber
Now that the pinctrl driver supports the BCM21664, add a node for pinctrl in the DTS to allow for controlling pinmux pins. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20250303-bcm21664-pinctrl-v3-5-5f8b80e4ab51@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-04-07ARM: dts: rockchip: Add aliases for rk3036-kylin MMC devicesAndy Yan
Add aliases for the MMC devices so that after the system starts up, they will all have fixed device numbers. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Link: https://lore.kernel.org/r/20250324125215.160616-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-27Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "There is new support for additional on-chip devices on Apple, Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and Amlogic devices. The Arm Morello reference platform gets a devicetree for booting in normal aarch64 mode. The hardware supports experimental CHERI support, which requires a modified kernel. The AMD (formerly Xilinx) Versal NET SoC gets added, this is a combined FPGA with Cortex-A78 CPUs in a SoC. Six new ST STM32MP2 SoC variants are added. Like the earlier STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are based on one or two Cortex-A35 cores but each feature a different set of I/O devices. Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU cores Apple T2 is the baseboard management controller on earlier Intel CPU based Macs, with 16 models now gaining initial support. All the above come with dts files for the reference boards. In addition, these boards are added for the SoCs that are already supported: - The Milk-V Jupiter board based on SpacemiT K1/M1 - NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC - Three boards based on 32-bit stm32mp1 - 11 distinct board variants from Toradex and one from Variscite, all based on i.MX6 - Google Pixel Pro 6 phone based on gs101 (Tensor) - Three additional variants of the i.MX8MP based "Skov" board - A second variant of the i.MX95 EVK board - Two boards based on Renesas SoCs - Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT Reform 2' laptop" * tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits) arm64: dts: Add gpio_intc node for Amlogic A5 SoCs arm64: dts: Add gpio_intc node for Amlogic A4 SoCs arm64: dts: hi3660: Add property for fixing CPUIdle arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0 arm64: dts: marvell: Use preferred node names for "simple-bus" arm64: dts: marvell: Drop unused CP11X_TYPE define arm64: dts: marvell: Move arch timer and pmu nodes to top-level arm64: dts: rockchip: Fix PWM pinctrl names arm64: dts: rockchip: fix RK3576 SCMI clock IDs dt-bindings: clock: rk3576: add SCMI clocks arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names arm64: dts: amd/seattle: Move and simplify fixed clocks arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7 arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C arm64: dts: rockchip: Add SDHCI controller for RK3528 arm64: dts: rockchip: Remove bluetooth node from rock-3a arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory ...
2025-03-26ARM: dts: socfpga: Add basic support for Terrasic's de10-nanoUwe Kleine-König
This dts is enough to make the board boot to Linux with the rootfs on a micro SD card. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2025-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc8). Conflict: tools/testing/selftests/net/Makefile 03544faad761 ("selftest: net: add proc_net_pktgen") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") tools/testing/selftests/net/config: 85cb3711acb8 ("selftests: net: Add test cases for link and peer netns") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") Adjacent commits: tools/testing/selftests/net/Makefile c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY") 355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-20Merge tag 'amlogic-arm-dt-for-v6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.15: - switch to the new PWM controller bindings * tag 'amlogic-arm-dt-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: amlogic: meson8b: switch to the new PWM controller binding ARM: dts: amlogic: meson8: switch to the new PWM controller binding Link: https://lore.kernel.org/r/8632a8fa-7af6-4fb7-ba87-297df4f084f5@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'dt-cleanup-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements inDTS for v6.15 1. ARM Cirrus EP7211: Align GPIO node name to match what bindings expect. 2. Loongson 2K1000: Drop incorrect spidev description, by pretending to have there something else. This will have impact on the users of DTS, because spidev will stop working, however no counter-proposals of fixing this or even explaining this were proposed for half a year after the patch was posted. Therefore drop incorrect hardware description, hoping affected users will come if proper one, if needed. * tag 'dt-cleanup-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: loongarch: dts: remove non-existent DAC from 2k1000-ref ARM: dts: cirrus: ep7211: Align GPIO hog name with bindings Link: https://lore.kernel.org/r/20250316144221.18240-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'tegra-for-6.15-arm-dt' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.15-rc1 This contains a few patches that add some missing, display-related nodes on Tegra114 and Tegra124, as well as a small fix in the display clock used for DSI on Tegra114 and the addition of a light sensor found on the ASUS TF101. * tag 'tegra-for-6.15-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: tf101: Add al3000a illuminance sensor node ARM: tegra: Add DSI-A and DSI-B nodes on Tegra124 ARM: tegra: Add HDA node on Tegra114 ARM: tegra: Add ARM PMU node on Tegra114 ARM: tegra: Switch DSI-B clock parent to PLLD on Tegra114 Link: https://lore.kernel.org/r/20250307162332.3451523-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'omap-for-v6.15/dt-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: misc. OMAP updates for v6.15 * tag 'omap-for-v6.15/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: omap4-panda-a4: Add missing model and compatible properties dt-bindings: omap: Add TI Pandaboard A4 variant ARM: dts: ti/omap: omap4-serial: fix interrupts syntax ARM: dts: ti: omap: Align GPIO hog name with bindings Link: https://lore.kernel.org/r/7hiko7qzud.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'mvebu-dt64-6.15-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.15 (part 1) device tree clean-up fomr DT maintainers * tag 'mvebu-dt64-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Use preferred node names for "simple-bus" arm64: dts: marvell: Drop unused CP11X_TYPE define arm64: dts: marvell: Move arch timer and pmu nodes to top-level ARM: dts: marvell: armada: Align GPIO hog name with bindings ARM: dts: marvell: kirkwood-openrd: Align GPIO hog name with bindings arm64: dts: marvell: armada-8040: Align GPIO hog name with bindings arm64: dts: marvell: Add missing board compatible for IEI-Puzzle-M801 arm64: dts: marvell: Fix missing/incorrect "marvell,armada3710" compatible arm64: dts: marvell: Drop incomplete root compatible/model properties dt-bindings: marvell: armada-7k-8k: Add missing 7040 and 8040 board compatibles dt-bindings: marvell: armada-7k-8k: Move Armada 8KPlus to schema dt-bindings: marvell: armada-37xx: Add glinet,gl-mv1000 compatible Link: https://lore.kernel.org/r/87wmco99xv.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'zynq-dt-for-6.15' of https://github.com/Xilinx/linux-xlnx into soc/dtArnd Bergmann
arm64: Zynq DT changes for 6.15 - Align platforms with dt-schema - Describe QSPI * tag 'zynq-dt-for-6.15' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Do not define address/size-cells for nand-controller ARM: zynq: Remove ethernet0 alias from Microzed ARM: zynq: Add sdhci to alias node ARM: zynq: Enable QSPIs on platforms ARM: zynq: Fix fpga region DT nodes name ARM: zynq: Rename i2c?-gpio to i2c?-gpio-grp ARM: zynq: Define rtc alias on zc702/zc706 ARM: zynq: Point via nvmem0 alias to eeprom on zc702/zc706 ARM: zynq: Define u-boot bootscrip addr via DT ARM: zynq: Wire smcc with nand/nor memories on zc770 platform ARM: zynq: Mark boot-phase-specific device nodes ARM: zynq: DT: List OCM memory for all platforms ARM: zynq: Remove deprecated device_type property ARM: zynq: Replace 'io-standard' with 'power-source' property Link: https://lore.kernel.org/r/CAHTX3d+DZo3thrakBf=QCq91QFeChoizuhVa6oBBj9E+sdEXAQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'sunxi-dt-for-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 6.15 - New board support: NetCube Systems Kumquat - Enable USB and LED on Anbernic RG35XX - Fix reboot GPIO detection logic on Anbernic RG35XX - Disable (non-existent) battery thermistor on Anbernic RG35XX - Add CPU OPP table for A100 * tag 'sunxi-dt-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a100: Add CPU Operating Performance Points table arm64: dts: allwinner: rg35xx: Add no-thermistor property for battery arm64: dts: allwinner: h700: Add USB Host for RG35XX-H arm64: dts: allwinner: h700: Add LED1 for Anbernic RG35XX arm64: dts: allwinner: h700: Set cpusldo to always-on for RG35XX ARM: dts: sunxi: add support for NetCube Systems Kumquat ARM: dts: sunxi: add uart1_pe pinctrl for sun8i-v3s dt-bindings: arm: sunxi: Add NetCube Systems Kumquat board dt-bindings: vendor-prefixes: Add NetCube Systems Austria name Link: https://lore.kernel.org/r/Z9LTOHJDY2p0lNG0@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'at91-dt-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.15 This update includes: - more controllers enabled for SAMA7D65 SoC (DMA, reset controller, shutdown controller, RTC, watchdog) - power monitor device enabled for SAMA7D65 Curiosity board - device tree cleanups * tag 'at91-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sama7g5: add ADC hw trigger edge type ARM: dts: microchip: sama7d65: Add watchdog for sama7d65 ARM: dts: microchip: sama7d65: Enable shutdown controller ARM: dts: microchip: sama7d65: Add SFRBU support to sama7d65 ARM: dts: microchip: sama7d65: Add RTC support for sama7d65 ARM: dts: microchip: sama7d65: Add Shutdown controller support ARM: dts: microchip: sama7d65: Add Reset Controller to sama7d65 SoC ARM: dts: microchip: fix faulty ohci/ehci node names ARM: dts: microchip: usb_a9263: fix wrong vendor ARM: dts: microchip: sama7d65: Enable DMAs ARM: dts: microchip: sama7d65: Add DMAs to sama7d65 SoC ARM: dts: microchip: sama7d65: Add chipID for sama7d65 ARM: dts: microchip: sama7d65_curiosity: Add power monitor support ARM: dts: microchip: sama7d65: Add flexcom 10 node ARM: dts: at91: usb_a9g20_lpw: use proper mmc node name ARM: dts: at91: calao_usb: fix button nodes ARM: dts: at91: use correct vendor name for Calao boards ARM: dts: at91: calao_usb: remove heartbeat for User LEDs ARM: dts: at91: calao_usb: fix wrong polarity for LED Link: https://lore.kernel.org/r/20250312173755.975074-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'stm32-dt-for-v6.15-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.15, round 1 Highlights: ---------- - MPU: - STM32MP13: - Add thermal support. - Add Priva E-Measuringbox board support based on sTM32MP133C SoC. It embeds Ethernet RMII with TI phy, SDCard, eMMC and some sensors. - Add support for DHCOR SoM and DHSBC rev.200 board: TPM interrupts and gpio reset + LDO2/LDO5 support. - STMP32MP15: - Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP. It contains eMMC for storage, a gigabit Ethernet, a CAN bus and a RS485 transceiver. - Add Plymovent AQM board based on STM32MP151 SoC. It embeds: ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S), Storage (SDCard, eMMC). - STM32MP25: - Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ... - Introduce STM32MP23 SoC and add STM32MP235F Discovery board: It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ... - Introduce STM32MP21 SoC and STM32MP215F discovery board: It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4, 1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo, LCD 18bit connector, CSI camera connector, ... * tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits) arm64: dts: st: add stm32mp215f-dk board support dt-bindings: stm32: document stm32mp215f-dk board arm64: dts: st: introduce stm32mp21 SoCs family arm64: dts: st: add stm32mp235f-dk board support dt-bindings: stm32: document stm32mp235f-dk board arm64: dts: st: introduce stm32mp23 SoCs family dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family arm64: dts: st: add stm32mp257f-dk board support dt-bindings: stm32: document stm32mp257f-dk board ARM: dts: stm32: Add Plymovent AQM devicetree ARM: dts: stm32: Add pinmux groups for Plymovent AQM board dt-bindings: arm: stm32: Add Plymovent AQM board dt-bindings: sound: convert ICS-43432 binding to YAML ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2 ARM: dts: stm32: add usr3 LED node to stm32f769-disco ARM: dts: stm32: rename LEDs nodes for stm32f769-disco ARM: dts: stm32: add push button to stm32f746 Discovery board ARM: dts: stm32: add led to stm32f746 Discovery board ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19ARM: dts: stm32: remove "snps,en-tx-lpi-clockgating" propertyRussell King (Oracle)
Whether the MII transmit clock can be stopped is primarily a property of the PHY (there is a capability bit that should be checked first.) Whether the MAC is capable of stopping the transmit clock is a separate issue, but this is already handled by the core DesignWare MAC code. As commit "net: stmmac: stm32: use PHY capability for TX clock stop" adds the flag to use the PHY capability, remove the DT property that is now unecessary. Cc: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tsIUA-005vGX-8A@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-16ARM: dts: qcom: Initial dts for LG Nexus 4Ivan Belokobylskiy
Add initial support for LG Nexus 4 (mako). Features currently working: regulators, eMMC, and volume keys. Signed-off-by: Ivan Belokobylskiy <belokobylskij@gmail.com> Co-developed-by: David Heidelberg <david@ixit.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250316-lg-nexus4-mako-v5-1-79feae815a85@ixit.cz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-14ARM: dts: qcom: msm8226-samsung-matisse-common: Enable modemMatti Lehtimäki
Enable modem remoteproc on samsung,matisse-wifi & matisselte. The mattisselte - being msm8926 - requires an extra mss-supply, so add that as well. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-13-2bc74b80e0ae@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-14ARM: dts: qcom: msm8926-htc-memul: Enable modemLuca Weiss
Enable the modem found on the MSM8926 HTC One Mini 2. Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-12-2bc74b80e0ae@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-14ARM: dts: qcom: Introduce dtsi for LTE-capable MSM8926Luca Weiss
MSM8926, while being 'just' an LTE-capable variant of MSM8226, the dts needs to slightly change since the modem doesn't use the ext-bhs-reg and needs mss-supply, therefore it gets a new compatible. Since we already have two -common.dtsi files which are used on both APQ8026/MSM8226 and MSM8926 devices, change the setup a bit by removing the SoC include from those and requiring the device dts to pick the correct one. Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-11-2bc74b80e0ae@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-14ARM: dts: qcom: msm8226: Add BAM DMUX Ethernet/IP deviceLuca Weiss
BAM DMUX is used as the network interface to the modem. Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-10-2bc74b80e0ae@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-14ARM: dts: qcom: msm8226: Add modem remoteproc nodeLuca Weiss
Add a node for the modem remoteproc found on MSM8226. Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-9-2bc74b80e0ae@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:50:26 +0000