summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-12usb: dwc3: omap: initialize the register offset values for omap5 and AM437xGeorge Cherian
This patch Initializes the register offset values depending on the X_MAJOR of USBOTGSS_REVISION register. Also adds register offset defines and new debug register defines. X_MAJOR is 2 for both OMAP5 and AM437x. But both have different glue register layout. Differentiate AM437x using dt compatible. Register offsets are cached in dwc3_omap struct for reg reads and writes. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-12usb: dwc3: omap: Adding am437x specific register map changesGeorge Cherian
AM437x and OMAP5 dwc3 subsytem have different register map. Major differences are as follows. OMAP5 has one main interrupt and one misc interrupt Aegis has four main interrupts and one misc interrupt. Miscellanous Interrupt offsets are changed. UTMI OTG Control and Status Registers offsets are changed. DEBUG Configuration and Status Registers are changed. The main intend of the patch is to re-use the same wrapper driver for both OMAP5 and AM437x, by using the x_major in revision register and adjusting the offsets. This patch adds the register map offsets and adds offset variables in struct dwc3_omap to cache the offsets Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-12usb: gadget: f_mass_storage: fix default product nameAndrzej Pietrasiewicz
If cfg->product name is not set, a default name is chosen depending on the common->luns->cdrom flag. If the flag is set the name should be "File-CD Gadget", and if the flag is not set the name should be "File-Stor Gadget". Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-12usb: dwc3: omap: improve error handling of dwc3_omap_probeKishon Vijay Abraham I
Improved the error handling of dwc3_omap_probe so that on error conditions dwc3_omap is left in the original state. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: add Faraday fotg210_udc driverYuan-Hsin Chen
Faraday fotg210 udc driver supports only Bulk transfer so far. fotg210 could be configured as an USB2.0 peripheral. This driver is tested with mass storage gadget driver on Faraday EVB a369. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_rndis: add configfs supportAndrzej Pietrasiewicz
f_rndis learns about configfs so we can, eventually, remove in-kernel gadget drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_rndis: use usb_gstrings_attachAndrzej Pietrasiewicz
use new usb_gstrings_attach interface Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: rndis: init & exit rndis at module load/unloadAndrzej Pietrasiewicz
This is required in preparation for using usb_gstrings_attach. The rndis initialization so far has been performed on the first occurence of rndis_bind(), but the condition to check it (first or not first) was "borrowed" from strings handling. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: ether: convert to new interface of f_rndisAndrzej Pietrasiewicz
use new interface so old one can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_rndis: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting rndis to the new function interface requires converting the USB rndis' function code and its users. This patch converts the f_rndis.c to the new function interface. The file is now compiled into a separate usb_f_rndis.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_subset: add configfs supportAndrzej Pietrasiewicz
f_subset learns about configfs so we can, eventually, remove in-kernel gadget drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_subset: use usb_gstrings_attachAndrzej Pietrasiewicz
use the new usb_gstrings_attach interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: ether: convert to new interface of f_subsetAndrzej Pietrasiewicz
teach ethernet code about the new interface of f_subset so the old one can eventually be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_subset: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting ecm subset to the new function interface requires converting the USB subset's function code and its users. This patch converts the f_subset.c to the new function interface. The file is now compiled into a separate usb_f_subset.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: multi: Remove unused includeAndrzej Pietrasiewicz
cleanup only, no functional changes. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_eem: add configfs supportAndrzej Pietrasiewicz
f_eem learns about our configfs interface so we can remove in-kernel gadget drivers in future. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_eem: use usb_gstrings_attachAndrzej Pietrasiewicz
use the new usb_gstrings_attach interface Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_eem: remove compatibility layerAndrzej Pietrasiewicz
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: ether: convert to new interface of f_eemAndrzej Pietrasiewicz
use new interface so old one can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_eem: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting eem to the new function interface requires converting the USB eem's function code and its users. This patch converts the f_eem.c to the new function interface. The file is now compiled into a separate usb_f_eem.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: ether: convert to new interface of f_ecmAndrzej Pietrasiewicz
moving to new interface so we can remove the older one. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: u_ether: allow getting binary-form host addressAndrzej Pietrasiewicz
helper function to copy MAC address to proper place. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_phonet: add configfs supportAndrzej Pietrasiewicz
f_phonet learns about configfs so we can remove in-kernel gadget drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: nokia: convert to new interface of f_ecmAndrzej Pietrasiewicz
this will let us deprecate (and remove) the old interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_phonet: remove compatibility layerAndrzej Pietrasiewicz
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: nokia: convert to new interface of f_phonetAndrzej Pietrasiewicz
use the new interface which will allow us to deprecate the legacy way of binding functions. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_phonet: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting f_phonet to the new function interface requires converting the f_phonet's function code and its users. This patch converts the f_phonet.c to the new function interface. The file is now compiled into a separate usb_f_phonet.ko module. The old function interface is provided by means of preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: phonet: move global dev variable to its userAndrzej Pietrasiewicz
cleanup patch only in preparation for configfs. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_obex: remove compatibility layerAndrzej Pietrasiewicz
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: nokia: convert to new interface of f_obexAndrzej Pietrasiewicz
preparation to use configfs-based approach on g_nokia.ko Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_obex: use usb_gstrings_attachAndrzej Pietrasiewicz
use the new usb_gstrings_attach interface Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ecm: add configfs supportAndrzej Pietrasiewicz
f_ecm learns about our new configfs-based binding. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ecm: use usb_gstrings_attachAndrzej Pietrasiewicz
use the new usb_gstrings_attach interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: cdc2: convert to new interface of f_ecmAndrzej Pietrasiewicz
f_ecm has been converted to new configfs infrastructure, fixing cdc2 gadget driver. [ balbi@ti.com : fixed a bunch of errors when adding ECM function ] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ecm: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting ecm to the new function interface requires converting the USB ecm's function code and its users. This patch converts the f_ecm.c to the new function interface. The file is now compiled into a separate usb_f_ecm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: add helpers for configfs support for USB EthernetAndrzej Pietrasiewicz
All USB Ethernet functions will have very similar attributes in configfs. This patch provides helper definitions to ease writing the functions and reduce source code duplication. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ncm: add configfs supportAndrzej Pietrasiewicz
Add configfs support to the NCM function driver so that we can, eventually, get rid of kernel-based gadget drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ncm: use usb_gstrings_attachAndrzej Pietrasiewicz
Trivial patch making use of the new usb_gstrings_attach interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ncm: remove compatibility layerAndrzej Pietrasiewicz
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: ncm: convert to new function interfaceAndrzej Pietrasiewicz
Utilize our new configfs-based interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ncm: convert to new function interface with backward ↵Andrzej Pietrasiewicz
compatibility Converting ncm to the new function interface requires converting the USB ncm's function code and its users. This patch converts the f_ncm.c to the new function interface. The file is now compiled into a separate usb_f_ncm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: u_ether: construct with default values and add setters/gettersAndrzej Pietrasiewicz
Add an interface to create a struct netdev_dev filled with default values, an interface which makes it an interface to fill the struct with useful values and an interface to read the values set. The patch also adds an interface to register the net device associated with an ethernet-over-usb link. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: rndis: convert into moduleAndrzej Pietrasiewicz
In order to convert to configfs the usb functions need to be converted to a new interface and compiled as modules. This patch creates an rndis module which will be used by the new functions. After all users of f_rndis are converted to the new interface, this module can be merged with f_rndis module. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: u_ether: convert into moduleAndrzej Pietrasiewicz
u_ether.c has been #include'd by all gadgets which implement USB Ethernet functions. In order to add configfs support, the f_ecm.c, f_eem.c, f_ncm.c, f_subset.c, f_rndis.c need to be converted into modules and must not be #include'd. Consequently, the u_ether.c needs to be a module too, in a manner similar to u_serial.c. The resulting module should not take any parameters, so they are pushed to the current users of it, that is ether.c, g_ffs.c, multi.c, ncm.c, nokia.c. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_neededUCHINO Satoshi
Without this memory barrier, the file-storage thread may fail to escape from the following while loop, because it may observe new common->thread_wakeup_needed and old bh->state which are updated by the callback functions. /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { rc = sleep_thread(common); if (rc) return rc; } Cc: stable@vger.kernel.org Signed-off-by: UCHINO Satoshi <satoshi.uchino@toshiba.co.jp> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10USB: gadget: f_uac2: Fix broken prm to uac2 mappingJassi Brar
prm_to_uac2() is broken because it tests against pointer it itself mapped onto, which will never be different. Fix the mapping by adding pointer to parent chip in each rtd param and removing the prm_to_uac2(). Reported-by: Julien Rouviere <jrouviere@qualistream.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: r8a66597-udc: do not unlock unheld spinlock in ↵Alexey Khoroshilov
r8a66597_sudmac_irq() r8a66597_irq() processes sudmac part (r8a66597_sudmac_irq()) before locking r8a66597->lock. But transfer_complete(), that is called inside (r8a66597_sudmac_irq()->sudmac_finish()->transfer_complete()), expects r8a66597->lock is locked. As a result unheld spinlock can be unlocked. The patch just moves locking before calling r8a66597_sudmac_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-04usb: gadget: uvc: Implement videobuf2 .wait_prepare and .wait_finish operationsMichael Grzeschik
Those optional operations are used to release and reacquire the queue lock when videobuf2 needs to perform operations that sleep for a long time, such as waiting for a buffer to be complete. Implement them to avoid blocking qbuf or streamoff calls when a dqbuf is in progress. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-01usb: phy: omap-usb3: updated dpll M,N values to support DRA7xx devicesRuchika Kharwar
Addition of the M and N recommended values for the USB3 PHY DPLL. Sysclk for DRA7xx is 20MHz. This yields: Clk = 20MHz * M/(N+1) = 20MHz * 1000 /(7+1) = 2.5 Ghz Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-01usb: dwc3: remove redundant D0 power state setYijing Wang
Pci_enable_device() will set device power state to D0, so it's no need to do it again in dwc3_pci_probe(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 16:49:33 +0000