| Age | Commit message (Collapse) | Author |
|---|
|
Add bindings for the reset generator on the SOPHGO CV1800B
RISC-V SoC.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250617070144.1149926-2-inochiama@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Document support for the USB2PHY reset controller found on the Renesas
RZ/V2N (R9A09G056) SoC. The reset controller IP is functionally identical
to that on the RZ/V2H(P) SoC, so no driver changes are needed. The existing
`renesas,r9a09g057-usb2phy-reset` compatible will be used as a fallback
for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250528133031.167647-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Convert nxp,lpc1850-rgu.txt to yaml format.
Additional changes:
- remove label in example.
- remove reset consumer in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250602144046.943982-1-Frank.Li@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Introduces a reset controller driver for the Kendryte K230 SoC,
resposible for managing the reset functionality of the CPUs and
various sub-modules.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
All of the DDR controllers beyond revision b.2.1 have had a consistent
layout, therefore define a "brcm,brcmstb-memc-ddr-rev-b.2.1" fallback
compatible string to match them all rather than having to continuously
add to the list.
Link: https://lore.kernel.org/all/20241217194439.929040-2-florian.fainelli@broadcom.com/
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250609212356.2264244-2-florian.fainelli@broadcom.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
According to existed dts arch/arm/boot/dts/armv7-m.dtsi and driver
drivers/irqchip/irq-nvic.c, compatible string should be arm,armv7m-nvic,
Fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dtb: /interrupt-controller@e000e100:
failed to match any schema with compatible: ['arm,armv7m-nvic']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250624224630.2518776-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Delete isp1301.txt and add compatible string nxp,isp1301 to trivial-devices
because this i2c device have only reg propepty.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250623204048.2493819-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add lpc3220 spi controller binding doc to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dtb: /ahb/apb/spi@20088000: failed to match any schema with compatible: ['nxp,lpc3220-spi']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250625215255.2640538-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
|
|
In addition to GPIO synchronization, The AD7768-1 also supports
synchronization over SPI, which use is recommended when the GPIO
cannot provide a pulse synchronous with the base MCLK signal. It
consists of looping back the SYNC_OUT to the SYNC_IN pin and send
a command via SPI to trigger the synchronization.
Introduce the 'trigger-sources' property to enable SPI-based
synchronization via SYNC_OUT pin, along with additional optional
entries for GPIO3 and DRDY pins.
Also create #trigger-source-cells property to differentiate the trigger
sources provided by the ADC. To improve readability, create a
adi,ad7768-1.h header with the macros for the cell values.
While at it, add description to the interrupts property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylirbe.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/713fd786010c75858700efaec8bb285274e7057e.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD7768-1 ADC exports four bidirectional GPIOs accessible
via register map.
Document GPIO properties necessary to enable GPIO controller for this
device.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/2ac34fc1e0b02886073ae0bb196c7e8d4d442c3f.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD7768-1 provides a buffered common-mode voltage output
on the VCM pin that can be used to bias analog input signals.
Add regulators property to enable the use of the VCM output,
referenced here as vcm-output, by any other device.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/33c02a1fb9d839f62da5237f9476ccbf14271b6d.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Inspired by pwm-trigger, create a new binding for using a GPIO
line as a trigger source.
Link: https://lore.kernel.org/linux-iio/20250207-dlech-mainline-spi-engine-offload-2-v8-3-e48a489be48c@baylibre.com/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/c4a3a7c828c711b439d1893271b8376823176ea6.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree bindings for ad7405/adum770x family.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com>
Link: https://patch.msgid.link/20250605150948.3091827-5-pop.ioan-daniel@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- bridge: fix use-after-free during router port configuration
Current release - new code bugs:
- eth: wangxun: fix the creation of page_pool
Previous releases - regressions:
- netpoll: initialize UDP checksum field before checksumming
- wifi: mac80211: finish link init before RCU publish
- bluetooth: fix use-after-free in vhci_flush()
- eth:
- ionic: fix DMA mapping test
- bnxt: properly flush XDP redirect lists
Previous releases - always broken:
- netlink: specs: enforce strict naming of properties
- unix: don't leave consecutive consumed OOB skbs.
- vsock: fix linux/vm_sockets.h userspace compilation errors
- selftests: fix TCP packet checksum"
* tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: libwx: fix the creation of page_pool
net: selftests: fix TCP packet checksum
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
netlink: specs: enforce strict naming of properties
netlink: specs: tc: replace underscores with dashes in names
netlink: specs: rt-link: replace underscores with dashes in names
netlink: specs: mptcp: replace underscores with dashes in names
netlink: specs: ovs_flow: replace underscores with dashes in names
netlink: specs: devlink: replace underscores with dashes in names
netlink: specs: dpll: replace underscores with dashes in names
netlink: specs: ethtool: replace underscores with dashes in names
netlink: specs: fou: replace underscores with dashes in names
netlink: specs: nfsd: replace underscores with dashes in names
net: enetc: Correct endianness handling in _enetc_rd_reg64
atm: idt77252: Add missing `dma_map_error()`
bnxt: properly flush XDP redirect lists
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
selftest: af_unix: Add tests for -ECONNRESET.
...
|
|
Inform potential firmware developers that WExx ACPI methods are
always called by the WMI driver core even if the associated WMI event
is not marked as being expensive.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250619221440.6737-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add ACLINT-SSWI variant for the MIPS P8700 SoC. This CPU has a SSWI device
compliant with the RISC-V draft spec (see [1]).
CPU indexes on this platform are not continuous, instead it uses bit-fields
to encode hart,core,cluster numbers, thus the DT property
"riscv,hart-indexes" is mandatory for it.
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/20250612143911.3224046-4-vladimir.kondratiev@mobileye.com
Link: https://github.com/riscvarchive/riscv-aclint [1]
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix use-after-free in libbpf when map is resized (Adin Scannell)
- Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name
(Jerome Marchand)
- Fix verifier assumption of nullness of d_inode in dentry (Song Liu)
- Fix global starvation of LRU map (Willem de Bruijn)
- Fix potential NULL dereference in btf_dump__free (Yuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: adapt one more case in test_lru_map to the new target_free
libbpf: Fix possible use-after-free for externs
selftests/bpf: Convert test_sysctl to prog_tests
bpf: Specify access type of bpf_sysctl_get_name args
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
bpf: Adjust free target to avoid global starvation of LRU map
bpf: Mark dentry->d_inode as trusted_or_null
|
|
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
|
|
Add a regexp to make sure all names which may end up being visible
to the user consist of lower case characters, numbers and dashes.
Underscores keep sneaking into the specs, which is not visible
in the C code but makes the Python and alike inconsistent.
Note that starting with a number is okay, as in C the full
name will include the family name.
For legacy families we can't enforce the naming in the family
name or the multicast group names, as these are part of the
binary uAPI of the kernel.
For classic netlink we need to allow capital letters in names
of struct members. TC has some structs with capitalized members.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 93b230b549bc ("netlink: specs: add ynl spec for ovs_flow")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20250624211002.3475021-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes")
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 4eb77b4ecd3c ("netlink: add a proto specification for FOU")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 13727f85b49b ("NFSD: introduce netlink stubs")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Describe this SPI-/I2C-Compatible, 10-Bit Digital Temperature Sensor and
8-Channel ADC. The driver is in hwmon for ages.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250608162240.3023-2-wsa+renesas@sang-engineering.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Merge series from Clément Le Goffic <clement.legoffic@foss.st.com>:
This series aims to improve the STM32 SPI driver in different areas.
It adds SPI_READY mode, fixes an issue raised by a kernel bot,
add the ability to use DMA-MDMA chaining for RX and deprecate an ST bindings
vendor property.
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu, like below
--- ALSA for SoC audio support
Analog Devices --->
AMD --->
Apple --->
Atmel --->
Au1x ----
Broadcom --->
Cirrus Logic --->
DesignWare --->
Freescale --->
Google --->
Hisilicon --->
...
One concern is *vender folder* alphabetical order vs *vender name*
alphabetical order were different. For example "sunxi" menu is
"Allwinner".
Link: https://lore.kernel.org/r/8734c8bf3l.wl-kuninori.morimoto.gx@renesas.com
|
|
Add proper indentations to bullet list items to resolve the warning:
"Bullet list ends without a blank line; unexpected unindent."
Closes:https://lore.kernel.org/kvm/20250623162110.6e2f4241@canb.auug.org.au/
Fixes: cf207eac06f6 ("KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>")
Fixes: 25e8b1dd4883 ("KVM: TDX: Exit to userspace for GetTdVmCallInfo")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250625014829.82289-1-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend the TH1520 AON to describe the GPU clkgen reset line, required
for proper GPU clock and reset sequencing.
The T-HEAD TH1520 GPU requires coordinated management of two clocks
(core and sys) and two resets (GPU core reset and GPU clkgen reset).
Only the clkgen reset is exposed at the AON level, to support SoC
specific initialization handled through a dedicated auxiliary power
sequencing driver. The GPU core reset remains described in the GPU
device node, as from the GPU driver's perspective, there is only a
single reset line [1].
This follows upstream maintainers' recommendations [2] to abstract SoC
specific details into the PM domain layer rather than exposing them to
drivers directly.
Link: https://lore.kernel.org/all/816db99d-7088-4c1a-af03-b9a825ac09dc@imgtec.com/ - [1]
Link: https://lore.kernel.org/all/38d9650fc11a674c8b689d6bab937acf@kernel.org/ - [2]
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250623-apr_14_for_sending-v6-2-6583ce0f6c25@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Change "resourse" into "resource" in the name of a sysfs attribute.
Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The vendor `st,spi-midi-ns` property is no longer needed and
has been deprecated in favor of a generic solution.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-6-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add MDMA channel, and new sram property which are mandatory to enable
SPI Rx DMA-MDMA chaining.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-3-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The support for Sophgo CV1800 series SoC introduces a wildcard compatible
string "sophgo,cv1800-usb", rename it to sophgo,cv1800b-usb to match a
real world SoC. As the compatible string is not used in any board dts.
It is safe to rename it.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250618031132.373216-2-inochiama@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add irq_hpd sysfs node to displayport driver. This allows the userspace
to subscribe to irq events similar to how it can subscribe to changes in
hpd.
irq_hpd is read only and returns the number of irq events generated since
driver probe. pending_irq_hpd is added so that a sysfs_emit can be
generated if the HPD high event belonging to the same status message
is delayed until a successful configuration.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250623204947.732915-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit below added a new helper, but omitted to move (and add) the
corressponding kernel-doc. Do it now.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 2b5eac0f8c6e ("tty: introduce and use tty_port_tty_vhangup() helper")
Link: https://lore.kernel.org/all/b23d566c-09dc-7374-cc87-0ad4660e8b2e@linux.intel.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20250624080641.509959-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MMC/SD controller from Mobileye is compatible with cdns,sd4hc, but
will need the preset broken value quirk for speed slower than HS200.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Link: https://lore.kernel.org/r/9b34b471d1e71cf47c503aed7145fab896767ba7.1750156323.git.benoit.monin@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc-controller.yaml
Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
imx23/imx28 use dual mode controller (spi and mmc). So default dts node
name use spi instead of mmc. The legacy reason, it use difference
compatible string to distringuish work mode (spi / mmc).
Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi@80010000 (fsl,imx23-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$'
Additional add clocks property.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250603152245.1068740-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/0703ecbc355164e35b90a9fe088438c821f13cd3.1749741263.git.geert+renesas@glider.be
|
|
Merge series from Conor Dooley <conor@kernel.org>:
This is a v2 of a patchset I sent about this time last year, adding the
regular transfer_one_message op to the microchip-core-qspi driver. In that
v1 Mark expressed his dislike for that op, so v2 is using
prepare/unprepare/transfer_one instead. The unprepare implementation still
contains the 750 us delay that the driver had back in v1. I've heard a
suggestion internally as to why this is needed, but it was unsubstantiated,
so I still have no justification for it. I held off on sending a v2 because
of a lack of explanation for the delay, but I don't wanna hold off forever
for something I might never understand.
|
|
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c59b0 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for the DVFSRC regulators found on the MediaTek
MT8196 Chromebook SoC and the (unrelated) MT6893 Dimensity 1200.
|
|
Add a compatible for the MediaTek MT8196 Chromebook SoC's
regulators over DVFSRC.
This SoC has only one regulator "dvfsrc-vcore" and different
values for vsel compared to the others.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250623120144.109359-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible for the MediaTek Dimensity 1200 (MT6893) SoC's
regulators over DVFSRC.
This SoC uses different values for the vsel, hence it is not
compatible with the currently supported ones.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250623120144.109359-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, disks primarily implement the write zeroes command (aka
REQ_OP_WRITE_ZEROES) through two mechanisms: the first involves
physically writing zeros to the disk media (e.g., HDDs), while the
second performs an unmap operation on the logical blocks, effectively
putting them into a deallocated state (e.g., SSDs). The first method is
generally slow, while the second method is typically very fast.
For example, on certain NVMe SSDs that support NVME_NS_DEAC, submitting
REQ_OP_WRITE_ZEROES requests with the NVME_WZ_DEAC bit can accelerate
the write zeros operation by placing disk blocks into a deallocated
state, which opportunistically avoids writing zeroes to media while
still guaranteeing that subsequent reads from the specified block range
will return zeroed data. This is a best-effort optimization, not a
mandatory requirement, some devices may partially fall back to writing
physical zeroes due to factors such as misalignment or being asked to
clear a block range smaller than the device's internal allocation unit.
Therefore, the speed of this operation is not guaranteed.
It is difficult to determine whether the storage device supports unmap
write zeroes operation. We cannot determine this by only querying
bdev_limits(bdev)->max_write_zeroes_sectors. Therefore, first, add a new
hardware queue limit parameters, max_hw_wzeroes_unmap_sectors, to
indicate whether a device supports this unmap write zeroes operation.
Then, add two new counterpart software queue limits,
max_wzeroes_unmap_sectors and max_user_wzeroes_unmap_sectors, which
allow users to disable this operation if the speed is very slow on some
sepcial devices.
Finally, for the stacked devices cases, initialize these two parameters
to UINT_MAX. This operation should be enabled by both the stacking
driver and all underlying devices.
Thanks to Martin K. Petersen for optimizing the documentation of the
write_zeroes_unmap sysfs interface.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/20250619111806.3546162-2-yi.zhang@huaweicloud.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
