summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-06iwlwifi: mvm: remove the d0i3 entry/exit flowEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: remove the tx defer for d0i3Emmanuel Grumbach
This is not needed anymore Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: start to remove the code for d0i3Emmanuel Grumbach
For runtime PM to work with d0i3 code, a lot of integration work needs to be done with the platform (e.g. the out-of-band wake up interrupt) and we currently don't have any platforms where this integration happened. So, this code has been pretty much stale for a while and when someone enables it, it just breaks things. Therefore, to simplify the code base and make sure no one enables this by mistake, we will remove the whole code. This is only the very start, much more work is needed. Remove the places where we check iwl_mvm_is_d0i3_supported but leave all the refs, those will be removed in a different patch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: add the skb length to a printShaul Triebitz
When printing a TX, add to the print the length of the frame. That will help with BSEP (buffer status report poll) tests. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: fix scan config command sizeBeker Ayala
Use the actual length of channels array and not the max capable length. Signed-off-by: Beker Ayala <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add ldbg config cmd debug printShahar S Matityahu
add support to print ldbg command in mvm and xvt mode Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg: support debug recording suspend resume commandShahar S Matityahu
Support the new DBGC_SUSPEND_RESUME command to change the recording state. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg: move debug recording stop from trans to op modeShahar S Matityahu
The op mode should stop the debug recording and not the transport layer. Rename iwl_fwrt_stop_device into iwl_fw_dbg_stop_sync and move the debug stop recording to it. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg: move monitor recording functionality from header fileShahar S Matityahu
The recording functions are quite big to be inline and the driver should expose only the stop and restart functions that are allowed to be used rather then the internal helper functions. Move the functions from the header file. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: remove unnecessary forward declarationsJohannes Berg
These static functions are only used after their definition, so we don't need the forward declarations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: Block 26-tone RU OFDMA transmissionsIlan Peer
In case that there are OBSS that do not know how to properly interpret 26-tone RU OFDMA transmissions, instruct the FW not to use such transmissions. The check is currently only performed upon association. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: remove redundant condition in iwl_mvm_set_hw_rfkill_stateEmmanuel Grumbach
If mvm->fwrt.cur_fw_img != IWL_UCODE_INIT, then rfkill_safe_init_done must be true since rfkill_safe_init_done is set to true before we start to load the runtime image. Remove the redundant condition. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: Send DQA enable command only if TVL is onIlia Lin
The newer targets don't support the DQA enablement command and will return error status, while older targets need it. The feature is defined by the corresponding TLV. Send the command only if the TLV is enabled. Signed-off-by: Ilia Lin <ilia.lin@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: bump FW API to 49 for 22000 seriesLuca Coelho
Start supporting API version 49 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06Merge tag 'mt76-for-kvalo-2019-09-05' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.4 * beacon tx fix for mt76x02 * sparse/checkpatch warning fixes * DFS pattern detector for mt7615 (DFS channels not enabled yet) * CSA support for mt7615 * mt7615 cleanup/fixes * mt7615 rate control improvements * usb fixes * mt7615 powersave buffering fix * new device support for mt76x0 * support for more ciphers in mt7615 * watchdog time fixes * smart carrier sense on mt7615 * survey support on mt7615 * multiple interfaces on mt76x02u * calibration data fix for mt7615 * fix for sending BAR after disassoc
2019-09-05net/mlx5e: Add port buffer's congestion countersAya Levin
Add 3 counters per priority to ethtool using PPCNT: 1) rx_prio[p]_buf_discard - the number of packets discarded by device due to lack of per host receive buffers 2) rx_prio[p]_cong_discard - the number of packets discarded by device due to per host congestion 3) rx_prio[p]_marked - the number of packets ECN marked by device due to per host congestion Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: Expose HW capability bits for port buffer per priority congestion ↵Aya Levin
counters Map capability bit indicating that HCA supports port buffer's congestion counters. Also map registers with the corresponding counters. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: DR, Remove redundant dev_name print from err logSaeed Mahameed
mlx5_core_err already prints the name of the device. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: DR, Fix error return code in dr_domain_init_resources()Wei Yongjun
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4ec9e7b02697 ("net/mlx5: DR, Expose steering domain functionality") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: DR, Remove useless set memory to zero use memset()Wei Yongjun
The memory return by kzalloc() has already be set to zero, so remove useless memset(0). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Remove unnecessary clear_bit()sMaxim Mikityanskiy
Don't clear MLX5E_SQ_STATE_ENABLED on error in mlx5e_open_txqsq and mlx5e_open_icosq, because it's not set there, and is 0 by default. Fixes: acc6c5953af1 ("net/mlx5e: Split open/close channels to stages") Fixes: 9d18b5144a0a ("net/mlx5e: Split open/close ICOSQ into stages") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: kTLS, Remove unused function parameterTariq Toukan
SKB parameter is no longer used in tx_post_resync_dump(), remove it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: Use PTR_ERR_OR_ZERO rather than its implementationzhong jiang
PTR_ERR_OR_ZERO contains if(IS_ERR(...)) + PTR_ERR. It is better to use it directly. hence just replace it. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: fix missing assignment of variable errColin Ian King
The error return from a call to mlx5_flow_namespace_set_peer is not being assigned to variable err and hence the error check following the call is currently not working. Fix this by assigning ret as intended. Addresses-Coverity: ("Logically dead code") Fixes: 8463daf17e80 ("net/mlx5: Add support to use SMFS in switchdev mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: fix spelling mistake "offlaods" -> "offloads"Colin Ian King
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Remove leftover declarationRoi Dayan
This function was removed in the cited commit below. Fixes: 13e509a4c194 ("net/mlx5e: Remove leftover code from the PF netdev being uplink rep") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Use ipv6_stub to avoid dependency with ipv6 being a moduleSaeed Mahameed
mlx5 is dependent on IPv6 tristate since we use ipv6's nd_tbl directly, alternatively we can use ipv6_stub->nd_tbl and remove the dependency. Reported-by: Walter Harms <wharms@bfs.de> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: Kconfig: Fix MLX5_CORE dependency with PCI_HYPERV_INTERFACEMao Wenan
When MLX5_CORE=y and PCI_HYPERV_INTERFACE=m, below errors are found: drivers/net/ethernet/mellanox/mlx5/core/en_main.o: In function `mlx5e_nic_enable': en_main.c:(.text+0xb649): undefined reference to `mlx5e_hv_vhca_stats_create' drivers/net/ethernet/mellanox/mlx5/core/en_main.o: In function `mlx5e_nic_disable': en_main.c:(.text+0xb8c4): undefined reference to `mlx5e_hv_vhca_stats_destroy' Fix this by making MLX5_CORE imply PCI_HYPERV_INTERFACE. Fixes: cef35af34d6d ("net/mlx5e: Add mlx5e HV VHCA stats agent") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Fix static checker warning of potential pointer math issueEran Ben Elisha
Cited patch have an issue in WARN_ON_ONCE check, with wrong address ranges are compared. Fix that by changing pointer types from u64* to void*. This will also make code simpler to read. In addition mlx5e_hv_vhca_fill_ring_stats can get void pointer, so remove the unnecessary casting when calling it. Found by static checker: drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c:41 mlx5e_hv_vhca_fill_stats() warn: potential pointer math issue ('buf' is a u64 pointer) Fixes: cef35af34d6d ("net/mlx5e: Add mlx5e HV VHCA stats agent") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05mt76: mt7615: add support to read temperature from mcuLorenzo Bianconi
Introduce debugfs entry to read device temperature and related cmu command. Introduce mt7615_mcu_parse_response to parse mcu response messages and refactor mt7615_mcu_msg_send routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: introduce mt7615_txwi_to_txp utility routineLorenzo Bianconi
Introduce mt7615_txwi_to_txp utility routine to convert mt76_txwi_cache into mt7615_txp and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7603: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x0: remove unneeded return value on set channelStanislaw Gruszka
We allways return 0 from mt76x0_phy_set_channel(), no need to pass return value upward. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x0: remove redundant chandef copyStanislaw Gruszka
We set dev->mt76.chandef in mt76_set_channel() already. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: make mt76_rx_convert staticStanislaw Gruszka
mt76_rx_convert() not need to be exported any longer. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: remove offchannel check in tx schedulingFelix Fietkau
tx queues are already disabled by mac80211 during scanning or other off-channel activity. There is no need to repeat the check in mt76, since scheduled queues are selected by mac80211 as well. Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: do not send BAR frame on tx aggregation flush stopFelix Fietkau
There is no need to send a BAR frame after stopping aggregation, and doing so could lead to sending class 3 frames after deauthentication from an AP Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: stop rx aggregation on station removalFelix Fietkau
Fixes use-after-free issues on forced station removal during hardware restart on MT76x02 Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: dma: reset q->rx_head on rx resetFelix Fietkau
Fixes rx of the first frame if a fragmented rx was interrupted by the reset Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: apply calibration-free data from OTPFelix Fietkau
MT7615 chips usually come pre-calibrated, even when used on embedded boards. In that case, the on-flash EEPROM data needs to be merged with some data from OTP ROM. Run this merge if the external EEPROM data is valid and OTP has valid fields. Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_completeLorenzo Bianconi
Introduce a default implementation for mt76_sw_scan and mt76_sw_scan_complete in mt76 module and remove duplicated code since most of the drivers share the same implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: fix some checkpatch warningsRyder Lee
This fixes the following checkpatch warnings: CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: add BIP_CMAC_128 cipher supportLorenzo Bianconi
Refactor mt7615_mac_wtbl_set_key and introduce the following routines in order to configure wtbl entries and properly add hw support to BIP_CMAC_128 cipher: - mt7615_mac_wtbl_update_cipher - mt7615_mac_wtbl_update_pk - mt7615_mac_wtbl_update_key Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7603: remove unnecessary mcu queue initializationLorenzo Bianconi
Remove unnecessary mcu queue initialization in mt7603_dma_init since it has been already done in mt76_mmio_init Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: move mt76_tx_tasklet in mt76 moduleLorenzo Bianconi
Move mt76{15,03}_tx_tasklet in mt76_alloc_device in order to be used as default tx_tasklet initialization. Remove duplicated code in mt7603/mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: enable survey supportLorenzo Bianconi
Introduce channel survey support for mt7615 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7603: move survey_time in mt76_devLorenzo Bianconi
Move survey_time field in mt76_dev in order to be reused adding survey support to mt7615 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02u: enable survey supportLorenzo Bianconi
Introduce channel survey support for mt76x2u and mt76x0u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02u: enable multi-vif supportLorenzo Bianconi
Enable multi-interface support for mt76x02u driver. For the moment allow max two concurrent interfaces in order to preserve enough room for ps traffic since we are using beacon slots for it. I have successfully tested the following configuration: - AP + STA - AP0 + AP1 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:47:55 +0000