| Age | Commit message (Collapse) | Author |
|---|
|
Simply add EX_FLAG_CLEAR_AX to do as the .fixup used to do.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.899657959@infradead.org
|
|
In the vmread exceptin path, use the, thus far, unused output register
to push the @fault argument onto the stack. This, in turn, enables the
exception handler to not do pushes and only modify that register when
an exception does occur.
As noted by Sean the input constraint needs to be changed to "=&r" to
avoid the value and field occupying the same register.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.781308550@infradead.org
|
|
KVM instruction emulation has a gnarly hack where the .fixup does a
return, however there's already a ret right after the 10b label, so
mark that as 11 and have the exception clear %esi to remove the
.fixup.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.722157053@infradead.org
|
|
Create and use EX_TYPE_ZERO_REG to clear the register and retry the
segment load on exception.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.663529463@infradead.org
|
|
Employ EX_TYPE_EFAULT_REG to store '-EFAULT' into the %[err] register
on exception. All the callers only ever test for 0, so the change
from -1 to -EFAULT is immaterial.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.604494664@infradead.org
|
|
Employ the fancy new EX_TYPE_IMM_REG to store -EFAULT in the return
register and use this to remove some Xen .fixup usage.
All callers of these functions only test for 0 return, so the actual
return value change from -1 to -EFAULT is immaterial.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.545019822@infradead.org
|
|
For the !CC_AS_ASM_GOTO_OUTPUT (aka. the legacy codepath), remove the
.fixup usage by employing both EX_TYPE_EFAULT_REG and EX_FLAG_CLEAR.
Like was already done for X86_32's version of __get_user_asm_u64() use
the "a" register for output, specifically so we can use CLEAR_AX.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.485154848@infradead.org
|
|
Use the new EX_TYPE_IMM_REG to store -EFAULT into the designated 'ret'
register, this removes the need for anonymous .fixup code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.426016322@infradead.org
|
|
Rework the MSR accessors to remove .fixup usage. Add two new extable
types (to the 4 already existing msr ones) using the new register
infrastructure to record which register should get the error value.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.364084212@infradead.org
|
|
In order to remove further .fixup usage, extend the extable
infrastructure to take additional information from the extable entry
sites.
Specifically add _ASM_EXTABLE_TYPE_REG() and EX_TYPE_IMM_REG that
extend the existing _ASM_EXTABLE_TYPE() by taking an additional
register argument and encoding that and an s16 immediate into the
existing s32 type field. This limits the actual types to the first
byte, 255 seem plenty.
Also add a few flags into the type word, specifically CLEAR_AX and
CLEAR_DX which clear the return and extended return register.
Notes:
- due to the % in our register names it's hard to make it more
generally usable as arm64 did.
- the s16 is far larger than used in these patches, future extentions
can easily shrink this to get more bits.
- without the bitfield fix this will not compile, because: 0xFF > -1
and we can't even extract the TYPE field.
[nathanchance: Build fix for clang-lto builds:
https://lkml.kernel.org/r/20211210234953.3420108-1-nathan@kernel.org
]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211110101325.303890153@infradead.org
|
|
Where possible, push the .fixup into code, at the tail of functions.
This is hard for macros since they're used in multiple functions,
therefore introduce a new extable handler to pop zeros.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101325.245184699@infradead.org
|
|
Place the anonymous .fixup code at the tail of the regular functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Link: https://lore.kernel.org/r/20211110101325.186049322@infradead.org
|
|
Place the anonymous .fixup code at the tail of the regular functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211110101325.127055887@infradead.org
|
|
Place the anonymous .fixup code at the tail of the regular functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211110101325.068505810@infradead.org
|
|
This code puts an exception table entry on the PREFETCH instruction to
overwrite it with a JMP.d8 when it triggers an exception. Except of
course, our code is no longer writable, also SMP.
Instead of fixing this broken mess, simply take it out.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YZKQzUmeNuwyvZpk@hirez.programming.kicks-ass.net
|
|
The test: 'mask > (typeof(_reg))~0ull' only works correctly when both
sides are unsigned, consider:
- 0xff000000 vs (int)~0ull
- 0x000000ff vs (int)~0ull
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211110101324.950210584@infradead.org
|
|
Make use of an upcoming GCC feature to mitigate
straight-line-speculation for x86:
https://gcc.gnu.org/g:53a643f8568067d7700a9f2facc8ba39974973d3
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102952
https://bugs.llvm.org/show_bug.cgi?id=52323
It's built tested on x86_64-allyesconfig using GCC-12 and GCC-11.
Maintenance overhead of this should be fairly low due to objtool
validation.
Size overhead of all these additional int3 instructions comes to:
text data bss dec hex filename
22267751 6933356 2011368 31212475 1dc43bb defconfig-build/vmlinux
22804126 6933356 1470696 31208178 1dc32f2 defconfig-build/vmlinux.sls
Or roughly 2.4% additional text.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.140103474@infradead.org
|
|
Currently, text_poke_bp() is very strict to only allow patching a
single instruction; however with straight-line-speculation it will be
required to patch: ret; int3, which is two instructions.
As such, relax the constraints a little to allow int3 padding for all
instructions that do not imply the execution of the next instruction,
ie: RET, JMP.d8 and JMP.d32.
While there, rename the text_poke_loc::rel32 field to ::disp.
Note: this fills up the text_poke_loc structure which is now a round
16 bytes big.
[ bp: Put comments ontop instead of on the side. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.082342723@infradead.org
|
|
Teach objtool to validate the straight-line-speculation constraints:
- speculation trap after indirect calls
- speculation trap after RET
Notable: when an instruction is annotated RETPOLINE_SAFE, indicating
speculation isn't a problem, also don't care about sls for that
instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.023037659@infradead.org
|
|
Replace all ret/retq instructions with ASM_RET in preparation of
making it more than a single instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.964635458@infradead.org
|
|
Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET defined.
find arch/x86/ -name \*.S | while read file
do
sed -i 's/\<ret[q]*\>/RET/' $file
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org
|
|
Principally, in order to get rid of #define RET in this code to make
place for a new RET, but also to clarify the code, rename a bunch of
things:
s/UNLOCK/IRQ_RESTORE/
s/LOCK/IRQ_SAVE/
s/BEGIN/BEGIN_IRQ_SAVE/
s/\<RET\>/RET_IRQ_RESTORE/
s/RET_ENDP/\tRET_IRQ_RESTORE\rENDP/
which then leaves RET unused so it can be removed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.841623970@infradead.org
|
|
In order to further enable commit:
bbe2df3f6b6d ("x86/alternative: Try inline spectre_v2=retpoline,amd")
add the new GCC flag -mindirect-branch-cs-prefix:
https://gcc.gnu.org/g:2196a681d7810ad8b227bf983f38ba716620545e
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102952
https://bugs.llvm.org/show_bug.cgi?id=52323
to RETPOLINE=y builds. This should allow fully inlining retpoline,amd
for GCC builds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20211119165630.276205624@infradead.org
|
|
Currently, RETPOLINE*_CFLAGS are defined in the top-level Makefile
but only x86 makes use of them. Move them there. If ever another
architecture finds the need, it can be reconsidered.
[ bp: Massage a bit. ]
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20211119165630.219152765@infradead.org
|
|
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is
now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
file name
- Fix compiler warnings by annotating parisc agp init functions with
__init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig"
* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
parisc/agp: Annotate parisc agp init functions with __init
parisc: Enable sata sil, audit and usb support on 64-bit defconfig
parisc: Fix KBUILD_IMAGE for self-extracting kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think there's a
community distro that has not reported this problem yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and
the xhci fix has been reported by many to resolve their reported
problem"
* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes for 5.16-rc4 to
resolve a number of reported problems.
They include:
- liteuart serial driver fixes
- 8250_pci serial driver fixes for pericom devices
- 8250 RTS line control fix while in RS-485 mode
- tegra serial driver fix
- msm_serial driver fix
- pl011 serial driver new id
- fsl_lpuart revert of broken change
- 8250_bcm7271 serial driver fix
- MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1
- vgacon fix for reported problem
All of these, except for the 8250_bcm7271 fix have been in linux-next
with no reported problem. The 8250_bcm7271 fix was added to the tree
on Friday so no chance to be linux-next yet. But it should be fine as
the affected developers submitted it"
* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_bcm7271: UART errors after resuming from S2
serial: 8250_pci: rewrite pericom_do_set_divisor()
serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
serial: 8250: Fix RTS modem control while in rs485 mode
Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
serial: liteuart: relax compile-test dependencies
serial: liteuart: fix minor-number leak on probe errors
serial: liteuart: fix use-after-free and memleak on unbind
serial: liteuart: Fix NULL pointer dereference in ->remove()
vgacon: Propagate console boot parameters before calling `vc_resize'
tty: serial: msm_serial: Deactivate RX DMA for polling support
serial: pl011: Add ACPI SBSA UART match id
serial: core: fix transmit-buffer reset and memleak
MAINTAINERS: Add rpmsg tty driver maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
mode runs for prolonged periods with interrupts disabled and ends up
programming the next tick in the past, leading to that storm
* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/nohz: Last resort update jiffies on nohz_full IRQ entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix a couple of SWAPGS fencing issues in the x86 entry code
- Use the proper operand types in __{get,put}_user() to prevent
truncation in SEV-ES string io
- Make sure the kernel mappings are present in trampoline_pgd in order
to prevent any potential accesses to unmapped memory after switching
to it
- Fix a trivial list corruption in objtool's pv_ops validation
- Disable the clocksource watchdog for TSC on platforms which claim
that the TSC is constant, doesn't stop in sleep states, CPU has TSC
adjust and the number of sockets of the platform are max 2, to
prevent erroneous markings of the TSC as unstable.
- Make sure TSC adjust is always checked not only when going idle
- Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
the FPU code
- Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention
* tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
x86/entry: Use the correct fence macro after swapgs in kernel CR3
x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
x86/64/mm: Map all kernel memory into trampoline_pgd
objtool: Fix pv_ops noinstr validation
x86/tsc: Disable clocksource watchdog for TSC on qualified platorms
x86/tsc: Add a timer to make sure TSC_adjust is always checked
x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog()
x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define
|
|
Pull more kvm fixes from Paolo Bonzini:
- Static analysis fix
- New SEV-ES protocol for communicating invalid VMGEXIT requests
- Ensure APICv is considered inactive if there is no APIC
- Fix reserved bits for AMD PerfEvtSeln register
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
KVM: x86/mmu: Retry page fault if root is invalidated by memslot update
KVM: VMX: Set failure code in prepare_vmcs02()
KVM: ensure APICv is considered inactive if there is no APIC
KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register
|
|
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.
The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.
The new error codes are documented in the lasest update to the GHCB
specification.
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available. The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.
Fixes: 8f423a80d299 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull xfs fix from Darrick Wong:
"Remove an unnecessary (and backwards) rename flags check that
duplicates a VFS level check"
* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove incorrect ASSERT in xfs_rename
|
|
Pull cifs fixes from Steve French:
"Three SMB3 multichannel/fscache fixes and a DFS fix.
In testing multichannel reconnect scenarios recently various problems
with the cifs.ko implementation of fscache were found (e.g. incorrect
initialization of fscache cookies in some cases)"
* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: avoid use of dstaddr as key for fscache client cookie
cifs: add server conn_id to fscache client cookie
cifs: wait for tcon resource_id before getting fscache super
cifs: fix missed refcounting of ipc tcon
|
|
In commit c8c3735997a3 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour. On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.
This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.
Fixes: c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
|
|
On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
|
|
Pull block fix from Jens Axboe:
"A single fix for repeated printk spam from loop"
* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
loop: Use pr_warn_once() for loop_control_remove() warning
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix preventing repeated retries of task_work based io-wq
thread creation, fixing a regression from when io-wq was made more (a
bit too much) resilient against signals"
* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
io-wq: don't retry task_work creation failure on fatal conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Since commit 486408d690e1 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
- Fix a BUG demoting weak glock holders from a remote node.
* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_create_inode rework
gfs2: gfs2_inode_lookup rework
gfs2: gfs2_inode_lookup cleanup
gfs2: Fix remote demote of weak glock holders
|
|
Commit d81ae8aac85c ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.
The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue
static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
enum uclamp_id clamp_id)
{
...
if (uc_se->value > READ_ONCE(uc_rq->value))
WRITE_ONCE(uc_rq->value, uc_se->value);
}
was actually resetting it. But since commit d81ae8aac85c changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.
This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.
Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.
Fixes: d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
|
|
__setup() callbacks expect 1 for success and 0 for failure. Correct the
usage here to reflect that.
Fixes: 826bfeb37bb4 ("preempt/dynamic: Support dynamic preempt with preempt= boot option")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
|
|
Pull VFIO fixes from Alex Williamson:
- Fix OpRegion pointer arithmetic (Zhenyu Wang)
- Fix comment format triggering kernel-doc warnings (Randy Dunlap)
* tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix OpRegion read
vfio: remove all kernel-doc notation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a CPU hot-add issue in the cpufreq core, fix a comment in
the cpufreq core code and update its documentation, and disable the
DTPM (Dynamic Thermal Power Management) code for the time being to
prevent it from causing issues to appear.
Specifics:
- Disable DTPM for this cycle to prevent it from causing issues to
appear on otherwise functional systems (Daniel Lezcano)
- Fix cpufreq sysfs interface failure related to physical CPU hot-add
(Xiongfeng Wang)
- Fix comment in cpufreq core and update its documentation (Tang
Yizhou)"
* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: DTPM: Drop unused local variable from init_dtpm()
cpufreq: docs: Update core.rst
cpufreq: Fix a comment in cpufreq_policy_free
powercap/drivers/dtpm: Disable DTPM at boot time
cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix potential overlap of pseudo-MMIO addresses with MIO addresses
- Fix stack unwinder test case inline assembly compile error that
happens with LLVM's integrated assembler
- Update defconfigs
* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/pci: move pseudo-MMIO to prevent MIO overlap
s390/test_unwind: use raw opcode instead of invalid instruction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc4.
One of them is just a trivial documentation fix, whereas the other two
address a warning in the kexec code and a crash in ftrace on systems
implementing BTI.
The latter patch has a couple of ugly ifdefs which Mark plans to clean
up separately, but as-is the patch is straightforward for backporting
to stable kernels.
Summary:
- Add missing BTI landing instructions to the ftrace*_caller
trampolines
- Fix kexec() WARN when DEBUG_VIRTUAL is enabled
- Fix PAC documentation by removing stale references to compiler
flags"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
|
