| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.17, part two
Tesla FSD and Google GS101 DTS are handled via Samsung SoC tree, so the
clean dtbs_check rule applies there as well - mention this in their
maintainer entries.
Also, include Tesla FSD DTS patterns in Samsung SoC tree to document how
the patches actually travel.
* tag 'samsung-dt64-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: samsung: MAINTAINERS: Add Tesla FSD DTS to Exynos entry
arm64: tesla/google: MAINTAINERS: Reference "SoC clean" maintainer profile
Link: https://lore.kernel.org/r/20250723090455.25295-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung SoC drivers for v6.17
1. Google GS101: Minor improvement PMU binding.
2. ExynosAutov920: Add HSI2 system registers binding.
* tag 'samsung-drivers-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-sysreg: add hsi2 for ExynosAutov920
dt-bindings: soc: samsung: exynos-pmu: Constrain google,pmu-intr-gen-syscon
Link: https://lore.kernel.org/r/20250723090455.25295-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/newsoc
ARM Devicetrees for v6.17
Sophgo:
Add support for Duo Module 01 Evaluation Board.
This board uses SG2000(old codename CV181xH),
which is dual-arch, RISC-V and ARM64. This
patch add the support for ARM64.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'arm-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux:
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
Link: https://lore.kernel.org/r/MAUPR01MB11072C4B088AAC02268044E95FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V Devicetrees for v6.17
Sophgo:
For CV18xx serials:
There are three major changes. The first is to add the
RTCSYS MFD node, which provides rich control registers
for soc power management and other rich control functions;
the second is to add the reset controller node and add
related reset properties for other peripherals; the third
is to add ethernet controller related nodes to the soc
and enable ethernet device control for HuashanPi.
For SG2042:
There are three major changes. The first is to add ISA
extensions such as xtheadvector/ziccrse/zfh for cpu cores;
the second is add ethernet controller support; the third
is add two new boards EVB_V1 & EVB_V2 which use SG2042
SoC.
For SG2044:
There are many changes. The first is to add pmu
configuration; the second is to add ISA extensions
ziccrse and add missing riscv,cbop-block-size property
for cpu cores; the third is to add more peripherals
nodes for SoC after clock controller is ready, such as
MSI/PCIe/pwm/SPI-NOR etc. This PR also add HWMON MCU
device for the sophgo-srd3-10 board and reserve uart0
node for sophgo-srd3-10 board because uart0 is already
occupied by the firmware.
This PR also moves sophgo.yaml from the riscv directory
to soc/sophgo for sharing between riscv and arm. CV18xx
SoC contains a RISC-V big core and an ARM64 big core.
Moving sophgo.yaml to a shared location will help us
add support for ARM cores to the CV18xx chip in the future.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux: (32 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
Link: https://lore.kernel.org/r/MAUPR01MB1107297124C9DA0CD77DA3DC1FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing
page") added a warning to pte_free_defer(), on our request. It was meant
to warn if this would ever be reached for KVM guest mappings, because
the page table would be freed w/o a gmap_unlink(). THP mappings are not
allowed for KVM guests on s390, so this should never happen.
However, it is possible that the warning is triggered in a valid case as
false-positive.
s390_enable_sie() takes the mmap_lock, marks all VMAs as VM_NOHUGEPAGE and
splits possibly existing THP guest mappings. mm->context.has_pgste is set
to 1 before that, to prevent races with the mm_has_pgste() check in
MADV_HUGEPAGE.
khugepaged drops the mmap_lock for file mappings and might run in parallel,
before a vma is marked VM_NOHUGEPAGE, but after mm->context.has_pgste was
set to 1. If it finds file mappings to collapse, it will eventually call
pte_free_defer(). This will trigger the warning, but it is a valid case
because gmap is not yet set up, and the THP mappings will be split again.
Therefore, remove the warning and the comment.
Fixes: 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing page")
Cc: <stable@vger.kernel.org> # 6.6+
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ufs fix from Al Viro:
"Fix regression in ufs options parsing"
* tag 'pull-ufs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the regression in ufs options parsing
|
|
A really dumb braino on rebasing and a dumber fuckup with managing #for-next
Fixes: b70cb459890b ("ufs: convert ufs to the new mount API")
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add TAS2770 support in TI's HDA driver. And add hda_chip_id for
more products. Distinguish DSP and non-DSP in firmware
loading function.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250723142423.38768-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a compatible for the SM7225-based Fairphone 4 which can use this
machine driver.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250723-fp4-usb-audio-offload-v3-3-6be84ed4fc39@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the bindings for the sound card on Fairphone 4 which uses the
older non-audioreach audio architecture.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250723-fp4-usb-audio-offload-v3-2-6be84ed4fc39@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the subnode for Q6USB, used for USB audio offloading.
Cc: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250723-fp4-usb-audio-offload-v3-1-6be84ed4fc39@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dma_fence_wait_timeout returns a long type but the driver is
only using the lower 32 bits of the retval and discarding the
upper 32 bits.
This is particularly problematic if there are already signalled
or stub fences on some of the hw planes. In this case the
dma_fence_wait_timeout function will immediately return with
timeout value MAX_SCHEDULE_TIMEOUT (0x7fffffffffffffff) since
the fence is already signalled. If the driver only uses the lower
32 bits of this return value then it'll interpret it as an error
code (0xFFFFFFFF or (-1)) and skip the wait on the remaining fences.
This issue was first observed in the xe driver with the Android
compositor where the GPU composited layer was not properly waited
on when there were stub fences in other overlay planes resulting in
visual artifacts.
Fixes: d59cf7bb73f3c ("drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence")
Signed-off-by: Aakash Deep Sarkar <aakash.deep.sarkar@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250708074540.1948068-1-aakash.deep.sarkar@intel.com
(cherry picked from commit cdb16039515a5ac4d2c923f7a651cf19a803a3fe)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Now that we have established .mmap_prepare() as the preferred means by
which filesystems establish state upon memory mapping of a file, update the
VFS and porting documentation to reflect this.
As part of this change, additionally update the VFS documentation to
contain the current state of the file_operations struct.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/20250723123036.35472-1-lorenzo.stoakes@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit c245868524cc ("netfs: Remove the old writeback code") removed
the implementation but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/20250723122329.923223-1-yuehaibing@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Sphinx complains that ep_get_upwards_depth_proc() has a kerneldoc-style
comment without documenting its parameters.
This is an internal function that was not meant to show up in kernel
documentation, so fix the warning by changing the comment to a
non-kerneldoc one.
Fixes: 22bacca48a17 ("epoll: prevent creating circular epoll structures")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250717173655.10ecdce6@canb.auug.org.au
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507171958.aMcW08Cn-lkp@intel.com/
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250721-epoll-sphinx-fix-v1-1-b695c92bf009@google.com
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The blk_get_meta_cap() implementation directly assigns bi->csum_type to
the UAPI field lbmd_guard_tag_type. This is not right as the kernel enum
blk_integrity_checksum values are not guaranteed to match the UAPI
defined values.
Fix this by explicitly mapping internal checksum types to UAPI-defined
constants to ensure compatibility and correctness, especially for the
devices using CRC64 PI.
Fixes: 9eb22f7fedfc ("fs: add ioctl to query metadata and protection info capabilities")
Reported-by: Vincent Fu <vincent.fu@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250722120755.87501-1-anuj20.g@samsung.com
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Due to the expectations of the SPINAND code, the driver duplicates
the bad block markers during raw OOB reads.
It has been implemented by using two if statements, and due to the
opposite conditions one of conditional codepaths always runs. Since
the effect of both codepaths is the same, remove the if statements
and use a single line solution instead.
Also add a note about why the duplication is required.
No functional changes intended.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250711-qpic-snand-simplify-bbm-copy-v1-1-dd2608325f72@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
NAND devices with different page sizes requires different number
of ECC steps, yet the qcom_spi_ecc_init_ctx_pipelined() function
sets 4 steps in 'ecc_cfg' unconditionally.
The correct number of the steps is calculated earlier in the
function already, so use that instead of the hardcoded value.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250723-qpic-snand-fix-steps-v1-1-d800695dde4c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to drop the references to the accdet OF node and platform
device taken by of_parse_phandle() and of_find_device_by_node() after
looking up the sound component during probe.
Fixes: cf536e2622e2 ("ASoC: mediatek: common: Handle mediatek,accdet property")
Cc: stable@vger.kernel.org # 6.15
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20250722092542.32754-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
syzbot reported a bug in in afs_put_vlserverlist.
kAFS: bad VL server IP address
BUG: unable to handle page fault for address: fffffffffffffffa
...
Oops: Oops: 0002 [#1] SMP KASAN PTI
...
RIP: 0010:refcount_dec_and_test include/linux/refcount.h:450 [inline]
RIP: 0010:afs_put_vlserverlist+0x3a/0x220 fs/afs/vl_list.c:67
...
Call Trace:
<TASK>
afs_alloc_cell fs/afs/cell.c:218 [inline]
afs_lookup_cell+0x12a5/0x1680 fs/afs/cell.c:264
afs_cell_init+0x17a/0x380 fs/afs/cell.c:386
afs_proc_rootcell_write+0x21f/0x290 fs/afs/proc.c:247
proc_simple_write+0x114/0x1b0 fs/proc/generic.c:825
pde_write fs/proc/inode.c:330 [inline]
proc_reg_write+0x23d/0x330 fs/proc/inode.c:342
vfs_write+0x25c/0x1180 fs/read_write.c:682
ksys_write+0x12a/0x240 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Because afs_parse_text_addrs() parses incorrectly, its return value -EINVAL
is assigned to vllist, which results in -EINVAL being used as the vllist
address when afs_put_vlserverlist() is executed.
Set the vllist value to NULL when a parsing error occurs to avoid this
issue.
Fixes: e2c2cb8ef07a ("afs: Simplify cell record handling")
Reported-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5c042fbab0b292c98fc6
Tested-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/4119365.1753108011@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a missing check for reaching the end of the string while attempting
to split a command.
Fixes: f94f70d39cc2 ("afs: Provide a way to configure address priorities")
Reported-by: syzbot+7741f872f3c53385a2e2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7741f872f3c53385a2e2
Signed-off-by: Leo Stone <leocstone@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/4119428.1753108152@warthog.procyon.org.uk
Acked-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Mark Rutland noticed that the task parameter is ignored and
'current' is being used instead. Since this is usually
what its passed, it hasn't yet been causing problems but likely
will as the code gets more testing.
But, once this is fixed, it creates a new bug in copy_thread_gcs()
since the gcs_el_mode isn't yet set for the task before its being
checked. Move gcs_alloc_thread_stack() after the new task's
gcs_el0_mode initialization to avoid this.
Fixes: fc84bc5378a8 ("arm64/gcs: Context switch GCS state for EL0")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250719043740.4548-2-jeremy.linton@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add RPMh Power Domains support for the Glymur platform.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250716152758.4079467-3-pankaj.patil@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the compatibles for the rpmpd power domains on glymur
boards
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250716152758.4079467-2-pankaj.patil@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Remove the title string ("====") from under arm64 & riscv and move them
to a commment under the perf_user_access sysctl. They are explanations,
*not* sysctls themselves
This effectively removes these two strings from appearing as not
implemented when the check-sysctl-docs script is run
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Remove the combination of spaces and tabs in favor of just tabs.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Removing them solves an issue where they were incorrectly considered as
not implemented by the check-sysctl-docs script
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Adjust the sysctl table detection to include the macro pattern used for
the ucount ctl_tables. This prevents falsly assigning them as
non-documented ctl_tables
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Use a skiplist to "skip" the titles in the guide documentation
(Documentation/admin-guide/sysctl/*) that are not sysctls. This will
give a more accurate account of what sysctl are miss-documented.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Use "#!/usr/bin/env -S gawk -f" instead of "#!/bin/gawk". Needed for
testing in nix environments as they only provide /usr/bin/env at the
standard location.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Renamed sysctl table from kern_table to sysctl_subsys_table and grouped
the two arch specific ctls to the end of the array.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Moved ctl_tables elements for overflowuid and overflowgid into in
kernel/sys.c. Create a register function that keeps them under "kernel"
and run it after core with postcore_initcall.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move both uevent_helper table into lib/kobject_uevent.c. Place the
registration early in the initcall order with postcore_initcall.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Remove unaligned_dump_stack from sysctl.h; it is no longer used or
defined.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Use "#!/usr/bin/env bash" instead of "#!/bin/bash". Needed for testing
in nix environments as they only provide /usr/bin/env at the standard
location.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Remove the following headers from the include list in sysctl.c.
* These are removed as the related variables are no longer there.
=================== ====================
Include Related Var
=================== ====================
linux/kmod.h usermodehelper
asm/nmi.h nmi_watchdoc_enabled
asm/io.h io_delay_type
linux/pid.h pid_max_{,min,max}
linux/sched/sysctl.h sysctl_{sched_*,numa_*,timer_*}
linux/mount.h sysctl_mount_max
linux/reboot.h poweroff_cmd
linux/ratelimit.h {,printk_}ratelimit_state
linux/printk.h kptr_restrict
linux/security.h CONFIG_SECURITY_CAPABILITIES
linux/net.h net_table
linux/key.h key_sysctls
linux/nvs_fs.h acpi_video_flags
linux/acpi.h acpi_video_flags
linux/fs.h proc_nr_files
* These are no longer needed as intermediate includes
==============
Include
==============
linux/filter.h
linux/binfmts.h
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
These comments are older than 2003 and therefore do not bare any
relevance on the current state of the sysctl.c file. Remove them as they
confuse more than clarify.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move cad_pid as well as supporting function proc_do_cad_pid into
kernel/pic.c. Replaced call to __do_proc_dointvec with proc_dointvec
inside proc_do_cad_pid which requires the copy of the ctl_table to
handle the temp value.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move the ctl_table with the "tainted" proc_name into kernel/panic.c.
With it moves the proc_tainted helper function.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move both sysrq ctl_table and supported sysrq_sysctl_handler helper
function into drivers/tty/sysrq.c. Replaced the __do_proc_dointvec in
helper function with do_proc_dointvec_minmax as the former is local to
kernel/sysctl.c. Here we use the minmax version of do_proc_dointvec
because do_proc_dointvec is static and calling do_proc_dointvec_minmax
with a NULL min and max is the same as calling do_proc_dointvec.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
make sysctl_max_threads static as it no longer needs to be exported into
sysctl.c.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move the soft-power ctl table into parisc/power.c. As a consequence the
pwrsw_enabled var is made static.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move the randomize_va_space variable together with all its sysctl table
elements into memory.c. Register it to the "kernel" directory by
adding it to the subsys initialization calls
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move sysctl_panic_on_rcu_stall and sysctl_max_rcu_stall_to_panic into
the kernel/rcu subdirectory. Make these static in tree_stall.h and
removed them as extern from panic.h as their scope is now confined into
one file.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move the max_lock_depth sysctl table element into rtmutex_api.c. Removed
the rtmutex.h include from sysctl.c. Chose to move into rtmutex_api.c
to avoid multiple registrations every time rtmutex.c is included in other
files.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
subsys
Move module sysctl (modprobe_path and modules_disabled) out of sysctl.c
and into the modules subsystem. Make modules_disabled static as it no
longer needs to be exported. Remove module.h from the includes in sysctl
as it no longer uses any module exported variables.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The header files linux/gpio/driver.h is included twice in gpio-cadence.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22931
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250723064608.2178024-1-yang.lee@linux.alibaba.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support for the TI TPS65214 PMIC with the addition of an id_table,
separate TPS65214 template_chip, and device-specific _change_direction
functions.
- Use platform_get_device_id() to assign dev-specific information.
- Use different change_direction() functions since TPS65214's GPIO
configuration bits are changeable during device operation through bit
GPIO_CONFIG in GENERAL_CONFIG register.
- Remove MODULE_ALIAS since it is now generated by MODULE_DEVICE_TABLE.
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250722181609.1541739-3-s-ramamoorthy@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
