| Age | Commit message (Collapse) | Author |
|---|
|
In a few cases, usually in the initialization code, KVM locks all vCPUs
of a VM to ensure that userspace doesn't do funny things while KVM performs
an operation that affects the whole VM.
Until now, all these operations were implemented using custom code,
and all of them share the same problem:
Lockdep can't cope with simultaneous locking of a large number of locks of
the same class.
However if these locks are taken while another lock is already held,
which is luckily the case, it is possible to take advantage of little known
_nest_lock feature of lockdep which allows in this case to have an
unlimited number of locks of same class to be taken.
To implement this, create two functions:
kvm_lock_all_vcpus() and kvm_trylock_all_vcpus()
Both functions are needed because some code that will be replaced in
the subsequent patches, uses mutex_trylock, instead of regular mutex_lock.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM's SEV intra-host migration code needs to lock all vCPUs
of the source and the target VM, before it proceeds with the migration.
The number of vCPUs that belong to each VM is not bounded by anything
except a self-imposed KVM limit of CONFIG_KVM_MAX_NR_VCPUS vCPUs which is
significantly larger than the depth of lockdep's lock stack.
Luckily, the locks in both of the cases mentioned above, are held under
the 'kvm->lock' of each VM, which means that we can use the little
known lockdep feature called a "nest_lock" to support this use case in
a cleaner way, compared to the way it's currently done.
Implement and expose 'mutex_lock_killable_nest_lock' for this
purpose.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Despite the fact that several lockdep-related checks are skipped when
calling trylock* versions of the locking primitives, for example
mutex_trylock, each time the mutex is acquired, a held_lock is still
placed onto the lockdep stack by __lock_acquire() which is called
regardless of whether the trylock* or regular locking API was used.
This means that if the caller successfully acquires more than
MAX_LOCK_DEPTH locks of the same class, even when using mutex_trylock,
lockdep will still complain that the maximum depth of the held lock stack
has been reached and disable itself.
For example, the following error currently occurs in the ARM version
of KVM, once the code tries to lock all vCPUs of a VM configured with more
than MAX_LOCK_DEPTH vCPUs, a situation that can easily happen on modern
systems, where having more than 48 CPUs is common, and it's also common to
run VMs that have vCPU counts approaching that number:
[ 328.171264] BUG: MAX_LOCK_DEPTH too low!
[ 328.175227] turning off the locking correctness validator.
[ 328.180726] Please attach the output of /proc/lock_stat to the bug report
[ 328.187531] depth: 48 max: 48!
[ 328.190678] 48 locks held by qemu-kvm/11664:
[ 328.194957] #0: ffff800086de5ba0 (&kvm->lock){+.+.}-{3:3}, at: kvm_ioctl_create_device+0x174/0x5b0
[ 328.204048] #1: ffff0800e78800b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.212521] #2: ffff07ffeee51e98 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.220991] #3: ffff0800dc7d80b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.229463] #4: ffff07ffe0c980b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.237934] #5: ffff0800a3883c78 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.246405] #6: ffff07fffbe480b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
Luckily, in all instances that require locking all vCPUs, the
'kvm->lock' is taken a priori, and that fact makes it possible to use
the little known feature of lockdep, called a 'nest_lock', to avoid this
warning and subsequent lockdep self-disablement.
The action of 'nested lock' being provided to lockdep's lock_acquire(),
causes the lockdep to detect that the top of the held lock stack contains
a lock of the same class and then increment its reference counter instead
of pushing a new held_lock item onto that stack.
See __lock_acquire for more information.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
|
|
KVM VMX changes for 6.16:
- Explicitly check MSR load/store list counts to fix a potential overflow on
32-bit kernels.
- Flush shadow VMCSes on emergency reboot.
- Revert mem_enc_ioctl() back to an optional hook, as it's nullified when
SEV or TDX is disabled via Kconfig.
- Macrofy the handling of vt_x86_ops to eliminate a pile of boilerplate code
needed for TDX, and to optimize CONFIG_KVM_INTEL_TDX=n builds.
|
|
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
|
|
KVM x86 posted interrupt changes for 6.16:
Refine and optimize KVM's software processing of the PIR, and ultimately share
PIR harvesting code between KVM and the kernel's Posted MSI handler
|
|
KVM x86 MMU changes for 6.16:
- Refine and harden handling of spurious faults.
- Use kvm_x86_call() instead of open coding static_call().
|
|
KVM x86 misc changes for 6.16:
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU IBPB, between
SVM and VMX.
- Advertise support to userspace for WRMSRNS and PREFETCHI.
- Rescan I/O APIC routes after handling EOI that needed to be intercepted due
to the old/previous routing, but not the new/current routing.
- Add a module param to control and enumerate support for device posted
interrupts.
- Misc cleanups.
|
|
file_start_write() and file_end_write() should be added around ->write_iter().
Recently we switch to ->write_iter() from vfs_iter_write(), and the
implied file_start_write() and file_end_write() are lost.
Also we never add them for dio code path, so add them back for covering
both.
Cc: Jeff Moyer <jmoyer@redhat.com>
Fixes: f2fed441c69b ("loop: stop using vfs_iter_{read,write} for buffered I/O")
Fixes: bc07c10a3603 ("block: loop: support DIO & AIO")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250527153405.837216-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
is_td() and is_td_vcpu() are used in no-instrumentation sections; use
__always_inline instead of inline.
vmlinux.o: error: objtool: vmx_handle_nmi+0x47:
call to is_td_vcpu.isra.0() leaves .noinstr.text section
Fixes: 7172c753c26a ("KVM: VMX: Move common fields of struct vcpu_{vmx,tdx} to a struct")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Message-ID: <tencent_1A767567C83C1137829622362E4A72756F09@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
xa_find() interprets id as the lower bound and thus expects it initialised.
Reported-by: syzbot+c3ff04150c30d3df0f57@syzkaller.appspotmail.com
Fixes: 76f1cc98b23ce ("io_uring/zcrx: add support for multiple ifqs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/faea44ef63131e6968f635e1b6b7ca6056f1f533.1748359655.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
"Updates for the time/timer core code:
- Rework the initialization of the posix-timer kmem_cache and move
the cache pointer into the timer_data structure to prevent false
sharing
- Switch the alarmtimer code to lock guards
- Improve the CPU selection criteria in the per CPU validation of the
clocksource watchdog to avoid arbitrary selections (or omissions)
on systems with a small number of CPUs
- The usual cleanups and improvements"
* tag 'timers-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Remove unused tick_nohz_full_add_cpus_to()
clocksource: Fix the CPUs' choice in the watchdog per CPU verification
alarmtimer: Switch spin_{lock,unlock}_irqsave() to guards
alarmtimer: Remove dead return value in clock2alarm()
time/jiffies: Change register_refined_jiffies() to void __init
timers: Remove unused __round_jiffies(_up)
posix-timers: Initialize cache early and move pointer into __timer_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource/clockevent drivers:
- The final conversion of text formatted device tree binding to
schemas
- A new driver fot the System Timer Module on S32G NXP SoCs
- A new driver fot the Econet HPT timer
- The usual improvements and device tree binding updates"
* tag 'timers-clocksource-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
clocksource/drivers/renesas-ostm: Unconditionally enable reprobe support
dt-bindings: timer: renesas,ostm: Document RZ/V2N (R9A09G056) support
dt-bindings: timer: Convert marvell,armada-370-timer to DT schema
dt-bindings: timer: Convert ti,keystone-timer to DT schema
dt-bindings: timer: Convert st,spear-timer to DT schema
dt-bindings: timer: Convert socionext,milbeaut-timer to DT schema
dt-bindings: timer: Convert snps,arc-timer to DT schema
dt-bindings: timer: Convert snps,archs-rtc to DT schema
dt-bindings: timer: Convert snps,archs-gfrc to DT schema
dt-bindings: timer: Convert lsi,zevio-timer to DT schema
dt-bindings: timer: Convert jcore,pit to DT schema
dt-bindings: timer: Convert img,pistachio-gptimer to DT schema
dt-bindings: timer: Convert ezchip,nps400-timer to DT schema
dt-bindings: timer: Convert cirrus,clps711x-timer to DT schema
dt-bindings: timer: Convert altr,timer-1.0 to DT schema
dt-bindings: timer: Add ESWIN EIC7700 CLINT
clocksource/drivers: Add EcoNet Timer HPT driver
dt-bindings: timer: Add EcoNet EN751221 "HPT" CPU Timer
dt-bindings: timer: Convert arm,mps2-timer to DT schema
dt-bindings: timer: Add Sophgo SG2044 ACLINT timer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
|
|
extension
If client send SMB2_CREATE_POSIX_CONTEXT to ksmbd, Allow a filename
to contain special characters.
Reported-by: Philipp Kerling <pkerling@casix.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The Mac SMB client code seems to expect the on-disk file identifier
to have the semantics of HFS+ Catalog Node Identifier (CNID).
ksmbd provides the inode number as a unique ID to the client,
but in the case of subvolumes of btrfs, there are cases where different
files have the same inode number, so the mac smb client treats it
as an error. There is a report that a similar problem occurs
when the share is ZFS.
Returning UniqueId of zero will make the Mac client to stop using and
trusting the file id returned from the server.
Reported-by: Justin Turner Arthur <justinarthur@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the generic interrupt subsystem core code:
- Address a long standing subtle problem in the CPU hotplug code for
affinity-managed interrupts.
Affinity-managed interrupts are shut down by the core code when the
last CPU in the affinity set goes offline and started up again when
the first CPU in the affinity set becomes online again.
This unfortunately does not take into account whether an interrupt
has been disabled before the last CPU goes offline and starts up
the interrupt unconditionally when the first CPU becomes online
again.
That's obviously not what drivers expect.
Address this by preserving the disabled state for affinity-managed
interrupts accross these CPU hotplug operations. All non-managed
interrupts are not affected by this because startup/shutdown is
coupled to request/free_irq() which obviously has to reset state.
- Support three-cell scheme interrupts to allow GPIO drivers to
specify interrupts from an already existing scheme
- Switch the interrupt subsystem core to lock guards. This gets rid
of quite some copy & pasta boilerplate code all over the place.
- The usual small cleanups and improvements all over the place"
* tag 'irq-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
genirq/irqdesc: Remove double locking in hwirq_show()
genirq: Retain disable depth for managed interrupts across CPU hotplug
genirq: Bump the size of the local variable for sprintf()
genirq/manage: Use the correct lock guard in irq_set_irq_wake()
genirq: Consistently use '%u' format specifier for unsigned int variables
genirq: Ensure flags in lock guard is consistently initialized
genirq: Fix inverted condition in handle_nested_irq()
genirq/cpuhotplug: Fix up lock guards conversion brainf..t
genirq: Use scoped_guard() to shut clang up
genirq: Remove unused remove_percpu_irq()
genirq: Remove irq_[get|put]_desc*()
genirq/manage: Rework irq_set_irqchip_state()
genirq/manage: Rework irq_get_irqchip_state()
genirq/manage: Rework teardown_percpu_nmi()
genirq/manage: Rework prepare_percpu_nmi()
genirq/manage: Rework disable_percpu_irq()
genirq/manage: Rework irq_percpu_is_enabled()
genirq/manage: Rework enable_percpu_irq()
genirq/manage: Rework irq_set_parent()
genirq/manage: Rework can_request_irq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry code updates from Thomas Gleixner:
"Updates for the generic and architecture entry code:
- Move LoongArch and RISC-V ret_from_fork() implementations to C code
so that syscall_exit_user_mode() can be inlined
- Split the RISC-V ret_from_fork() implementation into return to user
and return to kernel, which gives a measurable performance
improvement
- Inline syscall_exit_user_mode() which benefits all architectures by
avoiding a function call and letting the compiler do better
optimizations"
* tag 'core-entry-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
LoongArch: entry: Fix include order
entry: Inline syscall_exit_to_user_mode()
LoongArch: entry: Migrate ret_from_fork() to C
riscv: entry: Split ret_from_fork() into user and kernel
riscv: entry: Convert ret_from_fork() to C
|
|
Expose the virtio-rtc UTC-like clock as an RTC clock to userspace - if it
is present, and if it does not step on leap seconds. The RTC class enables
the virtio-rtc device to resume the system from sleep states on RTC alarm.
Support RTC alarm if the virtio-rtc alarm feature is present. The
virtio-rtc device signals an alarm by marking an alarmq buffer as used.
Peculiarities
-------------
A virtio-rtc clock is a bit special for an RTC clock in that
- the clock may step (also backwards) autonomously at any time and
- the device, and its notification mechanism, will be reset during boot or
resume from sleep.
The virtio-rtc device avoids that the driver might miss an alarm. The
device signals an alarm whenever the clock has reached or passed the alarm
time, and also when the device is reset (on boot or resume from sleep), if
the alarm time is in the past.
Open Issue
----------
The CLOCK_BOOTTIME_ALARM will use the RTC clock to wake up from sleep, and
implicitly assumes that no RTC clock steps will occur during sleep. The RTC
class driver does not know whether the current alarm is a real-time alarm
or a boot-time alarm.
Perhaps this might be handled by the driver also setting a virtio-rtc
monotonic alarm (which uses a clock similar to CLOCK_BOOTTIME_ALARM). The
virtio-rtc monotonic alarm would just be used to wake up in case it was a
CLOCK_BOOTTIME_ALARM alarm.
Otherwise, the behavior should not differ from other RTC class drivers.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Message-Id: <20250509160734.1772-5-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For platforms using the Arm Generic Timer, add precise cross-timestamping
support to virtio_rtc.
Always report the CP15 virtual counter as the HW counter in use by
arm_arch_timer, since the Linux kernel's usage of the Arm Generic Timer
should always be compatible with this.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-4-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Expose the virtio_rtc clocks as PTP clocks to userspace, similar to
ptp_kvm. virtio_rtc can expose multiple clocks, e.g. a UTC clock and a
monotonic clock.
Userspace should distinguish different clocks through the name assigned by
the driver. In particular, UTC-like clocks can also be distinguished by if
and how leap seconds are smeared. udev rules such as the following can be
used to get different symlinks for different clock types:
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 0/variant 0", SYMLINK += "ptp_virtio"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 1/variant 0", SYMLINK += "ptp_virtio_tai"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 2/variant 0", SYMLINK += "ptp_virtio_monotonic"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 3/variant 0", SYMLINK += "ptp_virtio_smear_unspecified"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 3/variant 1", SYMLINK += "ptp_virtio_smear_noon_linear"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 3/variant 2", SYMLINK += "ptp_virtio_smear_sls"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 4/variant 0", SYMLINK += "ptp_virtio_maybe_smeared"
The preferred PTP clock reading method is ioctl PTP_SYS_OFFSET_PRECISE2,
through the ptp_clock_info.getcrosststamp() op. For now,
PTP_SYS_OFFSET_PRECISE2 will return -EOPNOTSUPP through a weak function.
PTP_SYS_OFFSET_PRECISE2 requires cross-timestamping support for specific
clocksources, which will be added in the following. If the clocksource
specific code is enabled, check that the Virtio RTC device supports the
respective HW counter before obtaining an actual cross-timestamp from the
Virtio device.
The Virtio RTC device response time may be higher than the timekeeper
seqcount increment interval. Therefore, obtain the cross-timestamp before
calling get_device_system_crosststamp().
As a fallback, support the ioctl PTP_SYS_OFFSET_EXTENDED2 for all
platforms.
Assume that concurrency issues during PTP clock removal are avoided by the
posix_clock framework.
Kconfig recursive dependencies prevent virtio_rtc from implicitly enabling
PTP_1588_CLOCK, therefore just warn the user if PTP_1588_CLOCK is not
available. Since virtio_rtc should in the future also expose clocks as RTC
class devices, do not depend VIRTIO_RTC on PTP_1588_CLOCK.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-3-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add the virtio_rtc module and driver core. The virtio_rtc module implements
a driver compatible with the proposed Virtio RTC device specification.
The Virtio RTC (Real Time Clock) device provides information about current
time. The device can provide different clocks, e.g. for the UTC or TAI time
standards, or for physical time elapsed since some past epoch. The driver
can read the clocks with simple or more accurate methods.
Implement the core, which interacts with the Virtio RTC device. Apart from
this, the core does not expose functionality outside of the virtio_rtc
module. Follow-up patches will expose PTP clocks and an RTC Class device.
Provide synchronous messaging, which is enough for the expected time
synchronization use cases through PTP clocks (similar to ptp_kvm) or RTC
Class device.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-2-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the bvec_kmap_local helper rather than digging into the bvec
internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20250501142244.2888227-1-hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct kvec *", but the returned type will be
"struct iovec *". These have the same allocation size, so there is no
bug:
struct kvec {
void *iov_base; /* and that should *never* hold a userland pointer */
size_t iov_len;
};
struct iovec
{
void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */
__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
};
Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Message-Id: <20250426062214.work.334-kees@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The result size returned by virtio_pci_admin_dev_parts_get() is 8 bytes
larger than the actual result data size. This occurs because the
result_sg_size field of the command is filled with the result length
from virtqueue_get_buf(), which includes both the data size and an
additional 8 bytes of status.
This oversized result size causes two issues:
1. The state transferred to the destination includes 8 bytes of extra
data at the end.
2. The allocated buffer in the kernel may be smaller than the returned
size, leading to failures when reading beyond the allocated size.
The commit fixes this by subtracting the status size from the result of
virtqueue_get_buf().
This fix has been tested through live migrations with virtio-net,
virtio-net-transitional, and virtio-blk devices.
Fixes: 704806ca400e ("virtio: Extend the admin command to include the result size")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1745318025-23103-1-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
PCI region request functions such as pci_request_region() currently have
the problem of becoming sometimes managed functions, if
pcim_enable_device() instead of pci_enable_device() was called. The PCI
subsystem wants to remove this deprecated behavior from its interfaces.
octeopn_ep enables its device with pcim_enable_device() (for VF. PF uses
manual management), but does so only to get automatic disablement. The
driver wants to manage its PCI resources for VF manually, without devres.
The easiest way not to use automatic resource management at all is by
also handling device enable- and disablement manually.
Replace pcim_enable_device() with pci_enable_device(). Add the necessary
calls to pci_disable_device().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Acked-by: Vamsi Attunuru <vattunuru@marvell.com>
Message-Id: <20250508085134.24084-2-phasta@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Philipp Stanner <<a href="mailto:phasta@kernel.org" target="_blank">phasta@kernel.org</a>><br>
Acked-by: Vamsi Attunuru <<a href="mailto:vattunuru@marvell.com" target="_blank">vattunuru@marvell.com</a>><br>
|
|
This reverts commit d6e020819612a4a06207af858e0978be4d3e3140.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] https://github.com/intel/media-driver/commit/93c07d9b4b96a78bab21f6acd4eb863f4313ea4a
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d2dc30e0aa252830f908c8e793d3139d51321370)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9bd ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
(cherry picked from commit d6e020819612a4a06207af858e0978be4d3e3140)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Reported an IO hang and unrecoverable error in our testing environment.
After careful research, we found that bch_allocator_thread is stuck,
the call stack is as follows:
[<0>] __switch_to+0xbc/0x108
[<0>] __closure_sync+0x7c/0xbc [bcache]
[<0>] bch_prio_write+0x430/0x448 [bcache]
[<0>] bch_allocator_thread+0xb44/0xb70 [bcache]
[<0>] kthread+0x124/0x130
[<0>] ret_from_fork+0x10/0x18
Moreover, the RESERVE_BTREE type bucket slot are empty and journal_full
occurs at the same time.
When the cache disk is first used, the sb.nJournal_buckets defaults to 0.
So, only 8 RESERVE_BTREE type buckets are reserved. If RESERVE_BTREE type
buckets used up or btree_check_reserve() failed when request handle btree
split, the request will be repeatedly retried and wait for alloc thread to
fill in.
After the alloc thread fills the buckets, it will call bch_prio_write().
If journal_full occurs simultaneously at this time, journal_reclaim() and
btree_flush_write() will be called sequentially, journal_write cannot be
completed.
This is a low probability event, we believe that reserve more RESERVE_BTREE
buckets can avoid the worst situation.
Fixes: 682811b3ce1a ("bcache: fix for allocator and register thread race")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-4-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove constants MAX_NEED_GC and MAX_SAVE_PRIO in btree.c that have been unused
since initial commit.
Signed-off-by: Robert Pang <robertpang@google.com>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-3-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
1. LINE#1794 - LINE#1887 is some codes about function of
bch_cache_set_alloc().
2. LINE#2078 - LINE#2142 is some codes about function of
register_cache_set().
3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098.
1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
1795 {
...
1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) ||
1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) ||
1862 mempool_init_kmalloc_pool(&c->bio_meta, 2,
1863 sizeof(struct bbio) + sizeof(struct bio_vec) *
1864 bucket_pages(c)) ||
1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) ||
1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) ||
1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) ||
1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc",
1870 WQ_MEM_RECLAIM, 0)) ||
1871 bch_journal_alloc(c) ||
1872 bch_btree_cache_alloc(c) ||
1873 bch_open_buckets_alloc(c) ||
1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
1875 goto err;
^^^^^^^^
1876
...
1883 return c;
1884 err:
1885 bch_cache_set_unregister(c);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
1886 return NULL;
1887 }
...
2078 static const char *register_cache_set(struct cache *ca)
2079 {
...
2098 c = bch_cache_set_alloc(&ca->sb);
2099 if (!c)
2100 return err;
^^^^^^^^^^
...
2128 ca->set = c;
2129 ca->set->cache[ca->sb.nr_this_dev] = ca;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
2138 return NULL;
2139 err:
2140 bch_cache_set_unregister(c);
2141 return err;
2142 }
(1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and
call bch_cache_set_unregister()(LINE#1885).
(2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return.
(3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the
value to c->cache[], it means that c->cache[] is NULL.
LINE#1624 - LINE#1665 is some codes about function of cache_set_flush().
As (1), in LINE#1885 call
bch_cache_set_unregister()
---> bch_cache_set_stop()
---> closure_queue()
-.-> cache_set_flush() (as below LINE#1624)
1624 static void cache_set_flush(struct closure *cl)
1625 {
...
1654 for_each_cache(ca, c, i)
1655 if (ca->alloc_thread)
^^
1656 kthread_stop(ca->alloc_thread);
...
1665 }
(4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the
kernel crash occurred as below:
[ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory
[ 846.713242] bcache: register_bcache() error : failed to register device
[ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered
[ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8
[ 846.714790] PGD 0 P4D 0
[ 846.715129] Oops: 0000 [#1] SMP PTI
[ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1
[ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018
[ 846.716451] Workqueue: events cache_set_flush [bcache]
[ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache]
[ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 00 48 85 ff 74 05 e8 b6 58 a2 e1 0f b7 95 3c f7
[ 846.718026] RSP: 0018:ffffb56dcf85fe70 EFLAGS: 00010202
[ 846.718372] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 846.718725] RDX: 0000000000000001 RSI: 0000000040000001 RDI: 0000000000000000
[ 846.719076] RBP: ffffa0ccc0f20df8 R08: ffffa0ce1fedb118 R09: 000073746e657665
[ 846.719428] R10: 8080808080808080 R11: 0000000000000000 R12: ffffa0ce1fee8700
[ 846.719779] R13: ffffa0ccc0f211a8 R14: ffffa0cd1b902840 R15: ffffa0ccc0f20e00
[ 846.720132] FS: 0000000000000000(0000) GS:ffffa0ce1fec0000(0000) knlGS:0000000000000000
[ 846.720726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 846.721073] CR2: 00000000000009f8 CR3: 00000008ba00a005 CR4: 00000000007606e0
[ 846.721426] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 846.721778] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 846.722131] PKRU: 55555554
[ 846.722467] Call Trace:
[ 846.722814] process_one_work+0x1a7/0x3b0
[ 846.723157] worker_thread+0x30/0x390
[ 846.723501] ? create_worker+0x1a0/0x1a0
[ 846.723844] kthread+0x112/0x130
[ 846.724184] ? kthread_flush_work_fn+0x10/0x10
[ 846.724535] ret_from_fork+0x35/0x40
Now, check whether that ca is NULL in LINE#1655 to fix the issue.
Signed-off-by: Linggang Zeng <linggang.zeng@easystack.cn>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-2-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the `#[cfg(CONFIG_OF)]` attribute to the top of the documentation test
block and hide it. This applies the condition to the entire test and improves
readability.
Placing configuration flags like `CONFIG_OF` at the top serves as a clear
indicator of the conditions under which the example is valid, effectively
acting like configuration metadata for the example itself.
Suggested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d93c783cc4419f16dd8942a4359d74bc0149203.1748323971.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The controls between the tas5717 and tas5733 should not be shared since
the biquad and register setup is not identical. For example, writing to
0x5c on the tas5717 modifies ch2_bq[10] while on the tas5733 this is
ch1_cross_bq[3].
see https://www.ti.com/lit/ds/symlink/tas5733l.pdf and
https://www.ti.com/lit/ds/symlink/tas5717.pdf for more details on the
register maps.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Link: https://patch.msgid.link/20250527-tas5733-biquad-fix-v1-1-0d3d941700bb@openpixelsystems.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the first cpu_node = of_cpu_device_node_get() fails then the cleanup.h
code will try to free "state_node" but it hasn't been initialized yet.
Declare the device_nodes where they are initialized to fix this.
Fixes: 5836ebeb4a2b ("cpuidle: psci: Avoid initializing faux device if no DT idle states are present")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRcfU8O8sez1x7@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The error code is not set correctly on if kasprintf() fails. On the
first iteration it would return -EINVAL and subsequent iterations
would return success. Set it to -ENOMEM.
In real life, this allocation will not fail and if it did the system
will not boot so this change is mostly to silence static checker warnings
more than anything else.
Fixes: 04f53540f791 ("ACPI: MRRM: Add /sys files to describe memory ranges")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVTfEm-Jch7FuHG@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Call acpi_put_table() before returning the error code.
Fixes: e54b1dc1c4f0 ("ACPI: APEI: EINJ: Remove redundant calls to einj_get_available_error_type()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRBok33LZhXcId@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add bindings for the SOPHGO SG2042 SPI-NOR flash controller,
which is compatible with SOPHGO SG2044.
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20250525-sfg-spifmc-v2-1-a3732b6f5ab4@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the zoned mode there's a bug in the extent buffer tree conversion to
xarray. The reference for eb is dropped and code continues but the
references get dropped by releasing the batch.
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/linux-btrfs/202505191521.435b97ac-lkp@intel.com/
Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
* for-next/vdso:
arm64: vdso: Use __arch_counter_get_cntvct()
|
|
* for-next/sme-fixes: (35 commits)
arm64/fpsimd: Allow CONFIG_ARM64_SME to be selected
arm64/fpsimd: ptrace: Gracefully handle errors
arm64/fpsimd: ptrace: Mandate SVE payload for streaming-mode state
arm64/fpsimd: ptrace: Do not present register data for inactive mode
arm64/fpsimd: ptrace: Save task state before generating SVE header
arm64/fpsimd: ptrace/prctl: Ensure VL changes leave task in a valid state
arm64/fpsimd: ptrace/prctl: Ensure VL changes do not resurrect stale data
arm64/fpsimd: Make clone() compatible with ZA lazy saving
arm64/fpsimd: Clear PSTATE.SM during clone()
arm64/fpsimd: Consistently preserve FPSIMD state during clone()
arm64/fpsimd: Remove redundant task->mm check
arm64/fpsimd: signal: Use SMSTOP behaviour in setup_return()
arm64/fpsimd: Add task_smstop_sm()
arm64/fpsimd: Factor out {sve,sme}_state_size() helpers
arm64/fpsimd: Clarify sve_sync_*() functions
arm64/fpsimd: ptrace: Consistently handle partial writes to NT_ARM_(S)SVE
arm64/fpsimd: signal: Consistently read FPSIMD context
arm64/fpsimd: signal: Mandate SVE payload for streaming-mode state
arm64/fpsimd: signal: Clear PSTATE.SM when restoring FPSIMD frame only
arm64/fpsimd: Do not discard modified SVE state
...
|
|
* for-next/selftests:
kselftest/arm64: Set default OUTPUT path when undefined
kselftest/arm64: fp-ptrace: Adjust to new inactive mode behaviour
kselftest/arm64: fp-ptrace: Adjust to new VL change behaviour
kselftest/arm64: tpidr2: Adjust to new clone() behaviour
kselftest/arm64: fp-ptrace: Fix expected FPMR value when PSTATE.SM is changed
|
|
* for-next/psci:
firmware: psci: Fix refcount leak in psci_dt_init
|
|
* for-next/perf:
perf/arm-cmn: Add CMN S3 ACPI binding
perf/arm-cmn: Initialise cmn->cpu earlier
perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()
perf/arm-cmn: Fix REQ2/SNP2 mixup
perf: Do not enable by default during compile testing
perf: arm-ni: Fix missing platform_set_drvdata()
perf: arm-ni: Unregister PMUs on probe failure
perf/arm-cmn: Remove CMN-600 DTC domain special case
|
|
* for-next/mm:
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
arm64: hugetlb: Use __set_ptes_anysz() and __ptep_get_and_clear_anysz()
arm64/mm: Refactor __set_ptes() and __ptep_get_and_clear()
mm/page_table_check: Batch-check pmds/puds just like ptes
arm64: hugetlb: Refine tlb maintenance scope
arm64: hugetlb: Cleanup huge_pte size discovery mechanisms
arm64: pageattr: Explicitly bail out when changing permissions for vmalloc_huge mappings
arm64: Support ARM64_VA_BITS=52 when setting ARCH_MMAP_RND_BITS_MAX
arm64/mm: Remove randomization of the linear map
|
|
* for-next/misc:
arm64/cpuinfo: only show one cpu's info in c_show()
arm64: Extend pr_crit message on invalid FDT
arm64: Kconfig: remove unnecessary selection of CRC32
arm64: Add missing includes for mem_encrypt
|
|
Merge in for-next/fixes, as subsequent improvements to our early PI
code that disallow BSS exports depend on the 'arm64_use_ng_mappings'
fix here.
* for-next/fixes:
arm64: cpufeature: Move arm64_use_ng_mappings to the .data section to prevent wrong idmap generation
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
|
