summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2025-06-29Rewrite of propagate_umount()Al Viro
The variant currently in the tree has problems; trying to prove correctness has caught at least one class of bugs (reparenting that ends up moving the visible location of reparented mount, due to not excluding some of the counterparts on propagation that should've been included). I tried to prove that it's the only bug there; I'm still not sure whether it is. If anyone can reconstruct and write down an analysis of the mainline implementation, I'll gladly review it; as it is, I ended up doing a different implementation. Candidate collection phase is similar, but trimming the set down until it satisfies the constraints turned out pretty different. I hoped to do transformation as a massage series, but that turns out to be too convoluted. So it's a single patch replacing propagate_umount() and friends in one go, with notes and analysis in D/f/propagate_umount.txt (in addition to inline comments). As far I can tell, it is provably correct and provably linear by the number of mounts we need to look at in order to decide what should be unmounted. It even builds and seems to survive testing... Another nice thing that fell out of that is that ->mnt_umounting is no longer needed. Compared to the first version: * explicit MNT_UMOUNT_CANDIDATE flag for is_candidate() * trim_ancestors() only clears that flag, leaving the suckers on list * trim_one() and handle_locked() take the stuff with flag cleared off the list. That allows to iterate with list_for_each_entry_safe() when calling trim_one() - it removes at most one element from the list now. * no globals - I didn't bother with any kind of context, not worth it. * Notes updated accordingly; I have not touch the terms yet. Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-06-29Merge tag 'tty-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are five small serial and tty and vt fixes for 6.16-rc4. Included in here are: - kerneldoc fixes for recent vt changes - imx serial driver fix - of_node sysfs fix for a regression - vt missing notification fix - 8250 dt bindings fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive serial: imx: Restore original RXTL for console to fix data loss serial: core: restore of_node information in sysfs vt: fix kernel-doc warnings in ucs_get_fallback() vt: add missing notification when switching back to text mode
2025-06-29dt-bindings: iio: gyro: invensense,mpu3050: change irq maxItemsRodrigo Gobbi
The mpu3050 datasheet describes that this IC only supports one INT pin, which means one item with two cells inside binding. Change max to match this description. Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com> Fixes: 749787477ae4 ("dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250527215818.13000-1-rodrigo.gobbi.7@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29dt-bindings: iio: adc: adi,ad7606: fix dt_schema validation warningAngelo Dureghello
Fix following dt_schema warning when offload is used: DTC [C] arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb /home/angelo/dev-baylibre/linux-iio/arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb: adc@0: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'io-backends' is a required property from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# There isn't any reason that we couldn't have interrupts wired up at the same time we are using io-backends or SPI offload, so dropping off the related "oneOf" block entirely. Fixes: 81fe5529e812 ("dt-bindings: iio: adc: adi,ad7606: add SPI offload properties") Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20250526-wip-bl-ad7606-dtschema-fixes-v2-1-9bd56d039489@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29dt-bindings: serial: 8250: allow clock 'uartclk' and 'reg' for nxp,lpc1850-uartFrank Li
Allow clock 'uartclk' and 'reg' for nxp,lpc1850-uart to align existed driver and dts. It is really old platform. Keep the same restriction for others. Allow dmas and dma-names property, which allow maxItems 4 because very old platform (arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi) use duplicate "tx", "rx", "tx", "rx" as dma-names. Fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: serial@40081000 (nxp,lpc1850-uart): clock-names: ['uartclk', 'reg'] is too long Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250602142745.942568-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-28dt-bindings: usb: genesys,gl850g: add downstream facing portsDmitry Baryshkov
In order to describe connections between Genesys GL850G hub and corresponding Type-C connectors, follow example of RTS5411 and describe downstream facing ports. Unline normal case of ports being connected to a USB device, hotplug ports use OF graph representation. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250608-genesys-ports-v1-2-09ca19f6838e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-28dt-bindings: usb: genesys,gl850g: use usb-hub.yamlDmitry Baryshkov
In order to reduce duplication, switch GL850G to use USB hub bindings instead of using simple usb-device.yaml Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250608-genesys-ports-v1-1-09ca19f6838e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27Merge tag 'cxl-fixes-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull Compute Express Link (CXL) fixes from Dave Jiang: "These fixes address a few issues in the CXL subsystem, including dealing with some bugs in the CXL EDAC and RAS drivers: - Fix return value of cxlctl_validate_set_features() - Fix min_scrub_cycle of a region miscaculation and add additional documentation - Fix potential memory leak issues for CXL EDAC - Fix CPER handler device confusion for CXL RAS - Fix using wrong repair type to check DRAM event record" * tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/edac: Fix using wrong repair type to check dram event record cxl/ras: Fix CPER handler device confusion cxl/edac: Fix potential memory leak issues cxl/Documentation: Add more description about min/max scrub cycle cxl/edac: Fix the min_scrub_cycle of a region miscalculation cxl: fix return value in cxlctl_validate_set_features()
2025-06-27dpll: add reference-sync netlink attributeArkadiusz Kubalewski
Add new netlink attribute to allow user space configuration of reference sync pin pairs, where both pins are used to provide one clock signal consisting of both: base frequency and sync signal. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Milena Olech <milena.olech@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://patch.msgid.link/20250626135219.1769350-2-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27doc: tls: socket needs to be established to enable ulpUlrich Weber
To enable TLS ulp socket needs to be in established state. This was added in commit d91c3e17f75f ("net/tls: Only attach to sockets in ESTABLISHED state"), in 2018. Signed-off-by: Ulrich Weber <ulrich.weber@gmail.com> Link: https://patch.msgid.link/20250626145618.15464-1-ulrich.weber@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27docs: netdev: correct the heading level for co-posting selftestsJakub Kicinski
"Co-posting selftests" belongs in the "netdev patch review" section, same as "co-posting changes to user space components". It was erroneously added as its own section. Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://patch.msgid.link/20250626182055.4161905-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: dsa: Rewrite Micrel KS8995 in schemaLinus Walleij
After studying the datasheets for some of the KS8995 variants it becomes pretty obvious that this is a straight-forward and simple MII DSA switch with one port in (CPU) and four outgoing ports, and it even supports custom tags by setting a bit in a special register, and elaborate VLAN handling as all DSA switches do. What is a bit odd with KS8995 is that it uses an extra MII-P5 port to access one of the PHYs separately, on the side of the switch fabric, such as when using a WAN port separately from a LAN switch in a home router. Rewrite the terse bindings to YAML, and move to the proper subdirectory. Include a verbose example to make things clear. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250625-ks8995-dsa-bindings-v2-1-ce71dce9be0b@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: net: sun8i-emac: Add A100 EMAC compatiblePaul Kocialkowski
The Allwinner A100/A133 has an Ethernet MAC (EMAC) controller that is compatible with the A64 one. It features the same syscon registers for control of the top-level integration of the unit. Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250626080923.632789-4-paulk@sys-base.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: net/nfc: ti,trf7970a: Add ti,rx-gain-reduction-db optionPaul Geurts
Add option to reduce the RX antenna gain to be able to reduce the sensitivity. Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250626141242.3749958-2-paul.geurts@prodrive-technologies.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: net: convert lpc-eth.txt yaml formatFrank Li
Convert lpc-eth.txt yaml format. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250624202028.2516257-1-Frank.Li@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27timekeeping: Provide interface to control auxiliary clocksThomas Gleixner
Auxiliary clocks are disabled by default and attempts to access them fail. Provide an interface to enable/disable them at run-time. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <jstultz@google.com> Link: https://lore.kernel.org/all/20250625183758.444626478@linutronix.de
2025-06-27dt-bindings: reset: sophgo: Add CV1800B supportInochi Amaoto
Add bindings for the reset generator on the SOPHGO CV1800B RISC-V SoC. Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250617070144.1149926-2-inochiama@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/V2N SoC supportLad Prabhakar
Document support for the USB2PHY reset controller found on the Renesas RZ/V2N (R9A09G056) SoC. The reset controller IP is functionally identical to that on the RZ/V2H(P) SoC, so no driver changes are needed. The existing `renesas,r9a09g057-usb2phy-reset` compatible will be used as a fallback for the RZ/V2N SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250528133031.167647-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: reset: convert nxp,lpc1850-rgu.txt to yaml formatFrank Li
Convert nxp,lpc1850-rgu.txt to yaml format. Additional changes: - remove label in example. - remove reset consumer in example. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250602144046.943982-1-Frank.Li@nxp.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: reset: add support for canaan,k230-rstJunhui Liu
Introduces a reset controller driver for the Kendryte K230 SoC, resposible for managing the reset functionality of the CPUs and various sub-modules. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech> Link: https://lore.kernel.org/r/20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: leds: lp50xx: Document child reg, fix exampleJohan Adolfsson
The led child reg node is the index within the bank, document that and update the example accordingly. The reg property in child node is limited to 0-2 since there are 3 leds per bank, previous value in example was speculative. Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250617-led-fix-v7-2-cdbe8efc88fa@axis.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-06-27drm/i915/flipq: Provide the nuts and bolts code for flip queueVille Syrjälä
Provide the lower level code for PIPEDMC based flip queue. We'll use the so called semi-full flip queue mode where the PIPEDMC will start the provided DSB on a scanline a little ahead of the vblank. We need to program the triggering scanline early enough so that the DSB has enough time to complete writing all the double buffered registers before they get latched (at start of vblank). The firmware implements several queues: - 3 "plane queues" which execute a single DSB per entry - 1 "general queue" which can apparently execute 2 DSBs per entry - 1 vestigial "fast queue" that replaced the "simple flip queue" on ADL+, but this isn't supposed to be used due to issues. But we only need a single plane queue really, and we won't actually use it as a real queue because we don't allow queueing multiple commits ahead of time. So the whole thing is perhaps useless. I suppose there migth be some power saving benefits if we would get the flip scheduled by userspace early and then could keep some hardware powered off a bit longer until the DMC kicks off the flipq programming. But that is pure speculation at this time and needs to be proven. The code to hook up the flip queue into the actual atomic commit path will follow later. TODO: need to think how to do the "wait for DMC firmware load" nicely need to think about VRR and PSR etc. v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl Don't oops at flipq init if there is no dmc v3: Adapt to PTL+ flipq changes (different queue entry layout, different trigger event, need VRR TG) Use the actual CDCLK frequency Ask the DSB code how long things are expected to take v3: Adjust the cdclk rounding (docs are 100% vague, Windows rounds like this) Initialize some undocumented magic DMC variables on PTL v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in PIPEDMC_FQ_CTRL is apparently gone on LNL+) Based the preempt timeout on the max exec time Preempt before disabling the flip queue Order the PIPEDMC_SCANLINECMP* writes a bit more carefully Fix some typos v5: Try to deal with some clang-20 div-by-zero false positive (Nathan) Add some docs (Jani) Cc: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> epr Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
2025-06-27dt-bindings: net: Document support for Airoha AN7583 MDIO ControllerChristian Marangi
Airoha AN7583 SoC have 3 different MDIO Controller. One comes from the intergated Switch based on MT7530. The other 2 live under the SCU register and expose 2 dedicated MDIO controller. Document the schema for the 2 dedicated MDIO controller. Each MDIO controller can be independently reset with the SoC reset line. Each MDIO controller have a dedicated clock configured to 2.5MHz by default to follow MDIO bus IEEE 802.3 standard. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-27dt-bindings: memory-controller: Define fallback compatibleFlorian Fainelli
All of the DDR controllers beyond revision b.2.1 have had a consistent layout, therefore define a "brcm,brcmstb-memc-ddr-rev-b.2.1" fallback compatible string to match them all rather than having to continuously add to the list. Link: https://lore.kernel.org/all/20241217194439.929040-2-florian.fainelli@broadcom.com/ Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250609212356.2264244-2-florian.fainelli@broadcom.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-06-26dt-bindings: interrupt-controller: Add arm,armv7m-nvic and fix #interrupt-cellsFrank Li
According to existed dts arch/arm/boot/dts/armv7-m.dtsi and driver drivers/irqchip/irq-nvic.c, compatible string should be arm,armv7m-nvic, Fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dtb: /interrupt-controller@e000e100: failed to match any schema with compatible: ['arm,armv7m-nvic'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250624224630.2518776-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-26dt-bindings: trivial-devices: add compatible string nxp,isp1301 from isp1301.txtFrank Li
Delete isp1301.txt and add compatible string nxp,isp1301 to trivial-devices because this i2c device have only reg propepty. Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250623204048.2493819-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-26dt-bindings: net: Rename renesas,r9a09g057-gbeth.yamlGeert Uytterhoeven
The DT bindings file "renesas,r9a09g057-gbeth.yaml" applies to a whole family of SoCs, and uses "renesas,rzv2h-gbeth" as a fallback compatible value. Hence rename it to the more generic "renesas,rzv2h-gbeth.yaml". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/721f6e0e09777e0842ecaca4578bc50c953d2428.1750838954.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27Merge tag 'drm-misc-next-2025-06-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.17: UAPI Changes: Cross-subsystem Changes: Core Changes: - ci: Add Device tree validation and kunit - connector: Move HDR sink metadat to drm_display_info Driver Changes: - bochs: drm_panic Support - panfrost: MT8370 Support - bridge: - tc358767: Convert to devm_drm_bridge_alloc() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250626-sincere-loon-of-effort-6dbdf9@houat
2025-06-27spi: dt-bindings: add nxp,lpc3220-spi.yamlFrank Li
Add lpc3220 spi controller binding doc to fix below CHECK_DTBS warning: arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dtb: /ahb/apb/spi@20088000: failed to match any schema with compatible: ['nxp,lpc3220-spi'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250625215255.2640538-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-26dt-bindings: net: wireless: ath11k-pci: describe firmware-name propertyMiaoqing Pan
Introduce 'firmware-name' property to allow end-users and/or integrators to decide which usecase-specific firmware to run on the WCN6855. This is necessary due to resource limitations such as memory capacity and CPU capability, or performance and power optimization for different application scenarios. Two firmwares are supported: 'WCN6855/hw2.0' and 'WCN6855/hw2.0/nfa765'. The former is the default firmware, suitable for most WiFi 6 STA functions. The latter adds support for commercial-quality SAP and optimizes power consumption for IoT applications. Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20250522013444.1301330-2-miaoqing.pan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-26dt-bindings: net: wireless: ath9k: add WIFI bindingsRosen Penev
These are for the wireless chips that come built in with various Atheros/QCA SoCs. dts wise, the difference between pcie and the wmac is AHB > PCIE > WIFI AHB > WIFI Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250609030851.17739-4-rosenp@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-26Merge tag 'devicetree-fixes-for-6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were applied for nios2, but never sent upstream. - Fix extra '/' in fsl,ls1028a-reset '$id' path - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref. * tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Convert altr,uart-1.0 to DT schema dt-bindings: serial: Convert altr,juart-1.0 to DT schema dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
2025-06-26dt-bindings: iio: adc: ad7768-1: add trigger-sources propertyJonathan Santos
In addition to GPIO synchronization, The AD7768-1 also supports synchronization over SPI, which use is recommended when the GPIO cannot provide a pulse synchronous with the base MCLK signal. It consists of looping back the SYNC_OUT to the SYNC_IN pin and send a command via SPI to trigger the synchronization. Introduce the 'trigger-sources' property to enable SPI-based synchronization via SYNC_OUT pin, along with additional optional entries for GPIO3 and DRDY pins. Also create #trigger-source-cells property to differentiate the trigger sources provided by the ADC. To improve readability, create a adi,ad7768-1.h header with the macros for the cell values. While at it, add description to the interrupts property. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: David Lechner <dlechner@baylirbe.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/713fd786010c75858700efaec8bb285274e7057e.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: iio: adc: ad7768-1: Document GPIO controllerJonathan Santos
The AD7768-1 ADC exports four bidirectional GPIOs accessible via register map. Document GPIO properties necessary to enable GPIO controller for this device. Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/2ac34fc1e0b02886073ae0bb196c7e8d4d442c3f.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: iio: adc: ad7768-1: document regulator provider propertyJonathan Santos
The AD7768-1 provides a buffered common-mode voltage output on the VCM pin that can be used to bias analog input signals. Add regulators property to enable the use of the VCM output, referenced here as vcm-output, by any other device. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/33c02a1fb9d839f62da5237f9476ccbf14271b6d.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: trigger-source: add generic GPIO trigger sourceJonathan Santos
Inspired by pwm-trigger, create a new binding for using a GPIO line as a trigger source. Link: https://lore.kernel.org/linux-iio/20250207-dlech-mainline-spi-engine-offload-2-v8-3-e48a489be48c@baylibre.com/ Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/c4a3a7c828c711b439d1893271b8376823176ea6.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: iio: adc: add ad7405Pop Ioan Daniel
Add devicetree bindings for ad7405/adum770x family. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com> Link: https://patch.msgid.link/20250605150948.3091827-5-pop.ioan-daniel@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml 9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names") ec362192aa9e ("netlink: specs: fix up indentation errors") https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au Adjacent changes: Documentation/netlink/specs/fou.yaml 791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names") 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc3Alexei Starovoitov
Cross-merge BPF, perf and other fixes after downstream PRs. It restores BPF CI to green after critical fix commit bc4394e5e79c ("perf: Fix the throttle error of some clock events") No conflicts. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-06-26Merge tag 'net-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and wireless. Current release - regressions: - bridge: fix use-after-free during router port configuration Current release - new code bugs: - eth: wangxun: fix the creation of page_pool Previous releases - regressions: - netpoll: initialize UDP checksum field before checksumming - wifi: mac80211: finish link init before RCU publish - bluetooth: fix use-after-free in vhci_flush() - eth: - ionic: fix DMA mapping test - bnxt: properly flush XDP redirect lists Previous releases - always broken: - netlink: specs: enforce strict naming of properties - unix: don't leave consecutive consumed OOB skbs. - vsock: fix linux/vm_sockets.h userspace compilation errors - selftests: fix TCP packet checksum" * tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) net: libwx: fix the creation of page_pool net: selftests: fix TCP packet checksum atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). netlink: specs: enforce strict naming of properties netlink: specs: tc: replace underscores with dashes in names netlink: specs: rt-link: replace underscores with dashes in names netlink: specs: mptcp: replace underscores with dashes in names netlink: specs: ovs_flow: replace underscores with dashes in names netlink: specs: devlink: replace underscores with dashes in names netlink: specs: dpll: replace underscores with dashes in names netlink: specs: ethtool: replace underscores with dashes in names netlink: specs: fou: replace underscores with dashes in names netlink: specs: nfsd: replace underscores with dashes in names net: enetc: Correct endianness handling in _enetc_rd_reg64 atm: idt77252: Add missing `dma_map_error()` bnxt: properly flush XDP redirect lists vsock/uapi: fix linux/vm_sockets.h userspace compilation errors wifi: mac80211: finish link init before RCU publish wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version selftest: af_unix: Add tests for -ECONNRESET. ...
2025-06-26drm/gpusvm, drm/pagemap: Move migration functionality to drm_pagemapMatthew Brost
The migration functionality and track-keeping of per-pagemap VRAM mapped to the CPU mm is not per GPU_vm, but rather per pagemap. This is also reflected by the functions not needing the drm_gpusvm structures. So move to drm_pagemap. With this, drm_gpusvm shouldn't really access the page zone-device-data since its meaning is internal to drm_pagemap. Currently it's used to reject mapping ranges backed by multiple drm_pagemap allocations. For now, make the zone-device-data a void pointer. Alter the interface of drm_gpusvm_migrate_to_devmem() to ensure we don't pass a gpusvm pointer. Rename CONFIG_DRM_XE_DEVMEM_MIRROR to CONFIG_DRM_XE_PAGEMAP. Matt is listed as author of this commit since he wrote most of the code, and it makes sense to retain his git authorship. Thomas mostly moved the code around. v3: - Kerneldoc fixes (CI) - Don't update documentation about how the drm_pagemap migration should be interpreted until upcoming patches where the functionality is implemented. (Matt Brost) v4: - More kerneldoc fixes around timeslice_ms (Himal Ghimiray, Matt Brost) v6: - Fix an uninitialized pagemap pointer (CI) Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250619134035.170086-2-thomas.hellstrom@linux.intel.com
2025-06-26platform/x86: wmi: Update documentation of WCxx/WExx ACPI methodsArmin Wolf
Inform potential firmware developers that WExx ACPI methods are always called by the WMI driver core even if the associated WMI event is not marked as being expensive. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250619221440.6737-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-26dt-bindings: interrupt-controller: Add MIPS P8700 aclint-sswiVladimir Kondratiev
Add ACLINT-SSWI variant for the MIPS P8700 SoC. This CPU has a SSWI device compliant with the RISC-V draft spec (see [1]). CPU indexes on this platform are not continuous, instead it uses bit-fields to encode hart,core,cluster numbers, thus the DT property "riscv,hart-indexes" is mandatory for it. Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/all/20250612143911.3224046-4-vladimir.kondratiev@mobileye.com Link: https://github.com/riscvarchive/riscv-aclint [1]
2025-06-26docs: net: sysctl documentation cleanupAbdelrahman Fekry
Add missing default values for networking sysctl parameters and standardize documentation: - Use "0 (disabled)" / "1 (enabled)" format consistently - Fix cipso_rbm_struct_valid -> cipso_rbm_strictvalid typo - Convert fwmark_reflect description to enabled/disabled terminology - Document possible values for tcp_autocorking Also addresses formatting inconsistencies in touched parameters. Signed-off-by: Abdelrahman Fekry <abdelrahmanfekry375@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://patch.msgid.link/20250624150923.40590-1-abdelrahmanfekry375@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-26checkpatch: check for comment explaining rgmii(|-rxid|-txid) PHY modesMatthias Schiffer
Historically, the RGMII PHY modes specified in Device Trees have been used inconsistently, often referring to the usage of delays on the PHY side rather than describing the board; many drivers still implement this incorrectly. Require a comment in Devices Trees using these modes (usually mentioning that the delay is realized on the PCB), so we can avoid adding more incorrect uses (or will at least notice which drivers still need to be fixed). Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/bc112b8aa510cf9df9ab33178d122f234d0aebf7.1750756583.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-26dt-bindings: net: ti: k3-am654-cpsw-nuss: update phy-mode in exampleMatthias Schiffer
k3-am65-cpsw-nuss controllers have a fixed internal TX delay, so RXID mode is not actually possible and will result in a warning from the driver going forward. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://patch.msgid.link/f9b5e84fcaf565506ed86cf1838444c2bc47334f.1750756583.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-26dt-bindings: display: ti: Add schema for AM625 OLDI TransmitterAradhya Bhatia
The OLDI transmitters (TXes) do not have registers of their own, and are dependent on the source video-ports (VPs) from the DSS to provide configuration data. This hardware doesn't directly sit on the internal bus of the SoC, but does so via the DSS. Hence, the OLDI TXes are supposed to be child nodes under the DSS, and not independent devices. Two of the OLDI TXes can function in tandem to output dual-link OLDI output, or cloned single-link outputs. In these cases, one OLDI will be the primary OLDI, and the other one, a companion. The following diagram represents such a configuration. +-----+-----+ +-------+ | | | | | | | VP1 +----+--->+ OLDI0 | (Primary - may need companion) | | | | | | | DSS +-----+ | +-------+ | | | | | | VP2 | | +-------+ | | | | | | +-----+-----+ +--->+ OLDI1 | (Companion OLDI) | | +-------+ The DSS in AM625 SoC has a configuration like the one above. The AM625 DSS VP1 (port@0) can connect and control 2 OLDI TXes, to use them in dual-link or cloned single-link OLDI modes. It is only the VP1 that can connect to either OLDI TXes for the AM625 DSS, and not the VP2. Alternatively, on some future TI SoCs, along with the above configuration, the OLDI TX can _also_ connect to separate video sources, making them work entirely independent of each other. In this case, neither of the OLDIs are "companion" or "secondary" OLDIs, and nor do they require one. They both are independent and primary OLDIs. The following diagram represents such a configuration. +-----+-----+ +-------+ | | | | | | | VP1 +--+----------->+ OLDI0 | (Primary - may need companion) | | | | | | | +-----+ | +-------+ | | | | | | VP2 | | | | | | | DSS +-----+ | +---+ +-------+ | | | +-->+ M | | | | | VP3 +----->+ U +--->+ OLDI1 | (Companion or Primary) | | | | X | | | | +-----+ +---+ +-------+ | | | | | VP4 | | | | +-----+-----+ Note that depending on the mux configuration, the OLDIs can either be working together in tandem - sourced by VP1, OR, they could be working independently sourced by VP1 and VP3 respectively. The idea is to support all the configurations with this OLDI TX schema. The OLDI functionality is further supported by a system-control module, which contains a few registers to control OLDI IO power and other electrical characteristics of the IO lanes. Add devicetree binding schema for the OLDI TXes to support various configurations, and extend their support to the AM625 DSS. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250528122544.817829-3-aradhya.bhatia@linux.dev Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2025-06-26dt-bindings: display: ti,am65x-dss: Re-indent the exampleAradhya Bhatia
Reduce tab size from 8 spaces to 4 spaces to make the bindings consistent, and easy to expand. Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Link: https://lore.kernel.org/r/20250528122544.817829-2-aradhya.bhatia@linux.dev Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2025-06-25Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Alexei Starovoitov: - Fix use-after-free in libbpf when map is resized (Adin Scannell) - Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name (Jerome Marchand) - Fix verifier assumption of nullness of d_inode in dentry (Song Liu) - Fix global starvation of LRU map (Willem de Bruijn) - Fix potential NULL dereference in btf_dump__free (Yuan Chen) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: adapt one more case in test_lru_map to the new target_free libbpf: Fix possible use-after-free for externs selftests/bpf: Convert test_sysctl to prog_tests bpf: Specify access type of bpf_sysctl_get_name args libbpf: Fix null pointer dereference in btf_dump__free on allocation failure bpf: Adjust free target to avoid global starvation of LRU map bpf: Mark dentry->d_inode as trusted_or_null
2025-06-25Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull mount fixes from Al Viro: "Several mount-related fixes" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: userns and mnt_idmap leak in open_tree_attr(2) attach_recursive_mnt(): do not lock the covering tree when sliding something under it replace collect_mounts()/drop_collected_mounts() with a safer variant
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:04:11 +0000