summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-08net: ethtool: fix off-by-one error in max RSS context IDsEdward Cree
Both ethtool_ops.rxfh_max_context_id and the default value used when it's not specified are supposed to be exclusive maxima (the former is documented as such; the latter, U32_MAX, cannot be used as an ID since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an inclusive maximum. Subtract one from 'limit' to produce an inclusive maximum, and pass that to xa_alloc(). Increase bnxt's max by one to prevent a (very minor) regression, as BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a leftover from old driver code that managed context IDs itself. Rename rxfh_max_context_id to rxfh_max_num_contexts to make its semantics (hopefully) more obvious. Fixes: 847a8ab18676 ("net: ethtool: let the core choose RSS context IDs") Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: pse-pd: tps23881: include missing bitfield.h headerArnd Bergmann
Using FIELD_GET() fails in configurations that don't already include the header file indirectly: drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe': drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration] 755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) { | ^~~~~~~~~ Fixes: 89108cb5c285 ("net: pse-pd: tps23881: Fix the device ID check") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: fec: Stop PPS on driver removeCsókás, Bence
PPS was not stopped in `fec_ptp_stop()`, called when the adapter was removed. Consequentially, you couldn't safely reload the driver with the PPS signal on. Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path") Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79f Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilitiesFlorian Fainelli
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC, while others might be only supported by the PHY. Make sure that the .get_wol() returns the union of both rather than only that of the PHY if the PHY supports Wake-on-LAN. Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08l2tp: fix lockdep splatJames Chapman
When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: stmmac: dwmac4: fix PCS duplex mode decodeRussell King (Oracle)
dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1) rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this. Fixes: 70523e639bf8c ("drivers: net: stmmac: reworking the PCS code.") Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Nine hotfixes. Five are cc:stable, the others either pertain to post-6.10 material or aren't considered necessary for earlier kernels. Five are MM and four are non-MM. No identifiable theme here - please see the individual changelogs" * tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: padata: Fix possible divide-by-0 panic in padata_mt_helper() mailmap: update entry for David Heidelberg memcg: protect concurrent access to mem_cgroup_idr mm: shmem: fix incorrect aligned index when checking conflicts mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem mm: list_lru: fix UAF for memory cgroup kcov: properly check for softirq context MAINTAINERS: Update LTP members and web selftests: mm: add s390 to ARCH check
2024-08-07Merge tag 'for-net-2024-08-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: avoid dup filtering when passive scanning with adv monitor - hci_qca: don't call pwrseq_power_off() twice for QCA6390 - hci_qca: fix QCA6390 support on non-DT platforms - hci_qca: fix a NULL-pointer derefence at shutdown - l2cap: always unlock channel in l2cap_conless_channel() * tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ==================== Link: https://patch.msgid.link/20240807210103.142483-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07Merge branch 'idpf-fix-3-bugs-revealed-by-the-chapter-i'Jakub Kicinski
Tony Nguyen says: ==================== idpf: fix 3 bugs revealed by the Chapter I Alexander Lobakin says: The libeth conversion revealed 2 serious issues which lead to sporadic crashes or WARNs under certain configurations. Additional one was found while debugging these two with kmemleak. This one is targeted stable, the rest can be backported manually later if needed. They can be reproduced only after the conversion is applied anyway. ==================== Link: https://patch.msgid.link/20240806220923.3359860-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07idpf: fix UAFs when destroying the queuesAlexander Lobakin
The second tagged commit started sometimes (very rarely, but possible) throwing WARNs from net/core/page_pool.c:page_pool_disable_direct_recycling(). Turned out idpf frees interrupt vectors with embedded NAPIs *before* freeing the queues making page_pools' NAPI pointers lead to freed memory before these pools are destroyed by libeth. It's not clear whether there are other accesses to the freed vectors when destroying the queues, but anyway, we usually free queue/interrupt vectors only when the queues are destroyed and the NAPIs are guaranteed to not be referenced anywhere. Invert the allocation and freeing logic making queue/interrupt vectors be allocated first and freed last. Vectors don't require queues to be present, so this is safe. Additionally, this change allows to remove that useless queue->q_vector pointer cleanup, as vectors are still valid when freeing the queues (+ both are freed within one function, so it's not clear why nullify the pointers at all). Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()") Reported-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07idpf: fix memleak in vport interrupt configurationMichal Kubiak
The initialization of vport interrupt consists of two functions: 1) idpf_vport_intr_init() where a generic configuration is done 2) idpf_vport_intr_req_irq() where the irq for each q_vector is requested. The first function used to create a base name for each interrupt using "kasprintf()" call. Unfortunately, although that call allocated memory for a text buffer, that memory was never released. Fix this by removing creating the interrupt base name in 1). Instead, always create a full interrupt name in the function 2), because there is no need to create a base name separately, considering that the function 2) is never called out of idpf_vport_intr_init() context. Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Cc: stable@vger.kernel.org # 6.7 Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07idpf: fix memory leaks and crashes while performing a soft resetAlexander Lobakin
The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled. Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Fixes: e4891e4687c8 ("idpf: split &idpf_queue into 4 strictly-typed queue structures") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()Michael Chan
A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false). With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison: if (old_rx_rings != bp->hw_resc.resv_rx_rings) in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index. We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression: BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 Read of size 2 at addr ffff8881c5809618 by task ethtool/31525 Call Trace: __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460 __bnxt_setup_vnic_p5+0x12e/0x270 __bnxt_open_nic+0x2262/0x2f30 bnxt_open_nic+0x5d/0xf0 ethnl_set_channels+0x5d4/0xb30 ethnl_default_set_doit+0x2f1/0x620 Reported-by: Breno Leitao <leitao@debian.org> Closes: https://lore.kernel.org/netdev/ZrC6jpghA3PWVWSB@gmail.com/ Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240806053742.140304-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()Joe Hattori
bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount. Fixes: 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07net/smc: add the max value of fallback reason countZhengchao Shao
The number of fallback reasons defined in the smc_clc.h file has reached 36. For historical reasons, some are no longer quoted, and there's 33 actually in use. So, add the max value of fallback reason count to 36. Fixes: 6ac1e6563f59 ("net/smc: support smc v2.x features validate") Fixes: 7f0620b9940b ("net/smc: support max connections per lgr negotiation") Fixes: 69b888e3bb4b ("net/smc: support max links per lgr negotiation in clc handshake") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20240805043856.565677-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07padata: Fix possible divide-by-0 panic in padata_mt_helper()Waiman Long
We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] <TASK> [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] </TASK> Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are. Link: https://lkml.kernel.org/r/20240806174647.1050398-1-longman@redhat.com Fixes: 004ed42638f4 ("padata: add basic support for multithreaded jobs") Signed-off-by: Waiman Long <longman@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07mailmap: update entry for David HeidelbergDavid Heidelberg
Link my old gmail address to my active email. Link: https://lkml.kernel.org/r/20240804054704.859503-1-david@ixit.cz Signed-off-by: David Heidelberg <david@ixit.cz> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07memcg: protect concurrent access to mem_cgroup_idrShakeel Butt
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against concurrency and can be run concurrently for different memcgs when they hit their refcnt to zero. Fix that. We have been seeing list_lru based kernel crashes at a low frequency in our fleet for a long time. These crashes were in different part of list_lru code including list_lru_add(), list_lru_del() and reparenting code. Upon further inspection, it looked like for a given object (dentry and inode), the super_block's list_lru didn't have list_lru_one for the memcg of that object. The initial suspicions were either the object is not allocated through kmem_cache_alloc_lru() or somehow memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but returned success. No evidence were found for these cases. Looking more deeply, we started seeing situations where valid memcg's id is not present in mem_cgroup_idr and in some cases multiple valid memcgs have same id and mem_cgroup_idr is pointing to one of them. So, the most reasonable explanation is that these situations can happen due to race between multiple idr_remove() calls or race between idr_alloc()/idr_replace() and idr_remove(). These races are causing multiple memcgs to acquire the same ID and then offlining of one of them would cleanup list_lrus on the system for all of them. Later access from other memcgs to the list_lru cause crashes due to missing list_lru_one. Link: https://lkml.kernel.org/r/20240802235822.1830976-1-shakeel.butt@linux.dev Fixes: 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Muchun Song <muchun.song@linux.dev> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07mm: shmem: fix incorrect aligned index when checking conflictsBaolin Wang
In the shmem_suitable_orders() function, xa_find() is used to check for conflicts in the pagecache to select suitable huge orders. However, when checking each huge order in every loop, the aligned index is calculated from the previous iteration, which may cause suitable huge orders to be missed. We should use the original index each time in the loop to calculate a new aligned index for checking conflicts to avoid this issue. Link: https://lkml.kernel.org/r/07433b0f16a152bffb8cee34934a5c040e8e2ad6.1722404078.git.baolin.wang@linux.alibaba.com Fixes: e7a2ab7b3bb5 ("mm: shmem: add mTHP support for anonymous shmem") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmemBaolin Wang
Similar to commit d659b715e94ac ("mm/huge_memory: avoid PMD-size page cache if needed"), ARM64 can support 512MB PMD-sized THP when the base page size is 64KB, which is larger than the maximum supported page cache size MAX_PAGECACHE_ORDER. This is not expected. To fix this issue, use THP_ORDERS_ALL_FILE_DEFAULT for shmem to filter allowable huge orders. [baolin.wang@linux.alibaba.com: remove comment, per Barry] Link: https://lkml.kernel.org/r/c55d7ef7-78aa-4ed6-b897-c3e03a3f3ab7@linux.alibaba.com [wangkefeng.wang@huawei.com: remove local `orders'] Link: https://lkml.kernel.org/r/87769ae8-b6c6-4454-925d-1864364af9c8@huawei.com Link: https://lkml.kernel.org/r/117121665254442c3c7f585248296495e5e2b45c.1722404078.git.baolin.wang@linux.alibaba.com Fixes: e7a2ab7b3bb5 ("mm: shmem: add mTHP support for anonymous shmem") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Barry Song <21cnbao@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07mm: list_lru: fix UAF for memory cgroupMuchun Song
The mem_cgroup_from_slab_obj() is supposed to be called under rcu lock or cgroup_mutex or others which could prevent returned memcg from being freed. Fix it by adding missing rcu read lock. Found by code inspection. [songmuchun@bytedance.com: only grab rcu lock when necessary, per Vlastimil] Link: https://lkml.kernel.org/r/20240801024603.1865-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20240718083607.42068-1-songmuchun@bytedance.com Fixes: 0a97c01cd20b ("list_lru: allow explicit memcg and NUMA node selection") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07kcov: properly check for softirq contextAndrey Konovalov
When collecting coverage from softirqs, KCOV uses in_serving_softirq() to check whether the code is running in the softirq context. Unfortunately, in_serving_softirq() is > 0 even when the code is running in the hardirq or NMI context for hardirqs and NMIs that happened during a softirq. As a result, if a softirq handler contains a remote coverage collection section and a hardirq with another remote coverage collection section happens during handling the softirq, KCOV incorrectly detects a nested softirq coverate collection section and prints a WARNING, as reported by syzbot. This issue was exposed by commit a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler"), which switched dummy_hcd to using hrtimer and made the timer's callback be executed in the hardirq context. Change the related checks in KCOV to account for this behavior of in_serving_softirq() and make KCOV ignore remote coverage collection sections in the hardirq and NMI contexts. This prevents the WARNING printed by syzbot but does not fix the inability of KCOV to collect coverage from the __usb_hcd_giveback_urb when dummy_hcd is in use (caused by a7f3813e589f); a separate patch is required for that. Link: https://lkml.kernel.org/r/20240729022158.92059-1-andrey.konovalov@linux.dev Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts") Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Reported-by: syzbot+2388cdaeb6b10f0c13ac@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2388cdaeb6b10f0c13ac Acked-by: Marco Elver <elver@google.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Marcello Sylvester Bauer <sylv@sylv.io> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07MAINTAINERS: Update LTP members and webPetr Vorel
LTP project uses now readthedocs.org instance instead of GitHub wiki. LTP maintainers are listed in alphabetical order. Link: https://lkml.kernel.org/r/20240726072009.1021599-1-pvorel@suse.cz Signed-off-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Li Wang <liwang@redhat.com> Reviewed-by: Cyril Hrubis <chrubis@suse.cz> Cc: Jan Stancek <jstancek@redhat.com> Cc: Xiao Yang <yangx.jy@fujitsu.com> Cc: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07selftests: mm: add s390 to ARCH checkNico Pache
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM") changed the env variable for the architecture from MACHINE to ARCH. This is preventing 3 required TEST_GEN_FILES from being included when cross compiling s390x and errors when trying to run the test suite. This is due to the ARCH variable already being set and the arch folder name being s390. Add "s390" to the filtered list to cover this case and have the 3 files included in the build. Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM") Signed-off-by: Nico Pache <npache@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07bcachefs: Use bch2_wait_on_allocator() in btree node alloc pathKent Overstreet
If the allocator gets stuck, we need to know why. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-07bcachefs: Make allocator stuck timeout configurable, ratelimit messagesKent Overstreet
Limit these messages to once every 2 minutes to avoid spamming logs; with multiple devices the output can be quite significant. Also, up the default timeout to 30 seconds from 10 seconds. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-07bcachefs: Add missing path_traverse() to btree_iter_next_node()Kent Overstreet
This fixes a bug exposed by the next path - we pop an assert in path_set_should_be_locked(). Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-07tracefs: Use generic inode RCU for synchronizing freeingSteven Rostedt
With structure layout randomization enabled for 'struct inode' we need to avoid overlapping any of the RCU-used / initialized-only-once members, e.g. i_lru or i_sb_list to not corrupt related list traversals when making use of the rcu_head. For an unlucky structure layout of 'struct inode' we may end up with the following splat when running the ftrace selftests: [<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object]) [<...>] ------------[ cut here ]------------ [<...>] kernel BUG at lib/list_debug.c:54! [<...>] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ #122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65 [<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0 [<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f [<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283 [<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000 [<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001 [<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25 [<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d [<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000 [<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0 [<...>] RSI: __func__.47+0x4340/0x4400 [<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550] [<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550] [<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550] [<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object] [<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000 [<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0 [<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [<...>] ASID: 0003 [<...>] Stack: [<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0 [<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f [<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392 [<...>] Call Trace: [<...>] <TASK> [<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0 [<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48 [<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88 [<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90 [<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8 [<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8 [<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40 [<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48 [<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70 [<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78 [<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80 [<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8 [<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0 [<...>] [<ffffffff8294ad20>] ? do_one_tree+0x140/0x140 fffffe80416afcf8 [<...>] [<ffffffff82997349>] ? do_remount+0x329/0xa00 fffffe80416afd18 [<...>] [<ffffffff83ebf7a1>] ? security_sb_remount+0x81/0x1c0 fffffe80416afd38 [<...>] [<ffffffff82892096>] reconfigure_super+0x856/0x14e0 fffffe80416afd70 [<...>] [<ffffffff815d1327>] ? ns_capable_common+0xe7/0x2a0 fffffe80416afd90 [<...>] [<ffffffff82997436>] do_remount+0x416/0xa00 fffffe80416afdd0 [<...>] [<ffffffff829b2ba4>] path_mount+0x5c4/0x900 fffffe80416afe28 [<...>] [<ffffffff829b25e0>] ? finish_automount+0x13a0/0x13a0 fffffe80416afe60 [<...>] [<ffffffff82903812>] ? user_path_at_empty+0xb2/0x140 fffffe80416afe88 [<...>] [<ffffffff829b2ff5>] do_mount+0x115/0x1c0 fffffe80416afeb8 [<...>] [<ffffffff829b2ee0>] ? path_mount+0x900/0x900 fffffe80416afed8 [<...>] [<ffffffff8272461c>] ? __kasan_check_write+0x1c/0xa0 fffffe80416afee0 [<...>] [<ffffffff829b31cf>] __do_sys_mount+0x12f/0x280 fffffe80416aff30 [<...>] [<ffffffff829b36cd>] __x64_sys_mount+0xcd/0x2e0 fffffe80416aff70 [<...>] [<ffffffff819f8818>] ? syscall_trace_enter+0x218/0x380 fffffe80416aff88 [<...>] [<ffffffff8111655e>] x64_sys_call+0x5d5e/0x6720 fffffe80416affa8 [<...>] [<ffffffff8952756d>] do_syscall_64+0xcd/0x3c0 fffffe80416affb8 [<...>] [<ffffffff8100119b>] entry_SYSCALL_64_safe_stack+0x4c/0x87 fffffe80416affe8 [<...>] </TASK> [<...>] <PTREGS> [<...>] RIP: 0033:[<00006dcb382ff66a>] vm_area_struct[mount 2550 2550 file 6dcb38225000-6dcb3837e000 22 55(read|exec|mayread|mayexec)]+0x0/0xb8 [userland map] [<...>] Code: 48 8b 0d 29 18 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f6 17 0d 00 f7 d8 64 89 01 48 [<...>] RSP: 002b:0000763d68192558 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [<...>] RAX: ffffffffffffffda RBX: 00006dcb38433264 RCX: 00006dcb382ff66a [<...>] RDX: 000017c3e0d11210 RSI: 000017c3e0d1a5a0 RDI: 000017c3e0d1ae70 [<...>] RBP: 000017c3e0d10fb0 R08: 000017c3e0d11260 R09: 00006dcb383d1be0 [<...>] R10: 000000000020002e R11: 0000000000000246 R12: 0000000000000000 [<...>] R13: 000017c3e0d1ae70 R14: 000017c3e0d11210 R15: 000017c3e0d10fb0 [<...>] RBX: vm_area_struct[mount 2550 2550 file 6dcb38433000-6dcb38434000 5b 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RCX: vm_area_struct[mount 2550 2550 file 6dcb38225000-6dcb3837e000 22 55(read|exec|mayread|mayexec)]+0x0/0xb8 [userland map] [<...>] RDX: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RSI: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RDI: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RBP: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RSP: vm_area_struct[mount 2550 2550 anon 763d68173000-763d68195000 7ffffffdd 100133(read|write|mayread|maywrite|growsdown|account)]+0x0/0xb8 [userland map] [<...>] R08: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R09: vm_area_struct[mount 2550 2550 file 6dcb383d1000-6dcb383d3000 1cd 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R13: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R14: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R15: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] </PTREGS> [<...>] Modules linked in: [<...>] ---[ end trace 0000000000000000 ]--- The list debug message as well as RBX's symbolic value point out that the object in question was allocated from 'tracefs_inode_cache' and that the list's '->next' member is at offset 0. Dumping the layout of the relevant parts of 'struct tracefs_inode' gives the following: struct tracefs_inode { union { struct inode { struct list_head { struct list_head * next; /* 0 8 */ struct list_head * prev; /* 8 8 */ } i_lru; [...] } vfs_inode; struct callback_head { void (*func)(struct callback_head *); /* 0 8 */ struct callback_head * next; /* 8 8 */ } rcu; }; [...] }; Above shows that 'vfs_inode.i_lru' overlaps with 'rcu' which will destroy the 'i_lru' list as soon as the 'rcu' member gets used, e.g. in call_rcu() or later when calling the RCU callback. This will disturb concurrent list traversals as well as object reuse which assumes these list heads will keep their integrity. For reproduction, the following diff manually overlays 'i_lru' with 'rcu' as, otherwise, one would require some good portion of luck for gambling an unlucky RANDSTRUCT seed: --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -629,6 +629,7 @@ struct inode { umode_t i_mode; unsigned short i_opflags; kuid_t i_uid; + struct list_head i_lru; /* inode LRU list */ kgid_t i_gid; unsigned int i_flags; @@ -690,7 +691,6 @@ struct inode { u16 i_wb_frn_avg_time; u16 i_wb_frn_history; #endif - struct list_head i_lru; /* inode LRU list */ struct list_head i_sb_list; struct list_head i_wb_list; /* backing dev writeback list */ union { The tracefs inode does not need to supply its own RCU delayed destruction of its inode. The inode code itself offers both a "destroy_inode()" callback that gets called when the last reference of the inode is released, and the "free_inode()" which is called after a RCU synchronization period from the "destroy_inode()". The tracefs code can unlink the inode from its list in the destroy_inode() callback, and the simply free it from the free_inode() callback. This should provide the same protection. Link: https://lore.kernel.org/all/20240807115143.45927-3-minipli@grsecurity.net/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Ajay Kaher <ajay.kaher@broadcom.com> Cc: Ilkka =?utf-8?b?TmF1bGFww6TDpA==?= <digirigawa@gmail.com> Link: https://lore.kernel.org/20240807185402.61410544@gandalf.local.home Fixes: baa23a8d4360 ("tracefs: Reset permissions on remount if permissions are options") Reported-by: Mathias Krause <minipli@grsecurity.net> Reported-by: Brad Spengler <spender@grsecurity.net> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07ring-buffer: Remove unused function ring_buffer_nr_pages()Jianhui Zhou
Because ring_buffer_nr_pages() is not an inline function and user accesses buffer->buffers[cpu]->nr_pages directly, the function ring_buffer_nr_pages is removed. Signed-off-by: Jianhui Zhou <912460177@qq.com> Link: https://lore.kernel.org/tencent_F4A7E9AB337F44E0F4B858D07D19EF460708@qq.com Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07tracing: Fix overflow in get_free_elt()Tze-nan Wu
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt". Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map") Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com> Link: https://lore.kernel.org/20240805055922.6277-1-Tze-nan.Wu@mediatek.com Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com> Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07function_graph: Fix the ret_stack used by ftrace_graph_ret_addr()Petr Pavlu
When ftrace_graph_ret_addr() is invoked to convert a found stack return address to its original value, the function can end up producing the following crash: [ 95.442712] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 95.442720] #PF: supervisor read access in kernel mode [ 95.442724] #PF: error_code(0x0000) - not-present page [ 95.442727] PGD 0 P4D 0- [ 95.442731] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [ 95.442736] CPU: 1 UID: 0 PID: 2214 Comm: insmod Kdump: loaded Tainted: G OE K 6.11.0-rc1-default #1 67c62a3b3720562f7e7db5f11c1fdb40b7a2857c [ 95.442747] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE, [K]=LIVEPATCH [ 95.442750] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 [ 95.442754] RIP: 0010:ftrace_graph_ret_addr+0x42/0xc0 [ 95.442766] Code: [...] [ 95.442773] RSP: 0018:ffff979b80ff7718 EFLAGS: 00010006 [ 95.442776] RAX: ffffffff8ca99b10 RBX: ffff979b80ff7760 RCX: ffff979b80167dc0 [ 95.442780] RDX: ffffffff8ca99b10 RSI: ffff979b80ff7790 RDI: 0000000000000005 [ 95.442783] RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000000 [ 95.442786] R10: 0000000000000005 R11: 0000000000000000 R12: ffffffff8e9491e0 [ 95.442790] R13: ffffffff8d6f70f0 R14: ffff979b80167da8 R15: ffff979b80167dc8 [ 95.442793] FS: 00007fbf83895740(0000) GS:ffff8a0afdd00000(0000) knlGS:0000000000000000 [ 95.442797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.442800] CR2: 0000000000000028 CR3: 0000000005070002 CR4: 0000000000370ef0 [ 95.442806] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.442809] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.442816] Call Trace: [ 95.442823] <TASK> [ 95.442896] unwind_next_frame+0x20d/0x830 [ 95.442905] arch_stack_walk_reliable+0x94/0xe0 [ 95.442917] stack_trace_save_tsk_reliable+0x7d/0xe0 [ 95.442922] klp_check_and_switch_task+0x55/0x1a0 [ 95.442931] task_call_func+0xd3/0xe0 [ 95.442938] klp_try_switch_task.part.5+0x37/0x150 [ 95.442942] klp_try_complete_transition+0x79/0x2d0 [ 95.442947] klp_enable_patch+0x4db/0x890 [ 95.442960] do_one_initcall+0x41/0x2e0 [ 95.442968] do_init_module+0x60/0x220 [ 95.442975] load_module+0x1ebf/0x1fb0 [ 95.443004] init_module_from_file+0x88/0xc0 [ 95.443010] idempotent_init_module+0x190/0x240 [ 95.443015] __x64_sys_finit_module+0x5b/0xc0 [ 95.443019] do_syscall_64+0x74/0x160 [ 95.443232] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 95.443236] RIP: 0033:0x7fbf82f2c709 [ 95.443241] Code: [...] [ 95.443247] RSP: 002b:00007fffd5ea3b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 95.443253] RAX: ffffffffffffffda RBX: 000056359c48e750 RCX: 00007fbf82f2c709 [ 95.443257] RDX: 0000000000000000 RSI: 000056356ed4efc5 RDI: 0000000000000003 [ 95.443260] RBP: 000056356ed4efc5 R08: 0000000000000000 R09: 00007fffd5ea3c10 [ 95.443263] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 [ 95.443267] R13: 000056359c48e6f0 R14: 0000000000000000 R15: 0000000000000000 [ 95.443272] </TASK> [ 95.443274] Modules linked in: [...] [ 95.443385] Unloaded tainted modules: intel_uncore_frequency(E):1 isst_if_common(E):1 skx_edac(E):1 [ 95.443414] CR2: 0000000000000028 The bug can be reproduced with kselftests: cd linux/tools/testing/selftests make TARGETS='ftrace livepatch' (cd ftrace; ./ftracetest test.d/ftrace/fgraph-filter.tc) (cd livepatch; ./test-livepatch.sh) The problem is that ftrace_graph_ret_addr() is supposed to operate on the ret_stack of a selected task but wrongly accesses the ret_stack of the current task. Specifically, the above NULL dereference occurs when task->curr_ret_stack is non-zero, but current->ret_stack is NULL. Correct ftrace_graph_ret_addr() to work with the right ret_stack. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/20240803131211.17255-1-petr.pavlu@suse.com Fixes: 7aa1eaef9f42 ("function_graph: Allow multiple users to attach to function graph") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07eventfs: Use SRCU for freeing eventfs_inodesMathias Krause
To mirror the SRCU lock held in eventfs_iterate() when iterating over eventfs inodes, use call_srcu() to free them too. This was accidentally(?) degraded to RCU in commit 43aa6f97c2d0 ("eventfs: Get rid of dentry pointers without refcounts"). Cc: Ajay Kaher <ajay.kaher@broadcom.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20240723210755.8970-1-minipli@grsecurity.net Fixes: 43aa6f97c2d0 ("eventfs: Get rid of dentry pointers without refcounts") Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07eventfs: Don't return NULL in eventfs_create_dir()Mathias Krause
Commit 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing ei->dentry") added another check, testing if the parent was freed after we released the mutex. If so, the function returns NULL. However, all callers expect it to either return a valid pointer or an error pointer, at least since commit 5264a2f4bb3b ("tracing: Fix a NULL vs IS_ERR() bug in event_subsystem_dir()"). Returning NULL will therefore fail the error condition check in the caller. Fix this by substituting the NULL return value with a fitting error pointer. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Fixes: 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing ei->dentry") Link: https://lore.kernel.org/20240723122522.2724-1-minipli@grsecurity.net Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ajay Kaher <ajay.kaher@broadcom.com> Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07tracefs: Fix inode allocationMathias Krause
The leading comment above alloc_inode_sb() is pretty explicit about it: /* * This must be used for allocating filesystems specific inodes to set * up the inode reclaim context correctly. */ Switch tracefs over to alloc_inode_sb() to make sure inodes are properly linked. Cc: Ajay Kaher <ajay.kaher@broadcom.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20240807115143.45927-2-minipli@grsecurity.net Fixes: ba37ff75e04b ("eventfs: Implement tracefs_inode_cache") Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07tracing: Use refcount for trace_event_file reference counterSteven Rostedt
Instead of using an atomic counter for the trace_event_file reference counter, use the refcount interface. It has various checks to make sure the reference counting is correct, and will warn if it detects an error (like refcount_inc() on '0'). Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20240726144208.687cce24@rorschach.local.home Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07tracing: Have format file honor EVENT_FILE_FL_FREEDSteven Rostedt
When eventfs was introduced, special care had to be done to coordinate the freeing of the file meta data with the files that are exposed to user space. The file meta data would have a ref count that is set when the file is created and would be decremented and freed after the last user that opened the file closed it. When the file meta data was to be freed, it would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed, and any new references made (like new opens or reads) would fail as it is marked freed. This allowed other meta data to be freed after this flag was set (under the event_mutex). All the files that were dynamically created in the events directory had a pointer to the file meta data and would call event_release() when the last reference to the user space file was closed. This would be the time that it is safe to free the file meta data. A shortcut was made for the "format" file. It's i_private would point to the "call" entry directly and not point to the file's meta data. This is because all format files are the same for the same "call", so it was thought there was no reason to differentiate them. The other files maintain state (like the "enable", "trigger", etc). But this meant if the file were to disappear, the "format" file would be unaware of it. This caused a race that could be trigger via the user_events test (that would create dynamic events and free them), and running a loop that would read the user_events format files: In one console run: # cd tools/testing/selftests/user_events # while true; do ./ftrace_test; done And in another console run: # cd /sys/kernel/tracing/ # while true; do cat events/user_events/__test_event/format; done 2>/dev/null With KASAN memory checking, it would trigger a use-after-free bug report (which was a real bug). This was because the format file was not checking the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the event that the file meta data pointed to after the event was freed. After inspection, there are other locations that were found to not check the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a new helper function: event_file_file() that will make sure that the event_mutex is held, and will return NULL if the trace_event_file has the EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file pointer use event_file_file() and check for NULL. Later uses can still use the event_file_data() helper function if the event_mutex is still held and was not released since the event_file_file() call. Link: https://lore.kernel.org/all/20240719204701.1605950-1-minipli@grsecurity.net/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Ajay Kaher <ajay.kaher@broadcom.com> Cc: Ilkka Naulapää <digirigawa@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Alexey Makhalov <alexey.makhalov@broadcom.com> Cc: Vasavi Sirnapalli <vasavi.sirnapalli@broadcom.com> Link: https://lore.kernel.org/20240730110657.3b69d3c1@gandalf.local.home Fixes: b63db58e2fa5d ("eventfs/tracing: Add callback for release of an eventfs_inode") Reported-by: Mathias Krause <minipli@grsecurity.net> Tested-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-08-07Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitorAnton Khirnov
This restores behaviour (including the comment) from now-removed hci_request.c, and also matches existing code for active scanning. Without this, the duplicates filter is always active when passive scanning, which makes it impossible to work with devices that send nontrivial dynamic data in their advertisement reports. Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Anton Khirnov <anton@khirnov.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-07Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()Dmitry Antipov
Add missing call to 'l2cap_chan_unlock()' on receive error handling path in 'l2cap_conless_channel()'. Fixes: a24cce144b98 ("Bluetooth: Fix reference counting of global L2CAP channels") Reported-by: syzbot+45ac74737e866894acb0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=45ac74737e866894acb0 Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-07Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdownBartosz Golaszewski
Unlike qca_regulator_init(), qca_power_shutdown() may be called for QCA_ROME which does not have qcadev->bt_power assigned. Add a NULL-pointer check before dereferencing the struct qca_power pointer. Fixes: eba1718717b0 ("Bluetooth: hci_qca: make pwrseq calls the default if available") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/linux-bluetooth/su3wp6s44hrxf4ijvsdfzbvv4unu4ycb7kkvwbx6ltdafkldir@4g7ydqm2ap5j/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-07Bluetooth: hci_qca: fix QCA6390 support on non-DT platformsBartosz Golaszewski
QCA6390 can albo be used on non-DT systems so we must not make the power sequencing the only option. Check if the serdev device consumes an OF node. If so: honor the new contract as per the DT bindings. If not: fall back to the previous behavior by falling through to the existing default label. Fixes: 9a15ce685706 ("Bluetooth: qca: use the power sequencer for QCA6390") Reported-by: Wren Turkal <wt@penguintechs.org> Closes: https://lore.kernel.org/linux-bluetooth/27e6a6c5-fb63-4219-be0b-eefa2c116e06@penguintechs.org/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-07Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390Bartosz Golaszewski
Now that we call pwrseq_power_off() for all models that hold a valid power sequencing handle, we can remove the switch case for QCA_6390. The switch will now use the default label for this model but that's fine: if it has the BT-enable GPIO than we should use it. Fixes: eba1718717b0 ("Bluetooth: hci_qca: make pwrseq calls the default if available") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-07igc: Fix qbv tx latency by setting gtxoffsetFaizal Rahim
A large tx latency issue was discovered during testing when only QBV was enabled. The issue occurs because gtxoffset was not set when QBV is active, it was only set when launch time is active. The patch "igc: Correct the launchtime offset" only sets gtxoffset when the launchtime_enable field is set by the user. Enabling launchtime_enable ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as LaunchT in the SW user manual). Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states: "The latency between transmission scheduling (launch time) and the time the packet is transmitted to the network is listed in Table 7-61." However, the patch misinterprets the phrase "launch time" in that section by assuming it specifically refers to the LaunchT register, whereas it actually denotes the generic term for when a packet is released from the internal buffer to the MAC transmit logic. This launch time, as per that section, also implicitly refers to the QBV gate open time, where a packet waits in the buffer for the QBV gate to open. Therefore, latency applies whenever QBV is in use. TSN features such as QBU and QAV reuse QBV, making the latency universal to TSN features. Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that the term "launch time" used in Section 7.5.2.6 is not clear and can be easily misinterpreted. Avi will update this section to: "When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission scheduling and the time the packet is transmitted to the network is listed in Table 7-61." Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to write to gtxoffset, aligning with the newly updated SW User Manual. Tested: 1. Enrol taprio on talker board base-time 0 cycle-time 1000000 flags 0x2 index 0 cmd S gatemask 0x1 interval1 index 0 cmd S gatemask 0x1 interval2 Note: interval1 = interval for a 64 bytes packet to go through interval2 = cycle-time - interval1 2. Take tcpdump on listener board 3. Use udp tai app on talker to send packets to listener 4. Check the timestamp on listener via wireshark Test Result: 100 Mbps: 113 ~193 ns 1000 Mbps: 52 ~ 84 ns 2500 Mbps: 95 ~ 223 ns Note that the test result is similar to the patch "igc: Correct the launchtime offset". Fixes: 790835fcc0cb ("igc: Correct the launchtime offset") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07igc: Fix reset adapter logics when tx mode changeFaizal Rahim
Following the "igc: Fix TX Hang issue when QBV Gate is close" changes, remaining issues with the reset adapter logic in igc_tsn_offload_apply() have been observed: 1. The reset adapter logics for i225 and i226 differ, although they should be the same according to the guidelines in I225/6 HW Design Section 7.5.2.1 on software initialization during tx mode changes. 2. The i225 resets adapter every time, even though tx mode doesn't change. This occurs solely based on the condition igc_is_device_id_i225() when calling schedule_work(). 3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only resets adapter for legacy->tsn tx mode transitions. 4. qbv_count introduced in the patch is actually not needed; in this context, a non-zero value of qbv_count is used to indicate if tx mode was unconditionally set to tsn in igc_tsn_enable_offload(). This could be replaced by checking the existing register IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit. This patch resolves all issues and enters schedule_work() to reset the adapter only when changing tx mode. It also removes reliance on qbv_count. qbv_count field will be removed in a future patch. Test ran: 1. Verify reset adapter behaviour in i225/6: a) Enrol a new GCL Reset adapter observed (tx mode change legacy->tsn) b) Enrol a new GCL without deleting qdisc No reset adapter observed (tx mode remain tsn->tsn) c) Delete qdisc Reset adapter observed (tx mode change tsn->legacy) 2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed" to confirm it remains resolved. Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07igc: Fix qbv_config_change_errors logicsFaizal Rahim
When user issues these cmds: 1. Either a) or b) a) mqprio with hardware offload disabled b) taprio with txtime-assist feature enabled 2. etf 3. tc qdisc delete 4. taprio with base time in the past At step 4, qbv_config_change_errors wrongly increased by 1. Excerpt from IEEE 802.1Q-2018 8.6.9.3.1: "If AdminBaseTime specifies a time in the past, and the current schedule is running, then: Increment ConfigChangeError counter" qbv_config_change_errors should only increase if base time is in the past and no taprio is active. In user perspective, taprio was not active when first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is enabled with a dummy schedule at step 2 where it enters igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it enters igc_tsn_enable_offload() again, qbv_count is incremented to 2. Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and qbv_count > 1, qbv_config_change_errors value got incremented. This issue happens due to reliance on qbv_count field where a non-zero value indicates that taprio is running. But qbv_count increases regardless if taprio is triggered by user or by other tsn feature. It does not align with qbv_config_change_errors expectation where it is only concerned with taprio triggered by user. Fixing this by relocating the qbv_config_change_errors logic to igc_save_qbv_schedule(), eliminating reliance on qbv_count and its inaccuracies from i225/6's multiple uses of qbv feature for other TSN features. The new function created: igc_tsn_is_taprio_activated_by_user() uses taprio_offload_enable field to indicate that the current running taprio was triggered by user, instead of triggered by non-qbv feature like etf. Fixes: ae4fe4698300 ("igc: Add qbv_config_change_errors counter") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07igc: Fix packet still tx after gate close by reducing i226 MAC retry bufferFaizal Rahim
Testing uncovered that even when the taprio gate is closed, some packets still transmit. According to i225/6 hardware errata [1], traffic might overflow the planned QBV window. This happens because MAC maintains an internal buffer, primarily for supporting half duplex retries. Therefore, even when the gate closes, residual MAC data in the buffer may still transmit. To mitigate this for i226, reduce the MAC's internal buffer from 192 bytes to the recommended 88 bytes by modifying the RETX_CTL register value. This follows guidelines from: [1] Ethernet Controller I225/I22 Spec Update Rev 2.1 Errata Item 9: TSN: Packet Transmission Might Cross Qbv Window [2] I225/6 SW User Manual Rev 1.2.4: Section 8.11.5 Retry Buffer Control Note that the RETX_CTL register can't be used in TSN mode because half duplex feature cannot coexist with TSN. Test Steps: 1. Send taprio cmd to board A: tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 4 \ map 3 2 1 0 3 3 3 3 3 3 3 3 3 3 3 3 \ queues 1@0 1@1 1@2 1@3 \ base-time 0 \ sched-entry S 0x07 500000 \ sched-entry S 0x0f 500000 \ flags 0x2 \ txtime-delay 0 Note that for TC3, gate should open for 500us and close for another 500us. 3. Take tcpdump log on Board B. 4. Send udp packets via UDP tai app from Board A to Board B. 5. Analyze tcpdump log via wireshark log on Board B. Ensure that the total time from the first to the last packet received during one cycle for TC3 does not exceed 500us. Fixes: 43546211738e ("igc: Add new device ID's") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07ice: Fix incorrect assigns of FEC countsMateusz Polchlopek
Commit ac21add2540e ("ice: Implement driver functionality to dump fec statistics") introduces obtaining FEC correctable and uncorrectable stats per netdev in ICE driver. Unfortunately the assignment of values to fec_stats structure has been done incorrectly. This commit fixes the assignments. Fixes: ac21add2540e ("ice: Implement driver functionality to dump fec statistics") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07ice: Skip PTP HW writes during PTP reset procedureGrzegorz Nitka
Block HW write access for the driver while the device is in reset to avoid potential race condition and access to the PTP HW in non-nominal state which could lead to undesired effects Fixes: 4aad5335969f ("ice: add individual interrupt allocation") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07ice: Fix reset handlerGrzegorz Nitka
Synchronize OICR IRQ when preparing for reset to avoid potential race conditions between the reset procedure and OICR Fixes: 4aad5335969f ("ice: add individual interrupt allocation") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-07wifi: rtlwifi: rtl8192du: Initialise value32 in ↵Bitterblue Smith
_rtl92du_init_queue_reserved_page GCC complains: In file included from include/linux/ieee80211.h:21, from include/net/mac80211.h:20, from drivers/net/wireless/realtek/rtlwifi/rtl8192du/../wifi.h:14, from drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:4: In function 'u32p_replace_bits', inlined from '_rtl92du_init_queue_reserved_page.isra' at drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:225:2: >> include/linux/bitfield.h:189:18: warning: 'value32' is used uninitialized [-Wuninitialized] Part of the variable is indeed left uninitialised. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408062100.DWhN0CYH-lkp@intel.com/ Fixes: e769c67105d3 ("wifi: rtlwifi: Add rtl8192du/hw.{c,h}") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/2a808244-93d0-492c-b304-ae1974df5df9@gmail.com
2024-08-07Merge tag 'for-6.11-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix double inode unlock for direct IO sync writes (reported by syzbot) - fix root tree id/name map definitions, don't use fixed size buffers for name (reported by -Werror=unterminated-string-initialization) - fix qgroup reserve leaks in bufferd write path - update scrub status structure more often so it can be reported in user space more accurately and let 'resume' not repeat work - in preparation to remove space cache v1 in the future print a warning if it's detected * tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: avoid using fixed char array size for tree names btrfs: fix double inode unlock for direct IO sync writes btrfs: emit a warning about space cache v1 being deprecated btrfs: fix qgroup reserve leaks in cow_file_range btrfs: implement launder_folio for clearing dirty page reserve btrfs: scrub: update last_physical after scrubbing one stripe btrfs: factor out stripe length calculation into a helper
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 01:40:37 +0000