summaryrefslogtreecommitdiff
path: root/Documentation/ABI
AgeCommit message (Collapse)Author
2020-09-28soundwire: sysfs: add slave status and device number before probePierre-Louis Bossart
The MIPI DisCo device properties that are read by the driver from platform firmware, or hard-coded in the driver, should only be provided as sysfs entries when a driver probes successfully. However the device status and device number is updated even when there is no driver present, and hence can be updated when a Slave device is detected on the bus without being described in platform firmware and without any driver registered/probed. As suggested by GregKH, the attribute group for Slave status and device number is is added by default upon device registration. Credits to Vinod Koul for the status_show() function, shared in a separate patch and used as is here. The status table was modified to remove an unnecessary enum and status_show() is handled in a different group attribute than what was suggested by Vinod. Tested-by: Srinivas Kandgatla <srinivas.kandagatla@linaro.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Co-developed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200924194430.121058-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-22habanalabs: replace armcp with the generic cpucpOded Gabbay
ArmCP mandates that the device CPU is always an ARM processor, which might be wrong in the future. Most of this change is an internal renaming of variables, functions and defines but there are two entries in sysfs which have armcp in their names. Add identical cpucp entries but don't remove yet the armcp entries. Those will be deprecated next year. Add the documentation about it in sysfs documentation. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22Merge tag 'iio-for-5.10b-take2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of features and cleanups for IIO in 5.10 We have a couple of changes that apply to large sets of drivers, so I have grouped those to keep this short. There are a few late breaking fixes in here that can wait for the merge window. dt yaml conversions ------------------- * adi,ad7768-1 * adi,ad7949 * aspeed,ast2400 * cosmic,10001-adc * dlg,da9150-gpadc * fsl,imx25-gcq * fsl,imx7d-adc * fsl,vf610 * holt,hi8435 * marvell,berlin2-adc * motorola,cpcap-adc * nuvoton,nau7802 * nuvoton,npcm750-adc * nxp,lpc1850-adc * nxp,lpc3220 * sprd,sc2720-adc * st,stmpe-adc * ti,adc12138 * ti,ads1015 * ti,ads7950 * ti,twl4030-madc Features -------- * adxrs290 - Add triggered buffer support and expose data ready signal as a possible trigger. Includes updating bindings. - Add debugfs hooks for register access. * mlx90632 - Add a clear user interface to override the measured ambient temperature. * vl53l0x - Add IRQ support including dt bindings. Cleanups and minor fixes ------------------------ (groups) Replace mlock with local lock: * adf4350 * exynos-adc * fls-imx25-gcq * stm32-dac devm use to simplify probe error handling and remove functions. * adis16201 * adis16203 * adis16209 * adis16240 * adis16136 * adis16260 * adis16400 * adis16460 * adis16480 * adis library - drop unused adis_setup_buffer_and_trigger() of_match_ptr removal and incorrect ACPI binding removal of_match_ptr() rarely makes sense in an IIO driver as space saving is trivial and it breaks ACPI PRP0001 based instantiation. Mostly this series is about removing examples that get copied into new drivers. * ad2s1200 * ad5272 * ad5446 * ad5592r * ad5593r * ad5703 * ak8974 * ak8975 * ams-iaq-core * as3935 * atlas-sensor * ds1803 * hdc100x * htu21 * icp10100 * lmp91000 * pulsedlight * max30102 * max5432 * max5481 * mcp4018 * mcp4131 * mcp4531 * mcp4725 * ms5611 * ms5637 * si7020 * sgp30 * ti-dac082s085 * ti-dac5571 * tmp007 * tsys01 * vz89x * zpa2326 kernel-doc fixes * iio-core * ad7303 * ad7947 * adis16080 * adis16400 * iio_dummy_evgen * sgp30 Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp() This is a long running effort. There are a few more drivers to come. * inv_mpu6050 * itg3200 * si1145 * st_lsm6dsx * ti-adc0832 * ti-adc12138 (not driver focused) * MAINTAINERS - Consolidate Analog Device IIO entries whilst removing Beniamin Bia. - Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been active for a long time and people are getting intermitted bounces. * Add __printf() markings to a few functions that were missing them. * drop some rotted documentation from staging. * rework buffer sysfs file creation (precursor to multiple buffer support) (individual drivers) * ad5592r - Fix use of true for IIO_SHARED_BY_TYPE - Tidy up locking and indentation. * ad9467 - Improve error message on chip-id missmatch. - Use more appropriate error value if chip-id not recognised. * adis-library - Simplify burst mode handling. * adxrs290 - Make sure to switch device to standby mode during remove. * as73211 - Increase measurement timeout as seems some devices are slower. * bma180 - Fix use of true fo IIO_SHARED_BY_TYPE * exynos_adc - Update binding to require second interrut with touch screen. - Update binding to not require syscon on S5Pv210 * hmc5843 - Fix use of true for IIO_SHARED_BY_TYPE * inv_mpu6050 - Use regmap_noinc_read() for fifo reading. * palmas_gpadc - Use module_platform_driver() to remove boilerplate. * meson-saradc - style consistency fixes * rockchip_saradc - Allow compile testing with !ARM. * st_lsm6dsx - Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision. - Fix an issue with unchecked return value. * stm32-adc - Fix a missing return introduced in dev_err_probe() patch earlier in cycle. * sx9310 - Prefer async mode for probe as paticularly slow startup. * vcnl4000 - Add missing interrupt property to dt binding. * tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings: iio: vishay,vcnl4000: add interrupts property iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads. iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues. iio:adc:ti-adc12138 Fix alignment issue with timestamp iio:adc:ti-adc0832 Fix alignment issue with timestamp iio:imu:st_lsm6dsx Fix alignment and data leak issues iio:light:si1145: Fix timestamp alignment and prevent data leak. iio:gyro:itg3200: Fix timestamp alignment and prevent data leak. iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock dt-bindings:iio:adc:holt,hi8435 yaml conversion dt-bindings:iio:adc:adi,ad7768-1 yaml conversion dt-bindings:iio:adc:adi,ad7949 yaml conversion dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion dt-bindings:iio:adc:ti,ads1015 yaml conversion ...
2020-09-18ACPI: DPTF: Add PCH FIVR participant driverSrinivas Pandruvada
This driver adds support for Dynamic Platform and Thermal Framework (DPTF) PCH (Platform Controller Hub) FIVR (Fully Integrated Voltage Regulator) participant support. This participant is responsible for exposing platform telemetry and control for: freq_mhz_high_clock freq_mhz_low_clock These attributes are used to get and set PCH FIVR switching frequency for thermal and radio frequency interference mitigation. Refer to Documentation/ABI/testing/sysfs-platform-dptf for ABI details. ACPI methods description used in this driver: RFC0: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. The ACPI method takes a DWORD value. GFC0: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. RFC1: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 38.4MHz. The ACPI method takes a DWORD value. GFC1: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 38.4MHz. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-16docs: stable-ABI: Document /sys/kernel/notesStephen Boyd
Document the notes file in sysfs as the running vmlinux's .note section in binary format. Hopefully this helps someone like me realize the kernel exposes the note section in sysfs in the future. Take the date from when the file was introduced. It's been a while so presumably this is stable and not testing material. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200909063752.931283-1-swboyd@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-09-16staging:iio:light: Move tsl2x7x ABI docs to correct location.Jonathan Cameron
These seem to be up to date but never moved out of staging when the driver did. Hence let us move them out now. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Cc: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20200905174721.216452-3-jic23@kernel.org
2020-09-14Merge tag 'fpga-for-5.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: Here is the first set of changes for the 5.10-rc1 merge window. Xilinx: - Luca's changes clean up the xilinx-spi driver and add better diagnostics on errors. Core: - I cleaned up a stray comment. - Richard's change marks FPGA manager tasks un-interruptible. - Tom has agreed to help out as Reviewer in the FPGA Manager subsystem. DFL: - Xu's changes add a new bus that is the first part of a series to support adding devices via DFL (the other parts are still under review) All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: create a dfl bus type to support DFL devices fpga: fpga-region: Cleanup an outdated comment fpga: dfl: map feature mmio resources in their own feature drivers fpga manager: xilinx-spi: provide better diagnostics on programming failure fpga manager: xilinx-spi: add error checking after gpiod_get_value() fpga manager: xilinx-spi: fix write_complete timeout handling fpga manager: xilinx-spi: remove final dot from dev_err() strings fpga manager: xilinx-spi: remove stray comment fpga: dfl: change data type of feature id to u16 MAINTAINERS: Add Tom Rix as fpga reviewer fpga: stratix10-soc: make FPGA task un-interruptible
2020-09-14Merge 5.9-rc5 into staging-nextGreg Kroah-Hartman
We want the staging/iio changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-13iio: temperature: mlx90632: Interface to change object ambient temperatureCrt Mori
Since object temperature might be different than the sensor temperature the infrared sensors should provide an interface to inject ambient temperature. This was in past done via write to ambient temperature interface (in_temp_ambient_raw), but I think most people did not know about it. This solution introduces a new iio type of the CALIBAMBIENT which is hopefully more descriptive and more explicit about the purpose and capabilities of the sensors. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200906210231.383976-1-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-11f2fs: support age threshold based garbage collectionChao Yu
There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11Merge tag 'fsi-for-5.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joel writes: FSI changes for 5.10 - Misc code cleanups. Thanks to Colin, Xu and Rikard - Features for the ASPEED FSI master * Detect connection type and routing for Tacoma * Run at full speed (200MHz) by default * Set bus speed with a parameter * CFAM reset GPIO * 23 bit addressing - Core features * Disable unused links * Set LBUS ownership * tag 'fsi-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: aspeed: Support CFAM reset GPIO fsi: aspeed: Add module param for bus divisor fsi: aspeed: Run the bus at maximum speed fsi: aspeed: Support cabled FSI dt-bindings: fsi: Document gpios fsi: scom: Constify scom_ids fsi: sbefifo: Constify sbefifo_ids fsi: master: Constify hub_master_ids fsi: master: Remove link enable read-back fsi: core: Set slave local bus ownership during init fsi: core: Disable link when slave init fails fsi: master: Add boolean parameter to link_enable function fsi: fsi-occ: fix return value check in occ_probe() fsi: aspeed: Enable 23-bit addressing fsi: master-ast-cf: fix spelling mistake "firwmare" -> "firmware"
2020-09-11Merge tag 'v5.9-rc4' into nextVinod Koul
Linux 5.9-rc4
2020-09-09fpga: dfl: create a dfl bus type to support DFL devicesXu Yilun
A new bus type "dfl" is introduced for private features which are not initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these private features could be handled by separate driver modules. DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on enumeration. DFL drivers could be registered on this bus to match these DFL devices. They are matched by dfl type & feature_id. [mdf@kernel.org: Add missing Documentation part to MAINTAINERS file] Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2020-09-10fsi: aspeed: Support CFAM reset GPIOJoel Stanley
Systems have a line for restting the remote CFAM. This is not part of the FSI master, but is associated with it, so it makes sense to include it in the master driver. This exposes a sysfs interface to reset the cfam, abstracting away the direction and polarity of the GPIO, as well as the timing of the reset pulse. Userspace will be blocked until the reset pulse is finished. The reset is hard coded to be in the range of (900, 1000) us. It was observed with a scope to regularly be just over 1ms. If the device tree property is not preset the driver will silently continue. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200728025527.174503-6-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-03iio: accel: adxl372: Add additional trigger ABI docsAlexandru Tachici
Document use of additional trigger supplied by driver. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200810093257.65929-3-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03docs: abi: iio: Use What: consistentlyGwendal Grignou
Change "[w|W]hat[:| ]" to What: for consistency. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20200828233156.2264689-2-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: documentation: light: Add as73211 sysfs documentationChristian Eggers
The driver for the as73211 light sensor provides the following not yet documented sysfs entries: - in_intensity_(x|y|z)_raw - in_intensity_(x|y|z)_scale - in_intensity_sampling_frequency(_available) - in_intensity_hardwaregain(_available) - in_intensity_integration_time Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03Documentation: ABI: iio: fix some spelling mistakesAhmad Fatoum
This fixes some typos found while browsing the documentation. Cc: trivial@kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: humidity: Add TI HDC20x0 supportEugene Zaikonnikov
Add driver support for HDC2010/2080 series devices and sysfs documentation for their heater element. HDC2010 is an integrated high-accuracy humidity and temperature sensor with very low power consumption. The device includes a resistive heating element. The temperature range is -40C to 125C with 0.2C accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy. Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03dmaengine: idxd: add command status to idxd sysfs attributeDave Jiang
Export admin command status to sysfs attribute in order to allow user to retrieve configuration error. Allows user tooling to retrieve the command error and provide more user friendly error messages. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/159865278770.29455.8026892329182750127.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03dmaengine: idxd: add support for configurable max wq batch sizeDave Jiang
Add sysfs attribute max_batch_size to wq in order to allow the max batch size configured on a per wq basis. Add support code to configure the valid user input on wq enable. This is a performance tuning parameter. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/159865273617.29141.4383066301730821749.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03dmaengine: idxd: add support for configurable max wq xfer sizeDave Jiang
Add sysfs attribute max_xfer_size to wq in order to allow the max xfer size configured on a per wq basis. Add support code to configure the valid user input on wq enable. This is a performance tuning parameter. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/159865265404.29141.3049399618578194052.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-31Merge tag 'v5.9-rc3' into rdma.git for-nextJason Gunthorpe
Required due to dependencies in following patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-31Merge 5.9-rc3 into char-misc-nextGreg Kroah-Hartman
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-26power: supply: add wireless typeSubbaraman Narayanamurthy
Currently, power_supply framework supports only Battery, UPS, Mains and USB power_supply_type. Add wireless power_supply_type so that the drivers which supports wireless can register a power supply class device with POWER_SUPPLY_TYPE_WIRELESS. Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-08-22iio: add IIO_MOD_O2 modifierMatt Ranostay
Add modifier IIO_MOD_O2 for O2 concentration reporting Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-08-21powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driverKajol Jain
Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") added cpumask file as part of hv-24x7 driver inside the interface folder. The cpumask file is supposed to be in the top folder of the PMU driver in order to make hotplug work. This patch fixes that issue and creates new group 'cpumask_attr_group' to add cpumask file and make sure it added in top folder. command:# cat /sys/devices/hv_24x7/cpumask 0 Fixes: 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
2020-08-18RDMA/cm: Remove unused cm_classJason Gunthorpe
Previous commits removed all references to the /sys/class/infiniband_cm/ directory represented by the cm_class symbol. Remove the directory and cm_class. Fixes: a1a8e4a85cf7 ("rdma: Delete the ib_ucm module") Link: https://lore.kernel.org/r/0-v1-90096a98c476+205-remove_cm_leftovers_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18mei: add vtag support bit in client propertiesAlexander Usyskin
Vtag support is on a client basis, meaning not every client supports it. The vtag capability is communicated via the client properties structure during client enumeration process. Export the propertiy via sysfs. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200818115147.2567012-4-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-11Merge tag 'libnvdimm-for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updayes from Vishal Verma: "You'd normally receive this pull request from Dan Williams, but he's busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm this cycle. This adds a new feature in libnvdimm - 'Runtime Firmware Activation', and a few small cleanups and fixes in libnvdimm and DAX. I'd originally intended to make separate topic-based pull requests - one for libnvdimm, and one for DAX, but some of the DAX material fell out since it wasn't quite ready. Summary: - add 'Runtime Firmware Activation' support for NVDIMMs that advertise the relevant capability - misc libnvdimm and DAX cleanups" * tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr libnvdimm/security: the 'security' attr never show 'overwrite' state libnvdimm/security: fix a typo ACPI: NFIT: Fix ARS zero-sized allocation dax: Fix incorrect argument passed to xas_set_err() ACPI: NFIT: Add runtime firmware activate support PM, libnvdimm: Add runtime firmware activation support libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO() drivers/dax: Expand lock scope to cover the use of addresses fs/dax: Remove unused size parameter dax: print error message by pr_info() in __generic_fsdax_supported() driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW} tools/testing/nvdimm: Emulate firmware activation commands tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation tools/testing/nvdimm: Add command debug messages tools/testing/nvdimm: Cleanup dimm index passing ACPI: NFIT: Define runtime firmware activation commands ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor libnvdimm: Validate command family indices
2020-08-10Merge tag 'f2fs-for-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've added two small interfaces: (a) GC_URGENT_LOW mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC mode allows Android to run some lower priority GCs in background, while new ioctl discards user information without race condition when the account is removed. In addition, some patches were merged to address latency-related issues. We've fixed some compression-related bug fixes as well as edge race conditions. Enhancements: - add GC_URGENT_LOW mode in gc_urgent - introduce F2FS_IOC_SEC_TRIM_FILE ioctl - bypass racy readahead to improve read latencies - shrink node_write lock coverage to avoid long latency Bug fixes: - fix missing compression flag control, i_size, and mount option - fix deadlock between quota writes and checkpoint - remove inode eviction path in synchronous path to avoid deadlock - fix to wait GCed compressed page writeback - fix a kernel panic in f2fs_is_compressed_page - check page dirty status before writeback - wait page writeback before update in node page write flow - fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry We've added some minor sanity checks and refactored trivial code blocks for better readability and debugging information" * tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: prepare a waiter before entering io_schedule f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive f2fs: replace test_and_set/clear_bit() with set/clear_bit() f2fs: make file immutable even if releasing zero compression block f2fs: compress: disable compression mount option if compression is off f2fs: compress: add sanity check during compressed cluster read f2fs: use macro instead of f2fs verity version f2fs: fix deadlock between quota writes and checkpoint f2fs: correct comment of f2fs_exist_written_data f2fs: compress: delay temp page allocation f2fs: compress: fix to update isize when overwriting compressed file f2fs: space related cleanup f2fs: fix use-after-free issue f2fs: Change the type of f2fs_flush_inline_data() to void f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl f2fs: should avoid inode eviction in synchronous path f2fs: segment.h: delete a duplicated word f2fs: compress: fix to avoid memory leak on cc->cpages f2fs: use generic names for generic ioctls f2fs: don't keep meta inode pages used for compressed block migration ...
2020-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
2020-08-07Merge tag 'for-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification - convert simple-battery DT binding to YAML - add long-life charging mode Battery/charger drivers: - bq25150: new charger driver - bq27xxx: add support for BQ27z561 and BQ28z610 - max17040: support CAPACITY_ALERT_MIN - sbs-battery: add PEC support - wilco-ec: support long-life charging mode - bq25890: fix DT binding - misc. fixes and cleanups Reset drivers: - linkstation: new reset driver" * tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: wilco_ec: Add long life charging mode power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor dt-bindings: power: Add BQ28z610 compatible power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor dt-bindings: power: Add BQ27Z561 compatible power: supply: test_power: Fix battery_current initial value power: supply: Fix kerneldoc of power_supply_temp2resist_simple() power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated() dt-bindings: power: Convert battery.txt to battery.yaml power: supply: rt5033_battery: Fix error code in rt5033_battery_probe() power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN power: supply: check if calc_soc succeeded in pm860x_init_battery power: supply: bq2xxxx: Replace HTTP links with HTTPS ones power: reset: add driver for LinkStation power off power: supply: sc27xx: prevent adc * 1000 from overflow math64: New DIV_S64_ROUND_CLOSEST helper power: fix duplicated words in bq2415x_charger.h power: Convert to DEFINE_SHOW_ATTRIBUTE power: reset: keystone-reset: Replace HTTP links with HTTPS ones power: supply: bq25150 introduce the bq25150 ...
2020-08-07Merge tag 'dmaengine-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Support out of order dma completion - Support for repeating transaction New controllers: - Support for Actions S700 DMA engine - Renesas R8A774E1, r8a7742 controller binding - New driver for Xilinx DPDMA controller Other: - Support of out of order dma completion in idxd driver - W=1 warning cleanup of subsystem - Updates to ti-k3-dma, dw, idxd drivers" * tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits) dmaengine: dw: Don't include unneeded header to platform data header dmaengine: Actions: Add support for S700 DMA engine dmaengine: Actions: get rid of bit fields from dma descriptor dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml dmaengine: idxd: add missing invalid flags field to completion dmaengine: dw: Initialize max_sg_burst capability dmaengine: dw: Introduce max burst length hw config dmaengine: dw: Initialize min and max burst DMA device capability dmaengine: dw: Set DMA device max segment size parameter dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config dmaengine: Introduce DMA-device device_caps callback dmaengine: Introduce max SG burst capability dmaengine: Introduce min burst length capability dt-bindings: dma: dw: Add max burst transaction length property dt-bindings: dma: dw: Convert DW DMAC to DT binding dmaengine: ti: k3-udma: Query throughput level information from hardware dmaengine: ti: k3-udma: Use defines for capabilities register parsing dmaengine: xilinx: dpdma: Fix kerneldoc warning dmaengine: xilinx: dpdma: add missing kernel doc dmaengine: xilinx: dpdma: remove comparison of unsigned expression ...
2020-08-07Merge tag 'powerpc-5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for (optionally) using queued spinlocks & rwlocks. - Support for a new faster system call ABI using the scv instruction on Power9 or later. - Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on Power10 and future processors, leaving us with no way to implement the functionality it requests. This risks breaking userspace, though we believe it is unused in practice. - A bug fix for, and then the removal of, our custom stack expansion checking. We now allow stack expansion up to the rlimit, like other architectures. - Remove the remnants of our (previously disabled) topology update code, which tried to react to NUMA layout changes on virtualised systems, but was prone to crashes and other problems. - Add PMU support for Power10 CPUs. - A change to our signal trampoline so that we don't unbalance the link stack (branch return predictor) in the signal delivery path. - Lots of other cleanups, refactorings, smaller features and so on as usual. Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong, YueHaibing. * tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits) selftests/powerpc: Fix pkey syscall redefinitions powerpc: Fix circular dependency between percpu.h and mmu.h powerpc/powernv/sriov: Fix use of uninitialised variable selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs powerpc/40x: Fix assembler warning about r0 powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric powerpc/papr_scm: Fetch nvdimm performance stats from PHYP cpuidle: pseries: Fixup exit latency for CEDE(0) cpuidle: pseries: Add function to parse extended CEDE records cpuidle: pseries: Set the latency-hint before entering CEDE selftests/powerpc: Fix online CPU selection powerpc/perf: Consolidate perf_callchain_user_[64|32]() powerpc/pseries/hotplug-cpu: Remove double free in error path powerpc/pseries/mobility: Add pr_debug() for device tree changes powerpc/pseries/mobility: Set pr_fmt() powerpc/cacheinfo: Warn if cache object chain becomes unordered powerpc/cacheinfo: Improve diagnostics about malformed cache lists powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages powerpc/cacheinfo: Set pr_fmt() powerpc: fix function annotations to avoid section mismatch warnings with gcc-10 ...
2020-08-06Input: exc3000 - add support to query model and fw_versionSebastian Reichel
Expose model and fw_version via sysfs. Also query the model in probe to make sure, that the I2C communication with the device works before successfully probing the driver. This is a bit complicated, since EETI devices do not have a sync interface. Sending the commands and directly reading does not work. Sending the command and waiting for some time is also not an option, since there might be touch events in the mean time. Last but not least we do not cache the results, since this interface can be used to check the I2C communication is still working as expected. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
2020-08-06Merge tag 'staging-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the large set of Staging and IIO driver patches for 5.9-rc1. Lots of churn here, but overall the size increase in lines added is small, while adding a load of new IIO drivers. Major things in here: - lots and lots of IIO new drivers and frameworks added - IIO driver fixes and updates - lots of tiny coding style cleanups for staging drivers - vc04_services major reworks and cleanups We had 3 set of drivers move out of staging in this round as well: - wilc1000 wireless driver moved out of staging - speakup moved out of staging - most USB driver moved out of staging Full details are in the shortlog. All of these have been in linux-next with no reported issues. The last few changes here were to resolve reported linux-next issues, and they seem to have resolved the problems" * tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits) staging: most: fix up movement of USB driver staging: rts5208: clear alignment style issues staging: r8188eu: replace rtw_netdev_priv define with inline function staging: netlogic: clear alignment style issues staging: android: ashmem: Fix lockdep warning for write operation drivers: most: add USB adapter driver staging: most: Use %pM format specifier for MAC addresses staging: ks7010: Use %pM format specifier for MAC addresses staging: qlge: qlge_dbg: removed comment repition staging: wfx: Use flex_array_size() helper in memcpy() staging: rtl8723bs: Align macro definitions staging: rtl8723bs: Clean up function declations staging: rtl8723bs: Fix coding style errors drivers: staging: audio: Fix the missing header file for helper file staging: greybus: audio: Enable GB codec, audio module compilation. staging: greybus: audio: Add helper APIs for dynamic audio modules staging: greybus: audio: Resolve compilation error in topology parser staging: greybus: audio: Resolve compilation errors for GB codec module staging: greybus: audio: Maintain jack list within GB Audio module staging: greybus: audio: Update snd_jack FW usage as per new APIs ...
2020-08-05Merge tag 'leds-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests" * tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits) MAINTAINERS: Remove myself as LED subsystem maintainer leds: disallow /sys/class/leds/*:multi:* for now leds: add RGB color option, as that is different from multicolor. Make LEDS_LP55XX_COMMON depend on I2C to fix build errors: Documentation: ABI: leds-turris-omnia: document sysfs attribute leds: initial support for Turris Omnia LEDs dt-bindings: leds: add cznic,turris-omnia-leds binding leds: pattern trigger -- check pattern for validity leds: Replace HTTP links with HTTPS ones leds: trigger: add support for LED-private device triggers leds: lp5521: Add multicolor framework multicolor brightness support leds: lp5523: Update the lp5523 code to add multicolor brightness function leds: lp55xx: Add multicolor framework support to lp55xx leds: lp55xx: Convert LED class registration to devm_* dt-bindings: leds: Convert leds-lp55xx to yaml leds: multicolor: Introduce a multicolor class definition leds: Add multicolor ID to the color ID list dt: bindings: Add multicolor class dt bindings documention leds: lp5523: Fix various formatting issues in the code leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros ...
2020-08-05Merge tag 'usb-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt patches for 5.9-rc1. Nothing really magic/major in here, just lots of little changes and updates: - clean up language usages in USB core and some drivers - Thunderbolt driver updates and additions - USB Gadget driver updates - dwc3 driver updates (like always...) - build with "W=1" warning fixups - mtu3 driver updates - usb-serial driver updates and device ids - typec additions and updates for new hardware - xhci debug code updates for future platforms - cdns3 driver updates - lots of other minor driver updates and fixes and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits) usb: common: usb-conn-gpio: Register charger usb: mtu3: simplify mtu3_req_complete() usb: mtu3: clear dual mode of u3port when disable device usb: mtu3: use MTU3_EP_WEDGE flag usb: mtu3: remove useless member @busy in mtu3_ep struct usb: mtu3: remove repeated error log usb: mtu3: add ->udc_set_speed() usb: mtu3: introduce a funtion to check maximum speed usb: mtu3: clear interrupts status when disable interrupts usb: mtu3: reinitialize CSR registers usb: mtu3: fix macro for maximum number of packets usb: mtu3: remove unnecessary pointer checks usb: xhci: Fix ASMedia ASM1142 DMA addressing usb: xhci: define IDs for various ASMedia host controllers usb: musb: convert to devm_platform_ioremap_resource_byname usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname usb: dwc3: convert to devm_platform_ioremap_resource_byname usb: cdns3: convert to devm_platform_ioremap_resource_byname usb: phy: am335x: convert to devm_platform_ioremap_resource_byname ...
2020-08-05Merge tag 'driver-core-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of changes to the driver core, and some drivers using the changes, for 5.9-rc1. "Biggest" thing in here is the device link exposure in sysfs, to help to tame the madness that is SoC device tree representations and driver interactions with it. Other stuff in here that is interesting is: - device probe log helper so that drivers can report problems in a unified way easier. - devres functions added - DEVICE_ATTR_ADMIN_* macro added to make it harder to write incorrect sysfs file permissions - documentation cleanups - ability for debugfs to be present in the kernel, yet not exposed to userspace. Needed for systems that want it enabled, but do not trust users, so they can still use some kernel functions that were otherwise disabled. - other minor fixes and cleanups The patches outside of drivers/base/ all have acks from the respective subsystem maintainers to go through this tree instead of theirs. All of these have been in linux-next with no reported issues" * tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) drm/bridge: lvds-codec: simplify error handling drm/bridge/sii8620: fix resource acquisition error handling driver core: add deferring probe reason to devices_deferred property driver core: add device probe log helper driver core: Avoid binding drivers to dead devices Revert "test_firmware: Test platform fw loading on non-EFI systems" firmware_loader: EFI firmware loader must handle pre-allocated buffer selftest/firmware: Add selftest timeout in settings test_firmware: Test platform fw loading on non-EFI systems driver core: Change delimiter in devlink device's name to "--" debugfs: Add access restriction option tracefs: Remove unnecessary debug_fs checks. driver core: Fix probe_count imbalance in really_probe() kobject: remove unused KOBJ_MAX action driver core: Fix sleeping in invalid context during device link deletion driver core: Add waiting_for_supplier sysfs file for devices driver core: Add state_synced sysfs file for devices that support it driver core: Expose device link details in sysfs driver core: Drop mention of obsolete bus rwsem from kernel-doc debugfs: file: Remove unnecessary cast in kfree() ...
2020-08-05Merge tag 'char-misc-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...
2020-08-05Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: - NVMe: - ZNS support (Aravind, Keith, Matias, Niklas) - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David, Dongli, Max, Sagi) - null_blk zone capacity support (Aravind) - MD: - raid5/6 fixes (ChangSyun) - Warning fixes (Damien) - raid5 stripe fixes (Guoqing, Song, Yufen) - sysfs deadlock fix (Junxiao) - raid10 deadlock fix (Vitaly) - struct_size conversions (Gustavo) - Set of bcache updates/fixes (Coly) * tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits) md/raid5: Allow degraded raid6 to do rmw md/raid5: Fix Force reconstruct-write io stuck in degraded raid5 raid5: don't duplicate code for different paths in handle_stripe raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show md: print errno in super_written md/raid5: remove the redundant setting of STRIPE_HANDLE md: register new md sysfs file 'uuid' read-only md: fix max sectors calculation for super 1.0 nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() ...
2020-08-04Merge tag 'docs-5.9' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "It's been a busy cycle for documentation - hopefully the busiest for a while to come. Changes include: - Some new Chinese translations - Progress on the battle against double words words and non-HTTPS URLs - Some block-mq documentation - More RST conversions from Mauro. At this point, that task is essentially complete, so we shouldn't see this kind of churn again for a while. Unless we decide to switch to asciidoc or something...:) - Lots of typo fixes, warning fixes, and more" * tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits) scripts/kernel-doc: optionally treat warnings as errors docs: ia64: correct typo mailmap: add entry for <alobakin@marvell.com> doc/zh_CN: add cpu-load Chinese version Documentation/admin-guide: tainted-kernels: fix spelling mistake MAINTAINERS: adjust kprobes.rst entry to new location devices.txt: document rfkill allocation PCI: correct flag name docs: filesystems: vfs: correct flag name docs: filesystems: vfs: correct sync_mode flag names docs: path-lookup: markup fixes for emphasis docs: path-lookup: more markup fixes docs: path-lookup: fix HTML entity mojibake CREDITS: Replace HTTP links with HTTPS ones docs: process: Add an example for creating a fixes tag doc/zh_CN: add Chinese translation prefer section doc/zh_CN: add clearing-warn-once Chinese version doc/zh_CN: add admin-guide index doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label futex: MAINTAINERS: Re-add selftests directory ...
2020-08-04Merge tag 'printk-for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Herbert Xu made printk header file self-contained. - Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup() error handling. - Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf code. - Minor documentation updates. * tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: lib/vsprintf: Force type of flags value for gfp_t lib/vsprintf: Replace custom spec to print decimals with generic one lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert() printk: Make linux/printk.h self-contained doc:kmsg: explicitly state the return value in case of SEEK_CUR Replace HTTP links with HTTPS ones: vsprintf hvc: unify console setup naming console: Fix trivia typo 'change' -> 'chance' console: Propagate error code from console ->setup() tty: hvc: Return proper error code from console ->setup() hook serial: sunzilog: Return proper error code from console ->setup() hook serial: sunsab: Return proper error code from console ->setup() hook mips: Return proper error code from console ->setup() hook
2020-08-03Merge tag 'pm-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most significant change here is the extension of the Energy Model to cover non-CPU devices (as well as CPUs) from Lukasz Luba. There is also some new hardware support (Ice Lake server idle states table for intel_idle, Sapphire Rapids and Power Limit 4 support in the RAPL driver), some new functionality in the existing drivers (eg. a new switch to disable/enable CPU energy-efficiency optimizations in intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci, devfreq), including the elimination of W=1 build warnings from cpufreq done by Lee Jones. Specifics: - Make the Energy Model cover non-CPU devices (Lukasz Luba). - Add Ice Lake server idle states table to the intel_idle driver and eliminate a redundant static variable from it (Chen Yu, Rafael Wysocki). - Eliminate all W=1 build warnings from cpufreq (Lee Jones). - Add support for Sapphire Rapids and for Power Limit 4 to the Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui). - Fix function name in kerneldoc comments in the idle_inject power capping driver (Yangtao Li). - Fix locking issues with cpufreq governors and drop a redundant "weak" function definition from cpufreq (Viresh Kumar). - Rearrange cpufreq to register non-modular governors at the core_initcall level and allow the default cpufreq governor to be specified in the kernel command line (Quentin Perret). - Extend, fix and clean up the intel_pstate driver (Srinivas Pandruvada, Rafael Wysocki): * Add a new sysfs attribute for disabling/enabling CPU energy-efficiency optimizations in the processor. * Make the driver avoid enabling HWP if EPP is not supported. * Allow the driver to handle numeric EPP values in the sysfs interface and fix the setting of EPP via sysfs in the active mode. * Eliminate a static checker warning and clean up a kerneldoc comment. - Clean up some variable declarations in the powernv cpufreq driver (Wei Yongjun). - Fix up the ->enter_s2idle callback definition to cover the case when it points to the same function as ->idle correctly (Neal Liu). - Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson). - Make the PM core emit "changed" uevent when adding/removing the "wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi). - Add a helper macro for declaring PM callbacks and use it in the MMC jz4740 driver (Paul Cercueil). - Fix white space in some places in the hibernate code and make the system-wide PM code use "const char *" where appropriate (Xiang Chen, Alexey Dobriyan). - Add one more "unsafe" helper macro to the freezer to cover the NFS use case (He Zhe). - Change the language in the generic PM domains framework to use parent/child terminology and clean up a typo and some comment fromatting in that code (Kees Cook, Geert Uytterhoeven). - Update the operating performance points OPP framework (Lukasz Luba, Andrew-sh.Cheng, Valdis Kletnieks): * Refactor dev_pm_opp_of_register_em() and update related drivers. * Add a missing function export. * Allow disabled OPPs in dev_pm_opp_get_freq(). - Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier): * Add support for delayed timers to the devfreq core and make the Samsung exynos5422-dmc driver use it. * Unify sysfs interface to use "df-" as a prefix in instance names consistently. * Fix devfreq_summary debugfs node indentation. * Add the rockchip,pmu phandle to the rk3399_dmc driver DT bindings. * List Dmitry Osipenko as the Tegra devfreq driver maintainer. * Fix typos in the core devfreq code. - Update the pm-graph utility to version 5.7 including a number of fixes related to suspend-to-idle (Todd Brandt). - Fix coccicheck errors and warnings in the cpupower utility (Shuah Khan). - Replace HTTP links with HTTPs ones in multiple places (Alexander A. Klimov)" * tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) cpuidle: ACPI: fix 'return' with no value build warning cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode cpufreq: intel_pstate: Rearrange the storing of new EPP values intel_idle: Customize IceLake server support PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent cpuidle: change enter_s2idle() prototype cpuidle: psci: Prevent domain idlestates until consumers are ready cpuidle: psci: Convert PM domain to platform driver cpuidle: psci: Fix error path via converting to a platform driver cpuidle: psci: Fail cpuidle registration if set OSI mode failed ...
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-08-03Merge tag 'platform-drivers-x86-v5.9-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - ASUS WMI driver honors BAT1 name of the battery (quite a few new laptops are using it) - Dell WMI driver supports new key codes and backlight events - ThinkPad ACPI driver now may use standard charge threshold interface, it also has been updated to provide Laptop or Desktop mode to the user - Intel Speed Select Technology gained support on Sapphire Rapids platform - Regular update of Speed Select Technology tools - Mellanox has been updated to support complex attributes - PMC core driver has been fixed to show correct names for LPM0 register - HTTP links were replaced by HTTPS ones where it applies - Miscellaneous fixes and cleanups here and there * tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits) platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures platform/x86: thinkpad_acpi: Make some symbols static platform/x86: thinkpad_acpi: add documentation for battery charge control platform/x86: thinkpad_acpi: use standard charge control attribute names platform/x86: thinkpad_acpi: remove unused defines platform/x86: ISST: drop a duplicated word in isst_if.h tools/power/x86/intel-speed-select: Update version for v5.9 tools/power/x86/intel-speed-select: Add retries for mail box commands tools/power/x86/intel-speed-select: Add option to delay mbox commands tools/power/x86/intel-speed-select: Ignore -o option processing on error tools/power/x86/intel-speed-select: Change path for caching topology info platform/x86: acerhdf: Replace HTTP links with HTTPS ones platform/x86: apple-gmux: Replace HTTP links with HTTPS ones platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED platform/x86: mlx-platform: Extend FAN platform data description platform_data/mlxreg: Add presence register field for FAN devices Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/mellanox: mlxreg-io: Add support for complex attributes platform/x86: mlx-platform: Add more definitions for system attributes platform_data/mlxreg: Add support for complex attributes ...
2020-07-31powerpc/papr_scm: Fetch nvdimm performance stats from PHYPVaibhav Jain
Update papr_scm.c to query dimm performance statistics from PHYP via H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR specific NVDIMM attribute 'perf_stats' in sysfs. The patch also provide a sysfs ABI documentation for the stats being reported and their meanings. During NVDIMM probe time in papr_scm_nvdimm_init() a special variant of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of performance statistics is supported or not. If successful then a PHYP returns a maximum possible buffer length needed to read all performance stats. This returned value is stored in a per-nvdimm attribute 'stat_buffer_len'. The layout of request buffer for reading NVDIMM performance stats from PHYP is defined in 'struct papr_scm_perf_stats' and 'struct papr_scm_perf_stat'. These structs are used in newly introduced drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall. The sysfs access function perf_stats_show() uses value 'stat_buffer_len' to allocate a buffer large enough to hold all possible NVDIMM performance stats and passes it to drc_pmem_query_stats() to populate. Finally statistics reported in the buffer are formatted into the sysfs access function output buffer. Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200731064153.182203-2-vaibhav@linux.ibm.com
2020-07-31power: supply: wilco_ec: Add long life charging modeCrag Wang
This is a long life mode set in the factory for extended warranty battery, the power charging rate is customized so that battery at work last longer. Presently switching to a different battery charging mode is through EC PID 0x0710 to configure the battery firmware, this operation will be blocked by EC with failure code 0x01 when PLL mode is already in use. Signed-off-by: Crag Wang <crag.wang@dell.com> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 21:06:20 +0000