| Age | Commit message (Collapse) | Author |
|---|
|
Update error codes in decoding functions of block and scsi layout
drivers to match the core nfsd code. NFS4ERR_EINVAL means that the
server was able to decode the request, but the decoded values are
invalid. Use NFS4ERR_BADXDR instead to indicate a decoding error.
And ENOMEM is changed to nfs code NFS4ERR_DELAY.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This limit has always been a sanity check; in nearly all cases a
large COMPOUND is a sign of a malfunctioning client. The only real
limit on COMPOUND size and complexity is the size of NFSD's send
and receive buffers.
However, there are a few cases where a large COMPOUND is sane. For
example, when a client implementation wants to walk down a long file
pathname in a single round trip.
A small risk is that now a client can construct a COMPOUND request
that can keep a single nfsd thread busy for quite some time.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
To enable NFSD to handle NFSv4 COMPOUNDs of unrestricted size,
resize the array in struct nfsd_genl_rqstp so it saves only up to
16 operations per COMPOUND.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: A function parameter called "rqstp" typically refers to an
object of type "struct svc_rqst", so it's confusing when such an
parameter refers to a different struct type with field names that are
very similar to svc_rqst.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com>
Fixes: c44c5eeb2c02 ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR")
Cc: stable@vger.kernel.org
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/
Fixes: d20c11d86d8f ("nfsd: Protect session creation and client confirm using client_lock")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The valid values for ek_fsidtype are actually 0-7 so it's better to
change the type to u8. Also using kstrtou8() to relpace simple_strtoul(),
kstrtou8() is safer and more suitable for u8.
Suggested-by: NeilBrown <neil@brown.name>
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Convert the svc_wake_up tracepoint into svc_pool_thread_event class.
Have it also record the pool id, and add new tracepoints for when the
thread is already running and for when there are no idle threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
csum_partial_copy_to_xdr is only used inside the sunrpc module, so
remove the export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
csum_partial_copy_to_xdr can handle a checksumming and non-checksumming
case and implements this using a callback, which leads to a lot of
boilerplate code and indirect calls in the fast path.
Switch to storing a need_checksum flag in struct xdr_skb_reader instead
to remove the indirect call and simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The rqst argument to xdr_init_encode_pages is set to NULL by all callers,
and pages is always set to buf->pages. Remove the two arguments and
hardcode the assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When a write delegation is returned, check if read access was added
to nfs4_file when client opens file with WRONLY, and release it.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC8881, section 9.1.2 says:
"In the case of READ, the server may perform the corresponding
check on the access mode, or it may choose to allow READ for
OPEN4_SHARE_ACCESS_WRITE, to accommodate clients whose WRITE
implementation may unavoidably do reads (e.g., due to buffer cache
constraints)."
and in section 10.4.1:
"Similarly, when closing a file opened for OPEN4_SHARE_ACCESS_WRITE/
OPEN4_SHARE_ACCESS_BOTH and if an OPEN_DELEGATE_WRITE delegation
is in effect"
This patch allows READ using write delegation stateid granted on OPENs
with OPEN4_SHARE_ACCESS_WRITE only, to accommodate clients whose WRITE
implementation may unavoidably do (e.g., due to buffer cache
constraints).
For write delegation granted for OPEN with OPEN4_SHARE_ACCESS_WRITE
a new nfsd_file and a struct file are allocated to use for reads.
The nfsd_file is freed when the file is closed by release_all_access.
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Same as sha256 and sha512: Use the state format that the generic partial
block handling code produces, as requested by Herbert, even though this
is applicable only to legacy drivers.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Like I did for crypto/sha512.c, rework crypto/sha1_generic.c (renamed to
crypto/sha1.c) to simply wrap the normal library functions instead of
accessing the low-level block function directly. Also add support for
HMAC-SHA1, again just wrapping the library functions.
Since the replacement crypto_shash algorithms are implemented using the
(potentially arch-optimized) library functions, give them driver names
ending with "-lib" rather than "-generic". Update crypto/testmgr.c and
an odd driver to take this change in driver name into account.
Note: to see the diff from crypto/sha1_generic.c to crypto/sha1.c, view
this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add HMAC support to the SHA-1 library, again following what was done for
SHA-2. Besides providing the basis for a more streamlined "hmac(sha1)"
shash, this will also be useful for multiple in-kernel users such as
net/sctp/auth.c, net/ipv6/seg6_hmac.c, and
security/keys/trusted-keys/trusted_tpm1.c. Those are currently using
crypto_shash, but using the library functions would be much simpler.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a library interface for SHA-1, following the SHA-2 one. As was the
case with SHA-2, this will be useful for various in-kernel users. The
crypto_shash interface will be reimplemented on top of it as well.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
When the GPU scheduler was ported to using a struct for its
initialization parameters, it was overlooked that panfrost creates a
distinct workqueue for timeout handling.
The pointer to this new workqueue is not initialized to the struct,
resulting in NULL being passed to the scheduler, which then uses the
system_wq for timeout handling.
Set the correct workqueue to the init args struct.
Cc: stable@vger.kernel.org # 6.15+
Fixes: 796a9f55a8d1 ("drm/sched: Use struct for drm_sched_init() params")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Closes: https://lore.kernel.org/dri-devel/b5d0921c-7cbf-4d55-aa47-c35cd7861c02@igalia.com/
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250709102957.100849-2-phasta@kernel.org
|
|
Rename the existing sha1_init() to sha1_init_raw(), since it conflicts
with the upcoming library function. This will later be removed, but
this keeps the kernel building for the introduction of the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Rename x86's sha1_update() to sha1_update_x86(), since it conflicts with
the upcoming sha1_update() library function.
Note: the affected code will be superseded by later commits that migrate
the arch-optimized SHA-1 code into the library. This commit simply
keeps the kernel building for the initial introduction of the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
While the HMAC library functions support both incremental and one-shot
computation and both prepared and raw keys, the combination of raw key
+ incremental was missing. It turns out that several potential users of
the HMAC library functions (tpm2-sessions.c, smb2transport.c,
trusted_tpm1.c) want exactly that.
Therefore, add the missing functions hmac_sha*_init_usingrawkey().
Implement them in an optimized way that directly initializes the HMAC
context without a separate key preparation step.
Reimplement the one-shot raw key functions hmac_sha*_usingrawkey() on
top of the new functions, which makes them a bit more efficient.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250711215844.41715-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Fix poly1305-armv4.pl to not do '.globl poly1305_blocks_neon' when
poly1305_blocks_neon() is not defined. Then, remove the empty __weak
definition of poly1305_blocks_neon(), which was still needed only
because of that unnecessary globl statement. (It also used to be needed
because the compiler could generate calls to it when
CONFIG_KERNEL_MODE_NEON=n, but that has been fixed.)
Thanks to Arnd Bergmann for reporting that the globl statement in the
asm file was still depending on the weak symbol.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250711212822.6372-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
With PREEMPT_RT enabled, some of the calls to put_task_struct() coming
from rt_mutex_adjust_prio_chain() could happen in preemptible context and
with a mutex enqueued. That could lead to this sequence:
rt_mutex_adjust_prio_chain()
put_task_struct()
__put_task_struct()
sched_ext_free()
spin_lock_irqsave()
rtlock_lock() ---> TRIGGERS
lockdep_assert(!current->pi_blocked_on);
This is not a SCHED_EXT bug. The first cleanup function called by
__put_task_struct() is sched_ext_free() and it happens to take a
(RT) spin_lock, which in the scenario described above, would trigger
the lockdep assertion of "!current->pi_blocked_on".
Crystal Wood was able to identify the problem as __put_task_struct()
being called during rt_mutex_adjust_prio_chain(), in the context of
a process with a mutex enqueued.
Instead of adding more complex conditions to decide when to directly
call __put_task_struct() and when to defer the call, unconditionally
resort to the deferred call on PREEMPT_RT to simplify the code.
Fixes: 893cdaaa3977 ("sched: avoid false lockdep splat in put_task_struct()")
Suggested-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/aGvTz5VaPFyj0pBV@uudg.org
|
|
Start to flesh out the real find_proxy_task() implementation,
but avoid the migration cases for now, in those cases just
deactivate the donor task and pick again.
To ensure the donor task or other blocked tasks in the chain
aren't migrated away while we're running the proxy, also tweak
the fair class logic to avoid migrating donor or mutex blocked
tasks.
[jstultz: This change was split out from the larger proxy patch]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-9-jstultz@google.com
|
|
Proxy execution forms atomic pairs of tasks: The waiting donor
task (scheduling context) and a proxy (execution context). The
donor task, along with the rest of the blocked chain, follows
the proxy wrt CPU placement.
They can be the same task, in which case push/pull doesn't need any
modification. When they are different, however,
FIFO1 & FIFO42:
,-> RT42
| | blocked-on
| v
blocked_donor | mutex
| | owner
| v
`-- RT1
RT1
RT42
CPU0 CPU1
^ ^
| |
overloaded !overloaded
rq prio = 42 rq prio = 0
RT1 is eligible to be pushed to CPU1, but should that happen it will
"carry" RT42 along. Clearly here neither RT1 nor RT42 must be seen as
push/pullable.
Unfortunately, only the donor task is usually dequeued from the rq,
and the proxy'ed execution context (rq->curr) remains on the rq.
This can cause RT1 to be selected for migration from logic like the
rt pushable_list.
Thus, adda a dequeue/enqueue cycle on the proxy task before __schedule
returns, which allows the sched class logic to avoid adding the now
current task to the pushable_list.
Furthermore, tasks becoming blocked on a mutex don't need an explicit
dequeue/enqueue cycle to be made (push/pull)able: they have to be running
to block on a mutex, thus they will eventually hit put_prev_task().
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-8-jstultz@google.com
|
|
Add a find_proxy_task() function which doesn't do much.
When we select a blocked task to run, we will just deactivate it
and pick again. The exception being if it has become unblocked
after find_proxy_task() was called.
This allows us to validate keeping blocked tasks on the runqueue
and later deactivating them is working ok, stressing the failure
cases for when a proxy isn't found.
Greatly simplified from patch by:
Peter Zijlstra (Intel) <peterz@infradead.org>
Juri Lelli <juri.lelli@redhat.com>
Valentin Schneider <valentin.schneider@arm.com>
Connor O'Brien <connoro@google.com>
[jstultz: Split out from larger proxy patch and simplified
for review and testing.]
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-7-jstultz@google.com
|
|
Without proxy-exec, we normally charge the "current" task for
both its vruntime as well as its sum_exec_runtime.
With proxy, however, we have two "current" contexts: the
scheduler context and the execution context. We want to charge
the execution context rq->curr (ie: proxy/lock holder) execution
time to its sum_exec_runtime (so it's clear to userland the
rq->curr task *is* running), as well as its thread group.
However the rest of the time accounting (such a vruntime and
cgroup accounting), we charge against the scheduler context
(rq->donor) task, because it is from that task that the time
is being "donated".
If the donor and curr tasks are the same, then it's the same as
without proxy.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-6-jstultz@google.com
|
|
Absorb update_curr_task() into update_curr_se(), and
in the process simplify update_curr_common().
This will make the next step a bit easier.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-5-jstultz@google.com
|
|
This lets us assert mutex::wait_lock is held whenever we access
p->blocked_on, as well as warn us for unexpected state changes.
[fix conflicts, call in more places]
[jstultz: tweaked commit subject, reworked a good bit]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-4-jstultz@google.com
|
|
Track the blocked-on relation for mutexes, to allow following this
relation at schedule time.
task
| blocked-on
v
mutex
| owner
v
task
This all will be used for tracking blocked-task/mutex chains
with the prox-execution patch in a similar fashion to how
priority inheritance is done with rt_mutexes.
For serialization, blocked-on is only set by the task itself
(current). And both when setting or clearing (potentially by
others), is done while holding the mutex::wait_lock.
[minor changes while rebasing]
[jstultz: Fix blocked_on tracking in __mutex_lock_common in error paths]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-3-jstultz@google.com
|
|
Add a CONFIG_SCHED_PROXY_EXEC option, along with a boot argument
sched_proxy_exec= that can be used to disable the feature at boot
time if CONFIG_SCHED_PROXY_EXEC was enabled.
Also uses this option to allow the rq->donor to be different from
rq->curr.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-2-jstultz@google.com
|
|
Avoid merge conflicts
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
The standard 'success' output of insn_decoder_test spams build logs with:
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x2e263877)
Prefix the message with the standard ' ' (two spaces) used by kbuild
to denote regular build messages, making it easier for tools to
filter out warnings and errors.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jürgen Groß <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250515132719.31868-6-mingo@kernel.org
|
|
The standard 'success' output of insn_decoder_test spams build logs with:
arch/x86/tools/insn_decoder_test: success: Decoded and checked 8258521 instructions
Prefix the message with the standard ' ' (two spaces) used by kbuild to denote
regular build messages, making it easier for tools to filter out
warnings and errors.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jürgen Groß <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250515132719.31868-5-mingo@kernel.org
|
|
zcrx shouldn't be so frivolous about cutting a dmabuf sgtable and taking
a subrange into it, the dmabuf layer might be not expecting that. It
shouldn't be a problem for now, but since the zcrx dmabuf support is new
and there shouldn't be any real users, let's play safe and reject user
provided ranges into dmabufs. Also, it shouldn't be needed as userspace
should size them appropriately.
Fixes: a5c98e9424573 ("io_uring/zcrx: dmabuf backed zerocopy receive")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/be899f1afed32053eb2e2079d0da241514674aca.1752443579.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We'll have PMUs don't have an interrupt to indicate the counter
overflow, but the Uncore PMU core assume all the PMUs have
interrupt. So handle this case in the core. The existing PMUs
won't be affected.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-7-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The supported event number range of each Uncore PMUs is provided by
each driver in hisi_pmu::check_event and out of range events
will be rejected. A later version with expanded event number range
needs to register the PMU with updated hisi_pmu::check_event
even if it's the only update, which means the expanded events
cannot be used unless the driver's updated. However the unsupported
events won't be counted by the hardware so we can relax the event
number check to allow the use the expanded events.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-6-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
SLLC v3 PMU has the following changes compared to previous version:
a) update the register layout
b) update the definition of SRCID_CTRL and TGTID_CTRL registers.
To be compatible with v2, we use maximum width (11 bits)
and mask the extra length for themselves.
c) remove latency events (driver does not need to be adapted).
SLLC v3 PMU is identified with HID HISI0264.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-5-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Make use of struct acpi_device_id::driver_data for version specific
information rather than judge the version register. This will help
to simplify the probe process and also a bit easier for extension.
Factor out SLLC register definition to struct hisi_sllc_pmu_regs.
No functional changes intended.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
HiSilicon DDRC v3 PMU has the different interrupt register offset
compared to the v2. Add device information of v3 PMU with ACPI
HID HISI0235.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Version 1 and 2 of DDRC PMU also use different HID. Make use of
struct acpi_device_id::driver_data for version specific information
rather than judge the version register. This will help to
simplify the probe process and also a bit easier for extension.
In order to support this extend struct hisi_pmu_dev_info for version
specific counter bits and event range.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Refresh the x86-32 defconfig to pick up changes in the
general Kconfig environment: removed options, different
defaults, renames, etc.
No changes to the actual result of 'make ARCH=i386 defconfig'.
[ bp: Fold in a fix as reported by Andy:
https://lore.kernel.org/r/20250626150118.318836-1-andriy.shevchenko@linux.intel.com ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jürgen Groß <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250515132719.31868-2-mingo@kernel.org
|
|
NI-700 has a distinct PMU interrupt output for each Clock Domain,
however some integrations may still combine these together externally.
The initial driver didn't attempt to support this, in anticipation of a
more general solution for IRQ sharing between system PMU instances, but
that's still a way off, so let's make this intermediate step for now to
at least allow sharing IRQs within an individual NI instance.
Now that CPU affinity and migration are cleaned up, it's fairly
straightforward to adopt similar logic to arm-cmn, to identify CDs with
a common interrupt and loop over them directly in the handler.
Signed-off-by: Shouping Wang <allen.wang@hj-micro.com>
[ rm: Rework for affinity handling, cosmetics, new commit message ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f62db639d3b54c959ec477db7b8ccecbef1ca310.1752256072.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since overflow interrupts from the individual PMUs are infrequent and
unlikely to coincide, and we make no attempt to balance them across
CPUs anyway, there's really not much point tracking a separate CPU
affinity per PMU. Move the CPU affinity and hotplug migration up to
the NI instance level.
Tested-by: Shouping Wang <allen.wang@hj-micro.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/00b622872006c2f0c89485e343b1cb8caaa79c47.1752256072.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The command word members of struct nvme_common_command are __le32 type,
so use helper le32_to_cpu() to read them properly.
Fixes: 9f079dda1433 ("nvme: allow passthru cmd error logging")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When inserting a namespace into the controller's namespace list, the
function uses list_add_rcu() when the namespace is inserted in the middle
of the list, but falls back to a regular list_add() when adding at the
head of the list.
This inconsistency could lead to race conditions during concurrent
access, as users might observe a partially updated list. Fix this by
consistently using list_add_rcu() in both code paths to ensure proper
RCU protection throughout the entire function.
Fixes: be647e2c76b2 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The volatile_reg function is named as tps6287x_volatile_reg by mistake
when enabing the REGCACHE_MAPLE support.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250714010456.4906-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current SPI framework does not verify if the SPI device supports
8 IO mode when doing an 8-bit transfer. This patch adds a check to
ensure that if the transfer tx_nbits or rx_nbits is 8, the SPI mode must
support 8 IO. If not, an error is returned, preventing undefined behavior.
Fixes: d6a711a898672 ("spi: Fix OCTAL mode support")
Cc: stable@vger.kernel.org
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://patch.msgid.link/20250714031023.504752-1-linchengming884@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to bring up secondary CPUs main CPU write trampoline
code to SRAM. The trampoline code is written while secondary
CPUs are powered on (at least that true for RK3188 CPU).
Sometimes that leads to kernel hang. Probably because secondary
CPU execute trampoline code while kernel doesn't expect.
The patch moves SRAM initialization step to the point where all
secondary CPUs are powered down.
That fixes rarely hangs on RK3188:
[ 0.091568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091996] rockchip_smp_prepare_cpus: ncores 4
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Link: https://lore.kernel.org/r/20250703140453.1273027-1-al.kochet@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This reverts commit 465b9ee0ee7bc268d7f261356afd6c4262e48d82.
Such notifications fit better into core or nfnetlink_hook code,
following the NFNL_MSG_HOOK_GET message format.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
