| Age | Commit message (Collapse) | Author |
|---|
|
Use cfg.remote_ifname for arguments of remote command.
Without this UDP tests fail in NIPA where local interface
is called enp1s0 and remote enp0s4.
Fixes: 1d0dc857b5d8 ("selftests: drv-net: add checksum tests")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250830183842.688935-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- vhci: Prevent use-after-free by removing debugfs files early
- L2CAP: Fix use-after-free in l2cap_sock_cleanup_listen()
* tag 'for-net-2025-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen()
Bluetooth: vhci: Prevent use-after-free by removing debugfs files early
====================
Link: https://patch.msgid.link/20250829191210.1982163-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 0cc22f5a861c ("phy: qcom: qmp-pcie: Add PHY register retention
support") added support for using the "no_csr" reset to skip configuration
of the PHY if the init sequence was already applied by the boot firmware.
The expectation is that the PHY is only turned on/off by using the "no_csr"
reset, instead of powering it down and re-programming it after a full
reset.
The boot firmware on X1E does not fully conform to this expectation: If the
PCIe3 link fails to come up (e.g. because no PCIe card is inserted), the
firmware powers down the PHY using the QPHY_PCS_POWER_DOWN_CONTROL
register. The QPHY_START_CTRL register is kept as-is, so the driver assumes
the PHY is already initialized and skips the configuration/power up
sequence. The PHY won't come up again without clearing the
QPHY_PCS_POWER_DOWN_CONTROL, so eventually initialization fails:
qcom-qmp-pcie-phy 1be0000.phy: phy initialization timed-out
phy phy-1be0000.phy.0: phy poweron failed --> -110
qcom-pcie 1bd0000.pcie: cannot initialize host
qcom-pcie 1bd0000.pcie: probe with driver qcom-pcie failed with error -110
This can be reliably reproduced on the X1E CRD, QCP and Devkit when no card
is inserted for PCIe3.
Fix this by checking the QPHY_PCS_POWER_DOWN_CONTROL register in addition
to QPHY_START_CTRL. If the PHY is powered down with the register, it
doesn't conform to the expectations for using the "no_csr" reset, so we
fully re-initialize with the normal reset sequence.
Also check the register more carefully to ensure all of the bits we expect
are actually set. A simple !!(readl()) is not enough, because the PHY might
be only partially set up with some of the expected bits set.
Cc: stable@vger.kernel.org
Fixes: 0cc22f5a861c ("phy: qcom: qmp-pcie: Add PHY register retention support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-phy-qcom-qmp-pcie-nocsr-fix-v3-1-4898db0cc07c@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some SoCs are just validated with the TX delay enabled. With commit
ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed
RGMII TX delay"), the network driver will patch the delay setting on the
fly assuming that the TX delay setting is fixed. In reality, the TX
delay is configurable and just skipped in the documentation. There are
bootloaders, which will disable the TX delay and this will lead to a
transmit path which doesn't add any delays at all.
Fix that by always writing the RGMII_ID setting and report an error for
unsupported RGMII delay modes.
This is safe to do and shouldn't break any boards in mainline because
the fixed delay is only introduced for gmii-sel compatibles which are
used together with the am65-cpsw-nuss driver and also contains the
commit above.
Fixes: ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed RGMII TX delay")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20250819065622.1019537-1-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ina238_write_power() was attempting to clamp the user input but was
throwing away the result. Ensure that we clamp the value to the
appropriate range before it is converted into a register value.
Fixes: 0d9f596b1fe34 ("hwmon: (ina238) Modify the calculation formula to adapt to different chips")
Cc: Wenliang Yan <wenliang202407@163.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When clamping a register value, the result needs to be masked against the
register size. This was missing, resulting in errors when trying to write
negative limits. Fix by masking the clamping result against the register
size.
Fixes: eacb52f010a80 ("hwmon: Driver for Texas Instruments INA238")
Cc: Nathan Rossi <nathan.rossi@digi.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 51b2bb3f2568 ("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250821082639.1301453-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixes: 0b5e92c5e020 ("ASoC WM8940 Driver")
Reported-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Link: https://patch.msgid.link/20250821082639.1301453-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 294833fc9eb4 ("ASoC: wm8940: Rewrite code to set proper clocks")
Reported-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Link: https://patch.msgid.link/20250821082639.1301453-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
driver support indirect read and indirect write operation with
assumption no force device removal(unbind) operation. However
force device removal(removal) is still available to root superuser.
Unbinding driver during operation causes kernel crash. This changes
ensure driver able to handle such operation for indirect read and
indirect write by implementing refcount to track attached devices
to the controller and gracefully wait and until attached devices
remove operation completed before proceed with removal operation.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Niravkumar L Rabara <nirav.rabara@altera.com>
Link: https://patch.msgid.link/8704fd6bd2ff4d37bba4a0eacf5eba3ba001079e.1756168074.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
S32G doesn't have the max prescale erratum (default) and it can query
the max number of CS from hardware, so add those settings.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-9-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add query_hw_for_num_cs in devtype to avoid directly checking compatible
string "fsl,imx93-spi".
No functionality change.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-8-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This erratum only ever results in a max value of 1, otherwise the full 3
bits are available. To avoid repeating the same default prescale value
for every new device's devdata, treat 0 as no limit (7) and only set a
value when the erratum is present.
Change the field to be 3 bits to catch out of range definitions.
No functionality change.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-7-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add const for all devtype_data.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-6-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible strings 'nxp,s32g2-lpspi' and 'nxp,s32g3-lpspi' for S32G2
and S32G3. Require nxp,s32g3-lpspi to fallback to nxp,s32g2-lpspi since
they are currently compatible.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-5-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clear the error flags after disabling the module to avoid the case when
a flag is set again between flag clear and module disable. And use
SR_CLEAR_MASK to replace hardcoded value for improved readability.
Although fsl_lpspi_reset() was only introduced in commit a15dc3d657fa
("spi: lpspi: Fix CLK pin becomes low before one transfer"), the
original driver only reset SR in the interrupt handler, making it
vulnerable to the same issue. Therefore the fixes commit is set at the
introduction of the driver.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-4-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DMA mode fsl_lpspi_reset() is always called at the end, even when the
transfer is aborted. In PIO mode aborts skip the reset leaving the FIFO
filled and the module enabled.
Fix it by always calling fsl_lpspi_reset().
Fixes: a15dc3d657fa ("spi: lpspi: Fix CLK pin becomes low before one transfer")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-3-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver currently supports multiple chip-selects, but only sets the
polarity for the first one (CS 0). Fix it by setting the PCSPOL bit for
the desired chip-select.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-2-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use
CONT") breaks transmissions when CONT is used. The TDIE interrupt should
not be disabled in all cases. If CONT is used and the TX transfer is not
yet completed yet, but the interrupt handler is called because there are
characters to be received, TDIE is replaced with FCIE. When the transfer
is finally completed, SR_TDF is set but the interrupt handler isn't
called again.
Fixes: 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use CONT")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-1-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices might not use the DMIC function of the RT712VB.
Therefore, this patch avoids skipping the blind write with RT712VB.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250901085757.1287945-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 05f254a6369ac020fc0382a7cbd3ef64ad997c92 ("ALSA: usb-audio:
Improve filtering of sample rates on Focusrite devices") changed the
check for max_rate in a way which was overly restrictive, forcing
devices to use very high samplerates if they support them, despite
support existing for lower rates as well.
This maintains the intended outcome (ensuring samplerates selected are
supported) while allowing devices with higher maximum samplerates to be
opened at all supported samplerates.
This patch was tested with a Clarett+ 8Pre USB
Fixes: 05f254a6369a ("ALSA: usb-audio: Improve filtering of sample rates on Focusrite devices")
Signed-off-by: Tina Wuest <tina@wuest.me>
Link: https://patch.msgid.link/20250901092024.140993-1-tina@wuest.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse into vfs.fixes
fuse fixes for 6.17-rc5
* tag 'fuse-fixes-6.17-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (6 commits)
fuse: Block access to folio overlimit
fuse: fix fuseblk i_blkbits for iomap partial writes
fuse: reflect cached blocksize if blocksize was changed
fuse: prevent overflow in copy_file_range return value
fuse: check if copy_file_range() returns larger than requested size
fuse: do not allow mapping a non-regular backing file
Link: https://lore.kernel.org/CAJfpeguEVMMyw_zCb+hbOuSxdE2Z3Raw=SJsq=Y56Ae6dn2W3g@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The RADXA ROCK 5T board uses the same GPIO pin for controlling the USB
host port regulator. This control pin was mistakenly left out of the
ROCK 5T device tree.
Reported-by: FUKAUMI Naoki <naoki@radxa.com>
Closes: https://libera.catirclogs.org/linux-rockchip/2025-08-25#38609886;
Fixes: 0ea651de9b79 ("arm64: dts: rockchip: add ROCK 5T device tree")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250825-rock5t-usb-fix-v1-1-de71954a1bb5@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()
to ensure that no new recovery work items can be queued after device
removal has started. Previously, recovery work could be scheduled even
after canceling existing work, potentially leading to use-after-free
bugs if recovery accessed freed resources.
Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better
reflect its new behavior.
Fixes: 58cde80f45a2 ("accel/ivpu: Use dedicated work for job timeout detection")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250808110939.328366-1-jacek.lawrynowicz@linux.intel.com
|
|
Patches for the arm64 defconfig are supposed to be sent to the
SoC maintainers (e.g. a change in the generic arm64 defconfig
required for Rockchip devices should be send to Heiko Stübner
as he is listed as maintainer for "ARM/Rockchip SoC support")
and not the ARM64 PORT maintainers.
While we cannot easily describe this in MAINTAINERS, we can at
least stop it from giving false information and make it behave
the same way as for the MAINTAINERS file itself (which basically
has the same rules), so that it just outputs the LKML for the
ARM64 defconfig.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250818-arm64-defconfig-v1-1-f589553c3d72@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Axiado AX3000 EVK has total of 4 UART ports. Add missing alias for uart0,
uart1, uart2.
This fixes the probe failures on the remaining UARTs.
Fixes: 1f7055779001 ("arm64: dts: axiado: Add initial support for AX3000 SoC and eval board")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
set_track_prepare() can incur lock recursion.
The issue is that it is called from hrtimer_start_range_ns
holding the per_cpu(hrtimer_bases)[n].lock, but when enabled
CONFIG_DEBUG_OBJECTS_TIMERS, may wake up kswapd in set_track_prepare,
and try to hold the per_cpu(hrtimer_bases)[n].lock.
Avoid deadlock caused by implicitly waking up kswapd by passing in
allocation flags, which do not contain __GFP_KSWAPD_RECLAIM in the
debug_objects_fill_pool() case. Inside stack depot they are processed by
gfp_nested_mask().
Since ___slab_alloc() has preemption disabled, we mask out
__GFP_DIRECT_RECLAIM from the flags there.
The oops looks something like:
BUG: spinlock recursion on CPU#3, swapper/3/0
lock: 0xffffff8a4bf29c80, .magic: dead4ead, .owner: swapper/3/0, .owner_cpu: 3
Hardware name: Qualcomm Technologies, Inc. Popsicle based on SM8850 (DT)
Call trace:
spin_bug+0x0
_raw_spin_lock_irqsave+0x80
hrtimer_try_to_cancel+0x94
task_contending+0x10c
enqueue_dl_entity+0x2a4
dl_server_start+0x74
enqueue_task_fair+0x568
enqueue_task+0xac
do_activate_task+0x14c
ttwu_do_activate+0xcc
try_to_wake_up+0x6c8
default_wake_function+0x20
autoremove_wake_function+0x1c
__wake_up+0xac
wakeup_kswapd+0x19c
wake_all_kswapds+0x78
__alloc_pages_slowpath+0x1ac
__alloc_pages_noprof+0x298
stack_depot_save_flags+0x6b0
stack_depot_save+0x14
set_track_prepare+0x5c
___slab_alloc+0xccc
__kmalloc_cache_noprof+0x470
__set_page_owner+0x2bc
post_alloc_hook[jt]+0x1b8
prep_new_page+0x28
get_page_from_freelist+0x1edc
__alloc_pages_noprof+0x13c
alloc_slab_page+0x244
allocate_slab+0x7c
___slab_alloc+0x8e8
kmem_cache_alloc_noprof+0x450
debug_objects_fill_pool+0x22c
debug_object_activate+0x40
enqueue_hrtimer[jt]+0xdc
hrtimer_start_range_ns+0x5f8
...
Signed-off-by: yangshiguang <yangshiguang@xiaomi.com>
Fixes: 5cf909c553e9 ("mm/slub: use stackdepot to save stack trace in objects")
Cc: stable@vger.kernel.org
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
If built on architectures with CONFIG_ARCH_DMA_ADDR_T_64BIT=y nova-core
produces that following build failures:
error[E0308]: mismatched types
--> drivers/gpu/nova-core/fb.rs:49:59
|
49 | hal::fb_hal(chipset).write_sysmem_flush_page(bar, page.dma_handle())?;
| ----------------------- ^^^^^^^^^^^^^^^^^ expected `u64`, found `u32`
| |
| arguments to this method are incorrect
|
note: method defined here
--> drivers/gpu/nova-core/fb/hal.rs:19:8
|
19 | fn write_sysmem_flush_page(&self, bar: &Bar0, addr: u64) -> Result;
| ^^^^^^^^^^^^^^^^^^^^^^^
help: you can convert a `u32` to a `u64`
|
49 | hal::fb_hal(chipset).write_sysmem_flush_page(bar, page.dma_handle().into())?;
| +++++++
error[E0308]: mismatched types
--> drivers/gpu/nova-core/fb.rs:65:47
|
65 | if hal.read_sysmem_flush_page(bar) == self.page.dma_handle() {
| ------------------------------- ^^^^^^^^^^^^^^^^^^^^^^ expected `u64`, found `u32`
| |
| expected because this is `u64`
|
help: you can convert a `u32` to a `u64`
|
65 | if hal.read_sysmem_flush_page(bar) == self.page.dma_handle().into() {
| +++++++
error: this arithmetic operation will overflow
--> drivers/gpu/nova-core/falcon.rs:469:23
|
469 | .set_base((dma_start >> 40) as u16)
| ^^^^^^^^^^^^^^^^^ attempt to shift right by `40_i32`, which would overflow
|
= note: `#[deny(arithmetic_overflow)]` on by default
This is due to the code making assumptions on the width of dma_addr_t to
be 64 bit.
While this could technically be handled, it is rather painful to deal
with, as the following example illustrates:
pub(super) fn read_sysmem_flush_page_ga100(bar: &Bar0) -> DmaAddress {
let addr = u64::from(regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR::read(bar).adr_39_08())
<< FLUSH_SYSMEM_ADDR_SHIFT
| u64::from(regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI::read(bar).adr_63_40())
<< FLUSH_SYSMEM_ADDR_SHIFT_HI;
addr.try_into().unwrap_or_else(|_| {
kernel::warn_on!(true);
0
})
}
At the same time there's not much value for nova-core to support 32-bit,
given that the supported GPU architectures are Turing and later, hence
depend on CONFIG_64BIT.
Cc: John Hubbard <jhubbard@nvidia.com>
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/lkml/20250828160247.37492-1-ojeda@kernel.org/
Fixes: 6554ad65b589 ("gpu: nova-core: register sysmem flush page")
Fixes: 69f5cd67ce41 ("gpu: nova-core: add falcon register definitions and base code")
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20250828223954.351348-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Same issue as G1619-04 in commit 805c74eac8cb ("gpiolib: acpi: Ignore
touchpad wakeup on GPD G1619-04"), Strix Point lineup uses 05.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mika Westerberg <westeri@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.17:
- Correct FlexCAN PHY settings on imx95-19x19-evk board (Haibo Chen)
- Add missing microSD slot supplies for DH electronics i.MX8M Plus
boards (Marek Vasut)
- Fix assigned clocks for JPEG encoder node on i.MX95 (Marek Vasut)
- A couple of regulator setting fixes for imx8mp-tqma8mpql
board (Markus Niebel)
* tag 'imx-fixes-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx95: Fix JPEG encoder node assigned clock
arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator
arm64: dts: imx8mp-tqma8mpql: fix LDO5 power off
Link: https://lore.kernel.org/r/aK6BuzIYwUBRU1GW@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The company's email address has been changed, so update my email
address in MAINTAINERS and .mailmap files.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
OP-TEE driver fix for v6.17
Fixing a typo in a function name.
* tag 'optee-typo-fix-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: ffa: fix a typo of "optee_ffa_api_is_compatible"
Link: https://lore.kernel.org/r/20250819122917.GB3486750@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
TEE fixes for v6.17
- Fixing a memory leak in the error path for tee_dyn_shm_alloc_helper()
- Fixing a NULL pointer dereference in tee_shm_put()
* tag 'tee-fixes-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: fix memory leak in tee_dyn_shm_alloc_helper
tee: fix NULL pointer dereference in tee_shm_put
Link: https://lore.kernel.org/r/20250819122641.GA3486750@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.17-rc1
The recently extended sanity checks for the Qualcomm firmware files
turned out to be too restrictive, preventing a variety of firmware
images from being loaded. Adjust the checks to allow section header
sizes of 0 when sections aren't used.
* tag 'qcom-drivers-fixes-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: mdt_loader: Deal with zero e_shentsize
Link: https://lore.kernel.org/r/20250811145613.120917-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
x->id.spi == 0 means "no SPI assigned", but since commit
94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create states
and add them to the byspi list with this value.
__xfrm_state_delete doesn't remove those states from the byspi list,
since they shouldn't be there, and this shows up as a UAF the next
time we go through the byspi list.
Reported-by: syzbot+a25ee9d20d31e483ba7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a25ee9d20d31e483ba7b
Fixes: 94f39804d891 ("xfrm: Duplicate SPI Handling")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If the client sends SMB2_CREATE_POSIX_CONTEXT to ksmbd, allow the filename
to contain a colon (':'). This requires disabling the support for Alternate
Data Streams (ADS), which are denoted by a colon-separated suffix to the
filename on Windows. This should not be an issue, since this concept is not
known to POSIX anyway and the client has to explicitly request a POSIX
context to get this behavior.
Link: https://lore.kernel.org/all/f9401718e2be2ab22058b45a6817db912784ef61.camel@rx2.rx-server.de/
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reading /proc/fs/cifs/open_dirs may hit a NULL dereference when
tcon->cfids is NULL.
Add NULL check before accessing cfids to prevent the crash.
Reproduction:
- Mount CIFS share
- cat /proc/fs/cifs/open_dirs
Fixes: 844e5c0eb176 ("smb3 client: add way to show directory leases for improved debugging")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
Starting with Rust 1.91.0 (expected 2025-10-30), the target spec format
has changed the type of the `target-pointer-width` key from string
to integer [1].
Thus conditionally use one or the other depending on the version.
Cc: Waffle Maybe <waffle.lapkin@gmail.com>
Link: https://github.com/rust-lang/rust/pull/144443 [1]
Link: https://lore.kernel.org/r/20250829195525.721664-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
As part of the stabilization of Location::file_with_nul(), it was brought
up that the with_nul() suffix usually means something else in Rust APIs,
so the API is being renamed prior to stabilization [1].
Thus, use the new name on new rustc versions.
Link: https://www.github.com/rust-lang/rust/pull/145928 [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250827-file_as_c_str-v1-1-d3f5a3916a9c@google.com
[ Kept `cfg` separation. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Convert the SSB mitigation to the attack vector controls which got
forgotten at the time
- Prevent the CPUID topology hierarchy detection on AMD from
overwriting the correct initial APIC ID
- Fix the case of a machine shipping without microcode in the BIOS, in
the AMD microcode loader
- Correct the Pentium 4 model range which has a constant TSC
* tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add attack vector controls for SSB
x86/cpu/topology: Use initial APIC ID from XTOPOLOGY leaf on AMD/HYGON
x86/microcode/AMD: Handle the case of no BIOS microcode
x86/cpu/intel: Fix the constant_tsc model check for Pentium 4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a stall on the CPU offline path due to mis-counting a deadline
server task twice as part of the runqueue's running tasks count
- Fix a realtime tasks starvation case where failure to enqueue a timer
whose expiration time is already in the past would cause repeated
attempts to re-enqueue a deadline server task which leads to starving
the former, realtime one
- Prevent a delayed deadline server task stop from breaking the
per-runqueue bandwidth tracking
- Have a function checking whether the deadline server task has
stopped, return the correct value
* tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Don't count nr_running for dl_server proxy tasks
sched/deadline: Fix RT task potential starvation when expiry time passed
sched/deadline: Always stop dl-server before changing parameters
sched/deadline: Fix dl_server_stopped()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Remove unnecessary and noisy WARN_ONs in gic-v5's init path
- Avoid a kmemleak false positive for the gic-v5's L2 IST table entries
- Fix a retval check in mvebu-gicp's probe function
- Fix a wrong conversion to guards in atmel-aic[5] irqchip
* tag 'irq_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v5: Remove undue WARN_ON()s in the IRS affinity parsing
irqchip/gic-v5: Fix kmemleak L2 IST table entries false positives
irqchip/mvebu-gicp: Fix an IS_ERR() vs NULL check in probe()
irqchip/atmel-aic[5]: Fix incorrect lock guard conversion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- ARM: stacktrace: include asm/sections.h in asm/stacktrace.h (Arnd
Bergmann)
- ubsan: Fix incorrect hand-side used in handle (Junhui Pei)
- hardening: Require clang 20.1.0 for __counted_by (Nathan Chancellor)
* tag 'hardening-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Require clang 20.1.0 for __counted_by
ARM: stacktrace: include asm/sections.h in asm/stacktrace.h
ubsan: Fix incorrect hand-side used in handle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an off-by-one bug in interrupt handling in gpio-timberdale
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change Altera-PIO driver maintainer
gpio: timberdale: fix off-by-one in IRQ type boundary check
|
|
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b0267 ("batman-adv: network coding - receive coded packets and decode them")
Cc: stable@vger.kernel.org
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
To avoid a memory leak via mm_alloc() + mmdrop() the futex cleanup code
has been moved to __mmdrop(). This resulted in a warnings if the futex
hash table has been allocated via vmalloc() the mmdrop() was invoked
from atomic context.
The free path must stay in __mmput() to ensure it is invoked from
preemptible context.
In order to avoid the memory leak, delay the allocation of
mm_struct::mm->futex_ref to futex_hash_allocate(). This works because
neither the per-CPU counter nor the private hash has been allocated and
therefore
- futex_private_hash() callers (such as exit_pi_state_list()) don't
acquire reference if there is no private hash yet. There is also no
reference put.
- Regular callers (futex_hash()) fallback to global hash. No reference
counting here.
The futex_ref member can be allocated in futex_hash_allocate() before
the private hash itself is allocated. This happens either while the
first thread is created or on request. In both cases the process has
just a single thread so there can be either futex operation in progress
or the request to create a private hash.
Move futex_hash_free() back to __mmput();
Move the allocation of mm_struct::futex_ref to futex_hash_allocate().
[ bp: Fold a follow-up fix to prevent a use-after-free:
https://lore.kernel.org/r/20250830213806.sEKuuGSm@linutronix.de ]
Fixes: e703b7e247503 ("futex: Move futex cleanup to __mmdrop()")
Closes: https://lore.kernel.org/all/20250821102721.6deae493@kernel.org/
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lkml.kernel.org/r/20250822141238.PfnkTjFb@linutronix.de
|
|
Reinstate the rotational media flag for the CD-ROM driver. The flag has
been cleared since commit bd4a633b6f7c ("block: move the nonrot flag to
queue_limits") and this breaks some applications.
Move queue limit configuration from get_sectorsize() to
sr_revalidate_disk() and set the rotational flag.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: bd4a633b6f7c ("block: move the nonrot flag to queue_limits")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250827113550.2614535-1-ming.lei@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same.
Fixes: 472e146d1cf3 ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall")
Cc: stable@vger.kernel.org
Signed-off-by: John Evans <evans1210144@gmail.com>
Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
