| Age | Commit message (Collapse) | Author |
|---|
|
Export the module device table to ensure the VIC compatible strings are
listed in the module's aliases table. This in turn causes the driver to
be automatically loaded on boot if VIC is the only enabled subdevice of
the logical host1x DRM device.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Upon system suspend, make sure the +5V HDMI regulator is disabled. This
avoids potentially leaking current to the HDMI connector. This also
makes sure that upon resume the regulator is enabled again, which in
some cases is necessary to properly restore the state of the supply on
resume.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The IOVA address for the cursor is the result of mapping the buffer
object for the given display controller. Make sure to use the proper
IOVA address as stored in the cursor's plane state.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
All the display related blocks on Tegra require contiguous memory. Using
the DMA API, there is no knowing at import time which device will end up
using the buffer, so it's not known whether or not an IOMMU will be used
to map the buffer.
Move the check for non-contiguous buffers/mappings to the tegra_dc_pin()
function which is now the earliest point where it is known if a DMA BUF
can be used by the given device or not.
v2: add check for contiguous buffer/mapping in tegra_dc_pin()
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Buffers that are imported from a DMA-BUF don't have pages allocated with
them. At the same time an SG table for them can't be derived using the
DMA API helpers because the necessary information doesn't exist. However
there's already an SG table that was created during import, so this can
simply be duplicated.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra DRM never actually took that lock, so the driver was broken
until generic locking was added in commit:
commit b962a12050a387e4bbf3a48745afe1d29d396b0d
Author: Rob Clark <robdclark@gmail.com>
Date: Mon Oct 22 14:31:22 2018 +0200
drm/atomic: integrate modeset lock with private objects
It's now no longer necessary to take that lock, so drop the check.
v2: add rationale for why it is now safe to drop the check (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
UXN is the only individual PTE bit other than the PTE_ATTRINDX_MASK ones
which doesn't have both a set and a clear value provided, meaning that the
columns in the table won't all be aligned. The PTE_ATTRINDX_MASK values
are all both mutually exclusive and longer so are listed last to make a
single final column for those values. Ensure everything is aligned by
providing a clear value for UXN.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
A kernel built with KASAN && FTRACE_WITH_REGS && !MODULES, produces a
boot-time splat in the bowels of ftrace:
| [ 0.000000] ftrace: allocating 32281 entries in 127 pages
| [ 0.000000] ------------[ cut here ]------------
| [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2019 ftrace_bug+0x27c/0x328
| [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc3-00008-g7f08ae53a7e3 #13
| [ 0.000000] Hardware name: linux,dummy-virt (DT)
| [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
| [ 0.000000] pc : ftrace_bug+0x27c/0x328
| [ 0.000000] lr : ftrace_init+0x640/0x6cc
| [ 0.000000] sp : ffffa000120e7e00
| [ 0.000000] x29: ffffa000120e7e00 x28: ffff00006ac01b10
| [ 0.000000] x27: ffff00006ac898c0 x26: dfffa00000000000
| [ 0.000000] x25: ffffa000120ef290 x24: ffffa0001216df40
| [ 0.000000] x23: 000000000000018d x22: ffffa0001244c700
| [ 0.000000] x21: ffffa00011bf393c x20: ffff00006ac898c0
| [ 0.000000] x19: 00000000ffffffff x18: 0000000000001584
| [ 0.000000] x17: 0000000000001540 x16: 0000000000000007
| [ 0.000000] x15: 0000000000000000 x14: ffffa00010432770
| [ 0.000000] x13: ffff940002483519 x12: 1ffff40002483518
| [ 0.000000] x11: 1ffff40002483518 x10: ffff940002483518
| [ 0.000000] x9 : dfffa00000000000 x8 : 0000000000000001
| [ 0.000000] x7 : ffff940002483519 x6 : ffffa0001241a8c0
| [ 0.000000] x5 : ffff940002483519 x4 : ffff940002483519
| [ 0.000000] x3 : ffffa00011780870 x2 : 0000000000000001
| [ 0.000000] x1 : 1fffe0000d591318 x0 : 0000000000000000
| [ 0.000000] Call trace:
| [ 0.000000] ftrace_bug+0x27c/0x328
| [ 0.000000] ftrace_init+0x640/0x6cc
| [ 0.000000] start_kernel+0x27c/0x654
| [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x30/0x60 with crng_init=0
| [ 0.000000] ---[ end trace 0000000000000000 ]---
| [ 0.000000] ftrace faulted on writing
| [ 0.000000] [<ffffa00011bf393c>] _GLOBAL__sub_D_65535_0___tracepoint_initcall_level+0x4/0x28
| [ 0.000000] Initializing ftrace call sites
| [ 0.000000] ftrace record flags: 0
| [ 0.000000] (0)
| [ 0.000000] expected tramp: ffffa000100b3344
This is due to an unfortunate combination of several factors.
Building with KASAN results in the compiler generating anonymous
functions to register/unregister global variables against the shadow
memory. These functions are placed in .text.startup/.text.exit, and
given mangled names like _GLOBAL__sub_{I,D}_65535_0_$OTHER_SYMBOL. The
kernel linker script places these in .init.text and .exit.text
respectively, which are both discarded at runtime as part of initmem.
Building with FTRACE_WITH_REGS uses -fpatchable-function-entry=2, which
also instruments KASAN's anonymous functions. When these are discarded
with the rest of initmem, ftrace removes dangling references to these
call sites.
Building without MODULES implicitly disables STRICT_MODULE_RWX, and
causes arm64's patch_map() function to treat any !core_kernel_text()
symbol as something that can be modified in-place. As core_kernel_text()
is only true for .text and .init.text, with the latter depending on
system_state < SYSTEM_RUNNING, we'll treat .exit.text as something that
can be patched in-place. However, .exit.text is mapped read-only.
Hence in this configuration the ftrace init code blows up while trying
to patch one of the functions generated by KASAN.
We could try to filter out the call sites in .exit.text rather than
initializing them, but this would be inconsistent with how we handle
.init.text, and requires hooking into core bits of ftrace. The behaviour
of patch_map() is also inconsistent today, so instead let's clean that
up and have it consistently handle .exit.text.
This patch teaches patch_map() to handle .exit.text at init time,
preventing the boot-time splat above. The flow of patch_map() is
reworked to make the logic clearer and minimize redundant
conditionality.
Fixes: 3b23e4991fb66f6d ("arm64: implement ftrace with regs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
John reports that the recently merged commit 1a8e1cef7603 ("arm64: use
both ZONE_DMA and ZONE_DMA32") breaks the boot on his DB845C board:
| Booting Linux on physical CPU 0x0000000000 [0x517f803c]
| Linux version 5.4.0-mainline-10675-g957a03b9e38f
| Machine model: Thundercomm Dragonboard 845c
| [...]
| Built 1 zonelists, mobility grouping on. Total pages: -188245
| Kernel command line: earlycon
| firmware_class.path=/vendor/firmware/ androidboot.hardware=db845c
| init=/init androidboot.boot_devices=soc/1d84000.ufshc
| printk.devkmsg=on buildvariant=userdebug root=/dev/sda2
| androidboot.bootdevice=1d84000.ufshc androidboot.serialno=c4e1189c
| androidboot.baseband=sda
| msm_drm.dsi_display0=dsi_lt9611_1080_video_display:
| androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init
|
| <hangs indefinitely here>
This is because, when CONFIG_NUMA=n, zone_sizes_init() fails to handle
memblocks that fall entirely within the ZONE_DMA region and erroneously ends up
trying to add a negatively-sized region into the following ZONE_DMA32, which is
later interpreted as a large unsigned region by the core MM code.
Rework the non-NUMA implementation of zone_sizes_init() so that the start
address of the memblock being processed is adjusted according to the end of the
previous zone, which is then range-checked before updating the hole information
of subsequent zones.
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/lkml/CALAqxLVVcsmFrDKLRGRq7GewcW405yTOxG=KR3csVzQ6bXutkA@mail.gmail.com
Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We will never need more guest_msrs than there are indices in
vmx_msr_index. Thus, at present, the guest_msrs array will not exceed
168 bytes.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The bounds check was present in KVM_GET_SUPPORTED_CPUID but not
KVM_GET_EMULATED_CPUID.
Reported-by: syzbot+e3f4897236c4eeb8af4f@syzkaller.appspotmail.com
Fixes: 84cffe499b94 ("kvm: Emulate MOVBE", 2013-10-29)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a module_exit() to perform the necessary clean-up.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
To prevent a PV driver module being removed whilst attached to its other
end, and hence xenbus calling into potentially invalid text, take a
reference on the module before calling the probe() method (dropping it if
unsuccessful) and drop the reference after returning from the remove()
method.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The recent commit 81d2c6f81996 ("kasan: support instrumented bitops
combined with generic bitops"), split the KASAN instrumented bitops
into separate headers for atomic, non-atomic and locking operations.
This was done to allow arches to include just the instrumented bitops
they need, while also using some of the generic bitops in
asm-generic/bitops (which are automatically instrumented). The generic
bitops are already split into atomic, non-atomic and locking headers.
This split required an update to kernel-api.rst because it included
include/asm-generic/bitops-instrumented.h, which no longer exists. So
now kernel-api.rst includes all three instrumented headers to get the
definitions for all the bitops.
When adding the three headers it seemed sensible to add sub-headings
for each, ie. "Atomic", "Non-atomic" and "Locking".
The confusion is that test_bit() is (and always has been) in
non-atomic.h, but is documented elsewhere (atomic_bitops.txt) as being
atomic. So having it appear under the "Non-atomic" heading is possibly
confusing.
Probably test_bit() should move from bitops/non-atomic.h to atomic.h,
but that has flow on effects. For now just remove the newly added
sub-headings in the documentation, so we at least aren't adding to the
confusion about whether test_bit() is atomic or not.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
* acpi-bus:
ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()
* acpi-button:
ACPI: button: Add DMI quirk for Acer Switch 10 SW5-032 lid-switch
* acpi-sysfs:
ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100
* acpi-misc:
ACPI: Fix Kconfig indentation
|
|
* pm-sleep:
ACPI: PM: s2idle: Rework ACPI events synchronization
ACPI: EC: Rework flushing of pending work
* pm-cpuidle:
cpuidle: minor Kconfig help text fixes
cpuidle: Drop disabled field from struct cpuidle_state
cpuidle: Fix Kconfig indentation
* pm-cpufreq:
cpufreq: Fix Kconfig indentation
* pm-devfreq:
PM / devfreq: Add missing locking while setting suspend_freq
* pm-avs:
power: avs: Fix Kconfig indentation
|
|
It's dangerous to use empty code define.
Furthermore it lead to the following warning:
drivers/char/agp/generic.c: In function « agp_generic_destroy_page »:
drivers/char/agp/generic.c:1266:28: attention : suggest braces around empty body in an « if » statement [-Wempty-body]
So let's replace emptyness by "do {} while(0)"
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1574324085-4338-6-git-send-email-clabbe@baylibre.com
|
|
This patch add documentation about the bridge parameter in several
function.
This will fix the following build warning:
drivers/char/agp/generic.c:220: warning: No description found for parameter 'bridge'
drivers/char/agp/generic.c:364: warning: No description found for parameter 'bridge'
drivers/char/agp/generic.c:1283: warning: No description found for parameter 'bridge'
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1574324085-4338-5-git-send-email-clabbe@baylibre.com
|
|
This patch fix the following build warning:
warning: variable 'num_segments' set but not used [-Wunused-but-set-variable]
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1574324085-4338-4-git-send-email-clabbe@baylibre.com
|
|
This patch move the define for AGPGART_MINOR to include/linux/miscdevice.h.
It is better that all minor number definitions are in the same place.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1574324085-4338-3-git-send-email-clabbe@baylibre.com
|
|
This patch fix the following warning:
drivers/char/agp/generic.c:853:6: attention : variable ‘size’ set but not used [-Wunused-but-set-variable]
by removing the unused variable size in agp_generic_create_gatt_table
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1574324085-4338-2-git-send-email-clabbe@baylibre.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.5-2019-12-03:
amdgpu:
- Fix vram lost handling with BACO on VI/CI asics
- DC fixes for Navi14
- Misc gfx10 fixes
- SR-IOV fixes
- Fix driver unload
- Fix XGMI limits on Arcturus
amdkfd:
- Enable KFD on PPC
- Optimize KFD page table reservations
radeon:
- Fix register checker for r1xx/r2xx
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203204135.5437-1-alexander.deucher@amd.com
|
|
syzbot (via KASAN) reports a use-after-free in the error path of
xlog_alloc_log(). Specifically, the iclog freeing loop doesn't
handle the case of a fully initialized ->l_iclog linked list.
Instead, it assumes that the list is partially constructed and NULL
terminated.
This bug manifested because there was no possible error scenario
after iclog list setup when the original code was added. Subsequent
code and associated error conditions were added some time later,
while the original error handling code was never updated. Fix up the
error loop to terminate either on a NULL iclog or reaching the end
of the list.
Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform changes from Benson Leung:
"CrOS EC / MFD / IIO:
- Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part
of a series from Gwendal to refactor sensor code between MFD, CrOS
EC, iio and input in order to add a new sensorhub driver and FIFO
processing
Wilco EC:
- Add support for Dell's USB PowerShare policy control, keyboard
backlight LED driver, and a new test_event file.
- Fixes use after free in wilco_ec's telemetry driver.
Misc:
- bugfix in cros_usbpd_logger (missing destroy workqueue)"
* tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: wilco_ec: fix use after free issue
platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhub
Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
Revert "Input: cros_ec_keyb - add back missing mask for event_type"
platform/chrome: cros_ec: handle MKBP more events flag
platform/chrome: cros_ec: Do not attempt to register a non-positive IRQ number
platform/chrome: cros-ec: Record event timestamp in the hard irq
mfd / platform / iio: cros_ec: Register sensor through sensorhub
iio / platform: cros_ec: Add cros-ec-sensorhub driver
mfd / platform: cros_ec: Add sensor_count and make check_features public
platform/chrome: cros_ec: Put docs with the code
platform/chrome: cros_usbpd_logger: add missed destroy_workqueue in remove
platform/chrome: cros_ec: Fix Kconfig indentation
platform/chrome: wilco_ec: Add keyboard backlight LED support
platform/chrome: wilco_ec: Add charging config driver
platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control
platform/chrome: wilco_ec: Add debugfs test_event file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fix from Greg KH:
"Here is a single SPDX fixup for 5.5-rc1
It resolves an issue where we had missed a few .h files with the
auto-tagging scripts because they had "GPL" text in strings within the
file themselves. This single patch fixes up the issue and provides the
proper SPDX tags at the top of them as needed.
This patch has been in linux-next for many many weeks now with no
reported issues"
* tag 'spdx-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
export,module: add SPDX GPL-2.0 license identifier to headers with no license
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the "big" tty and serial driver patches for 5.5-rc1.
It's a bit later in the merge window than normal as I wanted to make
sure some last-minute patches applied to it were all sane. They seem
to be :)
There's a lot of little stuff in here, for the tty core, and for lots
of serial drivers:
- reverts of uartlite serial driver patches that were wrong
- msm-serial driver fixes
- serial core updates and fixes
- tty core fixes
- serial driver dma mapping api changes
- lots of other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
vcs: prevent write access to vcsu devices
tty: vt: keyboard: reject invalid keycodes
tty: don't crash in tty_init_dev when missing tty_port
serial: stm32: fix clearing interrupt error flags
tty: Fix Kconfig indentation, continued
serial: serial_core: Perform NULL checks for break_ctl ops
tty: remove unused argument from tty_open_by_driver()
tty: Fix Kconfig indentation
{tty: serial, nand: onenand}: samsung: rename to fix build warning
serial: ifx6x60: add missed pm_runtime_disable
serial: pl011: Fix DMA ->flush_buffer()
Revert "serial-uartlite: Move the uart register"
Revert "serial-uartlite: Add get serial id if not provided"
Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
Revert "serial-uartlite: Add runtime support"
Revert "serial-uartlite: Change logic how console_port is setup"
Revert "serial-uartlite: Use allocated structure instead of static ones"
tty: serial: msm_serial: Use dma_request_chan() directly for channel request
tty: serial: tegra: Use dma_request_chan() directly for channel request
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
|
|
Since timestamps on files on most servers can be updated at
close, and since timestamps on our dentries default to one
second we can have stale timestamps in some common cases
(e.g. open, write, close, stat, wait one second, stat - will
show different mtime for the first and second stat).
The SMB2/SMB3 protocol allows querying timestamps at close
so add the code to request timestamp and attr information
(which is cheap for the server to provide) to be returned
when a file is closed (it is not needed for the many
paths that call SMB2_close that are from compounded
query infos and close nor is it needed for some of
the cases where a directory close immediately follows a
directory open.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A lot of unnecessary code removal in here that ends up decreasing the
number of lines in the subsystem. The ds1343 and ds1347 drivers got
cleaned up. The rest are the usual fixes and new features.
Subsystem:
- fix warnings and errors with make W=1
- UIE are now disabled while setting the RTC time
- UIE are now disallowed when the RTC time is not set.
Drivers:
- remove unecessary .remove callbacks
- Set RTC range for cros-ec, ds1343, ds1347, m41t80, s35390a, vt8500
- Use devm_platform_ioremap_resource where applicable
- rv3028: add clock out support"
* tag 'rtc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
rtc: Fix Kconfig indentation
rtc: xgene: Remove unused struct device in struct xgene_rtc_dev
rtc: sun6i: Remove struct device from sun6i_rtc_dev
rtc: st-lpc: Remove struct resource from struct st_rtc
rtc: pcf8523: Remove struct pcf8523
rtc: meson: remove redundant assignment to variable retries
rtc: v3020: remove set but unused variable
rtc: tegra: remove set but unused variable
rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtc
rtc: m41t80: remove excess kerneldoc
rtc: ds1685: fix build error with make W=1
rtc: ds1685: remove set but unused variables
rtc: ds1374: remove unused variable
rtc: sysfs: fix hctosys_show kerneldoc
rtc: interface: fix kerneldoc comments
rtc: msm6242: Remove unneeded msm6242_set()/msm6242_clear() functions
rtc: msm6242: Fix reading of 10-hour digit
rtc: tps65910: allow using RTC without alarm interrupt
rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig
rtc: pcf8563: Constify clkout_rates
...
|
|
On systems with STACKTRACE_SUPPORT=n, we get:
WARNING: unmet direct dependencies detected for STACKTRACE
Depends on [n]: STACKTRACE_SUPPORT
Selected by [y]:
- STACKDEPOT [=y]
and build errors such as:
m68k-linux-ld: kernel/stacktrace.o: in function `stack_trace_save':
(.text+0x11c): undefined reference to `save_stack_trace'
Add the missing deendency on STACKTRACE_SUPPORT.
Fixes: 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202133650.11964-1-linux@roeck-us.net
|
|
Pull iomap cleanups from Darrick Wong:
"Aome more new iomap code for 5.5.
There's not much this time -- just removing some local variables that
don't need to exist in the iomap directio code"
* tag 'iomap-5.5-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: remove unneeded variable in iomap_dio_rw()
iomap: Do not create fake iter in iomap_dio_bio_actor()
|
|
For each I/O request, blkback first maps the foreign pages for the
request to its local pages. If an allocation of a local page for the
mapping fails, it should unmap every mapping already made for the
request.
However, blkback's handling mechanism for the allocation failure does
not mark the remaining foreign pages as unmapped. Therefore, the unmap
function merely tries to unmap every valid grant page for the request,
including the pages not mapped due to the allocation failure. On a
system that fails the allocation frequently, this problem leads to
following kernel crash.
[ 372.012538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
[ 372.012546] IP: [<ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40
[ 372.012557] PGD 16f3e9067 PUD 16426e067 PMD 0
[ 372.012562] Oops: 0002 [#1] SMP
[ 372.012566] Modules linked in: act_police sch_ingress cls_u32
...
[ 372.012746] Call Trace:
[ 372.012752] [<ffffffff81407204>] gnttab_unmap_refs+0x34/0x40
[ 372.012759] [<ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback]
...
[ 372.012802] [<ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback]
...
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
This commit fixes this problem by marking the grant pages of the given
request that didn't mapped due to the allocation failure as invalid.
Fixes: c6cc142dac52 ("xen-blkback: use balloon pages for all mappings")
Reviewed-by: David Woodhouse <dwmw@amazon.de>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Paul Durrant <pdurrant@amazon.co.uk>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features:
- increase left match history buffer size to provide improved
conflict resolution in overlapping execution rules.
- switch buffer allocation to use a memory pool and GFP_KERNEL where
possible.
- add compression of policy blobs to reduce memory usage.
Cleanups:
- fix spelling mistake "immutible" -> "immutable"
Bug fixes:
- fix unsigned len comparison in update_for_len macro
- fix sparse warning for type-casting of current->real_cred"
* tag 'apparmor-pr-2019-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: make it so work buffers can be allocated from atomic context
apparmor: reduce rcu_read_lock scope for aa_file_perm mediation
apparmor: fix wrong buffer allocation in aa_new_mount
apparmor: fix unsigned len comparison with less than zero
apparmor: increase left match history buffer size
apparmor: Switch to GFP_KERNEL where possible
apparmor: Use a memory pool instead per-CPU caches
apparmor: Force type-casting of current->real_cred
apparmor: fix spelling mistake "immutible" -> "immutable"
apparmor: fix blob compression when ns is forced on a policy load
apparmor: fix missing ZLIB defines
apparmor: fix blob compression build failure on ppc
apparmor: Initial implementation of raw policy blob compression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Make stack unwinder reliable and suitable for livepatching. Add
unwinder testing module.
- Fixes for CALL_ON_STACK helper used for stack switching.
- Fix unwinding from bpf code.
- Fix getcpu and remove compat support in vdso code.
- Fix address space control registers initialization.
- Save KASLR offset for early dumps.
- Handle new FILTERED_BY_HYPERVISOR reply code in crypto code.
- Minor perf code cleanup and potential memory leak fix.
- Add couple of error messages for corner cases during PCI device
creation.
* tag 's390-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (33 commits)
s390: remove compat vdso code
s390/livepatch: Implement reliable stack tracing for the consistency model
s390/unwind: add stack pointer alignment sanity checks
s390/unwind: filter out unreliable bogus %r14
s390/unwind: start unwinding from reliable state
s390/test_unwind: add program check context tests
s390/test_unwind: add irq context tests
s390/test_unwind: print verbose unwinding results
s390/test_unwind: add CALL_ON_STACK tests
s390: fix register clobbering in CALL_ON_STACK
s390/test_unwind: require that unwinding ended successfully
s390/unwind: add a test for the internal API
s390/unwind: always inline get_stack_pointer
s390/pci: add error message on device number limit
s390/pci: add error message for UID collision
s390/cpum_sf: Check for SDBT and SDB consistency
s390/cpum_sf: Use TEAR_REG macro consistantly
s390/cpum_sf: Remove unnecessary check for pending SDBs
s390/cpum_sf: Replace function name in debug statements
s390/kaslr: store KASLR offset for early dumps
...
|
|
Pull Xtensa updates from Max Filippov:
- add support for execute in place (XIP) kernels
- improvements in inline assembly: use named arguments and "m"
constraints where possible
- improve stack dumping
- clean up system_call code and syscall tracing
- various small fixes and cleanups
* tag 'xtensa-20191201' of git://github.com/jcmvbkbc/linux-xtensa: (30 commits)
xtensa: clean up system_call/xtensa_rt_sigreturn interaction
xtensa: fix system_call interaction with ptrace
xtensa: rearrange syscall tracing
xtensa: fix syscall_set_return_value
xtensa: drop unneeded headers from coprocessor.S
xtensa: entry: Remove unneeded need_resched() loop
xtensa: use MEMBLOCK_ALLOC_ANYWHERE for KASAN shadow map
xtensa: fix TLB sanity checker
xtensa: get rid of __ARCH_USE_5LEVEL_HACK
xtensa: mm: fix PMD folding implementation
xtensa: make stack dump size configurable
xtensa: improve stack dumping
xtensa: use "m" constraint instead of "r" in futex.h assembly
xtensa: use "m" constraint instead of "a" in cmpxchg.h assembly
xtensa: use named assembly arguments in cmpxchg.h
xtensa: use "m" constraint instead of "a" in atomic.h assembly
xtensa: use named assembly arguments in atomic.h
xtensa: use "m" constraint instead of "a" in bitops.h assembly
xtensa: use named assembly arguments in bitops.h
xtensa: use macros to generate *_bit and test_and_*_bit functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Ingo Molnar:
"The main changes in the timer code in this cycle were:
- Clockevent updates:
- timer-of framework cleanups. (Geert Uytterhoeven)
- Use timer-of for the renesas-ostm and the device name to prevent
name collision in case of multiple timers. (Geert Uytterhoeven)
- Check if there is an error after calling of_clk_get in asm9260
(Chuhong Yuan)
- ABI fix: Zero out high order bits of nanoseconds on compat
syscalls. This got broken a year ago, with apparently no side
effects so far.
Since the kernel would use random data otherwise I don't think we'd
have other options but to fix the bug, even if there was a side
effect to applications (Dmitry Safonov)
- Optimize ns_to_timespec64() on 32-bit systems: move away from
div_s64_rem() which can be slow, to div_u64_rem() which is faster
(Arnd Bergmann)
- Annotate KCSAN-reported false positive data races in
hrtimer_is_queued() users by moving timer->state handling over to
the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses
(Eric Dumazet)
- Misc cleanups and small fixes"
[ I undid the "ABI fix" and updated the comments instead. The reason
there were apparently no side effects is that the fix was a no-op.
The updated comment is to say _why_ it was a no-op. - Linus ]
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Zero the upper 32-bits in __kernel_timespec on 32-bit
time: Rename tsk->real_start_time to ->start_boottime
hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
time: Fix spelling mistake in comment
time: Optimize ns_to_timespec64()
hrtimer: Annotate lockless access to timer->state
clocksource/drivers/asm9260: Add a check for of_clk_get
clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
clocksource/drivers/renesas-ostm: Convert to timer_of
clocksource/drivers/timer-of: Use unique device name instead of timer
clocksource/drivers/timer-of: Convert last full_name to %pOF
|
|
Shift and mask were reversed. Noticed by chance.
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The recent commit 5c72299fba9d ("net: sched: cls_flower: Classify
packets using port ranges") had added filtering based on port ranges
to tc flower. However the commit missed necessary changes in hw-offload
code, so the feature gave rise to generating incorrect offloaded flow
keys in NIC.
One more detailed example is below:
$ tc qdisc add dev eth0 ingress
$ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \
dst_port 100-200 action drop
With the setup above, an exact match filter with dst_port == 0 will be
installed in NIC by hw-offload. IOW, the NIC will have a rule which is
equivalent to the following one.
$ tc qdisc add dev eth0 ingress
$ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \
dst_port 0 action drop
The behavior was caused by the flow dissector which extracts packet
data into the flow key in the tc flower. More specifically, regardless
of exact match or specified port ranges, fl_init_dissector() set the
FLOW_DISSECTOR_KEY_PORTS flag in struct flow_dissector to extract port
numbers from skb in skb_flow_dissect() called by fl_classify(). Note
that device drivers received the same struct flow_dissector object as
used in skb_flow_dissect(). Thus, offloaded drivers could not identify
which of these is used because the FLOW_DISSECTOR_KEY_PORTS flag was
set to struct flow_dissector in either case.
This patch adds the new FLOW_DISSECTOR_KEY_PORTS_RANGE flag and the new
tp_range field in struct fl_flow_key to recognize which filters are applied
to offloaded drivers. At this point, when filters based on port ranges
passed to drivers, drivers return the EOPNOTSUPP error because they do
not support the feature (the newly created FLOW_DISSECTOR_KEY_PORTS_RANGE
flag).
Fixes: 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sch->q.len hasn't been set if the subqueue is a NOLOCK qdisc
in mq_dump() and mqprio_dump().
Fixes: ce679e8df7ed ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It appears linux-4.14 stable needs a backport of commit
88f8598d0a30 ("tcp: exit if nothing to retransmit on RTO timeout")
Since tcp_rtx_queue_empty() is not in pre 4.15 kernels,
let's refactor tcp_retransmit_timer() to only use tcp_rtx_queue_head()
I will provide to stable teams the squashed patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit 609f5485344b ("ALSA: hda: hdmi - preserve non-MST PCM
routing for Intel platforms") tried to restore the old behavior wrt
assignment of the PCM slot for Intel platforms, but this didn't do it
right. As found in the later discussion, a positive pipe id on Intel
platforms can be passed for single monitor attachment case.
This patch reverts the previous attempt and applies a simpler
workaround instead. Actually, for Intel platforms, we can handle as
if per_pin->dev_id=0, assign the primary slot at the first try. This
assures the compatible behavior with the previous versions regarding
the slot assignment.
Fixes: 609f5485344b ("ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms")
Link: https://lore.kernel.org/r/20191203154105.30414-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently a switch driver deinit frees the regmaps, but the PTP clock is
still out there, available to user space via /dev/ptpN. Any PTP
operation is a ticking time bomb, since it will attempt to use the freed
regmaps and thus trigger kernel panics:
[ 4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy
[ 4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22
[ 4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22
[ 6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
[ 6.367090] Mem abort info:
[ 6.369888] ESR = 0x96000046
[ 6.369891] EC = 0x25: DABT (current EL), IL = 32 bits
[ 6.369892] SET = 0, FnV = 0
[ 6.369894] EA = 0, S1PTW = 0
[ 6.369895] Data abort info:
[ 6.369897] ISV = 0, ISS = 0x00000046
[ 6.369899] CM = 0, WnR = 1
[ 6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000
[ 6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000
[ 6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP
[ 6.420443] Modules linked in:
[ 6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204
[ 6.431273] Hardware name: LS1028A RDB Board (DT)
[ 6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO)
[ 6.440802] pc : css_release+0x24/0x58
[ 6.444561] lr : regmap_read+0x40/0x78
[ 6.448316] sp : ffff800010513cc0
[ 6.451636] x29: ffff800010513cc0 x28: ffff002055873040
[ 6.456963] x27: 0000000000000000 x26: 0000000000000000
[ 6.462289] x25: 0000000000000000 x24: 0000000000000000
[ 6.467617] x23: 0000000000000000 x22: 0000000000000080
[ 6.472944] x21: ffff800010513d44 x20: 0000000000000080
[ 6.478270] x19: 0000000000000000 x18: 0000000000000000
[ 6.483596] x17: 0000000000000000 x16: 0000000000000000
[ 6.488921] x15: 0000000000000000 x14: 0000000000000000
[ 6.494247] x13: 0000000000000000 x12: 0000000000000000
[ 6.499573] x11: 0000000000000000 x10: 0000000000000000
[ 6.504899] x9 : 0000000000000000 x8 : 0000000000000000
[ 6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0
[ 6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0
[ 6.520876] x3 : 0000000000000088 x2 : ffff800010513d44
[ 6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0
[ 6.531528] Call trace:
[ 6.533977] css_release+0x24/0x58
[ 6.537385] regmap_read+0x40/0x78
[ 6.540795] __ocelot_read_ix+0x6c/0xa0
[ 6.544641] ocelot_ptp_gettime64+0x4c/0x110
[ 6.548921] ptp_clock_gettime+0x4c/0x58
[ 6.552853] pc_clock_gettime+0x5c/0xa8
[ 6.556699] __arm64_sys_clock_gettime+0x68/0xc8
[ 6.561331] el0_svc_common.constprop.2+0x7c/0x178
[ 6.566133] el0_svc_handler+0x34/0xa0
[ 6.569891] el0_sync_handler+0x114/0x1d0
[ 6.573908] el0_sync+0x140/0x180
[ 6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663)
[ 6.583349] ---[ end trace d196b9b14cdae2da ]---
[ 6.587977] Kernel panic - not syncing: Fatal exception
[ 6.593216] SMP: stopping secondary CPUs
[ 6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000
[ 6.603261] PHYS_OFFSET: 0xffffd0a7c0000000
[ 6.607454] CPU features: 0x10002,21806008
[ 6.611558] Memory Limit: none
And now that ocelot->ptp_clock is checked at exit, prevent a potential
error where ptp_clock_register returned a pointer-encoded error, which
we are keeping in the ocelot private data structure. So now,
ocelot->ptp_clock is now either NULL or a valid pointer.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In addition to filling the node_guid and port_guid attributes,
there is a need to populate VF index too, otherwise users of netlink
interface will see same VF index for all VFs.
Fixes: 30aad41721e0 ("net/core: Add support for getting VF GUIDs")
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have an interesting memory leak in the bridge when it is being
unregistered and is a slave to a master device which would change the
mac of its slaves on unregister (e.g. bond, team). This is a very
unusual setup but we do end up leaking 1 fdb entry because
dev_set_mac_address() would cause the bridge to insert the new mac address
into its table after all fdbs are flushed, i.e. after dellink() on the
bridge has finished and we call NETDEV_UNREGISTER the bond/team would
release it and will call dev_set_mac_address() to restore its original
address and that in turn will add an fdb in the bridge.
One fix is to check for the bridge dev's reg_state in its
ndo_set_mac_address callback and return an error if the bridge is not in
NETREG_REGISTERED.
Easy steps to reproduce:
1. add bond in mode != A/B
2. add any slave to the bond
3. add bridge dev as a slave to the bond
4. destroy the bridge device
Trace:
unreferenced object 0xffff888035c4d080 (size 128):
comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s)
hex dump (first 32 bytes):
41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............
d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?...........
backtrace:
[<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f
[<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge]
[<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge]
[<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge]
[<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge]
[<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge]
[<000000006846a77f>] dev_set_mac_address+0x63/0x9b
[<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding]
[<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding]
[<00000000305d7795>] notifier_call_chain+0x38/0x56
[<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23
[<000000008279477b>] rollback_registered_many+0x353/0x6a4
[<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f
[<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43
[<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a
[<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268
Fixes: 43598813386f ("bridge: add local MAC address to forwarding table (v2)")
Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have to free "dev->name_node" on this error path.
Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist")
Reported-by: syzbot+6e13e65ffbaa33757bcb@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-12-03
this is a pull request of 6 patches for net/master.
The first two patches are against the MAINTAINERS file and adds Appana
Durga Kedareswara rao as maintainer for the xilinx-can driver and Sriram
Dash for the m_can (mmio) driver.
The next patch is by Jouni Hogander and fixes a use-after-free in the
slcan driver.
Johan Hovold's patch for the ucan driver fixes the non-atomic allocation
in the completion handler.
The last two patches target the xilinx-can driver. The first one is by
Venkatesh Yadav Abbarapu and skips the error message on deferred probe,
the second one is by Srinivas Neeli and fixes the usage of the skb after
can_put_echo_skb().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now we return it to userspace, which means the application has
to poll for the socket to be writeable. Let's just treat it like
-EAGAIN and have io_uring handle it internally, this makes it much
easier to use.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Ingo Molnar:
"Most of the IRQ subsystem changes in this cycle were irq-chip driver
updates:
- Qualcomm PDC wakeup interrupt support
- Layerscape external IRQ support
- Broadcom bcm7038 PM and wakeup support
- Ingenic driver cleanup and modernization
- GICv3 ITS preparation for GICv4.1 updates
- GICv4 fixes
There's also the series from Frederic Weisbecker that fixes memory
ordering bugs for the irq-work logic, whose primary fix is to turn
work->irq_work.flags into an atomic variable and then convert the
complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
much simpler atomic_fetch_or() call.
There are also various smaller cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
pinctrl/msm: Setup GPIO chip in hierarchy
irqchip/qcom-pdc: Add irqchip set/get state calls
irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
irqchip/qcom-pdc: Update max PDC interrupts
of/irq: Document properties for wakeup interrupt parent
genirq: Introduce irq_chip_get/set_parent_state calls
irqdomain: Add bus token DOMAIN_BUS_WAKEUP
genirq: Fix function documentation of __irq_alloc_descs()
irq_work: Fix IRQ_WORK_BUSY bit clearing
irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
irq_work: Slightly simplify IRQ_WORK_PENDING clearing
irq_work: Fix irq_work_claim() memory ordering
irq_work: Convert flags to atomic_t
irqchip: Ingenic: Add process for more than one irq at the same time.
irqchip: ingenic: Alloc generic chips from IRQ domain
irqchip: ingenic: Get virq number from IRQ domain
irqchip: ingenic: Error out if IRQ domain creation failed
irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi updates from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Add dmi_memdev_handle
firmware: dmi: Remember the memory type
|
|
The current zone revalidation code has a major problem in that it
doesn't update the zone size and q->nr_zones atomically, leading
to a short window where an out of bounds access to the zone arrays
is possible.
To fix this move the setting of the zone size into the crticial
sections blk_revalidate_disk_zones so that it gets updated together
with the zone bitmaps and q->nr_zones. This also slightly simplifies
the caller as it deducts the zone size from the report_zones.
This change also allows to check for a power of two zone size in generic
code.
Reported-by: Hans Holmberg <hans@owltronix.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
