summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-03flow_dissector: fix clamping of BPF flow_keys for non-zero nhoffStanislav Fomichev
Don't allow BPF program to set flow_keys->nhoff to less than initial value. We currently don't read the value afterwards in anything but the tests, but it's still a good practice to return consistent values to the test programs. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-03net/flow_dissector: pass flow_keys->n_proto to BPF programsStanislav Fomichev
This is a preparation for the next commit that would prohibit access to the most fields of __sk_buff from the BPF programs. Instead of requiring BPF flow dissector programs to look into skb, pass all input data in the flow_keys. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-03selftests/bpf: fix vlan handling in flow dissector programStanislav Fomichev
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use flow_keys->n_proto, that we set in parse_eth_proto instead and properly increment nhoff as well. Also, always use skb->protocol and don't look at skb->vlan_present. skb->vlan_present indicates that vlan information is stored out-of-band in skb->vlan_{tci,proto} and vlan header is already pulled from skb. That means, skb->vlan_present == true is not relevant for BPF flow dissector. Add simple test cases with VLAN tagged frames: * single vlan for ipv4 * double vlan for ipv6 Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-03HID: input: add mapping for Assistant keyDmitry Torokhov
According to HUTRR89 usage 0x1cb from the consumer page was assigned to allow launching desktop-aware assistant application, so let's add the mapping. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-04-03mfd: sun6i-prcm: Allow to compile with COMPILE_TESTMaxime Ripard
Since this driver only has a dependency on ARCH_SUNXI just because it doesn't make any sense to run it on something else, we can definitely enable it through COMPILE_TEST as well to get some build coverage. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-02Merge tag 'pidfd-fixes-v5.1-rc3' of ↵Linus Torvalds
gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux Pull pidfd fix from Christian Brauner: "This should be an uncontroversial fix for pidfd_send_signal() by Jann to better align it's behavior with other signal sending functions: In one of the early versions of the patchset it was suggested to not unconditionally error out when a signal with SI_USER is sent to a non-current task (cf. [1]). Instead, pidfd_send_signal() currently silently changes this to a regular kill signal. While this is technically fine, the semantics are weird since the kernel just silently converts a user's request behind their back and also no other signal sending function allows to do this. It gets more hairy when we introduce sending signals to a specific thread soon. So let's align pidfd_send_signal() with all the other signal sending functions and error out when SI_USER signals are sent to a non-current task" * tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: signal: don't silently convert SI_USER signals to non-current pidfd
2019-04-02Merge tag 'hwmon-for-v5.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Couple of minor hwmon fixes" * tag 'hwmon-for-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: dt-bindings: hwmon: (adc128d818) Specify ti,mode property size hwmon: (ntc_thermistor) Fix temperature type reporting hwmon: (occ) Fix power sensor indexing hwmon: (w83773g) Select REGMAP_I2C to fix build error
2019-04-02Update Nicolas Pitre's email addressNicolas Pitre
The @linaro version won't be valid much longer. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-02drm/amdgpu: remove unnecessary rlc reset function on gfx9Le Ma
The rlc reset function is not necessary during gfx9 initialization/resume phase. And this function would even cause rlc fw loading failed on some gfx9 ASIC. Remove this function safely with verification well on Vega/Raven platform. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-02Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Fixes 2019-04-01 This series contains two fixes for XDP in the i40e driver. Björn provides both fixes, first moving a function out of the header and into the main.c file. Second fixes a regression introduced in an earlier patch that removed umem from the VSI. This caused an issue because the setup code would try to enable AF_XDP zero copy unconditionally, as long as there was a umem placed in the netdev receive structure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: sched: don't set tunnel for decap actionVlad Buslov
Action tunnel_key doesn't have a metadata/tunnel for release(decap) action. Drivers do not dereference entry->tunnel pointer for that action type, so this behavior doesn't result in a crash at the moment. However, this needs to be corrected as a preparation for updating hardware offloads API to not rely on rtnl lock, for which flow_action code will copy the tunnel data to temporary buffer to prevent concurrent action overwrite from invalidating/freeing it. Fixes: 3a7b68617de7 ("cls_api: add translator to flow_action representation") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02ip6_tunnel: Match to ARPHRD_TUNNEL6 for dev typeSheena Mira-ato
The device type for ip6 tunnels is set to ARPHRD_TUNNEL6. However, the ip4ip6_err function is expecting the device type of the tunnel to be ARPHRD_TUNNEL. Since the device types do not match, the function exits and the ICMP error packet is not sent to the originating host. Note that the device type for IPv4 tunnels is set to ARPHRD_TUNNEL. Fix is to expect a tunnel device type of ARPHRD_TUNNEL6 instead. Now the tunnel device type matches and the ICMP error packet is sent to the originating host. Signed-off-by: Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02Merge branch 'net-phy-improve-genphy_c45_read_lpa'David S. Miller
Heiner Kallweit says: ==================== net: phy: improve genphy_c45_read_lpa This series improves genphy_c45_read_lpa: - Use clause 45 standard register / bit to detect link partner autoneg capability. - Consider that lpa register values may be invalid if "autoneg complete" bit isn't set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: deal properly with autoneg incomplete in genphy_c45_read_lpaHeiner Kallweit
The link partner advertisement registers are not guaranteed to contain valid values if autoneg is incomplete. Therefore, if MDIO_AN_STAT1_COMPLETE isn't set, let's clear all link partner capability bits. This also avoids unnecessary register reads if link is down and phylib is in polling mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: use c45 standard to detect link partner autoneg capabilityHeiner Kallweit
Currently mii_lpa_mod_linkmode_lpa_t() checks bit LPA_LPACK to detect whether link partner supports autoneg. This doesn't work correctly at least on Aquantia AQCS109 when it negotiates 1000Base-T2 mode. The "link partner is autoneg-capable" bit as defined by clause 45 is set however. Better let's switch in general to use the clause 45 standard for link partner autoneg detection. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02Merge branch 'genphy_read_abilities'David S. Miller
Heiner Kallweit says: ==================== net: phy: add and use new function genphy_read_abilities Similar to genphy_c45_pma_read_abilities() add a function to dynamically detect the abilities of a Clause 22 PHY. This is mainly copied from genphy_config_init(). Main benefit is that PHY drivers no longer have to specify whether they support GBit or not (provided they keep to the C22 standard). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: realtek: use genphy_read_abilitiesHeiner Kallweit
Use new function genphy_read_abilities(). This allows to remove all calls to genphy_config_init(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: use genphy_read_abilities in genphy driverHeiner Kallweit
Currently the genphy driver populates phydev->supported like this: First all possible feature bits are set, then genphy_config_init() reads the available features from the chip and remove all unsupported features from phydev->supported. This can be simplified by using genphy_read_abilities(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: add genphy_read_abilitiesHeiner Kallweit
Similar to genphy_c45_pma_read_abilities() add a function to dynamically detect the abilities of a Clause 22 PHY. This is mainly copied from genphy_config_init(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02openvswitch: use after free in __ovs_ct_free_action()Dan Carpenter
We free "ct_info->ct" and then use it on the next line when we pass it to nf_ct_destroy_timeout(). This patch swaps the order to avoid the use after free. Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02tg3: allow ethtool -p to work for NICs in down stateJon Maxwell
Make tg3 behave like other drivers and let "ethtool -p" identify the NIC even when it's in the DOWN state. Before this patch it would get an error as follows if the NIC was down: # ip link set down dev em4 # ethtool -p em4 Cannot identify NIC: Resource temporarily unavailable With this patch ethtool identify works regardless of whether the NIC is up or down as it does for other drivers. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02mfd: sc27xx: Use SoC compatible string for PMIC devicesBaolin Wang
We should use SoC compatible string in stead of wildcard string for PMIC child devices. Fixes: 0419a75b1808 (arm64: dts: sprd: Remove wildcard compatible string) Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-02mfd: twl-core: Disable IRQ while suspendedAndreas Kemnade
Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get() in i2c-omap.c returns -EACCES. [ 86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 86.485473] printk: Suspending console(s) (use no_console_suspend to debug) [ 86.555572] Disabling non-boot CPUs ... [ 86.555664] Successfully put all powerdomains to target state [ 86.563720] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563751] twl4030: I2C error -13 reading PIH ISR [ 86.563812] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563812] twl4030: I2C error -13 reading PIH ISR [ 86.563873] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563903] twl4030: I2C error -13 reading PIH ISR This happens when we wakeup via something behing twl4030 (powerbutton or rtc alarm). This goes on for minutes until the system is finally resumed. Disable the irq on suspend and enable it on resume to avoid having i2c access problems when the irq registers are checked. Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-01macsec: add noinline tag to avoid a frame size warningFlorian Westphal
seen with debug config: drivers/net/macsec.c: In function 'dump_secy': drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger than 2048 bytes [-Wframe-larger-than=] just mark it with noinline_for_stack, this is netlink dump code. v2: use 'static noinline_for_stack int' consistently Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01Merge branch 'xmit_more-softnet_data'David S. Miller
Florian Westphal says: ==================== net: move skb->xmit_more to percpu softnet data Eric Dumazet mentioned we could place xmit_more hint in same spot as device xmit recursion counter, instead of using an sk_buff flag bit. This series places xmit_recursion counter and xmit_more hint in softnet data, filling a hole. After this, skb->xmit_more is always zero. Drivers are converted to use "netdev_xmit_more()" helper instead. Last patch removes the skb->xmit_more flag. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01drivers: net: aurora: use netdev_xmit_more helperFlorian Westphal
This is the last driver using always-0 skb->xmit_more. Switch it to netdev_xmit_more and remove the now unused xmit_more flag from sk_buff. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01drivers: net: sfc: use netdev_xmit_more helperFlorian Westphal
skb->xmit_more hint is now always 0, this switches the sfc driver to use the netdev_xmit_more helper instead. Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01drivers: mellanox: use netdev_xmit_more() helperFlorian Westphal
skb->xmit_more hint is now always 0. This switches the mellanox drivers to the netdev_xmit_more() helper. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Boris Pismenny <borisp@mellanox.com> Cc: Ilya Lesokhin <ilyal@mellanox.com> Cc: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: move skb->xmit_more hint to softnet dataFlorian Westphal
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: place xmit recursion in softnet dataFlorian Westphal
This fills a hole in softnet data, so no change in structure size. Also prepares for xmit_more placement in the same spot; skb->xmit_more will be removed in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01dccp: Fix memleak in __feat_register_spYueHaibing
If dccp_feat_push_change fails, we forget free the mem which is alloced by kmemdup in dccp_feat_clone_sp_val. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e8ef967a54f4 ("dccp: Registration routines for changing feature values") Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: phy: aquantia: add SGMII statisticsHeiner Kallweit
The AQR107 family has SGMII statistics counters. Let's expose them to ethtool. To interpret the counters correctly one has to be aware that rx on SGMII side is tx on ethernet side. The counters are populated by the chip in 100Mbps/1Gbps mode only. v2: - add constant AQR107_SGMII_STAT_SZ - add struct aqr107_priv to be prepared for more private data fields - let aqr107_get_stat() return U64_MAX in case of an error Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: use rcu_dereference_protected to fetch sk_dst_cache in sk_destructXin Long
As Eric noticed, in .sk_destruct, sk->sk_dst_cache update is prevented, and no barrier is needed for this. So change to use rcu_dereference_protected() instead of rcu_dereference_check() to fetch sk_dst_cache in there. v1->v2: - no change, repost after net-next is open. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01sctp: initialize _pad of sockaddr_in before copying to user memoryXin Long
Syzbot report a kernel-infoleak: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 Call Trace: _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline] sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562 ... Uninit was stored to memory at: sctp_transport_init net/sctp/transport.c:61 [inline] sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115 sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637 sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline] sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361 ... Bytes 8-15 of 16 are uninitialized It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in struct sockaddr_in) wasn't initialized, but directly copied to user memory in sctp_getsockopt_peer_addrs(). So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as sctp_v6_addr_to_user() does. Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Tested-by: Alexander Potapenko <glider@google.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: phy: improve genphy_read_statusHeiner Kallweit
This patch improves few aspects of genphy_read_status(): - Don't initialize lpagb, it's not needed. - Move initializing phydev->speed et al before the if clause. - In auto-neg case, skip populating lp_advertising if we don't have a link. This avoids quite some unnecessary MDIO reads in case of phylib polling mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01Merge branch 'nfp-flower-improvement-and-SFF-module-EEPROM'David S. Miller
Jakub Kicinski says: ==================== nfp: flower improvement and SFF module EEPROM The first patch in this series from Pieter improves the handling of mangle actions in TC flower offload. These used to be sent down to the driver in groups, but after Pablo N's patches they are split out causing suboptimal expression. The ramaining two patches from Dirk add support for reading SFF module EEPROM data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: implement ethtool get module EEPROMDirk van der Merwe
Now that the NSP provides the ability to read from the SFF modules' EEPROM, we can use this interface to implement the ethtool callback. If the NSP only provides partial data, we log the event from within the driver but pass a success code to ethtool to prevent it from discarding the partial data. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: nsp: implement read SFF module EEPROMDirk van der Merwe
The NSP now provides the ability to read from the SFF module EEPROM. Note that even if an error occurs, the NSP may still provide some of the data. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: flower: reduce action list size by coalescing mangle actionsPieter Jansen van Vuuren
With the introduction of flow_action_for_each pedit actions are no longer grouped together, instead pedit actions are broken out per 32 byte word. This results in an inefficient use of the action list that is pushed to hardware where each 32 byte word becomes its own action. Therefore we combine groups of 32 byte word before sending the action list to hardware. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01Merge branch 'nfp-flower-fix-matching-and-pushing-vlan-CFI-bit'David S. Miller
Jakub Kicinski says: ==================== nfp: flower: fix matching and pushing vlan CFI bit This patch clears up some confusion around the meaning of bit 12 for FW messages related to VLAN and flower offload. Pieter says: It fixes issues with matching, pushing and popping vlan tags. We replace the vlan CFI bit with a vlan present bit that indicates the presence of a vlan tag. We also no longer set the CFI when pushing vlan tags. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: flower: remove vlan CFI bit from push vlan actionPieter Jansen van Vuuren
We no longer set CFI when pushing vlan tags, therefore we remove the CFI bit from push vlan. Fixes: 1a1e586f54bf ("nfp: add basic action capabilities to flower offloads") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: flower: replace CFI with vlan presentPieter Jansen van Vuuren
Replace vlan CFI bit with a vlan present bit that indicates the presence of a vlan tag. Previously the driver incorrectly assumed that an vlan id of 0 is not matchable, therefore we indicate vlan presence with a vlan present bit. Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: phy: aquantia: add suspend / resume callbacks for AQR107 familyHeiner Kallweit
Add suspend / resume callbacks for AQR107 family. Suspend powers down the complete chip except MDIO and internal CPU. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: ethernet: ti: davinci_mdio: switch to readl/writel()Grygorii Strashko
Switch to readl/writel() APIs, because this is recommended API and the MDIO block is reused on Keystone 2 SoCs where LE/BE modes are supported. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01Merge branch 'cxgb3-undefined-behaviour-and-use-struct_size'David S. Miller
Gustavo A. R. Silva says: ==================== cxgb3/l2t: Fix undefined behaviour and use struct_size() helper This patchset aims to fix an undefined behaviour when using a zero-sized array and, add the use of the struct_size() helper in kvzalloc(). You might consider the first patch in this series for stable. More details in the commit logs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01cxgb3/l2t: Use struct_size() in kvzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kvzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01cxgb3/l2t: Fix undefined behaviourGustavo A. R. Silva
The use of zero-sized array causes undefined behaviour when it is not the last member in a structure. As it happens to be in this case. Also, the current code makes use of a language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as this one is a flexible array member, introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last. Which is beneficial to cultivate a high-quality code. Fixes: e48f129c2f20 ("[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01kcm: switch order of device registration to fix a crashJiri Slaby
When kcm is loaded while many processes try to create a KCM socket, a crash occurs: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e IP: mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 PGD 8000000016ef2067 P4D 8000000016ef2067 PUD 3d6e9067 PMD 0 Oops: 0002 [#1] SMP KASAN PTI CPU: 0 PID: 7005 Comm: syz-executor.5 Not tainted 4.12.14-396-default #1 SLE15-SP1 (unreleased) RIP: 0010:mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 RSP: 0018:ffff88000d487a00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 000000000000000e RCX: 1ffff100082b0719 ... CR2: 000000000000000e CR3: 000000004b1bc003 CR4: 0000000000060ef0 Call Trace: kcm_create+0x600/0xbf0 [kcm] __sock_create+0x324/0x750 net/socket.c:1272 ... This is due to race between sock_create and unfinished register_pernet_device. kcm_create tries to do "net_generic(net, kcm_net_id)". but kcm_net_id is not initialized yet. So switch the order of the two to close the race. This can be reproduced with mutiple processes doing socket(PF_KCM, ...) and one process doing module removal. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: dsa: read mac address from DT for slave deviceXiaofei Shen
Before creating a slave netdevice, get the mac address from DTS and apply in case it is valid. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01Merge branch 'net-sched-fix-stats-accounting-for-child-NOLOCK-qdiscs'David S. Miller
Paolo Abeni says: ==================== net: sched: fix stats accounting for child NOLOCK qdiscs Currently, stats accounting for NOLOCK qdisc enslaved to classful (lock) qdiscs is buggy. Per CPU values are ignored in most places, as a result, stats dump in the above scenario always report 0 length backlog and parent backlog len is not updated correctly on NOLOCK qdisc removal. The first patch address stats dumping, and the second one child qdisc removal. I'm targeting the net tree as this is a bugfix, but it could be moved to net-next due to the relatively large diffstat. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 18:52:37 +0000